Used Short Screwdriver for sale (3,897)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014, Machine no. JD12 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 – 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) >> Input of feed rates and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Thread cutting possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1,400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Features: >> Weiler digital readout >> Collet chuck (new), collet set NEW from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> 160 mm 4-jaw chuck with 2 sets of jaws >> Multifix size B quick change toolpost with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram Safety Features: Rsdpfx Aeydczdsazjn >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Digital Readout: >> 8 inch color display >> 3 axes for bed, cross, and compound slides >> 99-tool memory >> Spindle orientation stop >> Input of either constant speed or cutting speed >> Feed and threading settings are displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2014, in very good condition with original paint. The machine is, of course, fully functional and equipped with new collets and chucks. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, spindle speed (max.): 3,800 rpm, travel distance Y-axis: 160 mm, controller manufacturer: OKUMA, controller model: OSP-P300SA, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Additional equipment Redpfxox D Hlls Aazen • HI-Cut Pro high-speed control Machine Benefits Qualitative Machine Benefits • Enlarged main spindle • Counter spindle with c-axis on w-axis: rapid traverse: 20m/min max: 5000 1/min torque: 328nm spindle nose: kk size 6 spindle bore diameter: 62mm hollow clamping cylinder and three-jaw chuck diameter: 254mm bore in drawtube: 52mm diameter Technical Machine Benefits • 8 short tapers • Front bearing diameter: 120mm • Boring diameter: 80mm • Torque: 412 nm • Helical interpolation • 10 workpiece zero points • Tool spindle and c-axis: 0. 001° for main spindle • Ikz: 20 bar • Hsk a 63 • Electr. Spindle orientation: +/- 0. 1° Extra Information New spindle in August 2024 Technical Specification Taper Size HSK 63

Condition: good (used), mileage: 5,82,885 km, power: 152 kW (206.66 HP), first registration: 05/2019, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,150 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 9,250 mm, total width: 2,550 mm, total height: 3,580 mm, loading space length: 7,160 mm, loading space width: 2,480 mm, loading space height: 2,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,134 kg, Gross weight: 11,990 kg, Total fuel tank capacity: 250 liters, Fifth wheel: Fixed, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: Yellow, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Bluetooth, Engine power: 152 kW (204 hp), Fuel type: Diesel, Emissions standard: Euro 6, Transmission: AS-Tronic, Gearbox: ZF, Gears: 6, Power steering, ABS, ASR, Starter battery, System type: ., Central locking, Seat configuration: 1+2, Upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: Rear gate, Tail lift capacity: 2,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift dimensions: 175x252 cm = Further Specifications = Transmission Gearbox: ZF, 6 gears, automatic Axle configuration Rjdpfsyf Alfex Aazjn Tyre size: 285/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tyre tread left: 6 mm; Tyre tread right: 6 mm; Suspension: leaf suspension Axle 2: Twin tyres; Tyre tread inner left: 5 mm; outer left: 6 mm; inner right: 5 mm; outer right: 7 mm; Suspension: air suspension Weights Curb weight: 7,134 kg Payload: 4,856 kg Gross vehicle weight: 11,990 kg Functional Tail lift: Dhollandia, rear gate, 2,000 kg Loading platform height: 109 cm Maintenance APK (technical inspection): valid until 05/2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €371 per month (default, 60 months); please inquire for further information and conditions. Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price classes. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • Competitive prices • Fair and professional business practices • Multilingual support • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Expert technical services • Guaranteed recognizable quality • And more.... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty packages.

Condition: good (used), mileage: 4,65,664 km, power: 213 kW (289.60 HP), first registration: 01/2021, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,250 mm, total width: 2,550 mm, total height: 3,730 mm, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (recording device) - Fixed (installed) - Short cab - Tail lift = Remarks = Number of axles: 2, configuration: 4x2, unladen weight: 8,124 kg, gross weight: 19,000 kg, total fuel capacity: 230 liters, fifth wheel: fixed, suspension type: air suspension, cab type: short cab, cruise control, tachograph (recording device), digital tachograph, air conditioning, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, reversing camera, lighting type: halogen lamp, lane departure warning system, climate control, seat heating, Bluetooth, engine power: 213 kW (286 Hp), fuel: diesel, Euro 6, transmission type: AS-Tronic, transmission make: ZF, gears: 12, power steering, ABS, ASR, starter battery, central locking, seating: 1+1, seat cover: fabric, seat adjustment: manual, tail lift, tail lift type: rear platform, tail lift capacity: 1,500 kg, tail lift manufacturer: Dhollandia DHLM.20, tail lift material: steel, tail lift size: 200 x 250 = Further Information = Transmission Transmission: ZF, 12-speed, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: disc brakes Axle 1: steering; left tire tread: 7 mm; right tire tread: 7 mm; suspension: leaf spring Axle 2: dual tires; left inner tire tread: 9 mm; left outer: 9 mm; right inner: 9 mm; right outer: 8 mm; suspension: air suspension Weights Unladen weight: 8,124 kg Payload: 10,876 kg gross vehicle weight: 19,000 kg Functional Tail lift: Dhollandia DHLM.20, rear platform, 1,500 kg Loading platform height: 120 cm Rjdpfx Asyf Akuoazjn Maintenance MOT (main technical inspection): valid until 01/2027 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Lease price: €769 per month (default, 60 months); Contact us for further details and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price segments. Why should you buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Competitive pricing • Trustworthy business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 4,44,631 km, power: 194 kW (263.77 HP), first registration: 06/2019, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 8,100 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 6,120 mm, loading space width: 2,450 mm, loading space height: 2,430 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, - Digital tachograph - Tachograph (control device) - Fixed - Short cab - Tail lift Number of axles: 2, configuration: 4x2, payload: 4,825 kg, unladen weight: 7,165 kg, gross weight: 11,990 kg, total fuel capacity: 340 liters, fifth wheel coupling: fixed, suspension type: air suspension, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, GPS navigation, color: multicolor, heated mirrors, reversing camera, lighting type: halogen lamp, lane assist, Bluetooth, engine output: 194 kW (260 Hp), fuel: diesel, Euro: 6, transmission type: AS-Tronic, gearbox: ZF, gears: 6, power steering, ABS, ASR, starter battery, central locking, seats: 2, seating configuration: 1+1, upholstery: fabric, seat adjustment: manual, tail lift, tail lift design: rear flap, tail lift capacity: 2,000 kg, tail lift manufacturer: Dhollandia DHLM.30, tail lift material: steel, tail lift size: 200 x 250, SHORT ALU BOX / 2 TONS TAIL LIFT / MOOIE SCHEVERS SCHALKWIJK ALU BODY / 1ST OWNER / 16T TECHNICAL Transmission Gearbox: ZF, 6-speed, automatic Axle configuration Tyre size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; left tyre tread: 3 mm; right tyre tread: 4 mm; suspension: leaf suspension Axle 2: twin wheels; left inner tyre tread: 10 mm; left outer: 10 mm; right inner: 10 mm; right outer: 11 mm; suspension: air suspension Weights Unladen weight: 7,165 kg Payload: 4,825 kg gross weight: 11,990 kg Functional Tail lift: Dhollandia DHLM.30, rear flap, 2,000 kg Loading platform height: 113 cm Maintenance APK (Technical inspection): valid until 06/2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Lease price: €643 per month (default, 60 months); Please ask for additional information and terms Identification Registration number: 79-BNL-5 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands across all model years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Honest dealings • We speak many languages • We understand our customers • Import and transport assistance • (Export) registration plates quickly arranged • Expert technical services Redpfx Aoyf Aknjazsn • The assurance of “recognized quality” • And more… Please visit our website for special offers and the complete stocklist: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rates and submit an application through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 1,68,055 km, power: 217 kW (295.04 HP), first registration: 01/2022, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 9,400 mm, total width: 2,550 mm, total height: 3,770 mm, loading space length: 7,260 mm, loading space width: 2,480 mm, loading space height: 2,480 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional options and equipment = - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Short cab - Tail lift = Remarks = Number of axles: 2, configuration: 4x2, unladen weight: 6,640 kg, gross weight: 16,000 kg, total tank capacity: 200 liters, fifth wheel: fixed, suspension type: air suspension, type of cab: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, color: white, heated mirrors, lighting type: halogen lamp, lane departure warning system, Bluetooth, engine power: 217 kW (291 Hp), fuel: diesel, Euro: 6, transmission type: AS-Tronic, gear manufacturer: ZF, gears: 12, power steering, ABS, ASR, starter battery, sliding roof, central locking, seating arrangement: 1+1, seat upholstery: fabric, manual seat adjustment, tail lift, tail lift type: rear flap, tail lift capacity: 1,500 kg, tail lift manufacturer: Dhollandia DHLM.15, tail lift material: aluminium, tail lift dimensions: 180 x 252 cm = Further information = Transmission Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 285/70R19.5 Brakes: disc brakes Axle 1: steering; left tyre tread: 10 mm; right tyre tread: 4 mm; suspension: leaf spring Axle 2: twin tyres; left inner tread: 13 mm; left outer tread: 14 mm; right inner tread: 13 mm; right outer tread: 13 mm; suspension: air suspension Rodpfeyf Ai Djx Aazen Weights Unladen weight: 6,640 kg Payload: 9,360 kg Gross Vehicle Weight (GVW): 16,000 kg Functional Tail lift: Dhollandia DHLM.15, rear flap, 1,500 kg Loading height: 112 cm Sliding roof: yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Lease price: €825 per month (default, 60 months); Please ask for further information and terms Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy from Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognisable quality • Good prices • Professional dealings • Multilingual service • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of “recognisable quality” • And much more.... Please visit our website for special offers and full inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send an enquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 3,86,204 km, power: 177 kW (240.65 HP), first registration: 04/2008, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 6,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro4, suspension: steel-air, total length: 10,150 mm, total width: 2,550 mm, total height: 3,660 mm, loading space length: 7,680 mm, loading space width: 2,460 mm, loading space height: 2,380 mm, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, tail-lift, traction control, = Further options and accessories = Rodpfexk D T Hsx Aazen - Digital tachograph - Tachograph (control unit) - Fixed - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Curb weight: 8,424 kg, Gross weight: 18,000 kg, Total tank capacity: 280 liters, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamps, Heated seats, Engine output: 177 kW (237 hp), Fuel: Diesel, Euro: 4, Transmission type: Manual, Gearbox manufacturer: Volvo, Number of gears: 6, Clutch pedal, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: Rear platform, Tail lift capacity: 2,000 kg, Tail lift manufacturer: Dhollandia DHLSU11, Tail lift material: Steel, Tail lift dimensions: 200 x 250 = Further information = Transmission Transmission: VOL, 6-speed manual gearbox Axle configuration Tire size: 295/80R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire tread: 2 mm; Right tire tread: 5 mm; Suspension: Leaf spring Axle 2: Twin tires; Left inner tread: 16 mm; Left outer tread: 17 mm; Right inner tread: 11 mm; Right outer tread: 17 mm; Suspension: Air suspension Weights Unladen weight: 8,424 kg Payload: 9,576 kg Gross vehicle weight: 18,000 kg Functional Tail lift: Dhollandia DHLSU11, rear platform, 2,000 kg Loading platform height: 107 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Good price • Honest trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more… Please visit our website for special offers and the complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask us directly about our European warranty package.

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Rodpfx Aajyc Eq Eozon

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany Rjdsvuw R Repfx Aazen The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. Rsdpfxjxt Dmxs Aazon • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Redpfxeycpwvo Aazen Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Redpfx Aasu Thpnozon Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: Rodpfx Aaou Tg I Dszsn The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Rodpfx Aaewzabqjzen Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) Redpfxswzaiue Aazjn We are happy to answer further questions for you by phone.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Rodju Thh Espfx Aazen Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) Rodpoxw Uyqjfx Aazjn EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: good (used), mileage: 3,52,900 km, power: 188 kW (255.61 HP), first registration: 01/2018, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 10,000 mm, total width: 2,550 mm, total height: 3,750 mm, loading space length: 7,800 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, Year of construction: 2018, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional options and accessories = - Digital tachograph - Tachograph (control device) - Fixed - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 6,680 kg, Curb weight: 7,620 kg, Gross weight: 14,300 kg, Total tank capacity: 200 liters, Fifth wheel: fixed, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: blue, Heated mirrors, Rear view camera, Lighting type: halogen lamp, Lane assist, Seat heating, Bluetooth, Engine power: 188 kW (252 hp), Fuel: diesel, Euro: 6, Transmission type: Optidriver, Transmission brand: Volvo, Gears: 6, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 3, Seating configuration: 1+2, Seat upholstery: fabric, Seat adjustment: manual, Tail lift, Tail lift type: rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: DHOLLANDIA DHLM.30, Tail lift material: aluminum, Tail lift size: 200 x 252, NL MOT TAILLIFT / SIDE DOOR / CARGO LOCK = Further information = Transmission Transmission: VOL, 6 gears, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; Tire tread left: 5 mm; Tire tread right: 6 mm; Suspension: leaf spring Axle 2: twin tires; Inner left tire tread: 4 mm; Outer left tire tread: 4 mm; Inner right tire tread: 5 mm; Outer right tire tread: 4 mm; Suspension: air suspension Weights Curb weight: 7,620 kg Payload: 6,680 kg Gross vehicle weight: 14,300 kg Functional Tail lift: DHOLLANDIA DHLM.30, rear flap, 1,500 kg Load platform height: 101 cm Maintenance MOT (general inspection): valid until 01.2027 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Identification Registration number: 30-BKJ-4 = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Professional business conduct • Multilingual sales team • We understand our customers • Assistance with import and transport • (Export) registration swiftly arranged Rodpfxsyfmfis Aazen • Expert technical services • The security of “recognizable quality” • And more… Visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty packages.

Condition: good (used), mileage: 3,59,998 km, power: 175 kW (237.93 HP), first registration: 12/2018, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 9,520 mm, total width: 2,550 mm, total height: 3,820 mm, loading space length: 7,310 mm, loading space width: 2,460 mm, loading space height: 2,480 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Short cab - Tail lift = Notes = Number of axles: 2, configuration: 4x2, curb weight: 7,200 kg, gross weight: 15,000 kg, total fuel tank capacity: 200 liters, fifth wheel: fixed, suspension type: air suspension, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, auxiliary heater, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, reverse camera, lighting type: halogen, lane departure warning system, seat heating, Bluetooth, engine power: 175 kW (235 hp), fuel: diesel, Euro: 6, transmission type: Telligent, transmission make: Mercedes Benz, gears: 6, power steering, ABS, ASR, starter battery, system type: ., central locking, seat configuration: 1+1, seat cover: fabric, seat adjustment: manual, tail lift, tail lift version: rear flap, tail lift capacity: 1,500 kg, tail lift manufacturer: Palfinger, tail lift material: aluminum, tail lift dimensions: 180x252 = Further Information = Transmission Gearbox: MB, 6-speed, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; left tire tread: 10 mm; right tire tread: 10 mm; suspension: leaf spring Axle 2: twin wheels; left inside tire tread: 9 mm; left outside tire tread: 6 mm; right inside tire tread: 8 mm; right outside tire tread: 7 mm; suspension: air suspension Weights Curb weight: 7,200 kg Payload: 7,800 kg gross vehicle weight: 15,000 kg Functional Tail lift: Palfinger, rear flap, 1,500 kg Loading platform height: 114 cm Maintenance APK (Technical Inspection): valid until 09/2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 3 Financial Information Leasing price: €551 per month (default, 60 months); Please inquire for more information and terms Redpfx Asyfmdlsazsn Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands from all years and price ranges. Why buy at Kleyn Trucks? It’s simple! • Large, rapidly changing selection • Recognizable quality • Competitive prices • Reliable, professional trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send your inquiry via our website. Ask us directly about our European warranty package.

Condition: good (used), mileage: 5,34,712 km, power: 206 kW (280.08 HP), first registration: 06/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 11,350 mm, total width: 2,600 mm, total height: 3,500 mm, loading space length: 9,000 mm, loading space width: 2,520 mm, loading space height: 2,090 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, tail-lift, traction control, - Digital tachograph - Tachograph (control device) - Fixed - Short cab - Tail lift - Central lubrication Number of axles: 3, Configuration: 6x2, Curb weight: 11,595 kg, Gross weight: 26,000 kg, Total fuel tank capacity: 300 liters, Fifth wheel: Fixed, Number of locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Red, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Lane departure warning, Climate control, Seat heating, Bluetooth, Engine output: 206 kW (276 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox model: Scania, Gears: 12, Clutch pedal, Power steering, ABS, ASR, Starter battery, Central locking, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Mitsubishi, Refrigeration unit model: TDJS70DZA, Refrigeration unit: electric, Operating hours / electric: 4,809, Heating, Wall thickness: 40 mm, Cooling type: Chilling and freezing, Day/night cooling: Day cooling, Tail lift, Tail lift version: tailgate, Tail lift capacity: 2,500 kg, Tail lift manufacturer: DHOLLANDIA DHLM.30, Tail lift material: Aluminum, Tail lift size: 215 x 252 Transmission Transmission: SCA, 12-speed, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tyre tread left: 9 mm; Tyre tread right: 10 mm Axle 2: Twin tyres; Tyre tread left inner: 17 mm; Tyre tread left outer: 17 mm; Tyre tread right inner: 17 mm; Tyre tread right outer: 17 mm Axle 3: Lift axle; Steered; Tyre tread left: 9 mm; Tyre tread right: 9 mm Weights Unladen weight: 11,595 kg Payload: 14,405 kg GVW: 26,000 kg Functional Tail lift: DHOLLANDIA DHLM.30, Tailgate, 2,500 kg Loading platform height: 125 cm Refrigeration unit: electric (4,809 operating hours) Wall thickness: 40 mm Condition Technical condition: Good Redpsyfmcnjfx Aazen Visual condition: Good Damages: None Number of keys: 2 Financial information Leasing rate: €606 per month (default, 60 months); Please inquire for more information and conditions Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Expert technical services • The assurance of “recognizable quality” • And more… Please visit our website for special offers and complete stock: Leasing via Kleyn Trucks is...

Condition: good (used), mileage: 6,94,990 km, power: 182 kW (247.45 HP), first registration: 04/2013, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 10,150 mm, total width: 2,550 mm, total height: 3,880 mm, loading space length: 7,950 mm, loading space width: 2,440 mm, loading space height: 2,620 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (control unit) - Short cab - Tail lift = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,936 kg, Gross weight: 17,600 kg, Total fuel tank capacity: 400 liters, Suspension type: Air suspension, Cab type: Short cab, Tachograph (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Grey, Heated mirrors, Lighting type: Halogen lamp, Engine power: 182 kW (244 HP), Fuel: Diesel, Euro: 5, Gearbox: AS-Tronic, Transmission type: ZF, Gears: 6, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear platform, Tail lift capacity: 2,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 268 x 252 = Further Information = Transmission: Transmission: ZF, 6-speed, Automatic Axle Configuration: Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steerable; Left tire tread: 9 mm; Right tire tread: 10 mm; Suspension: Leaf spring Axle 2: Twin tires; Left inner tire tread: 14 mm; Left outer tire tread: 14 mm; Right inner tire tread: 18 mm; Right outer tire tread: 18 mm; Suspension: Air suspension Weights: Unladen weight: 8,936 kg Payload: 8,664 kg Gross vehicle weight: 17,600 kg Functionality: Tail lift: Dhollandia, rear platform, 2,000 kg Loading platform height: 106 cm Condition: Technical condition: good Redpfxoyfmb Ds Aazon Visual condition: good Damages: none Number of keys: 3 Identification: Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, manufacturing years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive prices • Reliable service • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registrations arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more... Visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and submit a request via our website. Ask us directly about our European warranty package.

Condition: good (used), mileage: 5,98,595 km, power: 213 kW (289.60 HP), first registration: 11/2018, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,320 mm, total width: 2,550 mm, total height: 3,920 mm, loading space length: 7,050 mm, loading space width: 2,470 mm, loading space height: 2,590 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Equipment = - Digital tachograph - Recording device (tachograph control unit) - Fixed (configuration) - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,040 kg, Gross weight: 18,000 kg, Total tank capacity: 150 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Full air suspension, Cab type: Short cab, Cruise control, Recording device (tachograph control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: Yellow, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Bluetooth, Engine power: 213 kW (286 Hp), Fuel: Diesel, Euro: 6, Gearbox type: AS-Tronic, Transmission manufacturer: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, System type: ., Central locking, Seat configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: Rear gate, Tail lift capacity: 1,500 kg, Tail lift brand: Zepro, Tail lift material: Aluminium, Tail lift size: 180x252, Spare wheel tread: 15 % = Further Information = Transmission Gearbox: ZF, 12-speed, Automatic Axle configuration Tire size: 295/80R22.5 Brakes: Disc brakes Rsdjyfmbwepfx Aazon Suspension: Air suspension Axle 1: Steered; Left tire tread: 11 mm; Right tire tread: 9 mm Axle 2: Twin tires; Left inner tread: 15 mm; Left outer tread: 15 mm; Right inner tread: 15 mm; Right outer tread: 16 mm Weights Unladen weight: 8,040 kg Payload: 9,960 kg Gross vehicle weight: 18,000 kg Functionality Tail lift: Zepro, rear gate, 1,500 kg Loading platform height: 119 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing rate: 476 € per month (default, 60 months); Please ask for further information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing selection • Recognizable quality • Great price • Sound business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Rodpfx Aasxrf Etszsn Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Rodpeu Scr Sjfx Aazjn

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Rodpfou N Snkox Aazen