Used Saw Shaft Construction for sale (29,076)

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable Kedpod N H A Njfx Adwedg - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Amada, _____ Description: Year of manuf. : 2022 Material: Round material:Ø 20 -101.6 mm Rectangular material:20 - 80 mm Cut length:10 - 6,000 mm Saw blade: Design:Disposable carbide saw blades Dimensions:Ø 360 x 2.0 mm Saw: Cutting speed:automatic control Revolutions:55- 180 Feed rate:0 -30 mm/sec Drive power:11 kW x 4P Horizontal clamping pressure:15.2 kN Vertical clamping pressure:3.9 kN Feed system: Drive system:AC servo + ball screw Feed length:715 mm Feed speed:30 m/min Bar loader: Max. diameter:100 mm Standard length:6,500 mm Magazine extension:By 2,000 mm Sorting section:With 2 switches Kdedpfxeyad A Ue Adweg Equipment: Material feed:Bar feeder Chip disposal:Chip conveyor Emulsion mist separator:Air Champion

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Kdjdpfx Ajxrg E Iedwjg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min Kjdpfx Adevx Hugewedg - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, cutting length (max.): 600 mm, Automatic Wood Sawing and Splitting with the RM480-E from H&R. The H&R Wood Processor RM480-E is the ideal assistant for your firewood processing operations. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to its innovative design and powerful hydraulic system, operating this wood processor is significantly simplified—ideal for professional forestry operations and ambitious DIY users alike. Unlike competing models, with the RM480 from H&R, ALL functions are hydraulically operated, allowing for faster and easier workflow. Product Features RM480-E Performance: This processor is equipped with a robust 13 HP electric motor. Alternatively, it is also available with a 15 HP petrol engine (RM 480 B). Log Length and Diameter: Logs up to 3 meters in length can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths of up to 60 cm. Hydraulic System: The machine features a hydraulically lowering saw bar. The hydraulic log clamp ensures secure fixation of the wood during splitting operations. Hydraulic height adjustment of the splitting wedge is possible. You can choose between the included 4-way or 6-way splitting cross—for flexible splitting patterns and individual adaptation to your needs. Conveyor Belt: The new 2.2 m long feed belt makes loading logs easier, while the lateral swivel discharge conveyor makes the removal of split wood effortless. Mobile Operation: The processor—including trailer—weights just 750 kg and can be easily moved by hand thanks to its practical transport frame. Simple Operation: All functions can be conveniently operated hydraulically, enabling long working hours without fatigue. At a glance: • Sawing, splitting, and conveying in a single work step • All functions hydraulically operated • Efficient and powerful motor • Splits wood up to 48 cm in diameter and 60 cm in length • Can handle logs up to 3 m in length (with accessory table even up to 6 m!) Price Electric Motor (13 HP) RM 480 E (net) €7,550.00 Petrol Engine (15 HP) RM 480 B (net) €7,385.71 Additional Options With the optional lift table or a chain conveyor, logs up to 6 meters in length can be processed effortlessly. Kdsdpfx Aju Dkufodweg Technical Details Weight (incl. trailer): 750 kg Shipping cost: €300 (transport in iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. split wood diameter: 48 cm Max. split wood length: approx. 60 cm Max. log length: 300 cm Motor: Electric, 13 HP Hydraulic oil: 46 Hydraulic connections and control levers are pre-installed, making the machine operational in no time. Take advantage of the powerful and well-engineered technology of the H&R RM 480 wood processor. Order today and make your firewood processing more efficient, safer, and more comfortable!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Kdodpfju Dnrusx Adweg Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: good (used), Year of construction: 1981, roll diameter 315 mm throat 295 mm workpiece height 190 mm Motor Capacity 0,37/0,8 kW table-size 470 x 450 mm saw band length 2220 mm cutting speeds 450 + 900 m/min weight of the machine ca. 110 kg Kdedsyatycepfx Adweg dimensions of the machine ca. 640 x 510 x 1600 mm

Condition: used, Year of construction: 2007, functionality: fully functional, Small panel saw Behringer LPS 60 T, year 2007, available from early 2026. Kdedpfxsx H Rule Adwog

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBM 540 A SC, BRAND NEW MACHINE! SC-Kit 26 kW Hinged belt conveyor Rinsing gun Floor tray Line laser Lighting Behringer new machines: Come-See-Buy Immediately available from stock Warranty from date of purchase Machine downtime? Replacement in the shortest possible time Delivery and installation available on request Kedpfx Adsyanaqjwodg Immediately available from stock

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 663 A Dynamic, BRAND NEW MACHINE! Cut Monitoring Saw Drive 11kW 50-2 Chip Conveyor 100 Bar Start Detection 535 Retraction Cylinder 550 Lighting 941 Dynamic In/Out Sawing 1005 Ksdpfx Adjyam Uyjwjdg Cutting Channel Extension 1006 Saw Blade Run-in Behringer New Machines: Come-See-Buy Immediately available from stock Warranty from date of purchase Machine breakdown? Replacement in the shortest time Delivery and installation available upon request Immediately deliverable from stock

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 511 A Dynamic, BRAND NEW MACHINE! Cut monitoring 22 Chip conveyor 100 Bar start detection 535 Retraction cylinder 550 Lighting Behringer New Machines: Come-See-Buy Available immediately from stock Kdsdpeyam Ugefx Adweg Warranty from date of purchase Machine breakdown? Replacement in the shortest possible time Delivery and installation on request Immediately available from stock

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 411 A Dynamic, BRAND NEW MACHINE! manual positioning 18 cut monitoring 22 Kjdpsyam Tpefx Adwodg saw drive 5.2 kW 50-2 chip conveyor 100 5 Micro 250 bundle clamping device 440 bar start detection 535 retraction cylinder 550 clamping pressure regulation 832 line laser 940 lighting 941 cutting channel extension Behringer New Machines: Come-See-Buy Available immediately from stock Warranty from date of purchase Machine downtime? Fast exchange available Delivery and installation on request Available immediately from stock

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 411 A Dynamic, BRAND NEW MACHINE! Cut monitoring 22 Kdedoyam Srjpfx Adwjg AFC-Pro 33 Saw drive 5.2kW 50-2 Chip conveyor 100 Bar start detection 535 Lighting Behringer new machines: Come-See-Buy Immediately available from stock Warranty from date of purchase Machine breakdown? Replacement in the shortest possible time Delivery and setup available on request Immediately available from stock

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 261 A Dynamic, NEW MACHINE! Screw conveyor 105 Bar start detection 535 Lighting Behringer new machines: Come-See-Buy Immediately available from stock Warranty from date of purchase Machine breakdown? Replacement in the shortest possible time Delivery and installation available upon request Immediately available from stock Kdodpfxsyam Rze Adwjg

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 261 A Dynamic, BRAND NEW MACHINE! Manual positioning 18 Saw drive 5.2 kW 50-2 Screw conveyor 105 Bar start detection 535 Lighting Behringer new machines: Come – See – Buy Ksdpfeyam Rhjx Adwsdg Immediately available from stock Warranty from date of purchase Machine downtime? Rapid replacement Delivery and installation available upon request Available immediately from stock

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Kedpjwka Ntsfx Adwsdg Location: Flörsheim Availability: short-term

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Kdsdpfjft U Sasx Adwsg Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: refurbished (used), functionality: fully functional, rotor diameter: 400 mm, rotor length: 1,000 mm, power: 37 kW (50.31 HP), rotational speed (max.): 100 rpm, working width: 1,000 mm, Single shaft shredder OVERHAULD Rotor diameter: 400mm Working width: 1000mm Kdjdpsvnl Ukefx Adweg Drive: 37kW Hydraulics: 1.5kW Rotor blades: 48 pieces Stator blades: 4 pieces - Adjustable

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Kodpfxod Sblme Adwsdg Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Working width: 1000mm

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down - Blade guard - Spindle lock Kodpfx Aex S Ndvedwodg - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: excellent (used), CATALOG NO. 7532 TECHNICAL DATA - Track width: 340mm - Shaft width: 400mm - Shaft diameter: 65mm - Max. saw blade diameter: 400mm - Saw blade bore diameter: 80mm - Max. cutting height (with 400mm blade): 140mm - Table width with clearance: 870mm - Table length: 2140mm From the top: - Pawls - 1 pressure idler roller - Pawls - Sliding pressure roller - Saw shaft - Sliding pressure roller - Sliding pressure shaft From the bottom: - Guide rail - Idler roller - Pawls - Track - Electric body lifting: 0.55kW - Electric saw shaft lifting: approx. 0.55kW - Central lubrication - Stepless feed speed adjustment via frequency inverter (1.5kW): 8-48m/min - Main motor: 55kW - Extraction nozzle diameter: 300mm - Overall dimensions (L/W/H): 2540x1480x2570mm - Weight approx.: 3500kg Kjdpfx Adjx S I Utowodg ADVANTAGES – Manufactured in Germany – Fitted with 5 pcs 350mm diameter saw blades – Electric height adjustment – Operator control panel – Stepless feed speed adjustment – Used multi-rip saw, in very good condition Net price: 145,900 PLN Net price: 34,730 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: new, CATALOG NUMBER RE036 2 axes – electrically controlled lifting and tilting of the main saw blade with electronic height and angle readout, control panel integrated into the machine body – Brand new machine, in stock – Documentation: DTR + CE – Cutting width at the rip fence: 1300 mm – Main motor power: 6 kW TECHNICAL SPECIFICATIONS - Saw blade tilting range: 0–46˚ - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Main spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Max scoring blade diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring unit speed: 8500 rpm Kodpsx S I Srefx Adwedg - Scoring spindle diameter: 20 mm - Cutting width at rip fence (standard 1050 mm): 1300 mm - Cutting width using stops on auxiliary table: 215–3200 mm - Cutting height for 300 mm blade at 90°/45°: 90/60 mm - Cutting height for 350 mm blade at 90°/45°: 5–115 / 3.5–80 mm - Cutting height for 400 mm blade at 90°/45°: 25–140 / 15.5–95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle guide with aluminum rail – Additional support table – Additional start/stop button on sliding table – Electronic digital cutting width readout on longitudinal fence – Electronic digital cutting width readout on auxiliary table Net price: 49,900 PLN Net price: 11,880 EUR (depending on the exchange rate, here calculated at 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Kjdpfx Asx S I Rhsdwjdg Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm Kedpfx Adjx S Ix Ejwodg - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: Kdodpfsx S It Ajx Adwjg - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)