Used Sam Ag Hilfe for sale (6,412)

Condition: excellent (used), Year of construction: 2002, – Collection tray for hazardous substances with a collection volume of 205 litres. Bedpfjncd Ngjx Abcswh – Load capacity 1,000 kg with an evenly distributed load. – Year of construction 2002 (good condition) – Basic dimensions: 850 x 1,350 x 1,130 mm – Transport by forwarding agent possible on request.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section Bodpoxft I Asfx Abcewh - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.

Condition: new, Year of construction: 2025, functionality: fully functional, Stock machine: Subject to prior sale - Glass bead saw / double mitre saw Exenso DS350 - 3,000 mm for wooden glass beads, glazing bars, profile strips, aluminium trims, etc. Swivel range from 22.5° (internal) to 135° (external) Right-hand head is movable. Saw blade holder Ø 350 mm Working length 3000 mm - Includes 1 central support. - Pneumatic clamping of the units. - Positioning control Exenso DS3 with touch panel - 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swing axes. - Manual input of cutting data - Processing of data from a cutting list (data records as specified) - Processing of measuring gauge data (wireless GMF caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor and software licenses. 1.2 723.0121 DS/ES saw blade for wood, 2 pcs. Bwodpfx Asw Exaasbcoh 1.3 942.5997 DS Pneumatic feed device, 1 set 1.4 942.5236 DS Combined workpiece clamp, 2 sets 1.5 942.5241 DS350 Grooved table supports, 1 pc. 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Year of construction: 2004, condition: refurbished (used), Precision feed for tapes up to approx. 100mm to 2mm Feed force 400 N Repeat accuracy +/- 0.04 mm Bwjdpfxjg Iiuxe Abcoh

Year of construction: 2018, condition: as good as new (ex-display), Belt width max. 140 mm Strip thickness up to 1.5 mm Accuracy +/- 0.05 mm Bwedpfx Abscn Dv Njcoh Tensile force 500 N ( 50 kg).

Year of construction: 2023, condition: like new (used), width 600 mm accuracy 0,04 mm force max 3000N waranty 2 Years Bwjdpolczm Iofx Abcoh

Year of construction: 2020, condition: as good as new (ex-display), plasma nitrided rolls 64 HRC, max sheet thickness 3 mm, Bwodpjg Ew Ixofx Abceh max. width 120 mm, repeatability +/- 0,06 mm at 50 mm feed 350 HUB/ min. 180° clearance angle

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy Bedpfx Asxl A Edsbcewh • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Bwsdpfewydbxox Abcjh ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 01/40360/1117, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Factory-refurbished measuring table SN 01/40360/1117 (year of manufacture: 2017) – Subject to prior sale - Operating system: Windows 10 For measuring external dimensions and one-sided inspection of vertical and horizontal boreholes in panel-type workpieces. APPLICATION AREA: Setup assistance: Measurement of first-off sample parts Random inspection: Measurement of sample pieces MEASUREMENT CRITERIA: Dimensions: Length, width, angles Borehole, vertical: Position, diameter, depth, borehole distances Borehole, horizontal: Position, diameter, depth, distance to the panel surface (NOTE: Test pins or inserted dowels are required) Groove: Edge distance, width, depth Radius: Center position, radius Rebate: Width, depth Cutouts: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: Measurement of vertical and/or horizontal boreholes as well as grooves and rebates on the Y-axis is possible up to 1,150 mm position) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/-0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy – independent of daylight) Measuring surface: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor level: approx. 1,000 mm +/- 50 mm Required space (L/W/H): approx. 5,000 mm/ 2,000 mm/ 1,700 mm Weight approx.: 2,400 kg + control cabinet including operator panel approx. 200 kg Total electrical connected load: 2,500 W Compressed air connection: 6 bar Operator side: left Operating voltage: 230V/16A (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: For higher temperatures, a climate control unit in the control cabinet is recommended – available as an option.) Bjdew Ev N Sjpfx Abcowh Technical changes reserved. The above performance data assume suitable workpieces are used. Scope of delivery: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x CAD4U software license and HECHT interface for measurement program creation on a PC in work preparation ⦁ 19” PC with CAD4U software license and interface for measurement program creation, current software version Results and Driver for program execution, image processing software ⦁ Camera, lens, and lighting for image capture ⦁ Operating system: Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring lateral boreholes: 10 pcs each with a diameter of 5, 6, 8 mm ⦁ 4 x corner angles for black parts ⦁ SQL Express database installed on the machine PC Languages: The operator software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian, and Chinese. Additional languages available on request. SAFETY AND PROTECTION DEVICES Emergency stop switch unit All machines for EU member countries with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be fully enclosed with a safety fence. This and other safety devices are not included in the delivery.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,500 mm, measuring range Y-axis: 100 mm, measuring range Z-axis: 65 mm, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15" touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeat accuracy X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeat accuracy Z +/- 0.02 mm Resolution 0.01 mm Measurement capabilities: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Squareness ⦁ Parallelism ⦁ X/Y hole positions ⦁ Bore diameter ⦁ Bore depth (relative) ⦁ Radii / diameters ⦁ Groove position ⦁ Groove depth (relative) ⦁ Rebating position ⦁ Rebating depth (relative) ⦁ X/Y/Z position of horizontal boreholes ⦁ Depth of horizontal boreholes (relative) Measuring program: 8-point measurement for rectangular parts (e.g. rectangle, parallelogram, or trapezoid) Process: 8 points of the workpiece are scanned (two points per edge at each corner) Result: Displays 2 x length (top, bottom), 2 x width (right, left), 4 x angles Report: When nominal values and tolerances are entered, an actual/target comparison is generated and deviations are displayed in tabular form. Results can be saved as PDF (report) or in an SQL database for statistical analysis. Inspection and documentation of manufacturing status possible during the production process: after cutting, after edge-banding, or after drilling, depending on value creation. Vacuum system (Venturi principle): 6 vacuum suction cups integrated in the measuring field secure the workpiece during measurement. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power supply: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Bedpfxsw Ew Dqs Abcswh Operation/control: 15" touchscreen HECHT DesQ II software Windows 10

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. Bsdovcyw Aopfx Abcowh position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min.

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Bjdpewrp Hksfx Abcjwh Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: used, US-2100 - 75 mm Bwodpfx Abewrp Insceh Increasingly wider bands are being demanded for the logistical and sales-promoting bundling of units. The US-2100 with its unique ultra-sonic sealing processes paper and plastic bands with a width of 75 or 100 mm. The bands offer plenty of space for printing marketing-related information. The machine is easily accessible, usable in small spaces, and offers high safety.

Year of construction: 2011, condition: used, For sale are three used vertical centrifugal free flow pump from Emile Egger Pumpe & Co. AG from the year 2011. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 214050 and T 214050 Year of construction: 2011 L/s: 2,77 1/min: 1800 Bedpfx Asga Drqobcswh m: 14,7 Connections: DN50 and DN65 length: 192cm Quantity: 3 Motor data: Manufacturer: VEM motors GmbH Year of manufacture: 07/2011 Type: IEC/EN 60034-1 Number: 186889/0003, 186889/0001H and 186889/0002H kW: 5,5 HP: 7,5 V: 400 A: 10 1/min: 1470

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2838 664, type of input current: AC, overall weight: 4,710 kg, input voltage: 16,800 V, input frequency: 50 Hz, total height: 1,820 mm, total width: 1,270 mm, total length: 1,920 mm, nominal power (apparent): 2,000 kVA, secondary voltage: 420 V, protection type (IP code): IP54, temperature: 40 °C, empty load weight: 4,710 kg, space requirement width: 1,270 mm, space requirement length: 1,920 mm, space requirement height: 1,820 mm, input current: 2,750 A, Equipment: type plate available, Three-phase oil transformer according to IEC 60076, hermetically sealed design suitable for ambient temperatures from -25°C to 40°C and maximum installation altitude of 1,000 m above sea level, for outdoor installation, with aluminium windings, routine test according to IEC60076, in accordance with Regulation (EU) No. 548/2014 of 21.05.14 Stage 2, valid from 01.07.2021. Bwjdpexb A Hgofx Abcoh

Condition: excellent (used), Year of construction: 2022, operating hours: 7,500 h, functionality: fully functional, The used Sypro Dual 200 basic feed unit for UPS 3 for continuous or intermittent blister lines (width 700mm) is being sold due to the purchase of a new system. The machine was commissioned at the end of 2022. Tablet buffer supply with reject separation, 500mm buffer hopper, and 2 feed chutes. The first chute conveys products from the buffer hopper. In the second chute, products pass between two plates. The lower plate has holes through which broken pieces fall out. Removable tablet storage funnel. Axis: All axes are driven by servo motors. The feeder features the following axes: X, Y (crosswise and lengthwise to the film), upper and lower pin actuators for separation, Z-stroke for lifting from the film. Control: Machine control via Sigmatek RPS. Up to 500 products can be saved with all settings. Four access levels. Event logging. Performance: Throughput of the basic unit: 60 dosing cycles/min max. Maximum film speed: 20m/min Documentation: Various maintenance manuals Noise level: < 70dBA Bedpfx Absw Npgqocowh

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 2,889 mm, space requirement length: 11,292 mm, space requirement height: 2,675 mm, overall weight: 36,000 kg, temperature: 150 °C, operating pressure: 6 bar, pressure: 6 bar, power: 110 kW (149.56 HP), type of input current: AC, operating temperature: 150 °C, Equipment: documentation/manual, Equipment Type: Dry Product Capacity: Circa 500kg/hr Design Conditions: 150oC; 6barg/ Full Vacuum Materials of Construction (Product Wetted): 304L SS, Viton O-Ring, PTFE Reinforced Flat Gaskets Electric Motor: 3 Pole / 480V / 60Hz, 110kW, 1780 rpm, Eex de IIB T4, IP 65; Horizontal, Single-Shaft, Continuous, Vacuum Kneader- Dryer Single step direct (contact) evaporation/drying process 3 heating zones on shell, 2 heating zones on agitator Twin screw feeder General Applications: Drying of products exhibiting multiple phase change e.g. Liquid –> highly viscous –> pasty–> free flowing powder or granular solid Ability to handle foaming, stickiness, crusting & required variation of temperature and drive input requirements Self-cleaning design and heavy duty/high torque to promote heat and mass transfer Potential Applications: Bodpot Uqldsfx Abcswh Drying of a crystalline mass, e.g. Anti-Oxidants: Typical solvents: Methanol, Cyclohexane, Isopropanol Industrial Residues: Recovery of hazardous / valuable materials from wastes. E.g. TDI (Polyurethane monomer) from distillation residue Drying of paint and lacquer sludge Recovery of water/toluene from rubber residues Recovery of solvents from vitamin distillation residues Polymerisation Reactions..

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro Bwjdpfer I Am Hsx Abcoh

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. Bwodsr Ix Igopfx Abcoh The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Year of construction: 1974, condition: excellent (used), Cryogenic tank rail cars, gas, wagons, tank wagons, gauge, CO2, carbon dioxide, storage CO2 gas wagons, tank wagons, carbon dioxide, transportation, cryogenic tank rail cars, storage They are constructed to storage liquid CO2. manufacturer: Rheinstahl AG year of manufacture: 1974 volume: 51,79 m3 pressure: 20 bar test pressure: 30 bar Export from EU Bsdpfehfv Ehex Abcowh carbon dioxide, transportation, LCO2, gas. Please contact us for more details.

Condition: good (used), Year of construction: 2000, Leutenegger (Starrag) Wash Box Technical Specifications Year of Construction: 2000 Bath Volume: approx. 0.9 m³ Chemicals: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply Cable: 40 A Control Voltage: 24 V DC Bodpfsd Ncihjx Abcjwh Maximum Temperature: 50° C Electric Heating Heating Output: 3x3.25 kW = 9.75 kW Working Pump: 3 kW Exhaust Fan: 0.37 kW Exhaust Air Flow: 400 m³/h Shipping Costs Upon Request Find more items - new and used - in our shop! International shipping costs upon request!

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, UES Perfectmelt hotmelt glue unit equipped with 4 hose connections and an automatic filling system (glue granules). This glue unit is compatible with Nordson (Ni120) due to the hose connections and the plugs on the glue hoses. Bwsdjvt A Sqjpfx Abceh UES AG is a supplier of (German) quality machines (hotmelt). They supply systems that can be connected to your existing glue equipment, in this case Nordson. This unit was tested for a short time at a customer and is in perfect condition.

Condition: used, machine/vehicle number: 10169, Lederschärfmaschine / Leather Skiving machine Fortuna 50 PU-AGSchärfbreite / skiving width 0 - 50mm Schärfwinkel / skiving angle 0° - 20° Führungselement / operation Fuß Vorschub Stufenlos per Kupplung regelbar / feed stepless Vorschubgeschwindigkeit 270, 350, 520, 650mm/s Absaugung Späne und Staub Motordrehzahl 1400min-1 Anschlussspannung / power supply 380 V, 3-Phasen, 50 Hz Bemessungsleistung 0,55kW Abmessungen / Dimensions L1050 x B550 x H1160mm Gewicht / weight ca. 130KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bwedpfxoh I Rh Ho Abcsh Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new Bwjdpfx Abeyb S Dvjcsh