Used Screw Pressing Machine for sale (93,422)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Laser power: 4 kW Kdodpfx Aajxgg Irsbou Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50300315, product height (max.): 15 mm, product width (max.): 305 mm, product length (max.): 210 mm, paper weight (min.): 50 g/m², paper weight (max.): 200 g/m², TECHNICAL DETAILS Insert Length: min. 100 mm – max. 210 mm Width: min. 150 mm – max. 305 mm Weight: min. 50 g/m² – max. 200 g/m² Product height: max. 15 mm Kodpfx Aasxdii Hsbjdu Envelope Length: min. 105 mm – max. 230 mm Width: min. 162 mm – max. 341 mm Flap width: min. 25 mm – max. 70 mm Speed: max. 15,000 envelopes/h MACHINE DETAILS Printed labels: 798,538 pcs Note: The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15135, grinding length: 800 mm, grinding width: 600 mm, grinding height: 500 mm, grinding wheel diameter: 400 mm, control type: NC control, TECHNICAL DETAILS Control: NC Ergomatic Grinding length: 800 mm Grinding width: 600 mm Grinding height: 500 mm Kdodpfx Aexl Sifsabou Grinding wheel diameter: 400 mm EQUIPMENT Electromagnetic chuck Coolant purification system

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12C2221, TECHNICAL DETAILS Width of the worktable: 3,380 mm Note: The digital nesting tableau is not included. Kdodpfsxlcgujx Aabeu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Kdjdpfoxlcz Esx Aabju Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 400 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel Paths Travel X: 550 mm Travel Y: 410 mm Travel Z: 460 mm Kdjdexmgz Espfx Aabsu Max. Spindle Speed: 15,000 rpm Workpiece Table Size Length: 860 mm Table Size Width: 400 mm Max. Workpiece Weight: 400 kg MACHINE DETAILS Control Model: Matsuura G-Tech 30i Motor Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 2,200 mm x 2,700 mm x 2,500 mm (L x W x H) Weight: 10,000 kg Interface: BT40 EQUIPMENT Probe 3 Clamps CE Marking

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15360599, spindle speed (max.): 2,800 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 383 mm, disc diameter: 300 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 350 mm Z-axis travel: 383 mm Maximum grinding area: 600 x 350 mm Standard magnetic table size: 600 x 350 mm Grinding wheel diameter: 300 mm Spindle speed: 2,800 rpm Kodpsxnwm Uefx Aabedu Clamping surface: 820 × 350 mm Maximum table load: 400 kg Table speed: 0.005–35 m/min Rapid traverse (cross and vertical movement): 4,000 mm/min MACHINE DETAILS Control system: Siemens Electrical Data Operating voltage: 400 V, 3-phase Mains frequency: 50 Hz Machine weight: 2,200 kg EQUIPMENT - Coolant system - Automatic grinding wheel dresser

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X: 2,900 mm Travel Y: 1,000 mm Travel Z: 700 mm Tool holder: SK40 MACHINE DETAILS Kdedpoxltfhefx Aabeu Control manufacturer: Heidenhain

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Ksdpfexn Rviox Aabodu Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 30 mm, travel distance X-axis: 3,000 mm, hole diameter: 35 mm, swivel angle A-axis (max.): 360 °, TECHNICAL DETAILS X-axis: 3,000 mm A-axis: 360 degrees Feed rate: 20 m/min Material thickness Z: 12 mm - 30 mm Maximum hole diameter: 35 mm Minimum hole diameter: 3 mm Maximum recess depth with saw blade: 10 mm Panel dimensions Minimum panel size X: 300 mm Minimum panel size Y: 120 mm Minimum panel size Z: 12 mm MACHINE DETAILS Motor power: 0.75 HP Operating voltage: 400 V Required extraction capacity: 2,300 m³/h Kdjdpfx Aajxnyk Aebsu EQUIPMENT 4-position drill chuck Saw blade

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,265 h, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Maximum Speed: 140 m/min Control: SINUMERIK 840D SL Laser Excitation: Diode Module Chiller Unit: Air/Water LASER DATA - TRUDISK 3001 Laser Power: 3,000 W Sheet Thickness, Mild Steel: 20 mm Sheet Thickness, Stainless Steel: 15 mm Sheet Thickness, Aluminum: 15 mm Sheet Thickness, Copper: 6 mm Sheet Thickness, Brass: 6 mm MACHINE DETAILS Length: 11,150 mm Width: 6,650 mm Height: 2,200 mm Base Machine Weight: 12,000 kg Laser Beam On Time: 13,265 h (03.02.2023) Laser On Time: 3,172 h (03.02.2023) EQUIPMENT - Semi-automatic pallet changer - Laser beam guidance via fiber optic cable - Linear motor technology - Integrated control cabinets - Slag boxes - Laser diode positioning - TruDisk driven by machine - PierceLine - FocusLine - NitroLine - Transport and positioning device - Automatic nozzle cleaning - Universal laser cutting head - Protective window monitoring - ControlLine - Lens protective glass - Internet teleservice - Programmable gas pressure - FastLine - Multi-sheet processing - Condition monitor - Micro-welding Kodpfoxl T Rwox Aabedu - Central Link - CE certifications - Compact dust collector - Extraction unit - Automatic pallet changer (with light barriers)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 37,970 h, laser power: 5,000 W, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 2,400 kg, TECHNICAL DETAILS Travel distances Travel distance X-axis: 6000 mm Travel distance Y-axis: 2000 mm Kedpfx Aaoxnqcisbodu Travel distance Z-axis: 115 mm Laser power: 5,000 W Maximum workpiece weight: 2,400 kg Maximum positioning speed Parallel/Simultaneous X-axis: 200 m/min Maximum positioning speed Parallel/Simultaneous Y-axis: 282 m/min MACHINE DETAILS Laser type: CO2 TLF 5000 Electrical connection: 105 kVA / 400 V (± 10%) / 50 Hz (± 1%) / 3 Phase / 160 A Gas consumption CO2: 1 l/h Gas consumption N2: 6 l/h Gas consumption He: 13 l/h Operating hours Laser hours: 37,970 h Power-on hours: 66,500 h EQUIPMENT Automatic pallet changer Longitudinal belt conveyor PlasmaLine-PMS (Plasma Monitoring System) SprintLine Blowing Gas flushing Piercing Marking ContourLine AutoLas Plus PierceLine Note: The LiftMaster is not included in the scope of delivery or sale.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 50, laser power: 12,000 W, sheet thickness steel (max.): 100 mm, total length: 1,25,000 mm, warranty duration: 60 months, GX(Pro) Double Exchange Platform Sheet Fiber Laser Cutting Machine. Working platform size: 3048mm*1524mm, 4064mm*2040mm, 6096mm*2540mm, 12500mm*2540mm; Laser source power: 3000 - 40000W Kdedpfx Aoruz Uueabou Optional function: automatic loading and unloading system

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: 2430607, grinding length: 4,500 mm, grinding width: 1,800 mm, grinding height: 1,500 mm, Elevate your manufacturing precision with this robust Waldrich Coburg slideway grinding machine, a benchmark in the industry for producing ultra-accurate guideways, bed plates, and large-scale components. Renowned for its portal-type construction and hydrodynamic guideways, this machine delivers exceptional surface flatness and tolerances down to microns, making it ideal for machine tool builders, aerospace, and heavy machinery sectors. Built to last, it combines German engineering excellence with low maintenance demands, ensuring consistent performance even under heavy workloads. Whether you're grinding linear rails, injection molding bases, or precision straight edges, this grinder stands out for its vibration-damping capabilities and thermal stability, thanks to the innovative double-V bedway system that minimizes expansion effects for flawless results. Grinding Length (Max) : 4,500 mm Grinding Width (Max) : 1,800 mm Kdedpsxl Aynjfx Aabeu Workpiece Height (Max) : 1,500 mm

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, working width: 450 mm, color: dark red, overall weight: 250 kg, total height: 1,500 mm, total length: 6,500 mm, total width: 1,400 mm, Nursery machine with Tray filling operations for faster use. Tray is filled with potting mixture or cocopeat or peat moss. The machine has a conveyor belt of four meters length. The speed is controlled with motors and has a control pannel. Sensors work to start and stop the potting media operation. Another sensor is at the end which ensures proper watering of the filled trays. A dribbling attachment is kept to make holes ready for the seed sowing. Dressing of the potting media before the dribbling operation can be managed with attachments already installed. Power consumption is very less. Kdedpfx Aaexk Tf Ejbeu

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need fior additional installation. Kdsdehv U Txspfx Aabeu Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation - TASC laser control - Laser power control - Laser logbook - LensLine with status monitoring - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine - AdjustLine Kdodpfx Ajxl T Rdeabou - Internet remote services - FlyLine - Simple workshop programming

Condition: good (used), Year of construction: 2004, DGT Plus control system (Siemens basis) Kodpfxovg Sifo Aabsdu Sanding length 2400 mm Sanding width 1290 mm Sanding height 700 mm Magnetic table 2000 x 1100 mm Max. Table load capacity 5000 kg Grinding wheel width 150 mm Sanding spindle speed 960 rpm Machine weight approx. 30 tons

Year of construction: 2012, condition: like new (used), functionality: unexamined, machine/vehicle number: D500-D4000-16-T600-CNC-T, BRAND NEW UNUSED MACHINE AVAILABLE IN SOUTHERN INDIA Kdedpsw Em R Tefx Aabou

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 69,301 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: Truflow3200, laser hours: 41,349 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 140 m/min, repeat accuracy: 0.01 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: nozzle changer, Trumpf TruLaser 3030 (L20) Laser Cutting Machine Year of manufacture: 2013 Working area: 3000 × 1500 × 115 mm Rated laser power: 3,200 W Control system: Siemens Sinumerik 840 D SL Maximum sheet thickness: Steel (St): up to 20 mm Stainless steel (VA): up to 12 mm Aluminum (Al): up to 8 mm Maximum traverse speed: 140 m/min Positioning accuracy: 0.01 mm Dimensions: Length: 9,300 mm Kdodexmpn Ujpfx Aabou Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Equipment: Automatic nozzle changer, voltage stabilizers included

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Kedpfexgwa Ssx Aabjdu Automatic last rotating Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment Kodpfx Aajww E Nrobedu ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: Kdsdsq Nf Uwspfx Aabou 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. Kdsdpfoq Nf S Rjx Aabsu 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine Kdjdpfx Aaoq Nx E Sobju After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below.