Used Sanding Belt for sale (9,757)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Kodpjudxchefx Abceww Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Kjdpfx Abjtwzyfscjww Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Kwsdpfxev D H Sie Abcow Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: Ksdouxnyuepfx Abcoww - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), functionality: fully functional, Wide belt sander SCM Sandya 10 Kwsdoyuclwepfx Abcow Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 1. Calibrating roller 2. Combi unit with pad CE certificate Main motor power: 11 kW

Condition: used, Bütfering ECO 111 Electronic Wide Belt Calibration and Fine Sanding Machine Contact Roller Unit 85 SH CPS Electronically Controlled Segmented Sanding Pad Working width 1100 mm Terminal for various work programs with selector switch and LED display Motor power approx. 11 kW Brush Cleaning Unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Kedpoyuxkpofx Abcsww Machine is FACTORY-REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2002, This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine. Kjdpfjx D Dp Ujx Abcjww Application Types Sanding

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring steel contact roller and electronic CPS segmented pressure beam with 25 mm divisions Kwjdowka Snopfx Abcow - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt air-blast device - Vacuum conveyor belt with blower Control: - Terminal with 50 program memory slots - Simple menu guidance with plain text display - Visual indication of active elements during operation - Fully automatic PLC-controlled start sequence for all drives - Digital recording of operating hours Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction connectors: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air requirement: 10 l/min Weight: 2,200 kg Availability: by arrangement Location: Röllbach

Condition: used, Used machine Long belt sander Motor power: 4 PS / 3 kW Engine speed 2890 rpm Kwsdpfxewka I Ae Abcow Table dimensions approx. 2460 mm x 900 mm Manual table height adjustment Transport dimensions approx. 3600 x 1600 x 1450 mm Weight approx. 500 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension Kwsdswka S Uopfx Abcsw with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), Catalogue number 7717 TECHNICAL DATA - Workpiece length: 2780mm - Workpiece width: 800mm - Main motor: 4.2kW - Grinding belt width: 150mm - Right/left rotation - Electric table height adjustment (up/down) - Extraction nozzle diameter: 180mm - Overall dimensions (L/W/H): 4000x1520x1540mm - Weight: 637kg ADVANTAGES – Not repainted – Electric table adjustment – Used sander, in very good condition Net price: 9500 PLN Kjdpfjytdgtsx Abcsww Net price: 2260 euros depending on the exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Dedusting brush: yes Motor power: 2 x 15kW Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim Kwedpfxsw I U N Ij Abcew

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Kjdpew Naansfx Abceww Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: excellent (used), functionality: fully functional, Wide Belt Sander CB KRT1N1030 Working width: 1000 mm Number of units: 1 1 combination unit with pad Kwedpoyn Dy Aofx Abcjw Optical oscillation Two feed speeds Main motor power: 5.5 kW Electric lifting of worktable Digital height readout CE certificate

Condition: excellent (used), functionality: fully functional, Vertongen M-300 Combi Throughfeed Sander Working width: 300 mm Working height: up to 200 mm Combi unit with pad Pneumatic oscillation Ksdpfx Aboyn Aqascsww Manual raising and lowering of the work table Two feed speeds Main motor: 5.5 kW Abrasive belt: 300x1900 mm Weight: approx. 600 kg

Condition: used, Technical data: Working width: 1100 mm 1 Calibrating unit Roller diameter: 160 mm 2 Combination units Roller diameter: 160 mm Workpiece height: 160 mm Kodpeyv Arzsfx Abcsww Sanding belt dimensions: 2200x1130 mm Extraction port diameter: 2x140 mm Electric lifting Digital display Emergency stop switch Total power: 13 kW Voltage: 380 V Overall dimensions: Length: 1900 mm Width: 1800 mm Height: 2400 mm

Condition: used, Year of construction: 1985, total width: 1,650 mm, total height: 2,400 mm, total length: 1,820 mm, Price: On request Kwjdpfx Asykalgobcew - Year: 1985 - Documentation available: No - CE certificate present: No - Serial number: 85093286 - Number of units [pcs]: 2 - └ Unit 1: - - Sanding belt width [mm]: 750 - - Roller diameter [mm]: 260 - - Motor power [kW]: 11 - └ Unit 2: - - Sanding belt width [mm]: 750 - - Roller diameter [mm]: 260 - - Motor power [kW]: 11 - Max. working width [mm]: 810 - Max. working height [mm]: 160 - Infeed table length [mm]: 230 - Outfeed table length [mm]: 200 - Feed motor [kW]: 1.5 - Power [kW]: 25.0 - Transport dimensions: 1820mm x 1650mm x 2400mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NO. 7728 TECHNICAL DATA - Workpiece length: 2800mm - Workpiece width: 1250mm - Main motor: 5.5kW - Sanding belt width: 150mm - Belt air cleaning - Pneumatic hold-down - Right/left rotation - Electric table height adjustment up/down - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 3950x1500x1450mm - Weight: approx. 700kg Kwodoya Hmvepfx Abcsw ADVANTAGES – Unpainted – Electric table adjustment – Belt air cleaning – Pneumatic hold-down – Used sander, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6929 TECHNICAL DATA - Workpiece length: 2800 mm Kwedpfxex Swuie Abcjw - Workpiece width: 950 mm - Main motor: 5.5 kW - Fan motor: 2.2 kW - Sanding belt width: 160 mm - Extraction port diameter: 185 mm - Right/left rotation - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight: approx. 1000 kg ADVANTAGES – Not repainted – German manufacture – DTR technical documentation – Used sander, very good condition Net price: 8,900 PLN Net price: 2,120 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (The price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA K CCC 1350, year 2004. Configuration: 55 KW steel calibration cylinder 45 KW hard rubber cylinder 37 KW soft rubber cylinder. Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. 3 motors 55 + 45 + 37kW Including full documentation. Kwedpot Rn E Tjfx Abcjw Condition very good ! Available immediately.

Condition: excellent (used), CATALOG NUMBER 7037 Kwjdpfx Absx Swvascjw TECHNICAL DATA - Workpiece length: 2780 mm - Workpiece width: 800 mm - Main motor: 4 kW - Sanding belt width: 150 mm - Fan - Forward/reverse rotation - Electrical table height adjustment (up/down) - Extraction port diameter: 140 mm - Overall dimensions (L/W/H): 3760x1440x1520 mm - Weight: 502 kg ADVANTAGES – Not repainted – With fan – Electric table adjustment – Used sander, very good condition Net price: 9500 PLN Net price: 2260 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Kwedpfsyquzcox Abcsw Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2002, operating hours: 27,518 h, Empty weight: 7.500 kg BOERE sanding line 'Compact' Elite Year of construction 2002 (CE) Operating hours 27518 Maximum height 150 mm Maximum width 1100 mm Elite BKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 128Amp Elite TKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 117Amp - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: - Operating hours: 27518 - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 2 Financial information Kedpfx Aswng Hmsbcoww VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Kwodpfx Aboytrf Rocsw Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Kwsdpfxsytrfke Abcjw