Used Spray Painting Line for sale (21,299)

Condition: used, Year of construction: 2022, Millutensil Colombo Coil Fed Press Line 300T (2022) comprising Colombo Mercurio 1 300T-A press Capacity: 300T Table: 1300 x 1200mm Opening: 800mm Millutensil SFOC 10000 Decoiler: Capacity: 10,000 kg Maximum Belt Width: 800 mm Max. coil diameter: 1600mm Millutensil RMB 60.9.800 C Straightener Working width: 800 mm Dcjdpfx Abexlqqzecen Millutensil AE 125.800 Electronic Feeder Millutensil LRF110.800 Lubricator

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. As an option we can offer used machines for your requirements. Dsdpfoqlbpgsx Abcjcn Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. Dcodpfxoxiv E Ej Abcjn The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: ready for operation (used), Silverson pump on s/s frame, model: 450 LS, machine number: 450LS, machine number: 450LSM2114, 380/415 V, 3 Ph, 50 Hz, dimensions: 1300 mm x 750 mm x 1550 mm.  Dcodpfx Aow Hfquebcsn

Condition: repair required (used), Year of construction: 2002, operating hours: 14,000 h, functionality: limited functionality, Wintersteiger dsg 200S 250mm height lamella sawn In-feed roller not working Dedpfxoxlr Hqj Abcecn

Condition: excellent (used), ElectroMashStan automatic tube rolling line. For rolling tubes up to 1.5 mm thick. Can be painted or plain. Designed for a production of 11 metres. Automatic cutting. Automatic line with 6 speeds. It has been used for the production of fence posts. Purchased new, one owner. Total length 15 metres. Dcedpfxsufz Rde Abcjn The line is in very good condition, little used. If you have any further questions, we will be happy to answer them.

Condition: used, Wagner Cavity Enameling Line (Gema) Djdpfx Absxlqp Rjcjcn Complete cavity assembly Line Comprising: OptiMatic 2 Automatic Powder System OptiGun 2AE1 Enamel Automatic Guns MRS - Multi Recovery System BIG-BAG Fresh Powder Station OptiCenter OC03 Gematic CR03

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Dcsdekhaadopfx Abcjn Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. To get more information about our machinery please contact our sales department

Condition: used, Year of construction: 2011, OMET 2M2B 400T Automatic Coil Feeder Press Line; Including: Omet Press; Asservimenti Resse SMC70 Decoiler; Asservimenti Resse AP6 1150 C Straightener; Asservimenti Resse CRH 1150C Electronic Feeder Dsdow U N R Tepfx Abcscn

Condition: good (used), We have four units in stock. Comes complete with plastic drum, k-tron powder feeder, vibrating scarf feeder. They are the older version so they measure the height of the snack flow and it adjusts th seasoning to that based on preset recipes. 10 units had one HMI which we have along with the software and the plc to replicate the softwer. We would supply comlete machines with either one hmi per machine or one central hmi for many units. We can also upgrade it to be identical to the new version. Dsdpfxot Ty I Ee Abcocn

Year of construction: 1980, condition: ready for operation (used), Fully Integrated Concentrate Factory (Tomato Paste – Mango & Guava) 🇮🇹 Manufacturer: Ing. Rossi Catteli – Model Annetto – Parma, Italy ⚙️ Capacity: 300 tons of Tomato/day 🛠️ Equipment Model: 1980 ✅ Fully refurbished in 2024 (Electrical + Mechanical – Like New) 🔸 Production Line Includes: Receiving & sorting unit Hammer + Mono Crusher (12 tons/hour) 3 Pulper finishers 14-tube pre-heater Storage tanks Dcjdoxdn R Aopfx Abcon Triple-effect evaporator including 3 pumps Cooling Condenser Cooling tower All pumps and motors European brand Full PLC automatic control German automatic pneumatic valves Line located in Egypt Evaporator can be sold separately WhatsApp:

Condition: good (used), Year of construction: 2005, KUPER SHRINK TUNNEL DUPLEX Manufacturer: KUPER Type: ST/I-1400 Year of construction: 1987 Serial number: 594 Working width: 1300 mm Role Holder: Yes Electrical connection: 400 V Overall size, H: 3500mm Overall size, W: 2350mm Overall size, M: 1850mm Vv 2 blow-off units Dcedpjkn Rz Hofx Abcon Power: 59kW Temperature range 230°C Duplex 2100/650 film input station vv film holder Swivel arm with chain hoist sealing rod Length 2100mm "Siemens" control panel Overall Size: 3000*2000*2300mm További információ erről a forrásszövegrőlTovábbi fordítási információhoz forrásszöveg szükséges Visszajelzés küldése Oldalsó panelek

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Djdpfxjw Ec Rie Abcscn Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Dcsdpfxerqg U Ds Abcen

Condition: used, Wagner Cavity Enameling Line Gema with Opti Center Djdpfx Aow U Ra Nebcocn

Condition: ready for operation (used), Year of construction: 2008, The machines can make stand up pouches with zip lock from foil. It was in operation till August. Stand-up pouch sizes :min 100x40x150h | max 300x200x400h mm, speed: 40-60 bags per minute. Dcedpfsu Uvqqjx Abcjn The complete bagging line is also for sale, it includes Ishida 14 weigher in nclosure, Wiese bucket elevator, Phantom metal detector, Prisma check weigher, feeding hopper for powders, Impulse vibratory feeder, all are from 2008.

Condition: used, Year of construction: 1995, coil width: 4 mm, material width: 4 mm, DECOILER .. sheet width max.: 4 mm .. sheet width (min): 0.8 mm Dodoxlh Nzepfx Abcscn For sale is a slitting line from Guida, originally supplied by Mubea Switzerland, in good condition and fully operational. This machine is designed for slitting entire coils into precise strip widths – for example, for direct feeding into a tube welding line. Technical specifications: Processing thickness range: 0.8 – 4 mm Suitable for steel quality S275 up to 3–4 mm Maximum line speed: up to 300 m/min

Condition: good (used), Code: 0008 Brand: ZAFFARONI Model: MLS 130 TR - CE Standard Multi-rip Saw for executing cuts and multiple grooves on strips, also with veneered surfaces and coated with various materials and it can be used, for example, for the production of prefinished parquet - CE Standard Dcodpfx Aevtrk Nebcen Features: Compact tubular steel structure Regulation system of the cutting and grooving depth, without changing the working table height with respect to the floor Advancement group of the workpieces through shutters, with opening by a pneumatic cylinder so to permit the tools change on the spindle Electronic adjustment of the advancement speed Workpieces input system through motorized belts and lifting rods Rear output pieces group through motorized belts Opening regulation system of the workpieces passage through the advancement group, according to the panels thickness Safety system for panels thickness control Tool-holder spindle of hardened and round steel, with anti-rotation locking, so to make easier the tools change operations; it is supported on one extremity by a double fixed support and on the other one by a sliding support, which can be removed for the setting / disassembling of the tools Technical data: Max workpiece length 1300 mm Min workpiece length mm 300 Min workpiece width mm 60 Max workpiece width mm 350 Min/max workpiece thickness mm 2/50 Spindle motor 22 Kw Tool-holder spindle dimensions Ø 80 x 1310 mm Spinde speed 4000 rpm Advancement speed from 5 to 30 m/min' (up to 30 pieces/minute of productivity) Working table height 990 mm Max tools diameter 275 mm - Blade bore mm 80 Projection of the tools from the working table, adjustable from 27 to 47 mm with tools Ø 250 mm or from 40 to 60 mm with tools Ø 275 mm max Max milling depth 12 mm with mills Ø 180 mm - 22 mm with mills Ø 200 mm Total installed power Kw 25 Suction port diameter mm 200 Compressed air 7/8 bar Machine dimensions mm 2100 x 2260 x 1500 h Machine weight 1850 Kg. approx.

Condition: used, Esimec Automatic 3 Presses Line Dcedow U Rckjpfx Abcsn

Condition: new, Brand new, never used. Dsdpfx Abew Dgiyecscn

Condition: used, Year of construction: 2013, sheet thickness steel (max.): 4 mm, sheet thickness (max.): 4 mm, outer diameter: 51 mm, pipe diameter: 51 mm, FEEDSTOCK STEEL STRIP .. sheet thickness max.: 4 mm PRODUCT (PROFILE, TUBE) .. external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage -Strip welding device -Side planer Dsdpfsxlh Hmox Abcscn -Calibrating roll stand -Forming unit -HF welding unit THERMOTOOL -Unit for scraping without tools -Cooling section -Calibrating unit -Flying saw -Removal section for manual removal -Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm -Various accessories and machine-specific spare parts -Documentation and maintenance logs -CE declaration

Condition: used, Year of construction: 2001, Two lines available: Line 1 for hexagonal wire beads Line 2 for square wire beads Djdpsxb U Agsfx Abcecn One line consists of bead winder, bead extruder and cooling line, carousel and loader robot + coil winding.

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter: 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm .. external diameter max.: 38 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling Dcodpfexlh E Njx Abcon .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line from MUBEA (Switzerland). The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Operation: handled by 7 operators Condition: well-maintained, fully operational Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Condition: used, Year of construction: 1962, Banbury Kneader / Mixer #3 with peripheral equipment Documented modifications / upgrades: Year Modification / Upgrade 1962 Gearbox upgrade Kneader III 1973 Carbon black weighing & dosing system for Kneader III 1981 Exhaust extraction system for Kneader III 1985 Batch-Off machine for Kneader 3 1985 Temperature control unit for Kneader 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Kneader III 2007 Hose scale for Kneader #3 2008 Vibration measurement system Mixer III 2008 Column-mounted slewing crane for bale handling Mixer III 2009 Vacuum hoist system Kneader III 2010 CMS system for Mixer III 2013 Long-strip cutting device for Kneader III 2014 Slab feeder for Kneader III Dsdpfexb T T Rox Abcocn 2014 Overnose conveyor Kneader III 2014 2 × floor scales for Kneader III 2014 New control system for Kneader III 2014 Cooling register MUAFAN 1+2 – cooling line mill Kneader 2+3 2015 Monitoring system (Kneaders I–III) for CMS Kneader III 2017 Mixer body replacement Kneader III 2023 Rubber kneader III KSBI-L270 Control system: New control system 2014, CMS system 2010, DC Drive / Automax, PLC Batch-Off & Conveyor, AC Drives documented Maintenance / condition: Regular modernizations and upgrades documented 1962–2023 Accessories / options: Batch-Off machine, slab feeder, put-up conveyor, long-strip cutter, floor scales, bale handling crane, vacuum hoist system, carbon black silos & weighing system, extruder, roller die, roller head with conveyor, cooling systems (dip tank, cooling line, laydown), control systems (DC Drive, AC Drive, Automax, PLC)

Condition: used, Year of construction: 2012, Year Modification / Upgrade 2012 Installation of Quadruplex Extrusion Line No. 02 for single tread production 2012 Foundation work for Quadruplex Extruder No. 02 2012 Installation of induction heating insert and die on Quadruplex Extruder No. 02 Dodpfx Abjxb Uimececn 2013 Expansion of extrusion tooling for tread and sidewall production 2014 Two Siemens compact asynchronous motors 2017 New extruder screw (150 mm base size) for Quadruplex Extruder No. 2 2019 Closed-loop system upgrade (extended) 2021 Closed-loop system upgrade (extended) 2022 New 200 mm screw for Troester extruders Control system: Modern control and visualization units (control desks, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Maintenance / condition: Regularly modernized and upgraded from 2012–2022 Accessories / options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding equipment