Used Service Station for sale (19,889)

Condition: used, WSM Stationary Screwing Unit, Screwing Station Assembly of parts for car radios and navigation systems, as well as testing of these parts. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with a holding (locking) function. In automatic operation, the doors are locked and can only be opened when the automatic cycle is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic cycle cannot be started with the door open. Functional sequence: The station is supplied with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a single unit passing through. In normal operation, all 3 stations work in parallel. - Positioning the unit with the pre-assembled unit in station 2.1 Chodpfx Afeibichsxod - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparing with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.3 - Lowering the light protection cover and establishing contact, positioning the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD and CD slots and buttons - Function test of the CD eject button - Lowering the unit onto the belt > continue If errors occur during the test, they are displayed on the screen and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic cycle, the unit is tested again in the station. If no repair is possible (e.g. screwing error), the unit is marked as NIO (Not In Order) in the control system and is not processed further. A manual NIO marking and removal is also possible. More assembly stations, new and used – find them in our shop! International shipping costs available upon request!

Condition: ready for operation (used), operating hours: 7,381 h, functionality: fully functional, mileage: 53,179 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 From first owner = former municipal/authority vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 51,892 km in 10/2025 Machine version with new pedal system 4,297 sweeping operating hours 7,381 total operating hours 53,179 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,900 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawnmowers (not included in the scope of delivery) Errors, changes and prior sale reserved Chjdpfx Asz R Ac Sofxod We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale reserved We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturdays by appointment. Outside of these opening hours, telephone appointments can be arranged. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters are given priority, and this applies to our entire vehicle stock. The aforementioned information is non-binding, errors/changes and prior sale reserved!

Condition: excellent (used), functionality: fully functional, Sanitary gate/sluice Brand ITEC Model 23830 Chsdpfx Afov S Iuzexjd Year of production 1999 Voltage 3x400 50Hz Power 1.25kW Dimensions 2300x1200x1700mm

Year of construction: 2013, condition: good (used), Sanitary Gate/Hygiene Station Elpress 12705749-83202080 Manufacturer: Elpress Cleaning Systems Model / Type: 12705749-83202080 Serial Number: 17785 Year of Production: 14.01.2013 Cjdpfx Afow Ht N Soxohd Power Supply: 400 V / 50 Hz 16 A Rated Power: 0.1 kW Operating Pressure: 3 bar Maximum Temperature: 40°C Weight: 180 kg Dimensions: 2500x950x1550 mm

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Chsdex H Al Aopfx Afxjd Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: excellent (used), mileage: 1,23,456 km, total length: 5,900 mm, total width: 2,450 mm, total height: 2,160 mm, Water treatment system, 3000 liters Air conditioning Auxiliary heater Deutz engine 20 kW diesel engine Generator 5.90 x 2.45 x 2.16 m Only 100 operating hours Like new! Chjdpfozdryhox Afxjd = Further information = Year of manufacture: 1999 Design year: 1999 Model year: 1999 Technical condition: very good Optical condition: very good

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: ogs30-GA-130-40-MZ, tank capacity: 30,000 l, this is a 30m³ storage tank, it is pre-owned but overhauled and can be used to store diesel, it has also a diesel pump which is new Cedocybvzspfx Afxjhd

Condition: good (used), mileage: 2,16,261 km, power: 55 kW (74.78 HP), first registration: 09/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,660 mm, fuel: diesel, fuel tank capacity: 60 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, permissible axle load (axle 1): 1,125 kg, permissible axle load (axle 2): 1,050 kg, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, sliding door, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Armrest - Audio controls on the steering wheel - AUX input - Becker holder - Tachometer - Third brake light - Driver's seat height adjustment - Remote central locking - Tinted glass - Rear doors - Dealer maintained - Adjustable steering wheel - Folding exterior mirrors - Multifunction steering wheel - Particle filter - Disc brakes - Headlight height adjustment - Immobilizer - Partition without window = Additional Information = General Information Number of doors: 5 Year of manufacture: 2017 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 1,499 cc Maximum front axle load: 1,125 kg Maximum rear axle load: 1,050 kg Weights Unladen weight: 1,426 kg Payload: 579 kg GVW: 2,005 kg Condition Technical condition: good Optical condition: good Damage: none = Company Information = Nidro cars Holland is located in the center of the country and is the right place to buy your car, van, or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: Chsdpfszf A Sdox Afxjd SEE OUR ENTIRE INVENTORY AT All types of trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: repair required (used), We repair all types of DALEX spot welding machines throughout Germany and in neighboring countries. Our experienced service technicians perform professional repairs either at our facility or on-site, whether on standard machines or custom resistance welding systems from a wide variety of manufacturers. We maintain a very extensive inventory of spare parts for the following machine manufacturers: - DALEX - NIMAK - DÜRING Cedpfx Asy Uip Dofxohd - ARO - KUKA - CEA - TECNA - PEI - PECO Messer Grießheim - and others upon request as well as training and parameterization services for all resistance welding machines. --- Further information on our website

Operating hours: 9,926 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: H25D-02 EVO Year of manufacture: 2015 Operating hours: 9,926 h Drive type: Diesel Lifting equipment Mast type: Triplex mast Full free lift: available Lifting height: 4,723 mm Fork length: 1,200 mm Load capacity: 2,500 kg Side shifter: available 3rd hydraulic valve: available MACHINE DETAILS Dimensions and weight Length: 3,800 mm Width: 1,200 mm Height: 2,154 mm Own weight: 3,770 kg Maintenance and inspection Next service due in: 734 h UVV (German Industrial Safety Regulation) valid until: EQUIPMENT Semi-cabin Windshield wiper LED work light (front) Blue Safety Light (rear) Comfort seat with lumbar support Seat heating Side shifter 3rd hydraulic valve Triplex mast with full free lift All dimensions are rounded figures. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 91 Codpfez R Duiex Afxjhd

Operating hours: 1,801 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 2,000 kg Forks Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery resting voltage: 24.6 V Operating data Operating hours: 1,801 h Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) certificate valid until: 09/2027 MACHINE DETAILS General Manufacturer: Linde Chodpfoz R D E Uox Afxsd Type: T20AP Year of manufacture: 2022 Dimensions and weight Overall length: 1,900 mm Overall width: 800 mm Overall height: 1,000 mm Own weight: 800 kg EQUIPMENT Fronius battery charger Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 331

Operating hours: 3,380 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 2,000 kg Forks Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery voltage at rest: 24.7 V Operating data Operating hours: 3,380 h MACHINE DETAILS General Manufacturer: Linde Type: T20AP Year of manufacture: 2020 Own weight: 900 kg Dimensions Overall length: 2,000 mm Overall width: 800 mm Overall height: 1,400 mm Inspection UVV valid until: 06/2027 (?) EQUIPMENT Safety light at the front Safety light at the rear All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Chjdpfx Afjz R D Hroxod Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 342

Condition: used, machine/vehicle number: 516305X00392, Year of construction: 2020, operating hours: 9,411 h, load capacity: 3,000 kg, lifting height: 4,150 mm, mast type: duplex, fork length: 2,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Csdpfoz Nv A Aox Afxjhd Load capacity: 3,000 kg Lifting height: 4,150 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex mast Free-lift mast: Without center hydraulic cylinder Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery voltage in idle state: 87.5 V Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Dead weight: 5,100 kg Service valid until: 04/2027 UVV certificate valid until: 04/2027 Operating hours: 9,411 h EQUIPMENT Fork positioner with side shifter Semi-cab with windshield wiper Lateral fall protection, detachable LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Previously a Still full-service unit 3rd and 4th valve Fork adjustment: Hydraulically adjustable Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 122

Condition: used, machine/vehicle number: H2X386V04688, Year of construction: 2019, operating hours: 21,389 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,050 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Battery: 48 V, 625 Ah, 5 PzS Battery year of manufacture: 23.06.2023 Battery voltage at rest: 51.1 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 21,389 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support and seat heating Chedpfx Asz Nwknofxed Facelift model with tilt angle indicator Hydraulics: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 164

Condition: used, machine/vehicle number: H2X386V04486, Year of construction: 2019, operating hours: 22,973 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment: 350–1,050 mm MACHINE DETAILS Mast: Triplex mast with full free lift Cedpfxjz Nwpwj Afxehd Drive type: Electric Battery: 48 V, 625 Ah Battery year of manufacture: 2023 Battery voltage in idle state: 50.3 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 Operating hours: 22,973 h EQUIPMENT Former Linde full-service unit Facelift model with tilt angle indicator Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 165

Operating hours: 7,209 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,400 kg Lifting height Lifting height: 1,844 mm Forks Fork length: 1,150 mm Battery Battery type: Lithium-ion Battery voltage: 24 V Battery capacity: 410 Ah Measured idle voltage: 25.5 V Operating data Csdpfxjz R Rfpj Afxehd Operating hours: 7,209 h MACHINE DETAILS General Manufacturer: Linde Type: L14AP Year of manufacture: 2022 Own weight: 1,400 kg Dimensions Overall length: 210 mm (?) Overall width: 800 mm Overall height: 1,490 mm Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 EQUIPMENT Folding platform Lithium-ion battery Charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 464

Condition: used, Year of construction: 1999, Horizon VAC-100m Air-Suction Collator Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacity without investing in completely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Key Features: Cost-efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and allows you to expand existing systems efficiently. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly expand your collating capacity to up to 60 stations. This enables efficient handling of large jobs and a significant increase in your production capacity. Chedpez Ha E Uofx Afxed Reliability: With error prevention features such as misfeed, double-feed, and jam control, the VAC-100m ensures that your production runs smoothly and without interruptions. Specifications: - Technology: Touch & Work (via VAC-100a) - Number of stations: 10 per tower - Expandability: Up to 6 towers (60 stations) - Error prevention: Misfeed, double-feed, and jam control - Job memory: 9 storage slots for repeat orders - Programs: Double cycle (non-stop operation), sheet insertion (single and double), booklet making program, block program, selective collating - Sheet size: Max. 500x350 mm; Min. 148x120 mm - Paper weight: 40-250 g/m² - Loading capacity: 55 mm per station - Performance: Up to 9,500 sets/h - Power: 230V; 50/60Hz - 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, machine/vehicle number: H2X388V00602, Year of construction: 2019, operating hours: 15,156 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,700 mm Load capacity: 4,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,560 mm Codoz S Nnwopfx Afxohd Own weight: 8,000 kg Battery date: 02/11/2022 Battery voltage: 80 V Battery capacity: 775 Ah Resting voltage: 81.1 V Service valid until: 08/2027 UVV (Occupational Safety) certificate valid until: 08/2027 Operating hours: 15,156 h EQUIPMENT Formerly a Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork positioner with side shifter Integrated scale Display of the tilting angle Windshield with windshield wiper Roof window Lateral fall protection White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Safety Light (front) Safety Light (rear) Comfort seat with lumbar support and seat heating All dimensions are rounded values. No warranty is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 43

Condition: used, machine/vehicle number: H2X386V12010, Year of construction: 2019, operating hours: 14,594 h, load capacity: 1,600 kg, lifting height: 3,145 mm, mast type: duplex, overall weight: 3,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,145 mm Load capacity: 1,600 kg MACHINE DETAILS Mast design: Duplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery idle voltage: 51.13 V Service valid until: 10/2027 UVV (Occupational Safety) valid until: 10/2027 Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,200 kg Operating hours: 14,594 h EQUIPMENT Former Linde full-service unit EVO facelift model Color display Tilt angle display Side shifter Semi-cab Windshield with windshield wiper Roof window LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating High-quality charger, year of manufacture 2026 Additional hydraulics: 3rd valve Additional hydraulics: 4th additional valve for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Chjdpez S Ntajfx Afxjd Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 188

Condition: used, machine/vehicle number: W41190V00204, Year of construction: 2019, operating hours: 2,919 h, load capacity: 5,000 kg, overall weight: 1,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Cjdpfsz S Nudjx Afxohd TECHNICAL DETAILS Rated pulling force: 5,000 kg MACHINE DETAILS Battery voltage: 24 V Battery capacity: 500 Ah Battery year of manufacture: 2019 Battery voltage in idle state: 25.0 V Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,400 mm Dead weight: 1,000 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,919 h EQUIPMENT Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 372

Condition: new, operation weight: 790 kg, Year of construction: 2026, Aebi Schmidt Vario snowplow KL-V 28 Storage plow - NEW Year of manufacture: 2026 Csdps Aa Rt Ajfx Afxohd Net price: 14,200 EUR Gross price: 16,898 EUR Equipment: Basic plow 1209080 Vario snowplow KL-V 28 133400 Paint finish: Standard RAL 2011 Scraper blades 195125 Scraper blade combination 36 Mounting 122202 Adapter group for mounting plate size 5 223401 Snowplow with lifting device Hydraulics 122322 Lifting/lowering/angling with comfort hydraulics + solenoid valve 24V 194104 Separate return line for an electrical solenoid valve 122403 Hydraulic couplings, flat-sealing - ISO 16028 (S) (size 12 / BG3) – 2 cells 194301 Hydraulic coupling for return line - flat-sealing - ISO 16028 (M) Operational support 122522 Sliding plate 121911 Curb deflector (set) 121615 Rubber splash guard Warning markings 122701 Warning marking red/white 122906 Warning flags (with plastic handle) and holder (set) Lighting 123013 Plow lighting/marker lights LED - Professional (7-pin connector) Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee. Our General Terms and Conditions apply. Location: Ahlborn GmbH Commercial Vehicles Hafenstraße 18 31137 Hildesheim Inspections and/or test drives only by prior appointment. Please coordinate by phone before arrival, as the vehicle/device may not be at the specified location. Contact person: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Codpfxeytx Uro Afxjhd Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm strip thickness: 1,5 mm Chodpfxebif E Ee Afxod

Condition: ready for operation (used), Year of construction: 2015, operating hours: 945 h, functionality: fully functional, machine/vehicle number: UHM3500A015C25764, power: 36.3 kW (49.35 HP), first registration: 09/2015, overall weight: 1,900 kg, fuel type: diesel, maximum load weight: 3,500 kg, empty load weight: 1,800 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: automatic, Equipment: air conditioning, car registration, Nilfisk City Ranger 3500 – only 940 operating hours – sweeping and vacuuming technology, winter service equipment, and high-pressure cleaner For sale is a fully functional Nilfisk City Ranger 3500, built in 2015, with only 940 operating hours. Thanks to its sweeping and vacuuming unit, winter service equipment, and integrated high-pressure cleaner, the machine can be used in a variety of ways throughout the year – ideal for municipalities, caretaker services, and the maintenance of commercial and industrial areas. Sweeping and vacuuming operation The front sweeping brushes direct dirt and debris to the suction nozzle. The material is then drawn in via the suction system and transported to the debris container. Water spraying supports dust control during sweeping. The machine is suitable for cleaning paved roads, paths, parking lots, and industrial areas, as well as for collecting leaves, sand, gravel, and general street litter. Quickly ready for winter service With a few modifications, the City Ranger can be converted from sweeping and vacuuming mode to winter service mode. The included sweeping roller enables the removal of loose snow on paved surfaces. The Fiedler roller spreader, also included, can be used to spread de-icing salt. This means the machine can handle both snow removal and spreading tasks. Integrated high-pressure cleaner A high-pressure cleaner is permanently installed in the machine. It can be used to clean the machine itself, for example, when dirt accumulates during sweeping, as well as for cleaning other objects and surfaces. New inspection, fresh oil change, and new tires In October 2026, the main inspection (HU/TÜV) and the oil change were carried out. At the same time, the tires were also replaced. Vehicle data and scope of delivery Year of manufacture: 2015 Operating hours: only 945 Condition: fully functional HU/TÜV: new, October 2026 Oil change: October 2026 Tires: replaced in October 2026 Sweeping and vacuuming unit including front sweeping brushes and debris container Sweeping roller for winter service Fiedler salt spreader Codpfx Afjz S U Txjxshd Permanently installed high-pressure cleaner VAT can be shown separately The attachments shown in the photos are included in the offer and in the selling price. Inspection and functional demonstration possible by arrangement.

Condition: refurbished (used), Year of construction: 2011, operating hours: 8,235 h, load capacity: 2,500 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 790 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. Csdpfx Aez Ikdqofxehd * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: Low lift pallet truck ERE 225 Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2011 Operating hours: 8,235 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 790 kg Load center: 600 mm Tires: Polyurethane Model type: ERE 225 Battery type: PzS Voltage: 24 V Battery weight: 298 kg