Used Spindle Moulder for sale (12,521)

Condition: excellent (used), Table milling machine Oltrogge Table 1000 x 1000 mm casting machine, 2 speeds (3000/6000) flat belt drive Kwsdpeuhn Tdofx Adwst

Condition: excellent (used), Year of construction: 1990, Spindle moulder TS110 Year of manufacture 1990 Kodpfov Im Swsx Adwjwt 380 Volts, 7.5 HP Fence with fine adjustment 4 speeds: 3,000, 4,500, 8,000 and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 speeds, Power feed rollers new

Year of construction: 2004, condition: excellent (used), HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture 2004 S/N 127-01323 manufacturer: Hofmann Bad Windsheim from a training company very good condition manual height and swivel adjustment for fine tuning analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Kwjdpfx Adem Tg Ecjwjt Weight 1300 Kg

Condition: good (used), Table length 115 cm Width 90 cm 3/4 kW motor Kedpfxewm Hbbs Adwewt 45-degree angle Spindle 30 mm

Condition: excellent (used), 2 spindles 30/40 mm Motor 5.5 kW Table length 250 cm Ksdpjwq Du Hefx Adwewt Width 37/100 cm Upper and lower table as well as electric angle adjustment

Condition: used, Year of construction: 1997, SECOND-HAND SPINDLE MOULDER GRIGGIO MOD. T220 - CE RULES - Year 1997 Kwsdpfx Adewrh Iyewet

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 - Volt 400/50 - S/N 9813 - Year 1998 Kedpfowrh Hvjx Adwowt

Condition: used, SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Kedpfxjmxliao Adwswt - S/N 25 906/001

Condition: used, Year of construction: 2002, SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 FORTEC - CE RULES - ATS device - 1st horizontal botom - 2nd vertical right - 3rd vertical left - 4th horizontal top - 5th horizontal bottom - 6th universal Kwodpfx Aowrx Nbsdwst - Working width mm. 230 - Cardan feed - Year 2002

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right - vertical left - horizontal top Kwedpfx Adjrm Rxwswet - horizontal bottom Year 1994 V 380/50

Condition: used, Year of construction: 1997, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT P23E - CE RULES - Horizontal bottom 5.5Kw Kodowrxuwepfx Adwewt - Vertical right/left 7.5Kw - Horizontal top 7.5Kw - Horizontal bottom 4Kw - Year 1997 (CE)

Condition: excellent (used), Year of construction: 1995, WITH SLIDING TABLE AND FEED DEVICE TABLE SIZE: 1350 x 850 mm MILLING SHAFT DIAMETER 35 mm MOTOR POWER 4 KW (5.5 HP) Kwodpfx Adjwcq Idowst SLIDING TABLE SIZE: 900 x 350 mm FEED DEVICE WITH 4 ROLLERS

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00017920, overall weight: 510 kg, spindle diameter: 30 mm, milling spindle length: 180 mm, height adjustment type: mechanical, table length: 2,500 mm, table width: 810 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, input voltage: 400 V, spindle stroke: 90 mm, pivoting range: 45 °, working height: 923 mm, power: 7 kW (9.52 HP), Equipment: motor brake, - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation thanks to precision components and high own weight - Standard with reversible rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed adjustment is simple and convenient from the machine side - Standard with MK 4 quick-change spindle system - Large worktable made of cast iron for lasting precision - Easy handling due to control elements and speed display on the machine front - Large dimension milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel - Numerical display of the set spindle height, precise to one-tenth Kjdpfxewwkqhj Adwewt - High-performance industrial motors

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Kodpfsurwy Njx Adwswt

Condition: used, used Manufacturer: Schneider Model: SK 1/2 Machine number: 10144 GS-tested Motor: 5.5 kW Tiltable from -5° to +45° Motor brake Motor with 2 speeds / pole-changeable 6 speed settings: 4000/5000/6000/8000/10000/12000 rpm Right and left rotation Table size: 1150 mm x 850 mm Spindle diameter: 30 mm Spindle fence with fine adjustment Kwsdpfxjw Dgbio Adwot Control panel Extraction port D 100 / 120 mm Required space approx. 1600 mm x 1200 mm x 1500 mm Weight approx. 1000 kg Total connected load 5.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition No guarantee or warranty

Condition: used, Year of construction: 1991, cleaned, function checked, test runRunout: 3/100 mmwith glazing bead cutting sawwith feed deviceused, good conditionMake GuillietType QFPYear of construction 1991Machine no. ROM 8102 V 11889 kW motor reinforcedincl. feed with 4 rollersSpeed levels 3 / 4.5 / 6/8000Milling arbor diameter 50 mmClamping height 270 mmStorage location from locationDelivery in the current condition as seenTechnically tested, without acked.- free on truck - Kwedpfxsvwf Sbe Adwjt

Condition: new, New -RUWI Tischfräse Classic- Save working time with tools that can be called up: set up oncethe drive unit is always put back on with a flick of the wristpreset position- Mobile and flexible use in industry and trade: chamfers, grooves,flush milling- Supplement to the table and CNC milling machine- Quality and efficiency thanks to a durable, high-performance motorTechnical specifications:Function: router / under routerTable length: 640 mmTable width: 500 mmTable height: 910 mmDrive units: 3Power consumption: 1050 wattsVoltage: 230 voltsSpeed: 8000 - 25000 rpm steplessMobility: 4 swivel castersCollets: Standard ø8mm, optional ø6mm / ø6.35mm / ø10mmMilling stroke: 43 mmDust extraction connection: 120mmTools on demand: 3Tool height repeatable: YESRetrofittable drive units: No (up to 5 pieces for RUWI spindle moulder L)Weight: 91kg– Completely pre-assembled RUWI spindle moulder M with 3 drive units– Tool concealment– Removable suction tunnel with suction socket ø 120 mm- Operation manualNo. 10002 Kwodpfjvwf Shox Adwst

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Kodpfxsvwf Ucj Adwswt

Condition: used, used, good conditionMake FrommiaType 705 P1MachineNo. 119mobiletiltable from 0 to 45°motor 2 speeds/polarity reversible6 speed levels 2500/4500/5000/6000/9000/12,000 rpmright-left rotationtable size 1000 x 900 mmmilling arbor diameter 30 mmmilling fence with fine adjustmentsuction connection D 120 mmspace requirement approx. 1000 mm x 900 m x 1200 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Kwedpfxevxr Rtj Adwst

Condition: used, with spindle adjustment depth in the tablesecond handMake SchneiderType SK2 / 8SMachine no. 80002Motor 4.5 / 5.5 kWmotorized brake electronically6 speed levels 3000/4000/5000/6000/8000/10000 ht-left runMilling arbor diameter 30 mmTable top extension approx. 2 x 450 mmMilling fence with fine adjustmentControl panel aboveSocket for feederExtraction connection D 100/120 mmRequired space approx. 2100 mm x 1300 mm x 1800 mmTotal connected load 5.5 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without guarantee and warranty Ksdpsvwf Icefx Adwewt

Condition: new, - new-manufactured by Ruwitype Classic- Save working time with tools that can be called up: Set up oncethe drive unit can be reset to the preset position with a flick of the wristplaced- Mobile and flexible use in industry and trade: chamfers, grooves,flush milling- Supplement to the table and CNC milling machine- Quality and efficiency thanks to a durable, high-performance motorTechnical specifications:Function: router / under routerTable length: 640 mmTable width: 500 mmTable height: 910 mmDrive units: 3Power consumption: 1050 wattsVoltage: 230 voltsSpeed: 8000 - 25000 rpm steplessMobility: 4 swivel castersCollets: Standard ø8mm, optional ø6mm / ø6.35mm / ø10mmMilling stroke: 43 mmDust extraction connection: 120mmTools on demand: 3Tool height repeatable: YESRetrofittable drive units: No (up to 5 pieces for RUWI spindle moulder L)Weight: 91kgwith:1 Ruwi unit fine adjustment No. 104501 Ruwi fence for table router Classic No. 10150 Kedpjvwf Susfx Adwswt

Condition: reconditioned (used), functionality: fully functional, 4 speeds 3000/6000/4500/9000 rpm. right/left rotation Spindle lock by foot control Milling stop with fine adjustment spindle diameter 30 mm suction top+bottom each 120 mm spindle wrench open-end wrench 41 mm Cable + plug 16 Amp. Kwsdjittnzspfx Adwst

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: KK052469, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank Kodpsiinm Hofx Adwowt right/left rotation motor brake socket for feed unit Protective covers for hand milling spindle Ø 30 mm Aigner stop suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 591, Motor power 4kW table size 800 x 800 mm spindle Ø 30 mm Kwodpfx Adoiw D Uhjwst suction nozzle 120 mm Handwheel height adjustment fence jaws individually adjustable right/left rotation speeds 3/4/6/9000 rpm no brake

Condition: reconditioned (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 662310, Connected load 380V 3kW + 4kW right/left rotation Kwedpeiw D N Dofx Adwot Star-delta switch 2800/4500/6000 rpm and 5600/9000/12000 rpm