Used Setup for sale (928)

Condition: excellent (used), Manufacturer: REHM Kedpfx Abjv Nrfxscsdi Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1537001259A, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,700 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 560 mm, table length: 790 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, spindle torque (max.): 83 Nm, Equipment: documentation/manual, DMG MORI ECOMILL 635 V CNC Vertical Machining Center Kdodpfx Aoyrfv Hsbcoi - Connection: 17 kVA - Setup speed in X/Y/Z: 20 - 2000 mm/min - Travel measuring system X/Y/Z: 1 µ - Positioning uncertainty X/Y/Z: 6 µ - Tool holder: SK 40 - Table with 5 T-slots Attention: All tool holders located in the tool changer are included in the scope of delivery! Attention: The item must be collected, bindingly, between 27.04. and 30.04.2026 on a date yet to be agreed. FCA D-45549 Sprockhövel – loaded on truck

Condition: used, Year of construction: 2004, Used Horizon VAC-60Hc Collator, used The Horizon VAC-60Hc is a powerful collator designed for efficient and reliable paper handling in professional print finishing environments. Key Features: - Loading capacity: 130 mm per bin - Modular design: Tower with 6 feed stations, expandable up to 6 towers for a total of 36 stations - Suction and air-blow technology: Uses Horizon's advanced technology for consistent and reliable sheet feeding with various paper types and weights Kdodpfx Abjxgd Szocsi - Versatile paper processing: Handles sheets from 148 x 120 mm to 500 x 350 mm, with paper weights from 40 to 250 g/m² - High production speed: Up to 9,500 sets per hour, depending on paper size and configuration - User-friendly operation: Intuitive interface for easy job setup and control - Advanced error prevention: Equipped with miss-feed, double-feed, and jam detection for improved accuracy and reliability - Job memory: Ability to store recurring jobs for increased efficiency Technical Specifications: - Dimensions: 842 x 652 x 1,961 mm - Weight: 310 kg - Power supply: 230V, 50/60Hz - 1.86kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: as good as new (ex-display), Year of construction: 2022, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display Kjdpoynf Unofx Abcedi • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Condition: like new (used), Year of construction: 2022, operating hours: 4 h, functionality: fully functional, type of input current: three-phase, total height: 960 mm, total width: 560 mm, total length: 1,040 mm, overall weight: 130 kg, warranty duration: 6 months, electrical fuse: 400 A, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. Condition: Almost NEW (used 4h) Warranty of 6 months Model: EWM Titan XQ R 400 AC puls Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100% Power supply: 3~ 400 V, 50/60 Hz Processes: MIG/MAG standard, pulse, double pulse, forceArc, rootArc, AC Arc TBI BRG-2-ES-DEA attachment for automatic cutting and nozzle cleaning. Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Cooling: Water-cooled (integrated cooling unit) Efficiency: >90% Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg Robot Interface Equipped with robotic interface (digital/analog I/O and Fieldbus options). Kodsxdncxjpfx Abcodi Compatible with major robot brands: ABB, KUKA, Fanuc, Yaskawa, Panasonic, Kawasaki, OTC. Full integration possible – process parameters controllable directly via robot controller. German quality – designed for continuous industrial use. AC/DC pulse technology for aluminium and non-ferrous metals. Large database of synergic programs for easy setup. High energy efficiency, reduced operating costs. Ready for manual welding or complete robotic integration. Mobile trolley with 4 wheels for easy handling.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm Kdsdpfxeym Sd To Abcsi - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2016, functionality: fully functional, ESC screen printing machine model 600 H/E, semi-automatic, print format max. 400 x 550 mm Precision printing machine with vertical frame lifting designed for high-quality, precise screen printing on foils, scales, circuits, panels, glass, etc. Standard equipment: - vertical frame lifting with pressure in the longitudinal direction from right to left - pneumatic drive, infinitely adjustable - hardened and ground guide shafts with ball guides - pneumatic maintenance unit Kodpfovvwbfox Abcodi - pneumatic squeegee head with fine adjustment and automatic, vertical lifting for screen changing and cleaning - flood squeegee device - individual function control for setup operation - individual cycle with operation via foot switch - automatic cycle via timer - modern, synchronized screen frame lifting - print path adjustment infinitely via limit switch - metal vacuum base plate with micrometric fine adjustment in x-y axis - central height adjustment of the Printing unit via trapezoidal thread spindles - stepless squeegee angle adjustment readable via scale - squeegee quick release fasteners - printing and flood squeegee separately adjustable via pressure regulator and readable via pressure gauge Technical data model 600 H/E: Vacuum plate: 500 x 700 mm max. printing format: 400 x 550 mm max. printing material height: 8 mm max. frame format: 600 x 850 mm micrometric fine adjustment: ± 10 mm air consumption: 11.3 I electrical connection: 110V/5A 230V/3.5A max. cycle performance: 1200 p/h Dimensions: Width: 1000 mm Depth: 800 mm Height: 1700 mm Packaging dimensions: 1000 x 880 x 1860 mm Net weight: 250 kg Gross weight: 375 kg • two printing squeegees - length according to customer specifications • two flood squeegees - length according to customer specifications Powder Machine 4050 The Powder Machine was specially developed for the easy powdering of DTF transfers. The continuously adjustable film holders allow films up to 40 x 50 cm to be processed. The thermal powder is evenly distributed on the film with one hand. Thanks to the vibration, the excess thermal powder is removed from the film. The thermal powder only sticks to the printed areas. With the Powder Machine you always achieve the optimal application of thermal powder for your transfers. Technical data: Dimensions: 79 x 42 x 64 cm Operating voltage: 230 VAC Power: 35 W Max. format: 40 x 50 cm Time setting: 0 - 3 seconds Volume: less than 70 dB (A) Net weight: 27.5 kg Shipping weight: 44 kg M&R Economax II small dryer

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. Kdodpfx Aboq Nfvuecei 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: refurbished (used), Year of construction: 2020, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, workpiece length (max.): 1,000 mm, workpiece width (max.): 700 mm, workpiece height (max.): 400 mm, year of last overhaul: 2025, GF FORM E600 Year of manufacture: 2020 – Only 2,500 eroding hours! AC FORM HMI control system Travel distances (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1000 x 700 x 400 mm Max. workpiece weight: 1000 kg Table dimensions: 800 x 600 mm Max. electrode weight: 100 kg Integrated C-axis, speed U=0-100 rpm Min./max. distance between table and chuck: 250-650 mm ISPG generator with 140 Ampere Best surface finish: Ra 0.1 µm 6-position electrode changer in magazine Operation via 17" LCD touchscreen or mouse Handheld pendant for manual machine setup Machine dimensions: 1600 x 2700 x 2858 mm Total weight: 4400 kg The machine will be cleaned, serviced, and tested by us upon receipt of order. We are pleased to optionally offer you the following: - Transport - Commissioning and training - Clamping devices - Dielectric fluid Kdedpfx Absyngvajcoi

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Kedpfeylyhdjx Abcodi Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, input voltage: 400 V, hose package length: 22,800 mm, ground cable length: 5,000 mm, sheet thickness steel (max.): 50 mm, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm, featuring automated process setup via advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable that provides trackable usage data. Technical data: Cutting performance: Recommended cutting capacity: 32 mm – 500 mm/min Kjdpfjykp R Sjx Abcjdi Maximum cutting capacity: 38 mm – 250 mm/min Severance capacity: 50 mm – 125 mm/min Pierce capacity: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm D x 6.0 mm W Scope of delivery: Power cable, H105 handheld torch 22.8 m (75°), work lead with clamp, instruction manual

Condition: excellent (used), functionality: fully functional, overall weight: 21,000 kg, lifting power: 2,500 kg/m, lifting height: 19,000 mm, tire condition: 70 %, Year of construction: 2020, Equipment: pallet forks, FB Gru fast-erecting crane, ideal for timber construction, carpenters, roofers, and master builders. Outreach: 27 m – 700 kg, 2,500 kg at approx. 9.5 m, 19 m hook height; Setup time: 30–50 minutes depending on ground conditions; 32 A power connection recommended for unrestricted operation; Transport possible by truck and tractor (equipped with fifth wheel and drawbar); Pallet fork is permanently installed and always included; Storage compartment for timber sections mounted at the rear; Remote control: 1x radio + 1x cable included; Cable remote for auxiliary steering up to the truck or tractor cabin included; Slight signs of use but fully functional and reliable; Viewing and test operation possible by appointment. Kdsdpeytchisfx Abcji

Condition: used, Year of construction: 2021, controller manufacturer: Sonstige, controller model: Professional 6, _____ Description: Kdjdpfxjymhx Ho Abcei Year of manuf. : 2021 Control : Sonstige Professional 6 Speed : 14000 rpm Movement X/Y/Z : 730/650/800 mm Tool holder : HSK-A63 Spindle: Speed:14.000 U/min Torque (max.):303 Nm Taper:HSK-A63 NC-Roundtable: B-Axis:0,0001° Palletsize:500 x 500 mm Tableloading (max.):500 kg Workpiecedimensions (max.):ø800 x 1.000 mm In general: Toolmagazine:60 Stations Rapid travers in X/Y/Z:60 m/min Ausstattung/Zubehör: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfitler and High-pressure, 70 bar Automation:Palletchanger, 2 Stations Workpiececlamping:Hydraulic, 6+3 Contactcontrol:Penumatic Oilmistseparation:Mechanical extraction, SARA UC1 SD III Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Ksdjyf E Tfepfx Abcjdi Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 51 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 11.5 kW (15.64 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 3 mm, working length: 3,000 mm, Equipment: documentation/manual, 51x3mm NC Type Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Ksdpfx Abjvwg Evscodi Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 4 mm, working length: 3,000 mm, Equipment: documentation/manual, 76x4mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Kdodpfjvwg D Sox Abcji Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 99 mm/s, pressure: 130 bar, wall thickness: 2 mm, working length: 1,920 mm, Equipment: documentation/manual, 32x2mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are B, BR, BRF. B series makes bending operation automatically. BR series makes bending and rotating operation automatically. BRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for BR and BRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems. Kdjdpovx D D Sefx Abcji

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Kjdovwg Hmspfx Abcedi Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: excellent (used), – Mitutoyo dial test indicator, model 513 454 – accuracy 0.01 mm – lever type (test indicator) – antimagnetic version – Made in Japan Kedpfx Asw Rdi Ajbcsdi – Mitutoyo magnetic base – model 7011SN – ON/OFF lock – robust, stable, with precise clamping mechanism – Made in Brazil – The set is fully functional. Stable guidance and precise readings. – Ideal for tool setup, run-out checking, and inspection measurements.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with a Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw measuring arm for manual tool measurement • Ball screw with enhanced precision, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for particularly large workpieces • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tool capability • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency stop impact switch greatly simplifies program setup • Belt-style chip conveyor • Worklight for complete illumination of the work area • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic turret head VDI 40 • All 12 turret stations powered by an integrated motor capable of speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree inclination • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with the door open • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant detection and machining • ShopMill step programming • Manage network drives • 3D simulation • Remote view/assistance SIEMENS OSS Plus Additional Package • 12 months; Item no. 3589020 • 24 months; Item no. 3589021 • 36 months; Item no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (factory option) Angular accuracy: 51 '' Repeatability: 20 '' Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed Range Speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle nose: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle taper: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical Spindle Kedpfx Asymk Uksbcedi Drive motor power S1 continuous duty: 11 kW Drive motor power S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30%: 140 Nm Feed Force Feed force, X-axis: 8.4 kN Feed force, Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN 5480 Number of tool stations: 12 Drive motor power: 4.82 kW Max. permissible speed at tool coupling: 6000 rpm Max. tool torque: 20 Nm

Condition: used, mileage: 80,000 km, power: 103 kW (140.04 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,204 mm, total width: 2,098 mm, total height: 2,312 mm, loading space length: 3,550 mm, loading space width: 2,050 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 8318 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available. Largest selection - Best price. More than 1,000 satisfied customers per year - Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----1. Owner, German vehicle, non-smoking vehicle Completely serviced only by Volkswagen New brakes front and rear Kdodewc Hztopfx Abcei New all-weather tires rear Automatic transmission Body: Trunk Massage seat for driver ---- Optional equipment: * Storage package 2 * Storage compartments: 2 DIN slots at the front under the headliner * Interior lights in the driver's cab: reading light at the front * Discover Media audio navigation system (touchscreen color display) * Voice control system * Bluetooth mobile phone interface * USB multimedia interface (iPhone/iPod) with AUX-IN * Volkswagen Media Control and App Connect * Lockable glove compartment * Light + Sight equipment package * Driving assistance system: High beam control (Light Assist) * Rain sensor * Automatic headlight control * Light assist (Coming Home, Leaving Home) * Driving assistance package 2 * Driving assistance system: Area monitoring system (Front Assist) with City Emergency Braking * Driver assistance system: City emergency braking function * Driver assistance system: Adaptive Cruise Control with vehicle stop function (ACC including follow-to-stop) * Driver assistance system: Drowsiness detection sensor * Multifunction steering wheel * Driver assistance system: Lane assist * Driver/passenger airbag, passenger airbag can be deactivated * Electric exterior mirrors Adjustable and heated * Onboard tools and jack * Chassis: Reinforced damping and stabilizers, front and rear * Heated windshield * Folding remote control keys (2) * Driver's cab floor mats: Rubber * Climatic air conditioning (driver's cab) * Position lights (roof) * Spare tire in standard tires * Rear view camera setup * Driver's cab seats: Double passenger seat with storage compartment * Driver's cab seats: Heated driver and passenger seats * Driver's cab seats: ErgoActive suspension seat, driver's side (20-way seat adjustment, massage function) * Rear underbody protection * 3rd brake light setup * Reinforced front axle * Seat belt warning system (driver/passenger side) * Auxiliary heating (air) Standard equipment: Anti-lock braking system (ABS), Drive type: Front-wheel drive, Convex exterior mirror, left, Convex exterior mirror, right, LED indicators integrated in exterior mirrors, floor covering in driver's cab: rubber, dual headlights, Electronic Stability Program (ESP), driver assistance system: Hill Start Assist, driver assistance system: Brake Assist (HBA), electric front windows, automatic transmission (8-speed), grab handles on A-pillars, interior lights in driver's cab: LED, body/structure: flatbed, fuel tank: 75 liters, radiator grille with chrome strip on top, adjustable steering column (steering wheel), headlight range control, truck registration, side marker lights, engine 2.0 liters - 103 kW TDI, multifunction display Plus, rear fog light, wheelbase 3640 mm, particulate filter, low emissions according to Euro 6 emissions standard, SCR system (AdBlue technology), electro-mechanical power steering, seat cover/upholstery: fabric, engine start/stop system, front bumper in gray with cover in body color, daytime running lights, white

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 Kedpfeymkdxex Abcsdi • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life. • Machine base constructed from cast iron for high rigidity • Carousel-type tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier • Coolant system with 70-liter coolant tank • Tool change performed automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, high-precision milling table – large dimensions and precision ground finish • Generously dimensioned access doors minimize cleaning and maintenance time • LED machine light for complete illumination of the working area SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front USB port (IP65) • Serial RS232C interface • RJ45 Ethernet on rear panel User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process reliability: • LED tool number display • MCP with rotary switch for feed and spindle override Complete package: • RJ45 Ethernet port • Prepared for remote maintenance • AST function; allows simple optimization for enhanced dynamic and accuracy requirements • Absolute encoder / no reference run necessary • Higher precision Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid traverse speed X axis: 20 m/min Y axis: 20 m/min Z axis: 20 m/min Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 12 kVA Horizontal Milling Table Length: 800 mm Width: 260 mm Distance vertical spindle – table, min.: 100 mm Distance vertical spindle – table, max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 Kodpfxoymkcus Abcsdi T-slot spacing: 50 mm Maximum load capacity: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant/Lubricant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel X axis (automatic): 450 mm Y axis (automatic): 260 mm Z axis (automatic): 450 mm Max. spindle–column distance: 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation Drive motor power S1 (continuous duty): 3.7 kW Drive motor power S6-30% duty cycle: 5.5 kW Drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X axis S1: 6 Nm Y axis S1: 6 Nm Z axis S1: 11 Nm Tool Changer Design: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection Kdsdsymkbdopfx Abcji • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: as good as new (ex-display), Year of construction: 2025, Machine is on display. Optimill F 200 HSC Premium CNC milling machine directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control system features high performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile rail guideways with roller bearings for high rapid traverse rates on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precision-ground milling table with five T-slots, large dimensions · The portable electronic handwheel with enabling button and emergency stop switch greatly simplifies program setup · Coolant system with chip flushing and cleaning gun · Internal spindle coolant with 20 bar pressure · Belt-type chip conveyor for efficient chip removal · Chip trolley · RJ45 connection socket and 230 V power supply · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dust particles · Work area machine light · Additional SIEMENS warranty package for material defects and free online/on-site service OSS Plus · 1 year Basic maintenance contract included in D/A/CH region Milling spindle: inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Drive motor torque S1 operation: 50 Nm Drive motor S6-30% duty cycle: 26.4 kW Drive motor torque S6-30% duty cycle: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system Coolant pump power, 3 units: 1 kW Delivery rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Kodoymd Hmepfx Abcsdi Type: Double-arm gripper Number of tool stations: 24 Maximum tool diameter: 78 mm Maximum tool diameter (adjacent stations free): 120 mm Tool length: 300 mm Maximum tool weight: 8 kg Tool change time: tool-to-tool 2.5 seconds Travel X axis: 850 mm Y axis: 500 mm Z axis: 550 mm Feed drive Rapid traverse X, Y, Z axes: 48 m/min Drive torque motor X/Y/Z axes: 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axes: 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6–8 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–650 mm Table (L x W): 1,000 x 500 mm T-slot size/number/spacing: 18 mm / 5 / 100 mm Max. load: 500 kg Dimensions L x W x H: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg !!! Image shows optional setup with 3D printer, not included in the price !!!