Used Seed Drill for sale (4,596)

Condition: good (used), Uchida GA-4W Four-Head Paper Drill This machine is in very good condition and ready for operation. Made in Japan. The machine has a number of features that make it easy to use, including: – four drilling heads with independently adjustable positions – a sliding programming bar – spacers for easy setup for drilling holes Technical specifications: Drill diameter: 2-10 mm, Stack height: 50 mm, Head spacing: 65 mm – 330 mm Weight: 370 kg 380V power supply Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. Waste discharge is directed outwards. Fjdpfx Aeynfu Iodaopd Front and side margins. Includes operating tools. New cutting stick, drill bits, and sharpener.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Glass drilling machine – year of manufacture 2019 Technical condition: very good | Ready for operation For sale: glass drilling machine from 2019. The machine is fully functional, operates stably and maintains high drilling precision. Key information: Year of manufacture: 2019 Fpsdjyn Sk Nepfx Adajd Usage: approximately 35,000 holes drilled Feed: electronic Maximum bar descent (Y axis): 850 mm Spindles replaced with new type Smooth operation, no play The machine is ready for further use Visual condition: Visible signs of corrosion are exclusively cosmetic in nature. They do not affect operating parameters or drilling accuracy. Additionally: It is possible, for an additional fee, to arrange: commissioning of the machine at the client's site by an authorized service, full calibration, operator training. The machine can be inspected before purchase – test drilling is possible.

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Fpsdpox Uyzqjfx Adaod ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Fpsdpfxoxt It Aj Adasd (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7689 TECHNICAL SPECIFICATIONS - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg ADVANTAGES – Made in Poland – Very good condition Fodoyarazjpfx Adaepd – Used drilling machine Net price: 6300 PLN Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, neu 2024 3983 prompt, Zwischenverkauf v Spanien 7400 € 142.82 € 1 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min 1,8 / 2,6 kW M24 600 mm 640 mm 2020 mm 260 kg 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 600 x 380 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN Fjdswirzropfx Adaepd (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots reverse for tapping DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.

Condition: new, Year of construction: 2024, neu 2024 3982 prompt, Zwischenverkauf v Spanien 10830 € 207.94 € 1 35 mm MK 4 300 mm stufenlos 100 - 2.000 U/min 3 kW bis M 27 1100 mm 600 mm 1950 mm 360 kg 0,10 / 0,20 / 0,30 (3) mm/U 150 mm 125 mm 90-890 mm 1250 mm Fpsdpfx Ajwiqvuedajd 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard HEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels more particularly robust parts for wear resistant operation and smooth running compact design with high performance CE norms user manual in GERMAN

Condition: used, functionality: fully functional, TENAX Horizontal Drilling Machine - after technical inspection, ready for operation Specification: • Condition: used, after comprehensive inspection • Manufacturer: TENAX • Table adjustable at an angle, size 50 x 21 cm • 2.5 HP motor (3-phase) • Four-knife shaft with helical shaft • Overall dimensions: 80x60x166 cm (L x W x H) Additional Information: • The machine is in good technical condition, ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to power on and check the machine on site • Auction price does not include VAT or transport costs Fpodpfx Ajytprhsdajd Financing and Transport: • We arrange transport via MDD fleet, courier companies, or external carriers • Financing support available in the form of leasing or lease loan

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. Fjdpoytq R Ejfx Adaepd - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030724/2003, Used drilling and milling machine Serrmac TCO 40. Fedpfxewrb Sxo Adajpd Model TCO 40/P Clamping: MK4 Drilling up to 40mm Year of manufacture: 2003 Belt transmission - 3 pulleys Spindle speed: from 100 - 2200rpm Speed change - 2 x with motor 5x with belt shifting Table dimensions: 630x255mm Table stroke: 425x240mm Coolant pump

Condition: like new (used), functionality: fully functional, 5 pcs drill rod adapters SANDVIK Model: T51 HL1000PE D52 L840 Fpjdpfxeyr Iqgj Adaed Part no.: 7306-6019-02 Total length: 840 mm Suitable for drilling rigs with long extractor (52 mm bearing diameter)

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Fodsxlqxfepfx Adaepd Condition: good, workshop-tested, speed variator with new bearings

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Fsdpsytpl Ujfx Adajpd Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland Fodpfx Adjynnczoaepd 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (List price €115.43) - FLOTT tap holder B16 (List price €191.57) - Taper mandrel DIN 238 MK2/B16 (List price €26.18) - Taper mandrel DIN 238 MK3/B18 (List price €28.57) - Reducing sleeve DIN 2185 MK3/MK2 (List price €26.18) - Felix 2.0 - 120 mm (List price €571.15) YOU SAVE: 1.013,98 € Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 5309.85 € 102.48 € 18 mm MK 2 240 mm 30 - 3000 U/min 0.75 kW M12 (steigungsabhängig) 705 mm 355 mm 1825 mm 195 kg manuell mm/U 82 mm 180 - 870 mm 340 x 280 mm 100 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43) - FLOTT tap holder B16 (list price €191.57) - Taper mandrel DIN 238 MK2/B16 (list price €26.18) - Taper mandrel DIN 238 MK2/B18 (list price €26.18) - Felix 2.0 - 100 mm (list price €428.36) YOU SAVE: 842,62 € Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Fpsdpsynmz Ajfx Adaod Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, gebraucht 3985 prompt, Zwischenverkauf v Fpsdpfx Aoynmyxsdaed Schweden 1800 € 1 25 mm MK 3 235 mm 100 - 2080 (8) U/min 750 mm 900 mm 1550 mm 250 kg Quill travel by handwheel Height adjustable and swiveling drilling head Cross table with manual feed in X and Y axes Does not comply with the German UVV and Austrian AMVO no operating manual

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 39200 € 748.72 € 50 mm MK 5 350 - 1.600 mm 56 - 1.450 (12) U/min Stahl/Guß: M40/M50 2670 mm 1120 mm 2410 mm 3300 kg 465 - 1.420 mm 0,06 - 0,2 (3) mm/min 3.7 kW 320 mm 270 mm Fpedsynmt Sepfx Adaed 2.550 x 970 x 200 mm 1,5 kW 630 x 500 x 500 mm 2760 mm 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 30100 € 574.91 € 50 mm MK 5 360 - 1.250 mm 44 - 1.206 (12) U/min Stahl/Guß: M40/M50 2060 mm 995 mm 2240 mm 2300 kg 441 - 1.345 mm 0,06 - 0,2 (3) mm/min 3.7 kW 300 mm 270 mm Fpodpfeynmt Esx Adajd 1.785 x 785 x 190 mm 0,75 kW 635 x 520 x 420 mm 2645 mm 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard Fedeynmtxjpfx Adaspd OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: new, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 2,000 rpm, rotational speed (min.): 38 rpm, overall weight: 3,800 kg, Equipment: CE marking, The RD 1600 VARIO radial drilling machine is a professional device for drilling holes in metal, wood, and other materials. Thanks to its high power and robust design, it ensures fast and precise drilling even under the most demanding conditions. The powerful 4.0 kW motor is equipped with a frequency inverter and offers a wide speed range of 38–2000 rpm. The arm, spindle head, and column each feature independent hydraulic clamping. The worktable measures 1740 x 980 mm, and the machine is equipped with automatic spindle feed, a coolant system, and motorized arm height adjustment. Maximum drilling capacity is 60 mm; tapping capacity up to M46. Standard features include stepless speed control with readout on a digital display, high spindle alignment with automatic brake, arm, head, and column all fitted with independent hydraulic clamps, a solid base suitable for machining large workpieces, and a massive, ground column ensuring smooth arm movement. The arm's motorized lifting function allows for series production without changing the spindle position. Control panel buttons allow locking/unlocking the head and column either together or individually. The arm guides are hardened and ground, and the machine's perfect balance ensures ideal feed of the spindle. Ideal for drilling, counterboring, reaming, and tapping. Technical specifications Maximum drilling capacity: 60 mm Maximum tapping capacity: M46 Spindle taper: MT5 Minimum spindle speed: 38 rpm Maximum spindle speed: 2000 rpm Spindle speed change—number of ranges/stepless: Stepless (38–275, 275–2000) Drive method: Gearbox Automatic spindle feed range: (8) 0.06–1.00 mm/rev Min. spindle/column distance: 350 mm Max. spindle/column distance: 1600 mm Spindle/table distance: 165–750 mm Min. spindle/base plate distance: 665 mm Max. spindle/base plate distance: 1250 mm Vertical travel of arm with head: 585 mm Horizontal travel of drilling head: 1250 mm Quill stroke: 325 mm Column diameter: n/a Cube table size: 750 x 500 x 500 mm Base plate working area: 1740 x 980 mm Motor power: 4 kW Voltage: 400 V Dimensions (W x D x H): 2600 x 1100 x 2770 mm Weight approx.: 3800 kg Scope of delivery Cube table MK 5 / B 16 drill chuck Reduction sleeves MK 5/4, MK 4/3, MK 3/2 LED lighting Filled with Shell Tellus 46 oil Coolant system Inverter Digital speed readout Fpsdpfx Adjytfxksaod Lifting motor Hydraulic motor Guarding Service tools Legally required safety guards Complete operation and maintenance documentation (Polish DTR) CE certificate 24-month full warranty without extra charges

Condition: new, functionality: fully functional, input voltage: 400 V, tool diameter: 50 mm, spindle mount: MK 4, actuation type: electric, rotational speed (max.): 2,200 rpm, rotational speed (min.): 55 rpm, table width: 800 mm, table length: 260 mm, overall weight: 800 kg, Equipment: CE marking, rotational speed infinitely variable, The GB 55 SK NC VARIO drill press is equipped as standard with a large cross table and a 2-axis digital readout, allowing not only drilling but also precise milling operations. The automatic spindle feed and tapping function significantly enhance the capabilities of the machine. Stepless spindle speed adjustment is available within the range of 55–2200 rpm. Thanks to its robust construction and large drilling capacity, this model is well-suited for series or industrial production. The NC version features a programmable controller for setting, among other things, drilling depth, spindle speed, and automated tapping. Drilling capacity is 50 mm, tapping up to M42. Key features: - NC version with programmable controller for setting drilling depth, spindle speed, and automatic tapping, etc. - 6-range automatic spindle feed, adjustable electromagnetically including tapping function - Rigid machine construction ensures vibration-free operation - Powerful drive motor suitable for continuous operation - 2-axis digital display for high machining accuracy - Heavy-duty base plate with T-slots and integrated coolant system - Comprehensive standard equipment - Quiet machine operation thanks to hardened and ground gears - Safety covers meet latest CE standards - Automatic tool ejector - Quick tool change enabled by the automatic ejector - Electronic indicators for drilling depth and spindle speed as standard - Stepless speed adjustment Technical Specifications: - Maximum drilling capacity: 50 mm - Drilling capacity in castings: 60 mm - Maximum tapping capacity: M42 - Drill chuck capacity: 1–13 mm / B16 - Spindle taper: MK 4 - Spindle speed min.: 55 rpm - Spindle speed max.: 2200 rpm - Speed change: stepless (55–348/348–2200) - Drive transmission: gear - Automatic spindle feed range: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev - Drilling table tilt: -45° to +45° - Max. distance spindle/column: 380 mm - Max. distance spindle/table: 480 mm - Max. distance spindle/base: 1165 mm - Quill stroke: 210 mm - Column diameter: 150 mm - Table size (width): 800 mm - Table size (depth): 280 mm - Cross table travel (X x Y): 415 x 290 mm - T-slots (number, size): 14 mm - Motor power S1 100%: 3.0 kW - Voltage: 400 V - Dimensions (W x D x H): 1230 x 1240 x 2310 mm - Weight approx.: 800 kg Scope of delivery: - 2-axis ES-12H LCD digital display - Cross table - Drill chuck 1–13 mm / B16 Fpodpeytfuxsfx Adaed - MK4 / B16 arbor - Reducing sleeves MK4/3, MK4/2, MK3/1 - Coolant system - Tapping mode - Electromagnetic spindle - Automatic tool ejector - LED lighting - Movable guard - Electronic indicators for drilling depth and spindle speed - Stepless spindle speed adjustment

Condition: new, functionality: fully functional, input voltage: 400 V, tool diameter: 32 mm, rotational speed (max.): 3,200 rpm, rotational speed (min.): 75 rpm, table width: 500 mm, table length: 455 mm, overall weight: 340 kg, Equipment: CE marking, The GB 35 HSV bench drill is a professional machine designed for drilling in metal, wood, and plastics. It features a high spindle speed (75–3200 rpm) and comprehensive equipment to ensure precision and work efficiency. Motor power: 1500 W, automatic spindle feed, tilting drill table, cooling system, and LED work light. Standard equipment includes automatic spindle feed Robust base plate for machining large workpieces 2-range motor with 12 speeds up to 3200 rpm Supplied with a 3–16 mm / B16 quick-release chuck Fpodpfx Adsytft Ieasd Large drilling table with T-slots (14 mm) Simple and quick speed change via lever operation High precision due to ground gear wheels in the transmission Feed operation switched via clutch Reverse function enabling tapping operations Drill head tiltable 180° and rotatable 360° Cooling system and LED lighting included in delivery Technical specifications Maximum drilling capacity: 32 mm Drilling capacity in cast: n/a mm Maximum tapping capacity: M20 Drill chuck: 1–16 mm / B16 Spindle taper: MK 4 Spindle speed min.: 75 rpm Spindle speed max.: 3200 rpm Speed change – number of steps / stepless: 12 Transmission type: Gear drive Automatic spindle feed range: 0.10 / 0.18 / 0.26 mm/rev Table tilting range: -45° to +45° Drill head swing: 180° & 360° Max. spindle-to-column distance: 295 mm Max. spindle-to-table distance: 775 mm Max. spindle-to-base distance: 1185 mm Quill stroke: 125 mm Column diameter: 115 mm Table size (width): 500 mm Table size (depth): 455 mm Base working surface: 375 x 365 mm T-slots (number, size, spacing): 14 mm Motor power: 1.5 / 2.2 kW Continuous duty motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions (width): 630 mm Dimensions (depth): 700 mm Dimensions (height): 2050 mm Weight approx.: 340 kg Scope of delivery Quick-release chuck 1–16 mm / B16 Drill chuck arbor MK 4 / B16 Reducing sleeve MK 4 / 3 Guard Service tools Digital depth display Cooling system LED lighting

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Technical specifications Max. drilling capacity: 32 mm Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Spindle taper: MK 4 Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Fsdoytdy Topfx Adaepd Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Fpedpex D Dnkjfx Adaed Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Fjdpfox S Sizjx Adajpd Application Types Boring & Drilling (Wood)