Used Scm Multiflex for sale (649)

Condition: excellent (used), functionality: fully functional, 29 spindles left/right spindles Iijdpfx Aozz N S Ajhnog spindles span 32mm horizontal or vertical drilling setting of depth of drilling pneumtatic movement of drilling head

Condition: good (used), For sale is a used SCM panel saw with a cutting length of 3000 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3000 mm - Cutting width 600 mm Iiodpfxjza Dqfo Ahnjg - Cutting height 135 mm - Max. saw blade diameter 400 mm - Dust extraction connection 120 mm - Motor power 5.5 kW / 7.5 hp The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw Reference: R-A0074

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding Iijdey I Srzopfx Ahnjg MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: excellent (used), SCM Casadei C 41 C Universal Combined Woodworking Machine with FT 200 Dust Extractor For sale is an SCM Casadei C 41 C universal combined woodworking machine, manufactured in 2016. The machine was purchased new from Hudek Zagreb d.o.o. and has been used in production. It is fully operational and can be inspected and tested by prior arrangement at its current location in Antunovac, Croatia. The machine combines several woodworking operations in a single compact unit: Surface planing Thickness planing Sawing Spindle moulding Drilling and mortising Scoring Sliding-table operation Machine identification: Manufacturer: SCM Industria S.p.A. Make: SCM Casadei Ijdpeznbyxjfx Ahnsig Model: C 41 C Type: C 41 Designation: Universal combined woodworking machine Year of manufacture: 2016 CE-certified version Country of manufacture: San Marino Machine weight: 628 kg Planer and thicknesser: Working width: 410 mm Surface planer table length: 1,800 mm Thicknessing capacity: 3.5–230 mm Thicknesser feed speed: 7 m/min Circular saw: Tilting saw unit: 90–45° Maximum saw-blade diameter: 315 mm Maximum cutting height: 100 mm Maximum rip-cut width on the right: 900 mm Scoring unit Sliding table Sliding table: Sliding-table length: 2,310 mm Spindle moulder: Spindle speeds: 3,500 / 7,500 / 10,000 rpm Spindle diameter: 30 mm Usable spindle height: 120 mm Drilling and mortising unit: Table travel: X 160 / Y 105 / Z 115 mm Wescott drill chuck: 0–16 mm Electrical and safety equipment: Three motors: 3 × 5.0 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current shown on the machine nameplate: 10 A Motor brakes Emergency-stop button CE version Included equipment: An FT 200 dust extractor, rated at 1.1 kW, including a flexible extraction hose, is included with the machine. Condition and availability: Condition: used and operational Previously used in production Availability: immediately Inspection and test run possible by prior arrangement Location: Antunovac, near Osijek, Croatia Price: €7,500 plus VAT The price is negotiable for a serious buyer following an inspection of the machine.

Condition: used, Year of construction: 2003, functionality: fully functional, GABBIANI MACCHINE AXIOMA 125 - FULLY FUNCTIONAL - GA1/002132 YEAR 2003 Iiodpjwzbf Refx Ahnog MAX. SAW BLADE DIAMETER: 420 mm MIN. DIAMETER: 300 mm, BORE: 80 mm SPEED: 3500 SCORING BLADE DIAMETER: 200 mm BORE: 80 mm SPEED: 430

Condition: excellent (used), Catalogue number 7987 TECHNICAL DATA - Roller width: 500 mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230 mm – From above: - Anti-kickback fingers - Toothed, feed-in roller; pulling, swiveling - Pressure bar - Planing shaft - Pressure bar - Smooth, feed-out roller; pulling - Motor: 4 kW - Electrically adjustable table height - 2 feed speeds: 8/12.5 m/min - Dimensions (L/W/H): 1000x1000x1050 mm - Weight: 620 kg ADVANTAGES – Made in Italy Iijdpfx Aezu Savshnog – Used thickness planer, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length: 4300 mm Cutting depth: 4300 mm 7.5 kW main blade unit Scoring blade unit 1 fixed front table with air cushion 3 mobile front tables with air cushion Pushing carriage with approx. 7 clamps WinCut software Iijdpfsznz Uiex Ahnog Foot pedal for cycle start and stop Safety guards Weight approx. 3277 kg. Available starting September 2026.

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences • Security carpets • CE rules • Year 2007 ROUTER UNIT 8,5 kW / 11,5 HP 0 to 24.000 rpm Automatic Tool Change System Isdpozg H Sdjfx Ahnsig HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm 3.500 to 7.500 rpm

Condition: used, functionality: fully functional, SCM Sandya 5 wide belt sander Iiedpfezx Afqjx Ahnsg Working width: 1100 mm Sanding height: 4 – 170 mm 1 metal sanding unit 2 combi sanding units Electric height adjustment Optical oscillation

Condition: excellent (used), Year of construction: 2003, Edge banding machine SCM Iedpfszynngsx Ahnjig Type: Contour

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Iijdsxy Tmnspfx Ahnog

Condition: used, Technical data: Working width: 910 mm Iiedpfxjzu An Rs Ahnjg 1 sanding unit Roller diameter: 300 mm Workpiece height: 160 mm Extraction port diameter: 160 mm Electric height adjustment Analog height indicator Main motor power: 9 kW Voltage: 380 V Overall dimensions: Length: 1800 mm Width: 1500 mm Height: 2150 mm

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical data: - max width of workpiece 900mm - max height of workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - rubber roller, slip roller I unit - 2x rubber roller, slip roller II unit - slip roller, rubber roller, smooth – from below: - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - working pressure 6-8 bar - diameter of dust extraction nozzle 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Ijdpjzx Rzyefx Ahnsig Advantages: – Italian production, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6890 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. Iodpfx Ajzuzfhehnjig - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Iedjzlw Rnopfx Ahneig Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Isdozulxfopfx Ahnjig Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015315, functionality: fully functional, planing width: 240 mm, number of spindles: 8, working height: 140 mm, TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 140 mm Infeed table length: 2,500 mm Feed drive: Cardan drive Lubrication system: Automatic Diameter of planing shaft: 40 mm Spindles Number of spindles: 8 pcs. Spindle 1 Spindle type: Bottom Tool available: Yes Spindle 2 Spindle type: Right Tool available: Yes Spindle 3 Spindle type: Left Motor power: 15 kW Tool available: Yes Spindle 4 Spindle type: Right Motor power: 11 kW Tool available: Yes Spindle 5 Spindle type: Left Motor power: 11 kW Tool available: Yes Spindle 6 Spindle type: Top Motor power: 15 kW Tool available: Yes Iodpfx Ahozxcfdonoig Spindle 7 Spindle type: Top Motor power: 11 kW Tool available: Yes Spindle 8 Spindle type: Bottom Motor power: 11 kW Tool available: Yes Feed system Manufacturer: H&M Max. infeed length: 250 mm Discharge system Manufacturer: H&M Max. discharge length: 760 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 20,000 x 2,400 x 2,200 mm Unladen weight: 6,000 kg Number of transport packages: 8 pcs. EQUIPMENT Tools for all 8 spindles Automatic lubrication system Electrical wiring diagrams Technical data Documentation CE marking

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer by SCM GROUP. The simple and robust design ensures long-term durability and high performance. The rigid steel machine base guarantees machining accuracy and quality. The machine is intended for larger operations specializing in the production of shaped and straight profiles. Features: - 5 working spindles: bottom, right, left, top, bottom - Automatic central lubrication of the working table - Material feed speed variator - Inspected machine with half-year warranty - Excellent technical condition - Equipped with tooling Technical data: - Working width (finished profile thickness) min/max: 25 / 230 mm - Working height (finished profile thickness) min/max: 6 / 120 mm - Table length: 2000 mm - 1st spindle (bottom): approx. 5 kW - Right and left spindle: approx. 7 kW - 4th spindle (top): approx. 7 kW - 5th spindle (bottom): approx. 5 kW Ijdpfxevxtzae Ahnjig - Tool speed: 6000 rpm - Stepless feed speed: 4 - 24 m/min - Feed motor: 4 kW - Weight: approx. 3000 kg

Year of construction: 2009, condition: ready for operation (used), SCM surface planer offered. Working width: 520mm, cutter block diameter: 120mm, knife dimensions X/Y/Z: 520mm/35mm/3mm, max. speed: 5000rpm, max. depth of cut: 8mm, total jointer table length: 2750mm, infeed table length: approx. 1550mm, dust extraction port diameter: 120mm, machine dimensions X/Y/Z: approx. 2750mm/1415mm/1200mm, weight: 875kg. Inspection by appointment possible. Ijdpfjzl Enusx Ahnsig

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Iiodpfx Ahjyapi Heneg Type: Moulder and Planer If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 118 mm, cutting width (max.): 1,270 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,550 mm, total width: 2,200 mm, total height: 1,600 mm, overall weight: 630 kg, Equipment: CE marking, documentation/manual, saw blade guard, – Italian manufacture – Year of production: 2006 – Operating manual and CE certificate TECHNICAL SPECIFICATIONS: – Carriage length: 3200 mm – Cutting width on the right side: 1270 mm – Blade diameter: min. 250 mm, max. 350 mm – Scorer blade diameter: 120 mm – Main motor: 5.5 kW – Scorer motor: 0.55 kW – Brake – Main blade spindle diameter: 30 mm – Scorer spindle diameter: 20 mm – Cutting height adjustment – Cutting angle adjustment: 0° - 45° – Max. cutting height at 90° (350 mm blade): ~118 mm – Max. cutting height at 45° (350 mm blade): ~84 mm Iisdpfx Aoy Ax Nishneg – Two ratchets – Moving guard – Carriage dimensions (length/width): 3200 x 315 mm – Extraction port diameter: 80 and 120 mm – Overall dimensions (L/W/H): 355 / 220 / 170 cm – Weight: ~630 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area X: 3280 mm Working area Y: 1250 mm Electrospindle Drilling heads for vertical drilling: 12 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Iisdpfxozwgkbe Ahnsg Blade for grooving in the X direction 8-position turret tool changer 10-position linear tool changer on the right side 1 additional milling motor with 2 outputs Work table with 6 stops Programming software: Xilog Plus Control panel 1 vacuum pump with a capacity of 90 m3/h Safety guards Approximate weight: 2500 Kg Available starting November 2026

Condition: excellent (used), working width 1100 mm calibrating unit with metal roller calibrating unit with rubber roller Iiedpfx Ahozyafwsnjg combination unit with rubber roller and pad activation of machine functions from the control panel pneumatic oscillation pneumatic belt tensioning motor power: 9KW and 9KW, total power 18.5 KW two feed speeds for the conveyor material thickness gauge two feed speeds for sanding belts emergency stop switch

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working area X: 3600 mm Working area Y: 2200 mm 4-axis electrospindle, HSK 36F shank Vertical drilling bits: 12 Horizontal drilling bits X: 4 Iiedpjzwc Nmsfx Ahnsg Horizontal drilling bits Y: 2 Blade for grooving in the X direction Linear tool changer with 20 positions Nesting table Software: Xilog Plus and Maestro CNC Control panel 2 vacuum pumps, 250 m3/h each Approximate weight: 5000 Kg Includes 1 unit with 2 outlets, and 6 suction cups Available: January 2027

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,330 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, overall weight: 670 kg, Equipment: CE marking, saw blade guard, – Italian production – year of manufacture: 2012 TECHNICAL SPECIFICATIONS: – carriage length: 3200 mm – cutting width on the right: 1330 mm – saw blade diameter: min. 250 mm, max. 315 mm Ijdeyxph Uepfx Ahnjig – scorer blade diameter: 120 mm – main motor: 5.5 kW – scorer motor: 0.75 kW – brake – main saw spindle diameter: 30 mm – scorer spindle diameter: 20 mm – cutting height adjustment – cutting angle adjustment: 0° - 45° – max. cutting height: 100 mm – two latches – movable guard – extraction nozzle diameter: 80 and 120 mm – dimensions (L/W/H): 340 / 220 / 170 cm – weight: ~ 670 kg