Used Spraying Head Wollin for sale (11,510)

Condition: good (used), Year of construction: 2001, Air-operated airless pump on a pump trolley The T2001 piston pumps are robustly constructed air-operated airless pumps designed for conveying, transferring, and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE, or PE. ATX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during pumping and spraying - Versatile thanks to stainless steel, carbide, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to the self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Gjdpsrt Uy Nsfx Aatebt Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction head (empty pump): 1.5 mWS Suction head (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Maximum stroke rate (short): 50 cycles/min Maximum stroke rate (continuous): 20 cycles/min Maximum material pressure: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 cc Maximum operating pressure: 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4" Material outlet: G3/8" Material inlet: G1" Weight: 45 kg Customs tariff number 8424 8970 Year of manufacture: 2001 New price: €13,600 incl. VAT. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring Godpfjxmfc Uex Aatobt - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 6,600 kg, year of last overhaul: 2025, Overhaul work 2025 - Lifting devices overhauled - Bottle carousel overhauled - Glue roller overhauled - Roller motor replaced - New protective covers installed - Printing heads overhauled - All sensors of the glue heating system replaced Gbodpfx Ajzv Rp Sjatjt - Hoses of the extraction unit replaced - Entire electrical system inspected TECHNICAL DETAILS Output: 45,000 bottles/hour Bottle format: 500 ml, 1 l, 1.5 l Labeling system Labeling method: Roll-fed / roll labeling Label placement: Wrap-around labeling Rotation direction: Clockwise Carousel movement: Mechanical cam drive with brake/clutch Optical centering system: Mechanical Head adjustment: Manual Number of bottle carousels: 25 Number of labeling stations: 2 MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Power consumption: 35 kW Current consumption: 57 A Machine weight: 6,600 kg EQUIPMENT - Mechanical cam drive with brake/clutch for bottle carousel movement - Mechanical optical centering system - Manual head adjustment - Roll-fed labeling system for wrap-around labels - Two labeling stations - Safety guards

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 1,00,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Gbjdpfezhnlzox Aatjt Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine Godjzlpb Sspfx Aatebt - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: used, Year of construction: 2004, machine/vehicle number: 257253, Clamping force: 13,000 kN, total weight: 69,000 kg, including spraying unit WOLLIN, deburring press REIS TKP3, serial number: 181013, year of manufacture: 2004, weight: 680 kg, industrial robot REIS V60, serial number: 541010, year of manufacture: 2004, machine weight: 1,950 kg, melting and holding furnace STRIKO WESTOFEN W1200SL Pro, year of manufacture: 2004, serial number: 7961, furnace chamber volume: 970 dm³, empty weight: 3,100 kg, heating capacity: 22 kW, machine out of service, not ready for operation. Godozhaydepfx Aatsbt

Condition: used, Year of construction: 1992, machine/vehicle number: 6597, Revision status: 2005, clamping force: 320 tons, melting and holding furnace DOGUS MACHINE EMHF-300/45, year of manufacture: 2020, heating capacity: 45 kW, diameter: 1,320 mm, height: 1,500 mm, casting automation, spray device WOLLIN LSC1, year of manufacture: 2014, serial number: 1009. Gbsdezhaykepfx Aatot

Condition: new, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories Gedsvzdw Dopfx Aatobt 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Side guard closed Hanging net box, galvanized All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: new, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox Gsdpovzdwwsfx Aatsbt 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Side guard closed Hanging net box, galvanized All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Gbjdpstdgkxjfx Aatst Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: used, Year of construction: 1996, machine/vehicle number: 7037, equipped with an ABB IRB6400F removal robot, year of manufacture: 1997, serial number: 1318, inventory number: 073005700, WOLLIN spray unit, casting automation, control system, touch panel, cooling tank, machine platform, belt conveyor, 1 ABB industrial robot as a spare parts dispenser. Gedezhax Tspfx Aatobt

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure Gbjdpfxepl Tgme Aatjt - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps Godpfehrumajx Aatebt - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Gbjdpfx Aszx D Sfoatot Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 3 angle heads Profile length measurement at the head Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting System TruLaser 3040 Fiber (L81) 6000 Watt X Working area max.: 4000 mm Y Working area max.: 2000 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 18581 hrs. Laser beam on: 13125 hrs. Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 25 mm Sheet metal thickness copper max.: 10 mm Standard Equipment Machine: Working area: 3000 x 1500 mm Closed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Closed beam guidance via laser light cable (LLK) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting head: 1-cutting head strategy Universal cutting head with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas / pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Gsdpfx Aaszln Udetebt Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available from TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transmission: USB interface RJ-45 network interface Central Link Online Update Manager • Automatic download of updates via remote support connection • Installation of the updates when the machine is switched on or by the customer or by TRUMPF service • To use, the Online Update Manager must be activated; deactivation is possible at any time by the customer. Safety: CE marking Light curtains Multi-chamber extraction system Machine enclosure with certified viewing pane, door on the right Extended Standard Equipment: Compact dust collector Sliding roof Automatic pallet changer in the longitudinal direction Support rails made of structural steel External solid-state laser TruDisk 3001 with 1 LLK output Power supply for TruDisk via the machine - External solid-state laser TruDisk 6001 - BrightLine fiber - Nozzle changer - Copper cutting package - Brass cutting package - Mobile Control App - Viewing pane, door on the left - HighSpeed Eco - RCI interface - CoolLine - DetectLine

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Gsdoy Sak Topfx Aatobt Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: good (used), Used pressure vessel / Electrically heatable Article number: 10407 Last application: Cosmetics Volume: 695 liters Type: Standing on 3 legs Material (in contact with the medium): 1.4404 stainless steel Design: Single-walled / Insulated / electric heating Manhole: 345mm Bottom: Arched Gbodpsd R Hgkjfx Aatet Top: Arched Operating pressure according to nameplate: -1 / +3 bar Test pressure according to nameplate: 8 bar Max. operating temperature: +152°C Dimensions of the vessel: Outer diameter: 820mm Cylindrical height: 1220mm Height of legs: 750mm Distance from outlet to bottom: 800mm Overall height: 2040mm Overall width: 1000mm Materials: Inside: 1.4404 / AISI316L Outer parts: 1.4301 / AISI304 Equipment: Nameplate: yes Outlet: DN 65 Various connections Insulated Electrically heatable Spray head

Condition: new, Year of construction: 2022, Exhibition machine Panel thickness: 8 - 50 mm Edge thickness: 0.3 - 3 mm Solid edges up to 5 mm Gbsdpfxozvapuo Aatet 7" touchscreen Release agent spraying at the infeed Pre-milling with two diamond milling heads Infrared preheating lamp Top-mounted, interchangeable gluing unit (including a second glue reservoir) Cross-cut saw unit Flush trimming unit R1 Corner rounding unit Nesting scanning rollers Profile trimming unit Glue trimming unit Spraying unit for finishing Smoothing unit New machine, available after exhibition

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet Gbsdezv Sa Ejpfx Aatst - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Gsdpfx Asx Ecfkjatjbt Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Gbjdpfx Aaezqvhvotet

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15066, 1 x Atwell Labellers Ltd inline 3-head side-apply labelling machine with ICE Zodiac ES 8.4 Clarity thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. The label dispensers are run by a servo / stepping motor and is controlled by a micro-processor. Manufacturer - Atwell Labellers Ltd and EME etiketteringsmaskiner ApS. Models of Labelling Heads - 2 x EME Series 4000 and 1 x EME Series 2000. Model of Conveyor Section - EME MO-3000-S4-S2. Serial Number - 15066. Gbedpfxoy Hkqys Aatjt Date of manufacture - 2015. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (adjustable - can go higher).

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg Gjdey Ny A Dopfx Aatobt All information subject to change. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular saw machine VELOX 350 VA-MPS Hydro-pneumatic fully automatic model For saw blades up to 350 mm in diameter, mitre cuts left and right 45° and bevel cuts up to 45° left. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45° left 65mm round, 60mm square, 180x50mm flat - 45° right 115mm round, 100mm square, 150x80mm flat Standard features: • State-of-the-art micro-processor control with multi-function display • Safety package with the following functions: 1. Minimum inlet pressure monitoring 2. Clamping jaw monitoring/material tension • Hydro-pneumatic control of the saw head • Pneumatic double clamping device • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for fine length adjustment • Integrated coolant spray device • Connection nozzle for chip extraction system Speed 3600 min-1 Gbedozpxh Nspfx Aatet

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO Gbedpof Nwxwsfx Aatot - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes