Used Sircular Saw for sale (6,515)

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Lajdpfx Ajtwdvioabeh Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: excellent (used), Loroch Hydromat gang saw sharpener Ledpfxsnucmpo Aabeah Hydraulics Full automatic Automatic lowering of the grinding wheel after a full cycle Last cycle so called squeezing Sharpening unit tilting at an angle of 0-30 Double-sided slat with 25 and 20mm graduation

Condition: used, Year of construction: 2025, Horizontal Metal Band Saw with Swiveling Arm This horizontal metal band saw with a swiveling arm allows cutting in a plane perpendicular to the axis of the material and at any angle between 0° and 60°. The drive from the electric motor to the wheel driving the saw blade is transmitted through a mechanical gearbox (not a belt drive). The saw blade is tensioned on two cast iron wheels using a manual tensioner and guided through a set of bearing-mounted rollers. The material to be cut can be fed manually or with any mechanical feeding device, while the tool feed operates by gravity, based on oil flow in a dual-chamber hydraulic cylinder. The appropriate arm lowering speed is achieved using a valve that regulates the oil flow between the chambers. The blade guides are equipped with a set of bearing-mounted rollers, which significantly improve blade tracking, service life, straightness, cutting accuracy, and quality. The arm, featuring a rigid design, is made of profiled cast iron. A control panel is mounted on the arm. Lajdpfx Ajxqfauoabsh The base is built as a rigid welded steel sheet body. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped to form a tray for coolant drainage and chip collection during the cutting process. A cast iron worktable is mounted to the base, along with a swiveling arm and a control panel mounted on a separate arm. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed motion is the downward movement of the arm. The arm lowering speed (cutting speed) is regulated by the hydraulic cylinder. In the lower position of the arm (after the material is cut), the saw blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any cover is opened. An additional safety feature automatically switches off the saw in the event of blade breakage. Technical Specifications Blade size: 2110 x 0.9 x 20 mm Motor: S1 100%: 0.75 kW Power supply: 230V 50 Hz Blade speed: 65 m/min (50 Hz) Weight: 173 kg Packaging dimensions: 1150 x 560 x 930 mm WARNING !!! The machine is a return item. Original packaging is missing, and paint color differs from standard.

Condition: used, This MACC Special 400 G metal saw is being auctioned online in our industrial auction / machinery auction INSOLVENZAUKTION RAiN Treppenbau GmbH - machinery, transporters, tool equipment. You can find this and many other items on our platform. Lasdpfjxpcw Ijx Aabjh

Year of construction: 2007, condition: ready for operation (used), This PANHANS POLYPAN 47 F panel saw was manufactured in 2007. It features a cutting length and width of 4200 mm, main saw blade diameter of 350 mm, and a main saw motor power of 11 kW. The saw carriage offers variable feed speeds up to 80 m/min. Ideal for precise, large-scale panel dividing. Contact us for more information about this machine. Lasdpfsxpku Iox Aabjh Application Types Sawing (Wood)

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Condition: As new, machine is unused Features and technical specifications: - Saw band speed: 850 / 430 m/min - Flywheel diameter: 530 mm - Saw band length: 3,865 mm (min. 3,840 mm / max. 3,872 mm) - Saw band guides: precision guides above and below - Max. cutting height at 90°: 270 mm - Max. cutting width with fence: 474 mm - Max. cutting width without fence: 514 mm - Worktable length: 535 mm (max. 685 mm) - Worktable width: 535 mm - Worktable height: 945 mm - Worktable extension length: 535 mm - Worktable extension width: 150 mm - Worktable tilt: -10° to +45° Note: From 20° tilt, for safety reasons a clamping device or fence is required to prevent the workpiece from slipping. - Extraction port diameter: 2 × 120 mm - Output: 2.25 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Scope of delivery: - Mitre fence ±60° - Laser device for cutting line marking - Saw blade set: 1 × Saw band 3865 x 10 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 20 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 25 x 0.5 mm, 4 TPI Laodpfxjw E Tzlj Aabeh Dimensions: 1,020 × 850 × 1,982 mm Weight: 163 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Brand: SOCO MC-350 Ljdpegtmi Usfx Aabeah Suitable e.g. for cutting aluminum, brass, copper, PVC and carbon Cutting power tube at 90 °: 101.6 mm Cutting capacity profile, 90 degrees: 76.2 x 127 mm Saw blade dimensions: 355.6 mm automatic dosing length: 685.8 mm Grades: 2 Shortest cutting length (automatic): 1/4 ”6.35 mm Saw motor: 5 HP 1750 rpm Voltage: 220/3/60

Condition: used, Year of construction: 1976, Storage location: Nattheim Lodpfexc Ntcsx Aabsah

Condition: used, Year of construction: 2025, PROMOTIONAL PRICE! A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines. Product features This universal machine enables cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all vibrations. Control panel is situated close by the worm gear. Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. NEW Arm construction allows for changing the machine from horizontal into vertical with workbench in just a moment. This is not only useful for metal cutting but also as a jigsaw machine for carpentry. Technical data Cutting band size 2360×20×0.9 mm Band tension mechanical (manual) Band speeds 34, 41, 59, 98 m/min Feed speed 0-50 m/min (stepless feed) Arm lowering control stepless - hydraulic cylinder Vice base height 600 mm Power supply 230V Main motor power (kW) S1 100%: 0,75; S6 40%: 1.1 kW Weight 190 kg Laedpoxqd T Tsfx Aaboh Dimensions 1250×700×1000 mm Warranty 12/24 months User manual yes CE Declaration yes Angle 0° 180 mm 180×210 mm 180×180 mm 45° 130 mm 140×90 mm 130×130 mm WARNING!!! THE MACHINE IS RETURNED, SERVICED, NO ORIGINAL PACKAGING.

Condition: used, This DAISS + PARTNER HBA 320 SG-CNC metal bandsaw is being auctioned online in our industrial auction/machinery auction: INSOLVENCY AUCTION RAiN Treppenbau GmbH – machinery, transporters, tool equipment. Lasdpfexpcv Dex Aaboh

Condition: used, Year of construction: 2009, 0 4500 mm Working height 100 mm 0 45 Grad Dimensions (L/W/H) 5100x1000x1600 mm motor Elektromotor air pressure 6 bar Wegoma DS 110 Double Miter Saw For sale on behalf of a customer ----- In good condition, fully functional Sold only due to the cutting length being too short. Technical specifications: Cutting length (max.): 4,500 mm Cutting range: 180 mm Cutting height (max.): 100 mm Total length: 5,100 mm Total height: 1,600 mm Swivel range: 45° Input voltage: 400 V Motor type: 400 V Lodpfx Ajxpi Dzjaboah Square cutting range at 45°: 130 mm Saw blade diameter: 400 mm Total width: 1,000 mm Aluminum sheet thickness (max.): 100 mm Air pressure: 6 bar ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), CATALOGUE NUMBER 7731 - Maximum main saw blade diameter without scorer: 400 mm - Maximum main saw blade diameter with scorer: 350 mm - Cutting height with 400 mm blade: 110 mm - Electrically adjustable saw blade height and angle - Electric angle display - Arbor diameter: 30 mm - Scorer blade diameter: 120 mm - Electrically adjustable scorer height and lateral position - With sliding table - Sliding table cutting length: 2900 mm - Pressure beam: 1480 mm - Sliding table guidance on steel bars - Cutting width with rip fence: 1350 mm - With side carriage - Main motor: 5.5 kW - Scorer motor: 0.75 kW - Electric brake - 4 spindle speeds: 3000/4000/5000/6000 rpm - Electronic speed display - Extraction port diameter: 90/120 mm - Table dimensions with extension and widening: 2060 x 1410 mm - Blade guard - Machine dimensions (LxWxH): 3150 x 3650 x 1550 mm - Weight: 1155 kg ADVANTAGES – German manufacture – Electric adjustment of the saw and scorer – With scorer – Pressure beam Ljdpfx Ajxa Elpjaboah – Unpainted – Used saw in very good condition Net price: PLN 33,900 Net price: EUR 7,980 (at the exchange rate of 4.25 EUR) (Prices may fluctuate with significant currency changes)

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system Ljdpewnrf Uofx Aabsah - Locking of saw carriage: pneumatic - New exhibition machine -

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand HOLZMA Model CADmatic 4 - Professional Main Drive Main motor power 18.0 kW Additional Equipment Air cushion table with roller element 2160 x 650 mm: 4 pieces Central blower: 1 piece Laodpfsxn U Hfsx Aaboh This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Application Types Sawing (Wood)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Holtec package crosscut saw with mobile saw HF 121. Excellent condition. Located in Meschede. Can be dismantled and loaded by us. Lsdpfsxph Uxox Aaboah

Condition: good (used), Year of construction: 2003, functionality: fully functional, Specifications: Cutting speed, infinitely variable: 20 - 90 m/min Saw band: 3850 x 27 x 0.9 mm Lajdpfx Aaexn Andjbsh Cutting range: rectangular 90°: 360 x 305 mm rectangular 45°: 265 x 300 mm rectangular 30°: 175 x 300 mm

Condition: used, Year of construction: 2017, with coolant system, hydraulic clamping, infeed and outfeed roller conveyors, and one separate control/operating panel Ledjxpy Ecspfx Aabeah

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - max. blade diameter: 500 mm - spindle diameter: 30 mm - hydraulic blade stroke - max. cutting width: 500 mm - max. cutting height (in the center, with 500 mm blade): 160 mm - main motor: 4 kW - table dimensions: 715x1070 mm - table height from base: 790 mm Laodpfowtqbfex Aabjh - roller tables: 2 pcs - table dimensions: - infeed (L/W): 2000x640 mm - outfeed (L/W): 2000x640 mm - machine dimensions (L/W/H): 1400x940x1070 mm - total weight: 480 kg ADVANTAGES – 2 roller tables – hydraulic blade stroke – used saw, in very good condition Net price: 15,900 PLN Net price: 3,740 EUR at 4.25 EUR exchange rate (Prices may change with exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, rotational speed (max.): 2,800 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 650 mm Maximum cutting height: 245 mm Speed: 2,800 rpm Bore diameter: 30 mm Riving knife thickness: 5.4 mm Kerf width: 13 mm Saw blade height at 90 degrees: 245 mm Saw blade height at 45 degrees: 164 mm Saw blade height at 30 degrees: 113 mm Type of input power: Three-phase Lasdpjxpvtiofx Aabsh MACHINE DETAILS Motor power: 10 kW Motor speed: 3,000 rpm Electric saw blade tilt: 90° - 30°, with digital display Rotary table range: 30° - 150° Electrical Data Phases: 3 + N + PE Voltage: 400 V Frequency: 50 Hz Current consumption: 17 A EQUIPMENT Automatic guarding hood Pneumatic cross feed Laser for length cutting

Year of construction: 2000, condition: ready for operation (used), This SCHÜCO B 50 S was manufactured in 2000. It features saw blades of 500 mm and a maximum distance between saw heads of 6000 mm. The saw units can swivel both left and right, enhancing flexibility and precision in metal cutting. Contact us for more information. Application Types Lajdpfjxp Sqwjx Aabjh Sawing

Condition: good (used), Year of construction: 1992, functionality: fully functional, cutting height (max.): 130 mm, cutting length (max.): 400 mm, overall weight: 1,400 kg, Monitored saw blade cover; cuts at 90° profile height 130 mm and Laodpfoxnzf Uox Aabjh profile width 400 mm, at 45° = 130 x 280 mm at 30° = 130 x 195 mm. Acute angle cutting at 30° right and left. - hydraulic material clamping vertically and horizontally - hydraulic stepless saw feed - clamping pressure adjustment - original Trennjaeger stops are available. .

Condition: excellent (used), CATALOG NUMBER 7774 Ljdpfx Aasxl Dycsbeah TECHNICAL DATA - max saw blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard - pneumatic blade feed - max cutting height: 160mm - max cutting width: 585mm - main motor power: 6.2kW - dust extraction port diameter: 80, 120mm - table dimensions (L/W): 1180x800mm - table height from base: 895mm - roller tables: 2 pcs - infeed roller table with guide: 1770mm - outfeed roller table with guide: 900mm - roller table width: 585mm - overall dimensions (L/W/H): 5000x1360x1370mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original DTR documentation + CE (EU) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 19,900 PLN Net price: 4,690 EUR (based on exchange rate 4.25 EUR) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Specifications: Cutting speed, infinitely variable: 20 - 90 m/min Saw band: 3850 x 27 x 0.9 mm Cutting range: rectangular 90°: 360 x 305 mm rectangular 45°: 265 x 300 mm rectangular 30°: 175 x 300 mm Laedpfjxnv Ausx Aabsh

Condition: excellent (used), functionality: fully functional, Catalogue number 7670 TECHNICAL DATA - Track width: 340 mm - Shaft width: 400 mm - Max. blade diameter for multi-blade saw: 350 mm - Blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-blade saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm - From above: - Kickback pawls Lajdpfswrn Dnsx Aabsh - Pressure roller, metal, sliding type - Kickback pawls - Pressure roller, sliding type - Shaft with saw blades - Pressure roller, sliding type - Sliding pressure shaft, metal - From below: - Guide rail - Kickback pawls - Track - Central lubrication - Stepless feed speed adjustment - Electric raise for saw shaft 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw movement 0.55 kW - Lasers (not working, need inspection) - Extraction nozzle diameter: 210 mm - Overall dimensions (L/W/H): 2200x1450x2000 mm - Weight: 1925 kg ADVANTAGES – German production – Shaft with floating blade for edging – Additional bush for multi-blade saw included – Used multi-blade saw, in very good condition Net price: 58,900 PLN Net price: 13,870 EUR depending on the exchange rate 4.25 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Max. saw blade diameter: 500 mm - Spindle diameter: 30 mm Ljdpow Edigjfx Aabjah - Pneumatic material clamping - Pneumatic saw blade feed - Max. cutting width: 800 mm - Cutting height: 135 mm - Pneumatic controls - Main motor: 11 kW - Extraction nozzle diameter: 2x110 mm - Table dimensions: 520x1550 mm - Table height from base: 810 mm - Infeed roller table: - Dimensions (L/W/H): 2700x720x900 mm - Equipped with 3 pneumatic stops - Table equipped with guide rail - Roller diameter: 530 mm - 6 drive rollers, 1.5 kW - Outfeed roller table: - Dimensions (L/W/H): 2050x700x800 mm - Roller diameter: 590 mm - 11 idle rollers - Equipped with 3 pneumatic stops - Machine dimensions (L/W/H): 1900x1450x1600 mm - Total weight: 1500 kg ADVANTAGES – 2 roller tables – Italian manufacture – Pneumatic controls – Pneumatic saw blade feed (adjustable feed speed with knob) – Used saw in very good condition Net price: 33,900 PLN Net price: 7,976 EUR based on a rate of 4.25 EUR (Prices may change with significant currency fluctuations)