Used Spindle Motor for sale (32,452)

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Isdjwrm Dtepfx Adwjtb Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 Iedpfxswthbie Adwstb >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm Iedpewag Stsfx Adwstb >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: used, power capacity 7,2 Nm Isdevtr S Tjpfx Adwotb volt 0 V ampere 16,7 A weight of the machine ca. 17 kg

Condition: used, power capacity 10,4 Nm volt 0 V ampere 12,1 A weight of the machine ca. 22 kg Itjdpfxsvtr Syj Adwob

Condition: used, power capacity 6,6 Nm Itodpfx Adjvtr Stewob volt 0 V ampere 10,8 A weight of the machine ca. 12 kg

Condition: used, power capacity 28 Nm volt 0 V Iodpfxovtr Sgs Adwotb weight of the machine ca. 49 kg

Condition: used, power capacity 14,5 Nm volt 0 V ampere 24,1 A weight of the machine ca. 19 kg Iedpsvttf Isfx Adwetb

Condition: used, power capacity 24,1 Nm volt 600 V weight of the machine ca. 19 kg Isdpfjvttfzjx Adwetb

Condition: used, power capacity 606 Nm volt 0 V Isdsvtr R Nspfx Adwstb ampere 10,8 A weight of the machine ca. 11 kg

Condition: used, power capacity 6,6 Nm volt 0 V Iedpfjvtr R Ajx Adwjtb ampere 10,8 A weight of the machine ca. 11 kg

Condition: used, power capacity 15 kW volt 380 V ampere 28 A weight of the machine ca. 84 kg Ijdpfx Adjvttctswjtb

Condition: used, power capacity 606 Nm volt 0 V ampere 10,8 A weight of the machine ca. 12 kg Itjdpovtr Rvefx Adwjb

Condition: used, power capacity 14 Nm volt 0 V Itjdpfx Adsvtr T Rsweb ampere 0 A weight of the machine ca. 34 kg

Condition: used, power capacity 3,8 kW volt 0 V Itjdpovtr T Dsfx Adweb ampere 11,7 A weight of the machine ca. 34 kg

Condition: used, power capacity 30 kW Itedsvtr Tqspfx Adwjb volt 400 V weight of the machine ca. 180 kg

Condition: used, power capacity 29 Nm volt 158 V ampere 34 A Itodpfevtr Tkox Adwob weight of the machine ca. 36+ kg

Condition: used, power capacity 5 Nm volt 0 V Ijdpevtr Tdefx Adwstb ampere 5,3 A weight of the machine ca. 34 kg

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 Ijdjx D Dnkjpfx Adwstb This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Itsdpfx Asx S Sizjdweb Application Types Boring & Drilling (Wood)

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW -Shaft: Ø 40 x 80 mm Iedpfx Asx Tdy Uedwetb -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg

Condition: excellent (used), Spindle moulder with sliding table and pneumatic clamp, including HolzHer ETZ feed unit. 4 feed speeds: 2 – 12 m/min. 3 new feed rollers. Table size: 1000 mm wide, 930 mm deep. 30 mm spindle. Heavy-duty construction. Milling fence with fine adjustment. 4.5 kW. Weight approx. 600 kg. Isdpsudwlzofx Adwjtb

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Itjdox Sw E Iepfx Adweb Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: like new (used), Spindle bearing Brand Union Isdpfxodvvtls Adwjtb Working RADIUS 600 mm Spindle diameter 130 mm

Condition: used, Grinding spindle Itedpec Tuxdjfx Adwsb Make FAG Dimensions of the conical pin of the recording: Diameter 80-61 lg 100 mm intake Cone Diameter min. 68 lg. 70 mm Diameter Max 80 lg. 70 mm min. 61 lg. 100 mm Max. 80 lg. 100 mm Length 500 mm Diameter 200 mm Weight 100 kg DX9UK3MUZNK