Used Seed Drill for sale (5,002)

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Lodpfx Asm Rg Npjkmjhn Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg.

Condition: used, Drill sleeve, MK 4 Length 170 mm Lhodpfxsb Tyqao Akmen Diameter 63 mm

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Lhsdpfxottriwj Akmsn Maximum spindle speed 2000 1/min

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm Lhsdpfskahu Ujx Akmjn turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank Lhedpfxjupw Uzj Akmen

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm Lsdpfx Akeupxcyemshn table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad Ljdpfeupxdqex Akmehn connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, grinding range 2 - 20 mm Lodpfxoupxkwo Akmehn sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, bore capacity in steel (diameter) 45 mm Lhjdpfx Akeupxrnemjn quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TL 4 is a highly stable, T-shaped milling center with a large rotary table and a large working envelope. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Technical features: Control system: • HEIDENHAIN TNC 7 digital control • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position drum magazine with dual gripper Chip removal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Lhodpfoq I Nlyjx Akmsn Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: excellent (used), Year of construction: 1987, max tool diameter: 16mm max hole depth: 160mm max milling length: 160mm front/rear drilling apparatus adjustment working table dimensions: 620x280mm table rotation angle: +20˚ adjustment of table up/down and sideways material pressure Lhedpfx Aoqwdxxskmsn motor power: 1,5kW dimensions L/W/H: 1100x650x1200mm weight: 280kg

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m Lhsdpfxjfv H Hqe Akmon domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V Lhsdpfx Asfv H Huokmjn diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: Lhedofg U Tpepfx Akmon - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen Ljdpfx Asfg U Ttjkmjhn column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 1-13 mm arm length: 100 mm workpiece height max.: 400 mm total power requirement: 3 kW dimensions of the machine ca.: 2.0 x 1,2 x 2,2 m bore spindle turning speed range: 0-3000 U/min boring spindle drive: 2,2 kW max. Y-axis travel: 550 mm max. Z-axis travel: 300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Lhjdpfx Akjz Hfl Tsmjn Table size is 100 x 50 cm Stroke length approx. 200 mm *

Condition: good (used), functionality: fully functional, Gillardon GB30 pillar drilling machine Speed range: 60-1600 rpm Lodpfx Akjz Ngr Iomjhn Spindle taper: MK3 Overhang: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Drill spindle stroke: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970mm Weight approx. 400 kg

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Ljdpfx Akez Nxwcsmjhn Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Lsdsz Nxtkopfx Akmehn Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: used, Year of construction: 1998, Fehlmann Picomax 60M Lhedpsz N Huvofx Akmjn

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) Lsdpfoyrhppjx Akmohn are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Ljdpfx Ajz I Dimjkmohn Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: good (used), Column drill press, without table. Lsdpfxjz Ih Dze Akmshn

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AX 3/S, drilling capacity in steel 40 mm, spindle speeds: 160-2250 rpm, short spindle MK3, spindle stroke: 120 mm, overhang: 293 mm, column diameter: 115 mm, machine table usable support surface: 514 x 360 mm, with T-slots 2 x 14 mm x 224 mm, distance spindle-table min./max. 117/701 mm, machine table height adjustment via hand crank, machine height without options: 1840 mm, net weight: 260 kg. Standard equipment: Main switch with locking mechanism Motor with thermal protection contact Lhedpfxsz E Sqyo Akmsn Mushroom push button (latching) for EMERGENCY STOP Speed adjustment, stepless Spindle guard with electrical protection Main switch Right and left rotation Protection class IP 54 Motor insulation class "F" (155°) Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Digital drilling depth display Zero point setting (drilling start) 5-digit LED display, character height 13 mm, item no. 37.1 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5122, Offer 26250 Technical data: Drilling capacity in steel ST 60: 32 mm Drilling capacity in steel ST 60: 40 mm Lsdpfx Aez I Sd Sekmjhn Long spindle, MK 3 Drilling spindle speeds, continuously variable: 160 - 2250 rpm Drilling spindle stroke: 120 mm Overhang: 293 mm Column diameter: 115 mm Machined base plate with T-slots: 400 x 400 mm Max. distance from base plate to spindle: 600 mm Emergency stop button Space requirement: approx. W 450 x H 1250 x D 900 mm Weight: approx. 250 kg Quick-change drill chuck Table stand