Used Semi Automatic Strapping Machine for sale (1,09,285)

Year of construction: 2012, condition: like new (used), Ideal Table-top combination scale to make fixed weighing packages Multihead Scale The Table-top DataweighTM TDW-205W enables even novice workers to perform fixed weighing easily. This is an ideal combination scale to reduce weighing loss and realize optimized inventory control. Catalog Features Hsdokvpmdepfx Aabofn 【FEATURES】 ■ Eliminating weight shortage in fixed weighing ■ Dramatically increasing the production speed for fixed weighing ■ Improving weighing quality and reducing weighing loss ■ Waterproof IP-65, Stainless steel construction ■ Priority head combination function This function assigns a selected weigh head priority to always be included in the combinations. ■ Weight & Quantity combination function This function allows a combination to be made by a pre-determined number of weigh heads. ■ Unit weight setting function In order to remove irregular sized items, the lower and upper limits of the unit weight can be set in advance. ■ Production goal function The combination work will automatically finish when the goal, the pre-determined number of packages is achieved.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Hfodpfxoxmuzao Aaben Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Year of construction: 2013, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Model: Laminating 1110 FA Year: 2013 Technical Specifications Max. sheet size: Width: 1100 mm Min. sheet size: Width: 200 mm /Length: 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Hedjxnzm Ejpfx Aabjfn Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air

Condition: used, Year of construction: 2021, Serial number: VS94NTRGSMA86xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21540 Specifications: EU-approved until 28.07.2026 2021 model Tires (see pictures) Length: 1,290 cm Width: 255 cm Axle distance: 181/181 cm Curb weight: 13,940 kg Max payload: 59,060 kg Hydraulic loading ramps Hedpfx Ajxm S Udoabefn Lift on 1st axle Toolbox Description:Rojo semi low-loader from 2021 with a maximum payload of 59 tons.The trailer is EU-approved until July 2026.Available for prompt delivery. Technical approved: Yes EU-approved until: 28.07.2026 Own weight: 13940 Total Weight: 73000 Payload: 59060 Width: 255 Length: 1290 Model: 2021 Rojo Maskinsemi m/ hydrauliske kjørebruer

Condition: good (used), Heidelberg Cylinder SBB 56×82 Automatic Die Cutter One of the rarest models on the market. The machine has been serviced and maintained on time. Hjdpsxgbf Esfx Aabsfn Superb condition! Format: 560x820mm Machine ready for die cutting. Fully automatic, smooth speed control, central lubrication, and safety guards. Includes frame, cylinder plate, trolleys, and a set of fillers and locks.

Condition: good (used), Year of construction: 2003, Tsguami BS18DE(S)-III CNC automatic lathe Hfodpfxeq E Ra Ss Aabjn Good condition Incoterms EXW CH-4528 Zuchwil The complete photo gallery and the technical data can be found in the attached catalog. No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Good working condition Hfedpfxjr Hdhho Aabsn

Condition: excellent (used), Year of manufacture: 2020. Frame dimensions: Min. W = 650 x H = 400 mm / Max. W = 1650 x H = 1200 mm Machine width: 1254 mm (with frame width 650 mm) Machine height: 1403 mm (with frame height 500 mm) Machine depth: 609 mm Table height: 794–899 mm (mechanically adjustable) Machine weight: 146 kg Packaging dimensions: Min. W = 80 x H = 30 mm Hfedpfjwxw Txox Aabsn Speed: 1.1 sec/cycle Band widths: 5*, 9, 12, (15.5) mm (standard = 12 mm) Tensioning force: Max. 450 N Sealing method: Heat welding Material: Polypropylene, on roll Core diameter: Inner diameter 200 x width 200 mm Supply voltage: 230 V 1PH + PE / 50 Hz

Condition: used, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Model: Laminating 1420 FA Technical Specifications Max. sheet size: Width 1420 mm Min. sheet size: Width 200 mm /Length 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air Hfedpfoxnzmfex Aabsn

Year of construction: 2022, condition: used, Control, protective enclosure, air table, slat conveyor, weight: 3,000 kg, power: 24.94 kW Hjdpfoxnac Sjx Aabjfn

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Hodpfx Ajxgbffsabjfn This machine is ready for production. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes a mounting frame, cylinder sheet, trolleys, and a set of fillers and locks. Transport and installation are available.

Condition: good (used), Year of construction: 2004, Pfäffle F 64 a Automatic Punching Machine For automatic and continuous punching of binding perforations for loose leaf binding, filing hole systems, corner rounding, index cutting and other edge perforations. Including the punching tools Technical details Max. paper size 420 x 420 mm Min. paper size 210 x 100 mm Punching thickness up to 2 mm Punching speed 4.200 – 5.000 punch operations/hour Punching capacity up to 8 m paper pile / hour Electrical equipment 230/400 V; 3 phase; 50/60 cy; 0,75 kW Hfodeu T Dixopfx Aabon Required floor space 1,80 m x 0,90 m 2,10 x 1,00 m Weight 600 kg

Condition: good (used), Giro CM 92 net loader Hfedpfxer Hdh Ns Aabsn

Condition: excellent (used), Year of manufacture 2020, opening width 1400 mm, opening height 1000 mm, with 2 work tables Hfjdpfowxw Ucox Aabjn

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm Hodpjkfp D Tjfx Aabjfn rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: used, Year of construction: 2009, with protective enclosure, control system, strip conveyor, machine weight: 3,100 kg, power: 24 kW Hsdpfsxnadcsx Aabjfn

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator The machine is in very good condition. Manufactured in 2014. Includes a 3:1 perforation tool, a round hole, and a cutout for the hanger. Manufacturer’s description: Perforation machine with a working width of up to 360 mm Designed for continuous operation and heavy loads The unique „Two-finger” system ensures perfect reception of sheets of varying weights Two-shelf platen feeder enables continuous operation After perforation, the sheets rotate around a special drum, maintaining the correct page sequence at the receiving station. Option to use two-piece perforation strips, enabling the perforation of both books and calendars. Perforation up to 2.4 mm in a single cycle. Quick and easy replacement of perforation strips. Option to use strips with or without a cutout for the hanger. Quick format changes by disabling selected needles without having to remove the bar. A jogging device is located on the delivery. 230V power supply Weight: 720 kg Hsdpsxgbc Defx Aabsfn

Year of construction: 2024, condition: used, functionality: fully functional, Maximum paper feed size ( mm ): 1320*980mm Minimum paper feed size( mm ): 350x450mm Maximum die cutting size( mm ): 1300x960mm Minimum mouth size( mm ): 8mm Maximum die cutting pressure( T ): 350N/cm² Hsdpfx Ajw Rwipeabefn Machinable paper( mm ): 200-2000g/ m² / 10mm (max thickness) Die cutting accuracy( mm ): ±0.1mm Maximum speed(sheets/hour): 5500 sheets/h Maximum stack height of paper feed(mm): 1400mm (above the level) Minimum stack height for receiving paper(mm): 1250mm (above the level) Gross power(KW): 18.5kw Machine weight(T): 19 T Overall dimension: 7500x2200x2250mm

Condition: ready for operation (used), Year of construction: 2021, For sale is the hamburger automatic broiler shown in the pictures.. Automatic baking. The two factory feed belts are missing. According to my idea, I wanted to bake hamburger patties made from fresh meat continuously. Then I would have packaged the ready-made hamburger meat and frozen it. Hfodowcguyjpfx Aabjn The fresh meat patties would have been transported to the oven by a feed belt (which is in the picture). After the conveyor table, the chute is still needed, which is not ready. But this production did not take place. The oven and the conveyor belt are in good condition and everything works. But the two machines still need to be coordinated.

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. Hodpfx Aaogwct Debefn • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 200 V, Mitsui precision grinder, surface grinder manufacturer Mitsui MGG CO.LTD type: MSG-250H2 year of manufacture:1990-6 Table width: 200mm Table length: 480mm Table longitudinal movement, maximum: 520mm Table lateral movement, maximum 250 mm Table movement: 5-20m/min Forward-backward feed: Per revolution: 6 mm Per scale: 0.02 mm Lateral feed: Per revolution: 6 mm Per scale: 0.01mm Grinding spindle speed: 2900 rpm 50 Hz Table total length: 1385x285 mm Magnetic table: 300x130x100 mm Coolant unit, Maximum height from table surface to center of grinding wheel axis: 400 mm Hfjdowviaropfx Aabjn Grinding wheel diameter, standard: 205mm Grinding wheel width: 20mm Wheel spindle speed: 2900 rpm 50Hz Grinding wheel bore diameter: 31.75mm Electrical power: 2 HP 1.5 KW 4P 200V 3 phase Weight, approx.: 1105 kg

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Hjdpfx Aajh T Dzqsbofn Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: good (used), Rilecart PB-796 HD Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically perforates, feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 600 x 700mm Min. feeder size: 120 x 100mm Max. thickness: 4.5mm Table with folded sheet feeder Die-cutting module for wire binding Die-cutting module for hanger Automatic hanger loading and mounting Automatic wire feed from the roll with wire spacer removal Closing module Delivery Central controller for the entire device Capacity up to 2300 cycles/h 380V power supply + compressed air Hedpfx Aasxgbcwsbefn The machine has a central lubrication system. Weight: 2200 kg The kit includes many additional components, tools, and documentation.

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, input voltage: 220 V, total length: 2,750 mm, total width: 850 mm, total height: 2,000 mm, type of input current: three-phase, overall weight: 500 kg, Almost unused machine. Hfodpfexayxkex Aabsn

Year of construction: 2019, condition: used, machine/vehicle number: 19002CA, mobile on wheels, own weight: 1600 kg, machine control, manufacturer: OMRON, with 4 winding stations and various accessories Hfjdsxad E Iopfx Aaben