Used Sanding Belt for sale (9,838)

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 0084603, workpiece width (max.): 300 mm, Equipment: double-sided, VG FANTASTIC 300 SANDER CALIBRATION VG MACHINES MODEL Klsdpfxexiycuj Abcop DOUBLE-SIDED FANTASTIC F/G 300 - 3KKS/3KKS - Working width: 300 mm - Total installed power: 37 kW - Configuration: RRT/RRT (lower roller + upper roller) - Motors: 2x (7.5 + 7.5 + 7.5) Belt width: 1900 x 300 mm

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Ksdpoya I Iuefx Abcolp Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre 1. Cross sanding unit - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Kledpfx Ajya I Riobcep Space requirement approx. 2550 x 2675 x 2400 mm

Condition: excellent (used), !!!DEMONSTRATION MACHINE!!! For sale is an as-new JET DDS-237 sanding machine with a maximum sanding width of 940 mm. The machine is in excellent condition and has been refurbished and inspected by our specialist staff. (Fully functional) Technical data: - Double drum sander JET DDS-237 - Motor: 400 V / 7.5 HP - Sanding drum speed: 1,400 rpm - Feed speed: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Extraction port: 2 x diameter 100 mm Kodex Sqzvepfx Abcelp - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: column drill, pillar drill, drilling machine Reference: R-D1618

Condition: excellent (used), Wide Belt Sander SCM Sandya 30 RT Ksdpfx Aboyh N Icscelp Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Calibration drum Unit with segmented shoe Motor power: 1. 15 kW 2. 11 kW Optical oscillation Abrasive belt dimensions: 2620x1115 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. Klodpfsv S Sr Rex Abcsp The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements Kljdpfxjtwb U Ae Abcep - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Kedpsvvki Nofx Abcolp Storage location: Nattheim

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Storage location: Nattheim Kodpfxsvvkkas Abcolp

Condition: excellent (used), CATALOG NUMBER 7773 TECHNICAL DATA - Max width of workpiece: 900mm - Max height of workpiece: 160mm – Top: - Metal pressure roller, slip type I unit – Calibrating rubber grooved roller II unit – 2x Metal calibrating roller + shoe – Bottom: - Feed belt - Pneumatic oscillating belt - Electric table lifting - Main motor 15kW/11kW - Feed motor 1.5kW Kledpfxeykaxms Abcjp - Operating pressure 6-8 bar - Dust extraction port diameter 2x200mm - Dimensions (L/W/H): 1850x1950x2040mm - Weight approx. 3000kg ADVANTAGES – Italian manufacture – Calibrating sander + pad – Used sander, very good condition Net price: 15,900 PLN Net price: 3,780 EUR (at 4.2 EUR exchange rate) (Prices may change with significant fluctuations)

Condition: used, functionality: fully functional, machine/vehicle number: SA002337, Technical data: Kledpfjyn N Dgox Abcjp Working width: 1135 mm 1 Combination unit Shaft diameter: 210 mm Max height of processed material: 160 mm Sanding belt dimensions: 1135x2200 mm Electric lifting Digital display Safety switch Main motor power: 11 kW Voltage: 380V Operating pressure 8 bar Adjustable feed speed Overall dimensions: Depth: 1500 mm Width: 1800 mm Height: 2300 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single belt machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off Segment width of the pressure beam: 35mm Contact roller pneumatically adjustable, low wear thanks to grooved steel roller Grit compensation Drive motor 7.5kW with automatic motor brake, infinitely variable belt speed controlled by frequency converter from 2 - 18 m/s Feed belt speed infinitely adjustable via frequency inverter from 2.5 - 13m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the outfeed Constant working height at 900mm by adjustment of the machine's top section, making it integrable into sanding lines Feed belt is still very grippy and in excellent condition Maximum sanding width approx. 1090mm Workpiece height approx. 3 to 150mm Standard sanding belt size 1120 x 1900mm 3 rubber-coated pressure rollers Infeed roller table and foldable outfeed table Preparation for vacuum blower. The conveyor belt is perforated, and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to an extraction system. Kodpfx Absym Du Rjcelp Extraction connection: 1 x 180mm, 1 x 140mm, and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam application points front and rear, edge segments, belt blow-off nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE mark Operating manual (Delivered) without the connection cable shown Original paint, only repainted in a few areas Approx. 592 operating hours, about 40 minutes per week on average. Dimensions approx. 1800 (with table 2600) x 1800 x 2150mm (LxWxH). Weight approx. 2200kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available from our warehouse, see 'Other offers from this provider.'

Condition: excellent (used), Vertongen M-300 Combi Throughfeed Sander Working width: 300 mm Working height: up to 200 mm Combi unit with pad Pneumatic oscillation Manual raising and lowering of the work table Two feed speeds Kledpfx Absyhn S Ascep Main motor: 5.5 kW Abrasive belt: 300x1900 mm Weight: approx. 600 kg

Condition: excellent (used), Through-feed sander Tornado Euro 300 Working width: 300 mm Working height: up to 180 mm Combi unit with pad Main motor power: 4 kW Kledpfx Absyhltkecsp

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CALIBRATION LINE Costa double calibrating sander (bottom and top) Working width: 1650 mm Feeding system: Motorized conveyor belt with variable speed Bottom unit: 3 sanding drum groups 1 electronic pad unit Cleaning system with blowers and brushes Top unit: 3 sanding drum groups 1 electronic pad unit Cleaning system with blowers and brushes Unit power: from 18.75 to 75 kW (depending on group) Control: PLC with touch screen Ksdpfx Abjyr R Inecjlp Safety: Sensors and emergency stop Only 169 operating hours

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW 2nd Sanding Unit Kledpfx Aboyt Nvyocjp Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Total weight: 4,100 kg

Condition: as good as new (ex-display), functionality: fully functional, grinding height: 200 mm, power: 11.03 kW (15.00 HP), grinding belt speed: 18,000 mm/s, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, input frequency: 50 Hz, input voltage: 400 V, Additional technical data Feed speed: 2.8 - 20 m/min The new Format4 findustry wide belt sanders impress in industrial applications primarily through their individually configurable assembly of units. Tailored specifically to the application and field of use, the machine can be equipped with two, three, or four units. A high degree of customization guarantees that all requirements in terms of surface finish and processing efficiency are met. Maximum operating comfort in industrial applications The clearly structured touchscreen control panel is intuitive to operate. All machine functions are clearly displayed graphically on the digital display. The pass-through thickness can be set directly from the control panel to a tenth of a millimeter at the touch of a button. Automatic thickness measurement simplifies the adjustment of the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and its thickness is then transmitted directly to the machine "wirelessly." The fixed infeed table height of 900 mm allows for easy and fatigue-free operation, while a vacuum table, roller table extensions on both infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure maximum comfort and optimal processing conditions for workpieces of any size. Optional equipment 10E LACQUER – Cross sanding unit ESC in place of 1st contact roller 20A 2nd contact roller unit 22 2nd sanding roller in 85° Shore 30E LACQUER – Superfinish unit ESC in place of 3rd contact roller 39 Switch contact for slide control (price/piece) *6 51 Soft start for 15kW (20HP motor) 59B Control unit with 15" color touchscreen display 63 Scotch-Brite brushing device at the machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor belt 72 Ionizing bar at the machine outfeed 73 Vacuum table with 4kW (5.5 HP) blower 74 Inverter for vacuum blower for vacuum adjustment 83 Sanding height 200mm instead of 170mm Kjdpfx Aboxtpydecjlp 84 Optimized control software for special processing 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15kW power output Additional information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation in post code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Kledpfsvf D S Asx Abcjp Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: excellent (used), Catalogue number 7431 TECHNICAL DATA - Max workpiece width: 950mm - Max workpiece height: 150mm Top: - Metal pressure roller - Unit (profiled rubber roller for calibration + pad shoe + metal roller) - Smooth, metal sliding roller Bottom: - Feed belt - Pneumatic oscillation of belts with photocells - Electric table lifting Kedpfxjyh H Tve Abcjlp - 2 feed speeds - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Working pressure: 8 bar - Extraction connection diameter: 150mm - Dimensions (L/W/H): 1600x1250x2000mm - Weight: 1109 kg ADVANTAGES – German manufacturing – Additional pad shoe included – Used sander, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW Klodpfx Aex Swtxsbcop - Main motors: 2 x 4 kW - Air requirement: 6-8 bar - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting Kedpfoyh H Aqjx Abcjlp 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame HEMA PSM 300 Universal Profile Grinder - Automatic belt tensioning - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm Klsdpfx Asyl Ilwsbcop - Very quiet operation - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner

Condition: excellent (used), Through-feed sander Vertongen S320 Working width 300 mm Working height up to 180 mm Combi unit with pad Manual raising and lowering of the working table Two feed speeds: 7–14 m/min Kljdeyg Dlcopfx Abcep Main motor 5.5 kW

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: A11108GM1, Costa K6 CCC 1350 Wide Belt Sander Year of production: 2001 Technical condition: very good after major renovation at COSTA in 2023 Costa K3 CCC 1350 Wide Belt Sander sander from 2001 is a solid industrial machine designed for sanding and calibrating wooden surfaces. The machine has a fixed table and a movable working part with rollers Fixed working height of 890 mm can be installed in a line The additional machine has a vacuum table powered by its own fan Here are the key technical data of this machine: Kljdpfxowczkio Abcop - Sanding width: 1350 mm - Number of sanding units: 3 (steel calibration shaft, 2x rubber shaft - Cleaning or sanding brush Length of the sanding belt 3250mm

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size Kljdpfx Aek Dpp Sebcjp - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -