Used Scrapers for sale (723)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,714 h, This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information. Additional equipment • Jointing cutter • Radiant heater • EVA gluing unit • Roll magazine for edge material • Cutting unit Podpsyaqbwsfx Aa Dogg • Flush milling top/bottom • MFA with 2 motors for radius r2, servo-controlled • Profile scraper unit • Surface scraper unit • Buffing unit Machine Benefits Technical Machine Benefits • Feed speed: 20 m/min Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2001, This HOMAG Optimat KL 78/A20/S2/Z was manufactured in 2001. A robust single-sided edge bander, it features a comprehensive setup including joint milling, a glue premelter, pressure zone, snipping, and flush trimming units. It also boasts advanced contour and groove trimming, profile and surface scrapers, and a buffing unit, all controlled by the Homatic NC 21 unit. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Single-sided edge banding machine with workpiece return • Joint milling • Gluing section with glue premelter • Pressure zone Pedpfxeyap Tlo Aa Djgg • Snipping unit • Flush trimming • Contour trimming unit fk 13 with automatic tool changer 8-fold • Groove trimming unit • Profile scraper // surface scraper • Buffing unit Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, heating capacity: 1,600 kW (2,175.39 HP), Equipment: documentation/manual, hot water, Polzenith Heating Boiler 1.6 MW, year of manufacture 2007 Very well-maintained combustion system by Polzenith with a heating capacity of 1.6 MW. Complete system including: - Fuel storage. Steel construction with walking floor - Scraper conveyor - Beth electrostatic precipitator with electrical cabinet - Chimney approx. 12 m high - All flue gas lines Pedpfxew Nrr Nj Aa Degg - Complete with control panel and hydraulic unit System has been professionally dismantled and is immediately ready for loading.

Condition: used, Year of construction: 2011, functionality: fully functional, Automatic Screen Printing Machine The INO Print SA2 is a modernly engineered screen printing machine designed for printing on various materials placed on a vacuum table. Easy operation, quick job changeover, and fine adjustment of all printing-relevant parameters are among its many advantages. Advantages and Benefits of the INO Print SA2: • User-friendly operation with minimal setup time • High printing accuracy • Optical registration on previous prints – combination with digital technologies possible • Automatic take-off device boosts productivity by up to 30%, improves print quality, and relieves the operator, who only needs to load the print material • Take-off can be performed from any position on the vacuum table • Suitable for printing on materials such as paper, foils, cardboard, etc. • Ergonomic design minimizes operator effort • Pull-out drawer for easy material loading • Screen remains in a horizontal position, preventing ink from dripping behind the squeegee • Ink can be refilled conveniently from a seated position Pgjdpex Nv Nmofx Aa Dog • Pneumatic squeegee and scraper holding system • Servo drive reduces costly compressed air consumption • Maximum print object height: 400 mm Technical Data: Maximum print format: 700 x 500 mm Maximum screen size: 1100 x 900 mm Material thickness: up to 400 mm (with manual offloading) Axial adjustment: X and Y ±10 mm, Z 100 mm Screen lift during loading: adjustable up to 450 mm Air connection: 6 bar

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 01/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 590 mm, total length: 680 mm, total height: 1,390 mm, WP 300 Croissant Rolling Machine Feed rollers with scraper suitable for all types of sticks such as Kornspitz and pretzel sticks, mobile croissant rolling machine Connection: 400V, 16A CEE plug Dimensions approx.: 590 x 680 x 1390 mm (W x L x H) Used machine Options: Pgedpfx Asyaf Ewoa Djg Maintenance contract Feeding device Spare parts box Service package Delivery service Training & commissioning Many more bakery machines in stock!

Condition: used, Year of construction: 2020, operating hours: 1,535 h, CE mark: yes Pgjdpfx Aaoya Ufae Djg Serial number: 20-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22197 Specifications: 2020 model 3565 kg 1535 hours Kubota engine Recently serviced Scraper blade recently replaced Extra lights Articulated steering Ready for delivery Description: We have a 2020 HAMM HD12VV roller for sale. The roller has been recently serviced, and the scraper blade has been replaced. Everything works as it should according to the owner. Ready for delivery. Hours: 1535 Own weight: 3565 CE: Yes Engine hours: 1535 Model: HD12 VV vals

Condition: good (used), Year of construction: 2000, GRUNWALD HITTPAC AKH-019R/! Item: GRUNWALD Hittpac AKH-019R/1 Grunwald-Cup Filling Machine various, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2000 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine, and operator panel. Machine has polycarbonate glass safety guards. Podpfsp R R Dwsx Aa Dogg CEE machine, incl. documentation Stationed: Denmark

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Psdsx U Sfnspfx Aa Djgg Subject to prior sale

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device Psdpfx Aasyailzo Degg • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Year of construction: 2004, condition: good (used), functionality: fully functional, B&Z Root End Reducer Type WRP SO Well-maintained, fully functional root end/log thickness reducer made by Baljer and Zembrod. Built in 2004. Complete with control system, scraper conveyor (straight and ascending). Includes log ejector. Complete steel substructure. Milling shaft length 1,380 mm. Milling shaft drive with 75 kW motor. Feed motor for slewing gear. Psdpfswavymjx Aa Dsgg

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Psdpjx Twdtjfx Aa Dsgg

Condition: new, Year of construction: 2025, - FANUC 0i-MF Plus "NEW" - 10.4" LCD color screen - Diagonal, MANUAL GUIDE i Machine Table - Table size: 1,120 x 560 mm - Load capacity: 1,000 kg - T-slot width: 18 mm - Number of T-slots: 5 - T-slot spacing: 100 mm - Table height from floor: 900 mm Travel paths and distances - X / Y / Z travel paths: 1,050 / 560 / 560 mm - Spindle nose to table surface: 150 - 710 mm - Spindle center to column: 600 mm Linear axis guides & speeds - Flat guides in X / Y / Z axes - Rapid traverse X/Y/Z: 36/36/34 m/min - Milling feed: 1 – 10,000 mm/min - Minimum increment: 0.001 mm Tool magazine (CAM type) / tool changer - Tool holder: BBT-50 (optional SK-50) - Number of magazine positions: 24 - System: random - Max. tool diameter: Ø 105 mm - Max. tool diameter with free adjacent positions: Ø200 mm - Max. tool length: 300 mm - Max. tool weight: 15 kg Pgsdpfswkf Izex Aa Dog Spindle - Spindle taper: BTT-50 BIG-PLUS® (optional SK-50) - Drive type: 2-stage gearbox - Speed level 1: 80 - 1,500 rpm - Speed level 2: 1,500 - 8,000 rpm - Drive power (30 min/continuous): 11 / 7.5 kW - Torque (30 min/continuous): 236/161 Nm up to 369 rpm - Lubrication: Grease - Inner bearing diameter: Ø80 mm - Spindle cooling: Oil Coolant, chip, and compressed air management - Coolant system including 400-liter tank and pumps - External coolant around the spindle - Internal cooling 50 bar - Bed flushing, 0.85 kW / 130 l/min., (optional) - Chip spirals on the right and left side of the machine bed Chips are conveyed to the front of the machine - Chip spiral (optional: belt or scraper belt chip conveyor) Chips are conveyed to the left side of the machine - Compressed air nozzle on the spindle (M32/M33) - Compressed air through the spindle (M38/M39), (Optional) - Compressed air and coolant gun Other Equipment - Pivoting control panel - Electronic handwheel (wired) - Central oil/air lubrication system - Spindle oil cooler - Fully enclosed housing - Work light - Heat exchanger on the control cabinet - Auto-Power OFF function - Hand tool set - Signal light - Transformer 400 VAC, 50 Hz - CE Declaration of Conformity

Condition: used, Year of construction: 1993, 2 pallet changers and 4th axis Year of manufacture: 1993 X-travel: 1,020 mm Y-travel: 560 mm Z-travel: 400 mm Table-to-spindle distance: 550 mm Control: Yasnac M80 Table size: 1,200 x 660 mm 2 pallets: 1 pallet with 2 Chick clamps – 1 pallet with 4th axis Tsudakoma RNCV201 Table load: 600 kg Tool holder: SK 40 Rapid traverse X-Y axes: 25,000 mm/min Rapid traverse Z: 15,000 mm/min Spindle speed: 200–20,000 rpm Motor power: 11/15 kW Tool magazine: 40 Internal coolant supply: 20 bar Coolant tank Timer Scraper conveyor Renishaw probe Spindle cooler Air cooler Electronic handwheel Machine weight: 9 t Required space: approx. 7 m x 4.5 m x 2.85 m Pgedpfxowxbg As Aa Dsg Total power requirement: 40 kVA

Condition: used, functionality: fully functional, We are offering for sale a Robot Coupe Blixer 23 A, 23 L, as pictured, complete with necessary tools and in excellent condition. This machine combines two functions in one: The Blixer unites the features of two well-known machines—a cutter and an emulsifier-mixer. It enables the processing of all kinds of raw and cooked foods into liquid, semi-liquid, or pureed end products. Efficient: Thanks to its large liquid capacity and a lid with scraper and sealing ring, this appliance allows for the preparation of a wide variety of blended foods, including enteral nutrition. Reliable: Blade with patented, innovative cutting profile for optimum cutting quality. Consistent cuts and fully uniform processing, even with the smallest quantities. With its high portion capacity (20–75), the Blixer 23 is ideally suited for use in hospitals, nursing homes, childcare centers, and, of course, restaurants. Maximum processing quantities: 4–15 kg. The control panel is equipped with a digital timer adjustable from 0 to 15 minutes and features a removable 23-liter tilting stainless steel bowl. An extra-low stainless steel blade with two removable, height-adjustable serrated blades is included. The unit has undergone a comprehensive inspection in our workshop and is fully operational. You will receive an invoice with VAT shown separately. Control panel: • Timer, adjustable from 0 to 15 minutes. The previously set processing time repeats automatically after the machine is stopped. • Flush stainless steel buttons for easy cleaning and long service life. • Indicator lights for maximum safety. • Pulse function for even higher cutting precision. Pgjdpfxsx Uw R No Aa Dog Lid: • Transparent polycarbonate lid for continuous monitoring during processing. • Absolutely tight-fitting lid that closes with a simple hand movement. • Swing mechanism on the lid ensures that no liquids reach the motor block. • Central opening in the lid for adding liquids or ingredients during processing. • Lid and sealing ring are easily removable for thorough cleaning. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to replacement of defective parts (does not include labor costs for removal and installation). • High-quality branded machines at fair prices. • Professional refurbishment/inspection & expert cleaning. • Tested & fully functional—or your money back. • Flexible shipping or local pickup options. • Competent advice—before and after purchase. • Provision of user manuals, wiring diagrams & spare parts. • DGUV V3-tested. Technical data: • Two speeds: 4400/5400 Watts • Speeds: 1,500 and 3,000 rpm • 400 V/50 Hz, three-phase • A: 8.5/10.5 W: 4,500 • Serial number: N6140112811 • Weight: 140.7 kg Condition: used, fully inspected, fully operational Specifications and errors subject to change. If you have any questions, require advice, or would like to view something on-site, please feel free to contact us during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,000 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, overall weight: 3,600 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 2,200 W, number of axes: 3, This 3-axis CHIRON FZ 08K W vertical machining center was manufactured in 2004. It features a Siemens 840D control, a rapid traverse speed of up to 60 m/min, and a high-pressure coolant system up to 150 bar. With approximately 5,000 machine hours and a robust tool changer with 24 positions, consider the opportunity to buy this CHIRON FZ 08K W vertical machining center. Contact us for more information about this machine. Additional equipment • Options: Optionally expandable to 4th and 5th axis (e.g. rotary table or swivel axis) Machine Benefits Technical Machine Benefits • High-pressure coolant unit: up to 150 bar (programmable) • Chip conveyor: scraper belt with 110-liter container • Filtration: 60-µm double-switching filter • Main drive: digital, air-locked • Max. Torque: 23 nm • Acceleration: x/y 0. 7 g, z 1. 0 g • Tool changer type: pick-up chain magazine (fully encapsulated) • Tool change time: 0. 8 s (control-dependent) • Chip-to-chip time: approx. 2. 2 s Extra Information The machine was acquired as a retrofit Mains connection: 400/230 V three-phase current, 50 Hz, N/PE Compressed air: min. 6 bar (±1 bar) Ambient temperature: max. 40°C Splash protection: Fully encapsulated with stainless steel blades Safety: CE-compliant (no RCD required) Workpiece Workpiece changing device: 0/180° with sheet steel partition Clamping surface: 2 x 550 x 300 mm² Max. Transport load: 200 kg per side (max. 50 kg difference) Workpiece changing time: Approx. 2.0 s (depending on weight) Media High-pressure coolant unit: Up to 150 bar (programmable) Chip conveyor: Scraper belt with 110-liter container Pgodpfx Aaeyaafrj Djg Filtration: 60-µm double-switching filter

Condition: ready for operation (used), Year of construction: 2012, This IMA Novimat Concept / I / G80 / 440 / R3 edgebander was manufactured in 2012. It features a robust automatic edge banding and post-processing system, including a workpiece returning system for enhanced productivity. Capable of handling edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-lock system and electronic temperature control for precise glue application. Consider the opportunity to buy this IMA Novimat Concept / I / G80 / 440 / R3 edgebander. Contact us for more information. Additional equipment • Joint Milling Unit: 2 motors, each 4.0 kW, 8800 RPM • Heater: Preheats workpiece edges up to 60 mm • Glue Application: Handles edges up to 3 mm • End Trimming Unit: 2 motors, 660 kW Pgjdpjx U U D Tsfx Aa Deg • Additional Units: Milling, Multi-Profile Milling, Contour Milling, Multi-Profile Scraper, and Scraper Units; Buffing Unit • Automatic Quickmelt hot glue feeder • Board Return System with powered roller conveyors, cross conveyor, transport belt, angle transfer, air-cushion tables, and safety fence Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm / minimum workpiece width: 65 mm / minimum workpiece thickness: 8 mm / maximum workpiece thickness: 60 mm / smallest workpiece: 150 mm x 150 mm or 65 mm x 300 mm Extra Information This machine is configured for efficient edge banding and post-processing with a robust set of features and support for various workpiece sizes. It is immediately available for production use.

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Pjdpfxex U U Dtj Aa Dogg Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Podpfxex Hhcts Aa Dsgg Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: reconditioned (used), Year of construction: 2016, CNC Vertical Machining Center HERMLE C 400 U With Heidenhain TNC 640 CNC Control Year of manufacture: 09/2016 Travel distances: X 850 Y 700 Z 500 mm Spindle speed range: 20 – 18,000 rpm, stepless Including the following accessories: - NC rotary swivel table Ø 650 mm x 540 mm (T-slots for SRT) - Vertical tool changer with 38 magazine slots (HSK 63) - Additional magazine with 50 magazine positions (ZM 50) - Through-spindle coolant supply 40 bar with paper band filter - Scale air purging - Fine filter for through-spindle coolant supply 40 bar Pjdsw Ewmfopfx Aa Degg - Scraper belt conveyor - Chip cart 450 liters - Coolant unit - Air blow-off unit - Spindle center compressed air - Manual cabin door, manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation - Electronic handwheel - BLUM tool breakage/control & measurement A2 - Heidenhain 3D touch probe - Chip rinsing pistol - Oil mist extraction unit - Control cabinet cooling device (RITTAL) - 4 adjustable machine feet - Operating manuals

Condition: used, Year of construction: 2016, operating hours: 2,500 h, Single-sided edge banding machine for processing straight workpiece edges and for applying and further processing various edge materials in longitudinal and cross feed. OVERVIEW OF THE AGGREGATE CONFIGURATION: - Infeed fence extension by 300 mm with additional unit for laminate overhang - JOINTER UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feed – APPLICATION UNIT QA 65 N EVA - TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT TRIMMING BEVEL/STRAIGHT Pgodpfox S Nc Ejx Aa Djg - PNEUMATIC 2-POINT ADJUSTMENT TRIMMING - Multi-stage milling unit MS40 2 x 0.55 kW with opposed rotation and axis adjustment – with PNEUMATIC 2-POINT ADJUSTMENT of tracing rollers (flush and radius/bevel milling) - MULTIFUNCTION FORM MILLING UNIT 2 x 0.4 kW - MULTISTAGE SCRAPING UNIT MZ 40 - PNEUMATIC SCRAPER ADJUSTMENT - GLUE JOINT SCRAPER - BUFFING UNIT - SEPARATING AGENT SPRAY UNIT WORKPIECE - Glide agent spray unit - CLEANING AGENT SPRAY UNIT WORKPIECE - POWERTOUCH control system

Condition: excellent (used), Year of construction: 2010, Single-sided edge banding machine for processing straight workpiece edges as well as applying and post-processing various edge materials in both longitudinal and transverse feed directions. OVERVIEW OF THE EQUIPMENT CONFIGURATION: - POWER CONTROL PC 20+ electronic control - PU upper pressure rollers instead of rubber rollers - Workpiece gap optimization - Infeed fence extension by 300 mm with additional device for laminate overhang - JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feeding – Quickmelt application unit – Standard application unit interchangeable for PU glue - Pressure zone with motorized adjustment - END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING - PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – with PNEUMATIC 2-POINT ADJUSTMENT (flush and radius/chamfer milling) – Program control for side tracing rollers stepless and edge thickness – Multi-roller tracing - MULTIFUNCTION PROFILE MILLING UNIT 2 x 0.4 kW with exchange system and quick-change heads - PROFILE SCRAPER WITH QUICK-CHANGE HEADS - Special tracing for profile scraper - PNEUMATIC ADJUSTMENT SCRAPER - GLUE JOINT SCRAPER - POLISHING UNIT Pjdox S I Iyjpfx Aa Degg - RELEASE AGENT SPRAY UNIT WORKPIECE - CLEANING AGENT SPRAY UNIT WORKPIECE

Condition: good (used), Year of construction: 2020, functionality: fully functional, Heavy duty edgebander EDGETEQ S-380 (HOMAG) in rich configuration suitable for custom made and series production. Machine is equipped with MULTIRADIUS aggregates (ABS 1mm, 2mm + thin edge) with electronic adjustment from the control panel. Main technical parameters: - feeding speed: 8-18 m/min (max. 14 m/min during rounding) - panel thickness: 10-60 mm Equipment and configuration of the machine: - control panel (color LCD screen) - internal lightning of working area - automatic lubrication of the feeding chain - electronic top pressure adjustment Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter diam. 100 mm) - glue pot with roller (EVA/PUR glue) - pressure rollers (4 pcs) with timed intervention - 2 motor end cutting unit with pneumatic tilting of the blades - radius trimming unit - 2 motor rounding unit - radius edge scrapers Pgsdpfxeyc Ntqo Aa Djg - cleaning spray - glue scrapers - brushes Production year: 2020 Status of the machine: good Availability: cca from April 2026

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and Technical Data: - Base machine: Streamer 1057XL 200-400 V / 50 Hz, with manual pressure bridge adjustment - Extendable XL workpiece support: spacing 600 mm - Jointing milling unit: FG201 with 2 cutterheads for trimming panel edges Pgedpfx Aox Twh Eea Djg - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System - Edge feeding unit: 1903, automatic transport for roll and strip material - Glue application system: Glu Jet GJ301 2.3 kW / 50 Hz, automatic glue height adjustment (contact nozzle) - Automatic reloading function - Pressure unit: 1912-3, pneumatic, first roller driven, with pneumatic plunge control - End trimming unit: 1918, 60 mm, pneumatic, angular trimming 0-10 degrees, pneumatic adjustment - Extraction hoods: for end trimming unit 1918 - Multifunctional milling unit: FR 201, for flush, radius, and profile milling, including DIA cutters - Corner copying unit: 1832, 1 x 0.35 kW / 200 Hz / 12,000 rpm, corner copying for edge thickness up to 3 mm - Diamond cutter: Diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, CM technology (Leuco system), integrated chip extraction, for profile milling unit 1832 - Scraper unit: 1929 - Complete chip box: Diameter 120 mm, for 1929 + 1964 + FK70 - HW reversible knives: for scraper holder R = 2.0 mm, 2 pcs required - Surface scraper: FK 701 for removing excess glue for a clean glue joint - Spray device: TR 201 for infeed and outfeed areas - Buffing unit: 1940, 2 x 0.09 kW / 50-60 Hz / 1,400 rpm, for finishing and polishing edges, with 2 textile discs, tiltable 0-5 degrees - Minimum workpiece length: 160 mm - Workpiece thickness: 6-45 / 60 mm - Edge thickness: 0.4-3 / 6 mm - Feed speed: 10 m/min Length: 4,630 mm Weight: approx. 1,440 kg Availability: short notice Location: 65439 Flörsheim

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: MAKINO, controller model: Pro5, table load: 1,200 kg, tool weight: 20,000 g, number of axes: 4, This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information. Additional equipment • Spindle cooling • Tank system with Knoll compact band filter, 3200 liters Pjdpfxex D Ngxe Aa Dsgg • Coolant supply through the spindle • Oil mist extraction • Scraper belt conveyor • Conversion kit for stand-alone operation (currently used as a system machine) Machine Benefits Technical Machine Benefits • Transverse movement (x-axis) of the column: 900 mm • Height adjustment (y-axis) of the spindle unit: 800 mm • Longitudinal movement (z-axis) of the table: 1020 mm • Permissible swivel diameter in the working area: 1000 mm • Max. Swiveling height from pallet surface: 1300 mm • Pallet size: 630 x 630 mm • Pallet – nc – rotary table with 4th nc axis • Input resolution: 0. 001° • Positioning accuracy: ± 3 arcseconds • Tool magazine with 242 storage slots Extra Information Power Supply 400 V, 3-phase AC, 50 Hz Power rating: 72 kVA Control System Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection Adaptive feed control Compressed air through the spindle Knoll compact band filter, 3200 liters Magnetic separator Double-switching filter for IKZ Coolant supply through the spindle Compressed air through the spindle Oil mist extraction Scraper belt conveyor Control System: Makino Pro5 Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection (parallel to main operation) Adaptive feed control Conversion Kit for Stand-Alone Operation (Currently used as a system machine (FFS/FMS)) Pallet changer with placement of 2 pallets in alternating cycles onto a station positioned outside the working area Pallet holder rotatable, indexed at 90° intervals, 0-position electronically monitored Coding for automatic program call when inserting the pallet Pallet storage station secured with a protective device and electrical interlock

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: vec1206-L-1809RO1, input voltage: 400 V, total length: 7,000 mm, total width: 7,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2024, overall weight: 2,000 kg, input current: 11 A, mount diameter: 7,000 mm, loading space length: 7,000 mm, loading space width: 3,000 mm, loading space height: 2,000 mm, Laminated steel frame. safety bars for each print head and loading/unloading station. - Safety barrier to prevent operators from entering the stations during work -FOOT PEDAL (print order) -SERVOINDEXATOR-Precise pallet position control +/- .001". Ensures smooth indexing with superior print consistency -Increase production with precise control of acceleration and deceleration direction index: right and left -Programmed with Step-Back, Multi Step-Back and Cycle indexing options -Adjustment of the carousel stroke in both directions -15" TOUCHSCREEN with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View number of prints in real time, speed (pcs/hour) Save all parameters of a stored job: indexer speed, head speed of printing, printing area, number of strokes, time and temperature flash polymerization, color design Setting the preheating temperature of the pallets Quick setting at the same print speed and distance for all heads -Electrically operated PRINT HEADS-10 stations, 6 colors, 4 intermediate flashes, 12 pallets -VERY USEFUL for printing with water-based ink (automatic screen flooding system with ink after printing) - adjusting the screens (templates) with maximum precision in 3 points (front-back, left-right, rotational movement) -adjusting the distance between the pallet and the screen giving you the flexibility to print practically any ink on any substrate at the touch of a button - independent adjustment of the angle of the scraper and counter-scraper, with possible adjustments do with one hand Pgodpfxsvccqxo Aa Dsg - INTERMEDIATE FLASHS - RAPID WAVE QUARTZ QUARTZ FLASH 51cmX53cm (12 lamps) maximum coverage area Each of them is divided into 3 separate areas (front, middle, back) that can be used depending of the print size: area one, area two, area three, each two/all three CONFIGURED FOR THE POSSIBILITY OF INTERMEDIATE DRYING AFTER EACH PRINT: PRINT/FLASH/PRINT/PRINT/FLASH/PRINT/FLASH/PRINT/FLASH/PRINT/FLA SH/PRINT (POLYCROMY AC-powered printheads enhance finesse, speed and power Front and rear travel adjustment One-handed tool-free squeegee/flood bar lock for quick and easy charging and changing 15" touch screen with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View real-time number of prints (dozen) and speed (pcs/hour) Save all parameters of a stored job: non-contact, indexer speed, indexer speed, printhead speed, print area, number of strokes, flash curing time and temperature, color design, mode Set the pallet preheat temperature Quickly set the same print speed and distance for all heads Print heads AC electric print heads for a stronger and smoother stroke Press the button at the loading/unloading stations to prevent printing on empty pallets Adjustable side supports for low-profile screens for easy access True three-point micro-registration (front to back, left to right and roll motion)