Used Spindle Motor for sale (32,663)

Condition: used, mileage: 5,50,000 km, power: 300 kW (407.89 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, emission class: euro4, total length: 8,850 mm, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, air conditioning, parking heater, Mercedes 4141 K / 8x4 HIAB articulated boom roll-off truck Original Mercedes Benz engine from 2022 / approx. €26,000 without installation!! Engine with approx. 80,000 km on it! Manual transmission, 3 pedals / clutch 8x4 drive Wheelbase 4500 mm Central lubrication system Exhaust and air intake routed upwards Large AP axles Weight variant 41 tons Large, reinforced steel spring package M-cab Air conditioning HIAB articulated boom roll-off system Adjustable underride guard Gjdpfx Aoz Nbt Esp Dskc etc.

Condition: good (used), Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in its current condition as inspected -Gearbox base: Damage, see photos -Manufacturer: Nord, Type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm -Engine: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Design: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 Gedpjilq Hisfx Ap Dokc -Dimensions: 480/185/H305 mm -Weight: 28 kg

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m Gedpfx Aeu Idxfsp Dskc TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Year of construction: 2006, condition: excellent (used), 2 movable spindles Gjdpfehh S Dxex Ap Dekc Pneumatic pressure Motors on the inverter

Year of construction: 2021, condition: new, Conversion kit for JUNG HF50, changing from Leonhardt-type control to thyristor control. On-site installation is also possible. Gksdpfxshcn Hyo Ap Dsc

Condition: good (used), electric motor, three-phase motor -Power: 1.5 kW -Speed: 1420 rpm Gkedpfx Apscxv Sio Dsc -Voltage: 220 V (internally connected in delta configuration) -Shaft: Ø 19 mm -Design: B5 -Protection class: IP 55 -Dimensions: 360/260/H200 mm -Weight: 32 kg

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm -Design: B5 -Number: 1 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg Gkodec Nlynepfx Ap Doc

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gedpjwz I Tbsfx Ap Dskc Gear ratio 1:6 Max. speed 15,000 rpm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, power: 0.55 kW (0.75 HP), SEW electric motor with belt drive, untested, available for sale as is Godoxpqxaspfx Ap Dekc

Condition: used, Second-hand machine Gkedozk N R Djpfx Ap Dsc Features and technical specifications: - heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900–4400–6000–7800–10,000 rpm - Height and swivel adjustment: electrically driven - Fine adjustment: via handwheel - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), For sale: SEW-Eurodrive SF32 DT80K4 geared motor with a 0.55 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear from use, which do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Model: SF32 DT80K4 Rated power: 0.55 kW Power supply: 230/400 V (Δ/Y), 3-phase Frequency: 50 Hz Motor speed: 1380 rpm Output shaft speed: 77 rpm Torque: 54 Nm Gjdpfx Apszm Sd Ee Dokc Gear ratio: i = 17.55 : 1 Rated current: 3.05 / 1.75 A Protection class: IP54 Insulation class: B Mounting method: B5 Weight: 17.38 kg Power factor (cos φ): 0.77 Lubrication: CLP680 Country of origin: Germany

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Godpfxjzncq So Ap Dskc Insulation class: F Duty cycle: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: excellent (used), For sale: VEM electric motor in industrial version. Gedpfx Aoyv Uuzep Dekc The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: Used Signs of use Visible corrosion on parts

Condition: new, I offer SIEMENS synchronous motors in the following versions: 👉 1FE1093-6WV11-1BZ2-Z 👉 1FE1093-6WV1 High-grade built-in industrial units suitable for CNC machine tools and precision drive systems. Gsdpfx Apjyxdw Ds Dokc Condition: new / old stock (NOS) ⚙️ Technical specifications: Manufacturer: Siemens Type: synchronous motor (built-in / spindle motor) Voltage: 425 V Maximum speed: up to 7000 rpm Cooling: water-cooled Temperature sensor: KTY84-130 Duty cycle: S1 / S6 Protection rating: IP00 Country of origin: Germany 📊 Additional information (for version 1FE1093-6WV11-1BZ2-Z): Power: 16.8 – 21.5 kW Current: 43.0 / 60.0 A Maximum torque: 165 Nm 📦 Included: stator rotor Siemens documentation

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR worm gear motor with a WEG AL71-4 three-phase motor, 0.37 kW. Gkjdszmyybjpfx Ap Doc The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. Only normal signs of wear are visible, consistent with its use. Thanks to its compact and robust design, it is ideally suited as a drive in industrial machines, conveyors, production lines, packaging equipment, and automation systems. The GSN04 series is a range of compact gear motors designed for applications requiring reliable power transmission. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: WEG Motor type: AL71-4 Power: 0.37 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1370 rpm Output speed: 140 rpm Gear ratio: i = 10 Output torque: 22 Nm Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) The scope of supply includes exactly what is shown in the pictures.

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Output speed: 130 rpm Gear ratio: i = 10.25 Output torque: 16 Nm Protection class: IP54 Gjdezmy Sdjpfx Ap Djkc Insulation class: B Operating mode: S1 Brake: 230 V AC Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: excellent (used), For sale: Lenze GST04-2B VCK071-32 gearbox with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. It shows normal signs of wear and tear consistent with use. Its robust construction and high torque make it ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: Lenze Gearbox model: GST04-2B VCK071-32 Motor manufacturer: Lenze Gkedpozmy Uxefx Ap Doc Motor type: MDEBA1M071-32 Power: 0.37 kW Supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1360 rpm Output speed: 44 rpm Gear ratio: i = 31.6 Output torque: 79 Nm Ingress protection: IP54 Insulation class: F Operating mode: S1

Condition: excellent (used), For sale: SEW-Eurodrive RF32DT71D6 geared motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear resulting from use. Thanks to its robust construction, it is ideally suited for driving industrial machinery, conveyors, feeders, rotary tables, and other drive systems. Technical specifications: Manufacturer: SEW-Eurodrive Model: RF32DT71D6 Gearbox type: RF32 Motor power: 0.25 kW Power supply: 220 V Δ / 380 V Y, 3-phase Frequency: 50 Hz Motor speed: 870 rpm Gedpszm Rimsfx Ap Dskc Output speed: 36 rpm Gear ratio: i = 24.17 Protection class: IP54 Insulation class: B Mounting method: IM B5 Weight: 11.43 kg Country of origin: Germany The geared motor has a shaft with a keyway and a B5 mounting flange.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,859 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshift, fork positioner, Heater, full cab, air conditioning, Gsdpsz Ev Nyofx Ap Dokc NEW ENGINE AND TRANSMISSION

Condition: used, Second-hand spindle for machines with an MK mount, designed for professional woodworking. The spindle is suitable for writing tasks. Includes a pack of various Fladder sanding papers. Technical data: - Mount: MK5 Gjdpfez Iwncsx Ap Djkc - Clamping length: ~ 65 mm - Flight circle: ~ 100 mm

Condition: new, Year of construction: 2026, HOFMANN TFS 107 Table milling machine with swivel adjustment +/- 45.5° 7.5 kW motor, 400 V, 50 Hz, Table size 1,200 x 815 mm, heavy-duty ribbed cast iron table, with table rings Electronic start and braking system Electric height and swivel adjustment in rapid and slow mode accurate to 1/10, height adjustment approx. 145 mm, Swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601, efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with quick-release nut "fix" Left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Includes options: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Stepless speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, - HOFMANN milling fence type 2620, including quick-release system for the fence jaws, digital display - 2 cast iron fence jaws 500/500 mm - Control panel moved upwards Gkodpfx Apjzyf Iko Doc - Tool compartment for TFS 107

Condition: used, DMG Gildemeister GMX 400 linear multi-tasking twin spindle CNC lathe with Siemens 840D control & pneumotec gantry parts loading system with coolant paper filtration system, chip conveyor, IFM mist extraction unit, oil chiller, automatic doors, foot switches, wash gun, handwheel, signal tower & manuals. Overall dimensions: L9,347mm x W4,646mm x H3,018mm. Weight 24,000kg. With dual rohm KUBF-400/4 Ø400mm power chucks. Swing Ø640mm. Maximum turning Ø640mm. Maximum turning length 1,500mm. Axis travel 'X1'=550mm, 'Y'=220mm, 'Z1'=1,585mm, 'X2'=225mm, 'Z2'=1,400mm, 'Z3'=1,500mm, 'B'= ±120°. Rapid travere 'X'=40m/min, 'Y'=24m/min, 'Z'=60m/min. Spindle bore Ø107mm. Maximum bar capacity Ø92mm. Maximum main spindle speed 4,000rpm (45kW Motor). Maximum sub spindle speed 4,000rpm (45kW Motor). Maximum rotary spindle speed 12,000 (22kW Motor). Rotary spindle taper capto C6. Gkjdpfxjz Hzuwe Ap Dsc 60 position ATC. 12 position sauter turret. 20 position loading station with air blast cleaning tank.

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Manufacturer's number: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 pieces Transmission ratio: 1:1 Spindle spacing (center of spindle to center of spindle diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Gkedpfxsz Hfcle Ap Doc Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collets Overall height from tool holder (bottom) to gearbox housing (outer edge, top): 218 mm - 4 spindle drives with collet chucks (collets are not included in the scope of supply) - 4 tool spindles, adjustable in steps by twisting within the spindle spacing Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition

Condition: like new (used), Year of construction: 2009, ABB AMI 630L6A BAFH – 4800 kW (4.8 MW) electric motor – 2009 – UNUSED For sale: an industrial ABB AMI 630L6A BAFH electric motor with a power rating of 4800 kW (4.8 MW), manufactured in 2009 by ABB Oy in Helsinki, Finland. The motor is unused and comes from stock, preserved in very good visual condition. The unit has the original manufacturer's nameplate and a complete housing with a cooling system. The motor is designed for the most demanding industrial applications, requiring high power, high reliability, and continuous operation. Technical data: * Manufacturer: ABB Oy, Finland * Model: AMI 630L6A BAFH * Year of manufacture: 2009 * Condition: unused * Power: 4800 kW / 4.8 MW * Voltage: 3300 V * Current: 988 A * Rotational speed: 992.6 rpm * Frequency: 50 Hz * Power factor: 0.88 * Number of phases: 3 * Winding connection: delta (D) * Insulation class: F Gkedpoz N Tddsfx Ap Djc * Protection class: IP55 * Operating mode: S1 – continuous duty * Cooling system: IC611 * Mounting method: IM1001 * Power supply: ABB ACS 1000 frequency converter * Weight: 14,250 kg * Serial number: 4598458 * Identification number: 323FN400M01 * Standard: IEC 60034-1 Application The motor can be used in large industrial installations: * High-performance industrial pumps * Compressors * High-power industrial fans * Power industry * Steel and metallurgical plants * Chemical and petrochemical industry * Mining and extraction industry * Drives for heavy industrial machinery Condition of the unit The motor is unused and has been stored since purchase. The unit is in very good visual condition. Only minor signs of storage and transport are visible. Includes an integrated cooling system and connection elements. Due to the long storage period, it is recommended to check the condition of the insulation, bearings, and lubrication system before the first start-up. Transport and sale The unit weighs 14.25 tons. Professional loading and transport can be arranged within Poland and throughout Europe. Additional information and photos are available upon request. Please contact us for a price quote.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, Gedpfx Apoz R R Ttj Dekc I am offering for sale a Felder F900Z Z under-spindle milling machine. The machine is in VERY GOOD condition – it has been used less than it has been standing idle. It is a robust machine, ideal for precise woodworking. Its condition can be seen in the photos; it is ready for immediate use and has no hidden defects.