Used Seed Drill for sale (5,018)

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Godpfx Aaenccx Hsbsuh

Condition: good (used), Year of construction: 2022, DESCRIPTION OF THE DRILLING MACHINE This is a high-performance automatic drilling center designed for furniture components. The machine is dedicated especially to large-scale production in small batches. The drilling machine allows for drilling two components simultaneously. WORKPIECE TRANSPORT The machine is equipped with a magazine from which the components are collected by grippers mounted on a chain conveyor. TECHNICAL SPECIFICATIONS: Workpiece length: 280 – 1500 mm* Workpiece width (1 piece): 45 – 450 mm Workpiece width (2 pieces), three-sided drilling (right, left, top): 45 – 400 mm Workpiece width (2 pieces), four-sided drilling (right, left, top, front/rear edge): 45–300 mm (mirror image: 45–350 mm) Workpiece width (2 pieces), five-sided drilling (right, left, top, front edge, rear edge): 45–300 mm Horizontal drilling: From 25 mm from the edge of the component along the X-axis Workpiece thickness: 12 – 40 mm Total power: Approx. 24 kW Weight: Approx. 5,500 kg Dimensions: 5,100 x 2,500 x 2,450 mm Number of top drilling units: 4 Number of horizontal drilling units: 1 left, 1 right Total number of spindles: 80 pcs.* Number of material stops: 2 pcs. Simultaneous drilling of 2 components: Yes Supported file formats: .dxf, .mpr *The drilling machine is available in two variants: maximum panel length 1,500 mm and 2,500 mm NUMBER OF DRILLING UNITS: Top vertical heads: 4 pcs. Left horizontal head: 1 pc. Right horizontal head: 1 pc. Gusdpfjvdq Ubsx Aabjh DUST EXTRACTION: Vertical heads: With dust extraction ports Horizontal heads: With dust extraction ports

Condition: good (used), Year of construction: 1954, Drill press, drill press, stand drill, pillar drill -Table size: 400 mm -spindle taper: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP transmission -Feed: 0.09-0.28 mm/rev -Tachometer: defective Gujdpjdi Smkjfx Aabeh -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Condition: ready for operation (used), Year of construction: 1981, Available immediately from Swiss toolmaking facility: Rapid radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Gsdpsxlc Aiefx Aabeuh Morse taper MK 4 Drilling capacity: 40 mm Arm reach: 1120 mm Installation height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total power consumption: 6.5 kW Hydraulic vice Weight: 2600 kg Offered at a price of EUR 2,500.— plus VAT ex location

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Gusdpfxjwvzrme Aabeh Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: new, Continuous drilling capacity in E 335: 18 mm Gusdocw H Syepfx Aabjh Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive Guoderz Tuwspfx Aaboh - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Godpfx Aasxcyz Robjuh Condition: Very good, used but like new Available immediately from stock.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 102-390, Hang 240-00 paper drill machine Guodpfjxlr E Hex Aaboh

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-STRUCTURE) Control and Motors: HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measurement systems, and handwheel) IKZ: Internal coolant supply, 20 bar Additional equipment: Gsdpfx Aexc Hpheabjuh Tool changer with double gripper, 60 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 measuring probe Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW Gjdpfx Ajxmvm Rjabsuh HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: new, Bernardo Twist Drill Set 25pcs. - 1 -13 mm - 0,5 mm rising - HSS TiN - coated Guodpfx Aaeikamfebeh

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch Gusdpfevu Dv Hex Aabeh - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: used, Year of construction: 1989, drilling capacity: 40 mm, quill stroke: 200 mm, throat depth: 800 mm, ★ TOP maintained machine from the liquidation of a well-known toolmaker - also check out our other listings★ ★ Rapid Radial Drilling Machine DONAU DR 40 DIGI with accessories ★ Year of manufacture: 1989 Machine number: 1164-1 Condition: Not tested Delivery terms: Free loaded on truck - unpackaged Location: 73347 Mühlhausen Availability: Early December 2025 - Items must be collected by the buyer in week 49/2025. The exact date will be specified by us. Earlier availability may be possible by arrangement. Guedpfoxiy Scjx Aaboh Payment terms: Advance payment - via bank transfer Internal no.: JO9 Available for inspection under power: YES ⚙️Technical Data Speed range: 35 - 1800 rpm Automatic feed Thread cutting capacity: M33 (M45) Max. drilling capacity: 40 mm (50 mm) Drill spindle taper: MK 4 Arm length: 800 mm Table height: 800 mm Table dimensions: 1200 x 600 mm Drill spindle travel: 200 mm (max. drilling depth) Motorized spindle head vertical adjustment (450 mm) Coolant system Digital display (programmable) Further technical details in the pictures Scope of delivery Available manuals Vice - jaw width 200 mm Angle plate Accessory cabinet and accessories as per pictures Dimensions & Weights Installation dimensions (L x W x H) approx.: 2200 x 1300 x 2800 mm Weight approx.: 2000 kg If you have any questions or would like to arrange a viewing, feel free to contact us. ⚠️Also check out our other listings⚠️ Additional notes: ►We expressly recommend collection by direct transport (freight forwarder) ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale exclusively to traders❗

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ Gsdpfxsxb Hgdo Aabouh 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, Year of construction: 2025, Sharpening device for drill bits made of HSS or any other hard metals, ensuring precise grinding and easy handling. Adjustable tip angle in the 90°–135° range. Machine features Precise grinding and convenient handling. Sharpening drill bits with ease. Portability due to its modest dimensions. Dressing wheel promising superb efficiency. Fully equipped; with a handle inside the device. Technical data Drill bits diameters capability ø2–13 mm Angle of the tip 90°–135° Moc 120 W / 230V Motor speed 4800 rpm Approx. weight 9 kg Dimensions 330 x 170 x 160 mm Default equipment Grinding wheel: 1 CBN (for HSS) 11 ER20 collets: ø 3 - ø 13 mm 1 clamping socket Gsdpfxovu Aako Aabjuh

Condition: used, Year of construction: 2003, BIESSE FDT THROUGH-THROUGH DRILLING MACHINE price: 20,000 €/net Working area along the "X" axis: max 3200 mm min 215 mm Thickness of processed elements max 65 mm min 9 mm Height of worktable from the floor: 900 mm 2 pcs. horizontal heads, each with 2 drilling heads with 11 spindles, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 11-spindle drilling heads with a quick change system with a 32mm spacing, without handles. Each head is activated by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front heads (Y1) along the screw guide by a crank for correct setting. • Pneumatic stroke activation with scale, for manual depth setting. • Switch for manual stroke execution • Pneumatic drilling speed setting • Max. distance between first and last spindle of horizontal head 704 mm • Max. Horizontal head stroke in the “Z” axis 5-40 mm 5 pcs. Lower vertical head Width 96 mm with 2 motors (each with 1.8 HP). Electronically activated drilling cycle. The head is equipped with: • Device for quick head change with the possibility of rotation, every 90°. • Quick positioning of heads along the beam (X axis) on a toothed guide with a gear wheel and encoder indicating the position; 2 roller guides; mechanical locking, pneumatic unlocking • Quick positioning of each head in the transverse direction (Y axis) using a ball screw and an encoder indicating the position; 1 roller guide; mechanical locking – pneumatic unlocking Gjdpfx Aaswpq Hmobjuh • Electronic activation via brushless servo motor; drilling parameter control via NC

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force Guedpfxod R A Dcj Aabjh - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Gsdpfx Aaor D T U Dsbouh Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: new, Technical data: Drill diameter: 3 - 20 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,12 kW weight, approx.: 8,6 kg Dimensions, approx.: 290 x 150 x 180 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 Godpfeh Hyqwex Aabeuh - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 14 - 20 mm - Collet holder ER 20, ER 25

Condition: used, Column drilling machine INFRATIREA - ORADEA Type PH - 031 Serial no. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 – short quill Throat 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 – 1500 rpm, 6 gear stages Motor output 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed via 6 gearbox stages - Right and left-hand rotation - Automatic feed 0.10 – 0.16 – 0.25 – 0.4 mm/rev - Swiveling drilling table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump in machine base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg Gjdpstrpifofx Aabjuh Good condition

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover Guedpfx Asv N Uyreabjh - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: new, Technical data: Drill diameter: 3 - 32 mm Point angle: 90° - 140 Speed of grinding wheel: 4800 1/min Connection: 230 V Motor power: 0,25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Features: - Ideal for grinding HSS/hard metal twist drills. - Easy operation - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device for perfect centering of the drill on the workpiece and to reduce the feed force during drilling - Device for relief grinding of the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN Gjdeh Hyrbjpfx Aabjuh - 10 ER collets ER 3 -12 mm, 20 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - Collet holder ER 20 and ER 40

Condition: new, Technical data: Drill diameter: 13 - 32 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Gusdpfx Aajd R A Dkjbsh Motor power: 0,25 kW weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: - Grinding wheel CBN - 20 collets ER 40, 13 - 32 mm - Collet holder ER 40

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Gedpfjb Eldnjx Aabsuh Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available