Used Sink Edm for sale (727)

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Dedpfxsx Hgg Do Abxeup

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of construction: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in XY axes Linear encoders in XY axes Intelligent AT – Automatic Wire Threading For wire diameter 0.10 – 0.3 mm Automatic fine hole searching function 5 controlled axes – prepared for additional axes Dsdjxpfy Sepfx Abxoup PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä25226

Condition: good (used), Year of construction: 2009, functionality: fully functional, Table size: 600 x 400 mm Maximum workpiece size: 900 x 600 x 330 mm Maximum workpiece weight: 750 kg X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Duodpfxeyity Us Abxsp Generator output: 60 A Machine dimensions: 2190 x 1880 x 2360 mm Machine weight: 2800 kg Accessories: - Magnetic table and EROWA clamping system - Machine manual and operating instructions The machine is in very good condition and comes from a small family business that recently closed down.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: Djdpfjxx Nkyex Abxoup # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm Duodpfx Abji A I Hfexep X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm Dsdjvvl Uaopfx Abxoup X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: HU50610, Controller 15" touch screen with Windows Operation System Interface Table size 630 x 360 mm Dimension of tank LxWxH = 940 x 550 x 350 mm X travel 400 mm Y travel 300 mm Z travel 300 mm Distance between the table and chuck 100 ~ 400 mm Max weight of electrode 11/50 kgs Max weight of wpc on table 500 kgs Max Output power 50A Best surface quality of work 0,08 Ra Input power 10 kVA Dodpfx Abewktkksxoup Dielectric capacity 300 litre Dimensions of the machine LxWxH = 1320 x 1380 x 2150 mm Weight 1450 kgs Accessories, features - No. of filters 3 pcs. - C axis (max loading 11 kg) - Dielectrictank - Machine mouths - Manuals - Handtools

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Dedpfjul Uwlox Abxsup Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: excellent (used), Year of construction: 2017, operating hours: 7,700 h, X travel 600 mm Y travel 400 mm Z travel 350 mm U travel 150 mm V travel150 mm Dujdpfxexgqite Abxep Max. workpiece weight 1 000 kgs Size of working area (L × W) 1 050 × 710 mm Wire dia 0,1 ‒ 0,3 mm (optional 0,05 mm is still possible) Range of wire tension ~3 ‒ 23 N Max. wire speed cca. 420 mm / s Dimensions (L × W × H) cca.. 2 575 × 2 945 × 2 345 mm Place required (for installation) ca. ~3 860 × 4 245 mm Weight cca.4600 kgs High from floor to table surface cca. 995 mm Power required 3 Phasys, 50/60 Hz, cca. 13 kVA Tolerance: “Fine Corner Control”, “Digital PIKA-W Plus” options Visual / additional functions / controller: Smart Pulse (SPW) generator, Linearmotor (X/Y/U/V), absolut linearscales, ceramic working area, automatic wire threading (AWT), wire rotation, sparing power circles, optional Extra-taper (±45°) function, etc.

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Dusdpfx Asx D Iifsbxjp Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2020, Wire erosion / EDM Djdpfew H Aw Eox Abxsup Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 270 mm max. workpiece size X: 990 mm max. workpiece size Y: 670 mm max. workpiece size Z: 250 mm max. workpiece weight: 850 kg U / V axis: 80 x 80 mm cooling unit Max. machining current: 32 A Control unit:: LN2W

Condition: used, Year of construction: 2000, Wire erosion / EDM Duodoyk H Egspfx Abxep Travel distance X: 520 mm Travel distance Y :370 mm Travel distance Z: 310 mm max. workpiece size X: 790 mm max. workpiece size Y: 730 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg table size X: 600 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 / 120 mm generator: 45 Ampere submerged cooling unit Perfect for precise EDM applications.

Condition: used, Year of construction: 2014, Wire erosion / EDM Dodpfsyk Hy Rox Abxjup Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 310 mm max. workpiece size X: 1050 mm max. workpiece size Y: 820 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg table size X: 600 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: 200 x 200 mm submerged cooling unit C600iA/AWF/6: Transformer Daikin cooling unit Automatic front door Glass scales X, Y Spotlight Hirschmann F rotary spindle FANUC 31i-WB CNC Control

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, sink 1400 x 700 x 900 mm WxDxH 1x basin on the left, drainer on the right Dedpfx Aefffhzobxeup Pool size 600 x 500 x 300 mm with base cabinet left; right open for dishwasher incl. standpipe valve and drain plug, without siphon Stainless steel sink center NEW

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up Dodpfx Abjgzv Scsxsup AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator Dedpsv Dkvrjfx Abxjup AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: used, functionality: fully functional, jaw width: 16 mm, jaw height: 19 mm, Flat EDM vice, used Brand: Matchling Type: V1650 Length: 100 mm, Width: 100 mm, Height: 16 mm (without spindle) Dsdoymdiujpfx Abxeup Material: stainless steel Jaw width: 16 mm Clamping range: up to 48 mm Jaw height: 19 mm With downforce feature stainless in wooden case

Condition: new, functionality: fully functional, jaw width: 20 mm, jaw height: 19 mm, Flat EDM vice Brand: Matchling Type: V2075 Djdpfx Aeymdamsbxeup Length: 125 mm, Width: 100 mm, Height: 20 mm (without spindle) Material: stainless steel Jaw width: 20 mm Clamping range: up to 75 mm Jaw height: 19 mm Down-thrust feature Corrosion-resistant In wooden box

Condition: good (used), Work line incl. Meiko equipment Ideal for use in hospitals, retirement homes or sanatoriums. Everywhere where visually appealing products and good hygiene properties are required. Resistant to cold, heat, moisture and many chemicals. Wear and corrosion resistant. Features: -2 hinged doors, for quick access -1 large sink Dimensions approx. - Height 90 cm without backsplash - width 210 cm - depth 59 cm + MEIKO faeces flusher KD 40.1 Use: For cleaning of bedpans and urine bottles. -thermal disinfection -stainless steel front for easy disinfection -digital display with control panel Electrical connection: 230V / 50 Hz + MEIKO disinfection rinser Use: For rough cleaning of urine bottles and bedpans. During the rinsing process the faeces are rinsed off with a large amount of water under pressure. rinsed off under pressure. Item condition:used Duedpfxslikd Rj Abxsp

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. Duedpfeyiz T Nox Abxop The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator) ELECTRO ARC 2-DBQT FOR SPARK ERODING BROKEN DRILLS AND TAPS Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact. Duodpfx Ajymw Spebxep - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collets Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No.: 1270 Free loaded onto truck

Condition: like new (used), Year of construction: 2003, TECHNICAL SPECIFICATIONS X axis travel: 1,500 mm Y axis travel: 750 mm Z axis travel: 500 mm Worktable height: 820 mm Open height (clearance): 920 mm Maximum workpiece weight: 100,000 N Maximum load on head: 4,000 N Tank type: Fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable size: 1,700 x 1,000 mm Usable dielectric height: 620 mm GENERATOR Standard minimum surface finish: VDI = 0 Power: 60 A MACHINE EQUIPPED WITH Generator with 120 A Expert System Fixed worktable 1,700 x 1,000 mm CNC for simultaneous axis control Integrated ONA C-axis with automatic System 3R Macro Standard chuck Eco-friendly filter with automatic cleaning cycle Dielectric temperature control system Year of manufacture: 2003 MACHINE FEATURES Fixed-table structure ensuring stable operating conditions, equipped with leveling supports Stabilized grey cast iron structure (base, column, tables) X-Y-Z movements via high-precision class A ball screws, driven by three DC motors Motion on prismatic roller guideways Position detection via linear glass scales Improved front accessibility with retractable front door system Fixed working tank Integrated C-Axis (mounted on the head) Maximum speed: 40 rpm Resolution: 0.001° Maximum load (static C-axis): 500 N Maximum load (dynamic C-axis): 120 N Heidenhain encoder Toothed belt transmission Maximum current without rotation: 120 A Maximum current with high-speed rotation: 60 A Maximum current with slow rotation (0–1 rpm): 12 A Moment of inertia: 2,000 kg/cm³ Dusdpfx Ajxwma Aebxep GENERATOR FEATURES Modular design Programmable parameters Maximum power: 60 A EXPERT SYSTEM Controls the entire erosion cycle, from roughing to final surface finish, automatically adjusting spark parameters to ensure maximum generator efficiency and highest machining speed. Dedicated software for deep ribs Dedicated software for finishing large homogeneous surfaces Fully unattended machining capability with maximum productivity and excellent final quality Process parameter monitoring via screen and control panel display Automatic anti-collision system preventing electrode damage in case of accidental contact with the workpiece TECHNICAL DATA Pulse duration (Ton): continuously adjustable from 1 to 6,500 microseconds Pulse interval (Toff): continuously adjustable from 1 to 6,500 microseconds Copper electrode volumetric wear: 0.2% Graphite electrode volumetric wear: 0.1% Surface finish Ra (CLA): 0.1 micron – VDI = 0 Maximum material removal rate: 600 mm³/min Power consumption: 10.7 kVA Current intensity: adjustable from 1 to 12 (manually or via program) Highly sensitive servo control system High erosion stability

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, AGIE FUTURA V 1PM MONDO 20 STAR Year: 2000 Operating hours: approx. 10,000 h Duedpfx Abjymnrmoxep Documentation: Complete

Condition: used, Travel: 260x160x180mm Dsdpfjx Igc Usx Abxjup Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2006, Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Djdpewt N Uqjfx Abxjup More pictures and data will follow shortly.