Used Stair Thrower for sale (215)

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: Nwodpjrai N Asfx Ac Asd - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Year of construction: 2014, condition: used, JetPetroClean container washing station Producer: OU Dontal, Estonia Nodpehgimdsfx Ac Aewd The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2022/10/00001, type of input current: three-phase, PABLO PANEL AND COUNTERTOP PACKAGING LINE Price: €232,650 net For sale: a complete, fully automated line for packing panels and countertops in shrink film, equipped with an automatic labelling system and robotic loading and unloading. The line is designed for industrial operation, ensuring high throughput, process repeatability, and aesthetic, sealed packaging of the final product. The line comprises the following components: 1. Cell with loading trolley for a pallet of panels/countertops to be packaged and labelled; loading cell dimensions: 3500 mm x 1300 mm 2. Loading table with a transverse belt buffer magazine, dimensions: length 3000 mm x width 2200 mm 3. ABB four-axis robot with gripper for the automated pick and place of panels/countertops from the pallet to the loading table 4. SYSFORM 8305B labelling machine with magazine, year of manufacture: 2023 5. Belt conveyor, length 1900 mm x width 800 mm 6. IMPACK HYBRID 80 SERVO sealing unit with guillotine and film unwinding system for half-sleeve film, and a film storage magazine, year of manufacture: 2018 7. Roller conveyor, length 3000 mm x width 800 mm 8. Steel bridge with stairs on both sides for operator access across the line 9. Heat shrink tunnel PABLO TB 800X300X1800, year of manufacture: 2022 10. Roller outfeed table, length 3000 mm x width 2000 mm 11. ABB four-axis robot with gripper for automated unloading of panels/countertops onto a stack 12. Cell with roller conveyors, dimensions: 3500 mm x 3500 mm Line working range: - Maximum panel length: 3000 mm - Minimum panel length: 800 mm - Maximum panel width: 670 mm Nedpfoyk Hlgox Ac Aowd - Minimum panel width: 200 mm ⸻ Additional information: • Fully automated packaging and labelling process • Robotic loading and unloading minimize manual handling • Sealing system and heat tunnel ensure aesthetic, sealed packaging • Stable and safe internal logistics thanks to conveyors and roller tables • The line is ideal for manufacturers of countertops, furniture panels, wooden and composite elements The offered machine is part of a fully integrated industrial production line for panels using finger-joint technology. Additional machinery or complete production lines are also available for purchase. Full technical documentation is available. Sale terms: EXW (38-120 Czudec, Poland) – Incoterms 2020. If interested, please contact us by email or via WhatsApp.

Condition: new, Year of construction: 2026, The Cormak VP3000 gluing press is a solid and efficient machine that is ideal for the production of furniture, stairs and other wooden elements. Its steel construction guarantees durability and stability, and easy adjustment and fast movement of the pressure unit ensure comfort and precision of work. High-performance, fully adjustable hydraulic cylinders Nwsdpfxswcy U To Ac Asd Powerful hydraulic cylinders provide high pressure, necessary for gluing even thick and hard materials. Full adjustment of the cylinders allows for precise adjustment of the pressure force to the needs. Hydraulic valves allow for maintaining constant pressure Hydraulic valves maintain constant pressure during the entire gluing process, which ensures an even and durable connection of the glued elements. Constant pressure is a guarantee of work safety and avoidance of material damage. Hydraulic pressure indicator as standard The machine is equipped with a hydraulic pressure indicator that allows for ongoing monitoring of the pressure force, which makes it easier to control the gluing process. Thanks to the indicator, you can precisely set and maintain the appropriate pressure, which translates into high quality gluing. Solid steel construction The steel construction guarantees that the device will last for many years, even after intensive use. Solid materials ensure stability and safety when working with the device. Easy adjustment of the pressure unit Thanks to the easy adjustment, you can quickly and precisely adjust the pressure force to different materials. This translates into better work results and greater versatility of the device. The lock allows you to maintain a constant pressure The pressure lock allows you to lock the set pressure force, which is particularly useful for repetitive tasks. Technical parameters Total height 2040 mm Total width 3000 mm Max. clamping height 1550 mm Min. distance between pressure units 240 mm Distance of the hole from the pressure unit 50 mm Pressure 6 x 2000 kg Dimensions 3030x450x660 mm Total weight 260 kg

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Applications Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Nwsdjxy Hy Uopfx Ac Asd Operating manual (DTR) CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Manual (DTR): Polish/ English CE declaration: yes

Condition: new, Year of construction: 2026, Compact Material Lift 5 m / 300 kg – A Versatile Tool for Handling and Installation Tasks Key Advantages of the Lift Load capacity up to 300 kg – safe lifting of boxes, equipment, pallets, and assembly components. Lifting height of 5 meters – ideal for working at various levels, including ceiling installation tasks. Three-section mast – smooth extension of top, middle, and bottom sections for maximum working height. Self-adjusting and all-terrain wheels – easy transport over uneven surfaces, thresholds, and stairs. Winch system with self-locking brake – ensures the load remains safely at the desired height. Mast lock – prevents accidental lowering in case of a lifting mechanism failure. Stabilizing outriggers – guarantee structural rigidity when operating under full load. Construction and Technology The device is designed for intensive use and ergonomic operation. The three-section mast with a telescopic system allows for compact transport dimensions while reaching the full working height of 5 meters. The mast sections extend smoothly and safely, and the integrated locking mechanisms ensure full control of the load during every stage of operation. Durable forks provide stable support for various types of loads. Their construction ensures even weight distribution, which is especially important when working with installation devices or construction materials. Large-diameter wheels and self-adjusting travel components allow the lift to move efficiently over rough terrain and in narrow working spaces. Work Safety The lift is equipped with a range of safety features, including: Self-locking brakes in the winch mechanism – protect against sudden dropping of the load. Mast lock – increases safety during stationary use and static work. Side outriggers – eliminate the risk of tipping over under heavy load. Applications This compact material lift is a universal tool suitable for many industries: Nwedjw U Scfepfx Ac Ajd Construction and technical installations – installation of air conditioners, fans, ducts, and structures at height. Warehousing and logistics – stacking goods on racks, loading and unloading delivery vehicles. Retail and exhibition setups – mounting displays, banners, advertisements, or store lighting. Industrial manufacturing – handling components and equipment during assembly of production lines. Standard Equipment Three-section mast with safety lock Heavy-duty forks Winch system with self-locking brake Two stabilizing outriggers All-terrain and self-adjusting wheels Material Lift Specifications: Parameter Value Lifting height 5000 mm Fork length 690 mm Folded height 2000 mm Length (folded/unfolded) 740 / 1880 mm Width (with stabilizers extended) 800 / 1850 mm Ground clearance 50 mm Minimum fork height 150 mm Weight 145 kg Maximum load capacity 300 kg Capacity based on center of gravity: – up to 60 cm 300 kg – up to 80 cm 250 kg – up to 100 cm 150 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning height: 5,000 mm, workpiece weight (max.): 50,000 kg, turning diameter over cross slide: 10,000 mm, feed length X-axis: 3,600 mm, feed length Z-axis: 1,300 mm, total height: 8,000 mm, total width: 12,800 mm, total length: 5,800 mm, rotary table diameter: 3,400 mm, spindle speed (min.): 1,200 rpm, travel distance Z-axis: 1,300 mm, stroke length: 4,450 mm, overall weight: 80,000 kg, power of the servo motor: 1,00,000 W, VERTICAL LATHE CNC FAGOR 8055. Double RAM, C axis. Turning diameter from 3,000 to 10,000 mm. Turning height 5,000 mm. Crossbeam travel 4,450 mm. Vertical RAM travel Z 1,300 mm. RAM cross-section 240x240 mm. RAM cross travel X 3,600 mm. Left-side turning RAM with tool turret. RAM with drilling/milling spindle ISO 50 taper. Drilling spindle speed 1,200 rpm. Table: diameter 3,400 mm, table travel 2,550 mm, hydrostatic table max capacity 50 tons. Main motor 100 kW. COMPLETE WITH: automatic tool changer, electronic handwheel, access stairs and balcony for the operator, jaws/extensions for clamping large-diameter parts. Overall dimensions: 12,800x5,800x8,000 mm. Weight approx. 80,000 kg. USED MACHINE REFURBISHED BY AEPI IN 2013 (1,800 working hours). Nodpfxeydd Nps Ac Aewd

Condition: new, overall weight: 2,700 kg, color: silver, gearing type: mechanical, suspension: other, HU/AU new, 2 horses, side ramp, stallion separation, roof hatch, window in the horse compartment, folding bed, 2 folding stairs, front window, aluminum floor, rubber floor, partition wall, tack room, tandem axle, permissible total weight 2,700 kg, color "metallic", available for an additional charge of €1,000.00 net. FOR US, THE CONDITION AND THE INSPIRATION ARE DECISIVE, THE PRICE COMES SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, TRADE-IN OR LOAN FOR YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data provided do not represent a guarantee and are not binding. The purchase contract that is concluded in the car dealership when the vehicle is purchased is binding. Errors and prior sale reserved! Nsdpfel Tiicox Ac Aswd

Condition: as good as new (ex-display), overall weight: 1,300 kg, empty load weight: 940 kg, maximum load weight: 260 kg, loading space length: 3,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 6 people. The insulated *stay trailer* is suitable for all seasons. The 50 mm sandwich construction and 60 mm insulated floor keep out the heat and cold. The electric heating provides support in winter. A crew trailer can be used on any construction site. It is even easier to get to the construction site with such a *car trailer* as it can be driven to the construction site behind almost any car. It can also be used as a *burro trailer*. Our construction trailers have as standard an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs for 6 workers, shelf, window with safety cover, coat hooks, four stable crank supports, 230V power socket, stable frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet room with toilet, storage room, other sizes for up to 16 people, 100 km/h shock absorber and anti-theft device. Nsdpfjqwi H Nsx Ac Aowd

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 20787, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, IMA BIMA 410 V 140/600 – Professional CNC Woodworking Machining Centre. The machine features a gantry construction and is designed for the production of furniture, stairs, and special components. The large Z-axis travel (600 mm) enables machining of high workpieces. It is equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. Controlled by IMA WOP. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC Machining Centre for Wood (point-to-point) 🧩 Working Area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z-axis – large clearance) • Number of axes: 3–5 (depending on configuration and head) ⚙️ Main Spindle • Power: 7.5 – 11 kW • Speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg Nwsdpfxsyky Hdo Ac Asd 🔧 Tool Magazine • Automatic tool changer • Number of positions: 18 🪚 Working Units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads • Special aggregates (optional): • Lock case routing units • Grooving saw • Blum/Lamello hardware aggregates • Angular aggregates 🧲 Worktable • Pod & rail vacuum table (consoles) • Approx. 8 working consoles • Vacuum pumps: 2 units (approx. 100–140 m³/h) ⚡ Drives and Feed Rates • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min • Z: up to approx. 25 m/min 💻 Control • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed Power • Total connected load: approx. 23 kW 📏 Machine Weight • approx. 6,500 – 8,500 kg (depending on configuration)

Condition: new, Year of construction: 2026, functionality: not functional, input voltage: 420 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 6,680 mm, number of axes: 9, number of slots in tool magazine: 15, total height: 4,100 mm, total length: 7,920 mm, total width: 9,000 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, WatMachinery NHSB 3517 5-AXIS is a fully automated stone-processing production system engineered as a self-contained manufacturing cell. It integrates loading, multi-technology cutting, automatic part transfer, contouring, and finishing into one controlled process chain. By automating workpiece transport and positioning and executing machining operations in sequence, the NHSB 3517 increases throughput, improves repeatability, and reduces variability associated with manual handling and operator-dependent setups—delivering consistent quality shift after shift. Built on a compact platform that combines a 5-axis sawjet and a 5-axis CNC contouring center, the machine supports diamond blade cutting for high-productivity straight and profile cuts, an independent 5-axis waterjet for internal geometries and tight radii, and hybrid strategies that use both technologies for optimized edge quality and process stability. The production cycle begins with ergonomic slab loading via a tilting table, followed by material alignment including vein-oriented positioning for visual matching. Primary cutting and separation are performed with automatic selection of blade, waterjet, or combined cutting. Parts are then transferred through an automated handling sequence using a vacuum manipulator system with eight vacuum cups (lifting capacity up to 500 kg / 1,100 lbs), enabling safe and stable slab and workpiece manipulation. A dedicated finishing workflow completes the process with automatic positioning on suction-cup fixtures, followed by unloading without manual intervention. Nwedpfxoylkf Tj Ac Aod The 5-axis head assembly is configured for multi-operation processing and includes a diamond cutting spindle, an independent 5-axis waterjet head, and multi-head edge-finishing units for efficient flat-edge polishing, supported by vacuum handling plates for secure, repeatable part manipulation. An integrated slab washing apparatus cleans the surface before vacuum operations to improve grip reliability and positioning stability. The machine can be supplied with an on-board camera (accuracy ±5 mm) to capture slab images for software-based nesting and defect avoidance, and probing systems such as a laser probe and stone perimeter probing to enhance dimensional accuracy and alignment. The industrial CNC controller features an operator-friendly HMI, supports DXF import and G-code execution, and also provides a manual mode for quick operations and simple cuts. Designed for manufacturers producing countertops, bathroom elements, stairs, and architectural stone components, the NHSB 3517 5-AXIS delivers higher automation, reduced manual labor dependency, and measurable gains in productivity and process consistency.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Large Industrial Mezzanine / Intermediate Platform – approx. 1,600 m² – Wooden & hot-dip galvanized grating – Well preserved For sale is a high-quality and very well-preserved industrial mezzanine platform with a total area of approx. 1,900 m². The platform is constructed from a robust steel frame (C-profiles, sigma profiles, columns, 5x stairs) and features flooring consisting partly of wooden panels and partly of hot-dip galvanized grating. Ideally suited for: • Storage & logistics Nwjdpfx Acsw Hf Aks Aed • Production & workshop • Trade fair construction or events • Intermediate platforms / storage mezzanines Technical data: • Area: approx. 1,600 m² • Flooring: wooden panels & galvanized grating (60% / 40%) • Condition: used, but well preserved • Stable & load-bearing (up to 500kg per m²) • Dismantlable & reusable The platform is currently dismantled and can be inspected by appointment. Buyer is responsible for transport – support with organizing transport can be provided upon request. The price refers to the complete platform of 1,900 m². A video showing the assembled condition can be provided if interested. Inspections possible by appointment.

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Nwjdpfx Asx S Ewroc Aed

Condition: excellent (used), functionality: fully functional, Pomac Cyclone Installation with Pump System Pump brand: Pomac Overall dimensions: Height 4000 mm Technical specification: - Drum screen: dimensions 1000 x 1800 mm - Collection tank: stainless steel, dimensions approx. 1270 x 1880 x 1350 mm Nwjdpfxeyku Nyo Ac Asd - Circulation pumps (2 pcs): Pomac brand, made of stainless steel - Pump capacity: 35 m³/h each, pressure 4 bar Construction: - Equipped with a protective cover - The entire system is mounted on a robust steel frame - Supplied with a grated floor (platform) and access stairs The cyclone installation is an advanced liquid separation and circulation system, designed for effective process water purification or solids separation in the food industry. The use of two high-performance Pomac stainless steel pumps ensures stable flow and the required operating pressure for filtration processes. Thanks to the integrated design with platform and stairs, the unit provides safe and ergonomic service operation at elevation.

Condition: excellent (used), functionality: fully functional, K+K BHVS 5000/12.5 Blanching Line Brand: K+K Model: BHVS 5000/12.5 Drum dimensions: 5000 x 1250 mm Overall dimensions: 8600 x 2300 x 4750 mm Power supply: Steam heating Nwedpfeyku Ivox Ac Aod The set includes: - Steel rotary discharge conveyor: 2900 x 500 mm - Machine chassis Without platform and stairs The K+K BHVS 5000/12.5 blanching line is a high-performance drum unit designed for the thermal processing of vegetables in industrial applications. The steam heating system ensures precise temperature control necessary for enzyme deactivation, improved texture, and preservation of the raw material's color. The robust 5000 mm drum guarantees adequate product retention time, while the integrated steel rotary discharge conveyor allows for smooth transfer of blanched goods to subsequent cooling or freezing sections.

Condition: excellent (used), functionality: fully functional, DTS Double Screw Blancher, Stainless Steel Brand: DTS Year of manufacture: 2004 Power supply: 400 V Technical specifications: - Steam-heated system - Operating pressure: 6 bar - Screw dimensions: approx. Ø 1200 x 5000 mm - Water capacity: 1x 4.41 m³ and 1x 3.39 m³ Discharge conveyor: - Steel, dimensions: 4800 x 500 mm Nwodpeyku D Djfx Ac Asd Total footprint: 8500 x 4300 mm Machine without platform, stairs, or grating floor The DTS double screw blancher set is an advanced processing unit made entirely of stainless steel, designed for the thermal treatment and conveying of food raw materials, especially potatoes and root vegetables. Featuring a high-pressure (6 bar) steam heating system and large operational capacity, this set is ideally suited for blanching, steaming, or pre-processing in high-throughput production lines. The use of two independent, large-diameter screws ensures accurate retention time control for the product, resulting in consistent processing quality while minimizing the risk of mechanical damage to the raw material.

Condition: new, Storage platform accessories (stairs, transfer station, handrail sluice, folding door) new: handrail lock: H1800 L1500 mm, H1800 L2300 mm, H1800 L3000 mm Folding door: beite 1500 mm 2000 mm If you need shelves or accessories in other compositions or other combinations or designs, please contact us. Nodofcrwyepfx Ac Aewd We offer a comprehensive range of new and used shelving units and accessories and accessories and are happy to assist you with your planning. An individual offer tailored to your needs is a matter of course for us. Further accessories like for example: Collision protection corners, ram protection walls, push-through protection, chipboards, gratings, depth bars are available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity the freight charges. Further service offers: Shelf assembly, maintenance, expansion, conversion, as well as repair. Dismantling, PURCHASE, recycling, disposal.

Condition: new, Available in all sizes, load capacity. I need the following information for the offer: -height, length, width -carrying capacity (kg/m2) -Floor: chipboard, grating -Stairs or other accessories? Accessories such as stairs, railings etc. can be supplied at extra cost. (prices on request) Nwedpfx Aofcu D Ioc Ajd Do you need shelves or accessories in other Compositions or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and will gladly support you in your planning. An offer tailored to your individual needs is a matter of course for us. Other accessories such as: Collision protection corners, impact protection walls, push-through protection, chipboard, Gratings, depth bars available. Shipping: Please inquire by indicating your postcode and location, as well as the desired item quantity. Further service offers: Shelf assembly, maintenance, extension, conversion and repair. Disassembly, PURCHASE, recycling, disposal.

Condition: like new (used), Year of construction: 2017, Prices from location dismantled, packed and loaded: Partial quantities can be purchased! We reserve the right to a minimum purchase! Manufacturer: Dexion Type: Hi280 Year of manufacture: 2017 Dimensions of shelves: 400x1,300 mm Height of shelves: approx. 4 cm Load per shelf: 80 kg/shelf Number of shelves: 15,400 pieces (some of which we have already sold) Number of frames: 1,653 pieces (some of which we have already sold) Condition: very good Available: immediately Location: Hungary/Budapest as a shelf platform: Floor area: approx. 2086 m2 Pedestrian level: 2,500 mm Stairs: 6 pieces Folding door (automatic): 6 pieces Platform load: 500 kg/m2 Rear wall grid: 800 m2 Nwsdpfx Acjm Dr Uve Aod Grid corridor: 1300 m2 Plan of the stage: upon request

Condition: like new (used), Year of construction: 2017, Price from location dismantled, packed and loaded: Partial quantities can be purchased! We reserve the right to a minimum purchase! Manufacturer: Profielnorm B.V. Type: storage platform Year of construction: 2017 Floor area: approx. 1440 m2 Platform load: for main and side corridor 500 kg/m2 for folding door 1000 kg/m2 Floor height (top edge of floor covering): 3.880 mm Bottom edge of beam: 3.530 mm Axle distance: according to drawing Platform covering: grid support Stairs: 6 pieces Njdsm Dr U Sopfx Ac Aswd Folding door (automatic): 6 pieces Condition: very good Available: immediately Location: Hungary/Budapest Plan of the stage: upon request

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross vehicle weight rating: 36,000 kg 202003-0071956-r_order-configur? * Maximum axle load: 24,000 kg * Maximum kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st/2nd axle: 1,310 mm * Axle spacing 2nd/3rd axle: 1,310 mm ----Axles & Running Gear 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control panel on the left before the axles * Axle function as lift axle, fully automatic via EBS * Including traction aid (3x brakes) * Radio remote control for lift axle ----Tyres & Wheels* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Bodywork Closed side walls left and right * Sliding partition wall (minimum ground clearance 100 mm) * Rear doors with external locking bars * One locking bar per door * Steel top rail, extendable left and right * Platform at front bulkhead * Ladder on front bulkhead left and right * Standard roof bows Ø 60.3 mm (4 pieces) * Bow space: 3 x approx. 4,100 mm * Curtain 680 g/m² (RAL 9006 White Aluminium) * Curtain supports 3-position (4 pieces) * Tensioning straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric operation * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Mounting Parts JOST landing gear with thrust compensation Nwodpfxsymhxge Ac Aod * Plastic toolbox left in front of axles (1,000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Contiguous side underrun protection * Swinging mudflaps * Antispray mat on 3rd axle * Long rear-mounted ladder with extendable stair and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulation * LED work lights at rear (radio-controlled) * LED work lights on landing gear (radio-controlled) * LED LCG-2 switch unit ----Hydraulics / Connections ISO-N and ISO-S plug + 15-pin connector * Knapen Trailers V1 radio remote control * Hydraulic connections centrally on front bulkhead (vertical) * Pressure line left, return line right * Additional hydraulic connections at landing gear * Brake connections present * Audible reversing alarm (manual setting) ----Paintwork Bodywork in RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, please feel free to contact me.

Condition: used, Year of construction: 2007, The SHARP double-table machining center with 6 or more interpolated axes has an extremely rigid gantry frame and is particularly suitable for the production of elements for chairs, furniture, tables, beds, shells, stair components and musical instruments. Nwjdpexxh Haefx Ac Aed • 4 motors of 9.6 kW each • Possibility of machining elements up to 145 cm wide and 200 cm long • Technically efficient machine with PITAGORA simulator and anti-collision program, AlpaCAM software and OSAI control • Year 2007, machine no. 445 • Dimensions that are needed in the hall to set it (building dimensions) - width 3.7 m (from the operator's side) x length (depth) x 4.9 m • Equipped with: a) 4 higher tables for attaching elements / beams b) 4 lower tables for attaching elements / beams c) vacuum pump d) bars with a length of 113 cm for vacuum / for mounting pressure / positioning cylinders - 4 items

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Nwsdpouzpiiefx Ac Asd

Condition: new, Year of construction: 2025, The Optimat BD150 Floor grinding machine is the perfect complement to the SDP750 sander. It is ideal for leveling sanding, sanding wooden surfaces, finishing and renovation work, as well as for stairs, corners and edges. Thanks to its compact size, it ensures precise sanding quality. The edge sander is equipped with a powerful motor and an integrated dust extraction system. The BD150 is suitable for Velcro and screw discs. The tiltable dust extraction pipe ensures that the dust bag is not damaged. Efficiency 5 m2/h Disc diameter 150 mm Engine speed 11,500 rpm Disc speed 3400/3700 ​​rpm Nwodpfx Acjtw Smvj Aod Power consumption 1.1 kW Length of long nozzle 481 mm Dimensions (L x W x H) 552 x 246 x 410 mm Weight (without cord) 10 kg Sound power level 80 dB(A)

Condition: used, machine/vehicle number: ZCF75D0302499507, mileage: 3,66,924 km, power: 132 kW (179.47 HP), first registration: 04/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, loading space length: 5,300 mm, loading space width: 2,040 mm, loading space height: 2,300 mm, Year of construction: 2007, Equipment: ABS, electric window regulation, = Additional options and accessories = - Stairs - Sun visor = Remarks = ZCF75D0302499507 = More information = Nwedpjymrcpsfx Ac Aod Front axle: Steering GVW: 7.500 kg