Used Scrapers for sale (704)

Condition: used, Year of construction: 1969, Mixing: 1 planetary paddle, 1 bottom scraper, 1 side scraper Capicty : 200 Kg.   Vessel : Material : stainless steel Total volume: 389 L Capacity: 200 L Maximum pressure: 0.4 bar Tilting: yes Jacketed : Maximum pressure: 6 bar Electric heating + recirculation pump: 2 x 9 KW   Light for porthole Electrical cabinet   Machine dimensions: 140 x 195 x 240 cm Rsdpfx Aasygba Dsmjn Weight: Approximately 800 kg Videos available on request  

Condition: new, Year of construction: 2023, total length: 44,000 mm, total width: 1,000 mm, Empty weight: 37.000 kg Productivity: 1000 tph 1000x44400mm radial telescobic conveyor General Tech Spec of 150 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Redpfxsx D A S Uj Aamon Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Direction Roll 12 units Nominal Capacity 800-1000 tph Drive 2.5” Standard Kingpin Paint Acrylic Raised stockpile height 15 meters Lowered stockpile height 4,3 meters Belt widths: 1200mm(26 meters)-1000mm(22 meters) Stinger width 1000* 19000mm Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees15m height 140900 metric tons Drum 323mm dia, anti material sticking Main Belt 2x22 kw Motor Gearbox Stinger Belt Conveyor 2x22 kw Motor Gearbox Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 95 kw Transport Weight 35 tons Transport Dimensions 4400x29300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up With Polypole automatic piling software and Siemens PLS option Fast delivery, high,quality, economical

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Rjdpjvvkdtjfx Aamen

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Rodpfxovvkd Tj Aamen Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Rjdpfevvkfdsx Aamsn

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Rsdpfevvkfqjx Aamjn Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Redpfx Aoxyiilsamsn Storage location: Nattheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Rodpfxevvkg Is Aamsn Storage location: Nattheim

Condition: excellent (used), functionality: fully functional, pre-milling aggregate granulate glue station maximum working height 60 mm guillotine for trimming edge band from the roll precision edge band trimming unit milling aggregate for trimming edge band excess from the top and bottom of the panel Redpjydpp Iefx Aamjn profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2012 CE mark

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps Rjdpfxeydc A Ie Aamen - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Rsdpfxow Aig So Aamen

Condition: used, tank capacity: 1,540 l, GENERAL INFORMATION Equipment: Spray head Design: vertical Remarks: Homogenizer mounted on the bottom (see photos) is included in the scope of delivery Heating/cooling: available Insulation: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: propeller Agitators: 2 agitators Agitator type: anchor agitator Location: external storage Cylinder temperature control: double jacketed Nameplate: Volume: 1,540 liters Double jacket volume: 100.0 liters Product-contact material: V2A 1.4301 (AISI 304) Rjdpfxoycirge Aamon Condition: used Previous application: pharmaceutical TANK Max. permissible operating temperature: 200 °C Support style: height-adjustable legs Number of legs: 3 pieces INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: on the upper head AGITATOR Agitator mounting: on the tank Agitator equipment: Scrapers are mounted on the anchor agitator (see photos) AGITATOR 2 Agitator mounting: on the tank

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Rear discharge conveyor with magnet roll Hydr. self propelled drive (for moving on site) Twin drive separate drives for scraper floor and infeed roller Rodpfxet Egddj Aamen Radio remote control

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 22,000 kg, power: 375.1 kW (509.99 HP), year of last overhaul: 2024, Diesel engine: 510 HP Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor Overband magnet Central lubrication Rsdpfx Aerrg Ifsamsn Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control We can also offer financing if required.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control Rjdpfxow Rz Rqo Aamjn

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Fully functional , Can be tested , Redpfjxz Icgjx Aamjn

Condition: used, Mixing: 1 planetary paddle, 1 bottom scraper, 1 side scraper Possibility of integrating a lateral rotor/stator agitator (this request may be subject to an additional quotation). Side scraper and its support not available (this request may be subject to an additional quotation). Vessel : Material : stainless steel Total volume : 400 L Maximum pressure: 0.4 bar Tilting: yes Spray nozzle circuit Jacketed : Capacity : 30 L Maximum pressure: 6 bar Rsdpfsyfw Inex Aamen   Electrical cabinet Machine dimension : 140 x 165 x 240 cm Videos available on request

Condition: ready for operation (used), Year of construction: 2009, This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information. • Configuration/Features: • Joining milling • Gluing unit for EVA hot melt adhesive • Pressure zone • Cutting unit • Copy milling • Scrapers • Buffing unit Additional equipment Rjdeychduspfx Aamjn • Workpiece returning system: LIGMATECH

Condition: excellent (used), The line includes: - three stone removers - a roller grader - a pit scraper Redpfsycqbiox Aamjn - a screw conveyor for pits The machines have only worked for three seasons and are in very good condition. The price refers to all machines.

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 Rjdpfx Ajxxy Rkeamen 2 glue tanks + 1 glue tank for spare parts

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900 mm Infeed height: 300 mm Shaft width: 1030 mm Shaft diameter: 700 mm Knife length: 1030 mm Number of knives: 3 pcs Screen dimensions: 70x70 mm Below: 2 toothed feed shafts Lower shaft motor: 7.5 kW Above: 2 toothed feed shafts Upper shaft motor: 7.5 kW Belt conveyor feeder Redler chain conveyor 5600 mm + 10600 mm, 2.2 kW Feeder belt width: 800 mm Rjdpfxsx S Naws Aamon Main motor: 90 kW Reverse function Overall machine dimensions (L/W/H): 3300x3100x1700 mm Base for chipper dimensions: 3300x2080x1940 mm Feeder / Redler dimensions (L/W/H): 5600x900x1000 mm + 10600x1050x1600 mm Base for feeder belt dimensions: 5100x1300x2520 mm Total weight approx.: 16,000 kg ADVANTAGES – German-made – Redler-type chain conveyor equipped with scrapers – Reverse function – DTR technical documentation – Used chipper, in very good condition Net price: 258,900 PLN Net price: 61,640 EUR (according to exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: new, Catalogue No.: HZ014 – Pre-milling Redpfx Aex S Iypoamsn – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) Rsdpfsycg D Tsx Aamon • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: used, Year of construction: 2012, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm 430 mm 410 mm Redpfx Aaoyb S Emomon 700 x 410 mm 410 mm cutting speed 500 x 410 mm down speed 320 mm dimensions of saw-band 320 x 410 mm workpiece weight 15 - 150 m/min 5,5 kW work height max. 3200 kg connected load 4500 x 2800 x 2000 mm Equipment: - Automatic cutting pressure and feed rate monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Automatic saw frame height adjustment - Minimum speed and saw blade monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA gripper infeed system from 5-2300 mm per stroke with integrated roller conveyor roller conveyor *Special equipment: - Laser light for cutting line display/ scribing saws - Driven chip brush - Micro dosing system - Clamping pressure regulation - Material bundle clamping - Job menu - Material database - Zero stop - Scraper belt conveyor for optimum chip removal, 2000 mm length - Cutting process control

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Rjdpfxoyamcws Aamon Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging thickness max.: 13 mm Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term