Used Stair Thrower for sale (218)

Condition: new, overall weight: 2,000 kg, empty load weight: 1,600 kg, maximum load weight: 400 kg, loading space length: 5,490 mm, loading space width: 2,290 mm, loading space height: 2,120 mm, tire size: 155r13c, Car trailer as a construction trailer for 12 people. The insulated *stay trailer* is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. An electric heater provides support in very cold weather. Self-sufficient thanks to WC in separate room with lockable door and storage room. The use of a crew trailer is possible on any construction site. As a normal *car trailer*, it can be driven to the construction site by a simple car. These vehicles are also used as *burro trailers*. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, extra room with outside door with chemical toilet and sink, storage room with door and shelf, stairs for hanging and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, Refrigerator, coffee machine, connection cable, 230V fuse box with RCD, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, four sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Dodpfxsqwi Nko Afpeun Accessories for construction trailers include a toilet room with toilet, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: new, overall weight: 1,300 kg, empty load weight: 940 kg, maximum load weight: 260 kg, loading space length: 3,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 6 people. The insulated *stay trailer* is suitable for all seasons. The 50 mm sandwich construction and 60 mm insulated floor keep out the heat and cold. The electric heating provides support in winter. A crew trailer can be used on any construction site. It is even easier to get to the construction site with such a *car trailer* as it can be driven to the construction site behind almost any car. It can also be used as a *burro trailer*. Our construction trailers have as standard an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs for 6 workers, shelf, window with safety cover, coat hooks, four stable crank supports, 230V power socket, stable frame and galvanized V-drawbar. Further technical details can be found below. Dodpsqwi H Nefx Afpoun Accessories for construction trailers include a toilet room with toilet, storage room, other sizes for up to 16 people, 100 km/h shock absorber and anti-theft device.

Condition: new, overall weight: 1,300 kg, empty load weight: 1,100 kg, maximum load weight: 200 kg, loading space length: 3,130 mm, loading space width: 2,167 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 4 people with toilet and storage. An insulated *team trailer* is suitable for all seasons. With a sandwich construction in 50 mm and 60 mm insulated floor, it can withstand heat and cold. In winter, the built-in heating provides support. To ensure that the replacement trailer is as self-sufficient as possible, it has a small built-in WC with chemical toilet. Duodpjqwi E Isfx Afpen The recreation trailer can be used on any construction site. It can easily be towed to the construction site with a car as a *car trailer* and can also be used as a *burro trailer*. The standard equipment of the construction trailer includes an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, ISO floor in 60mm, PVC aud floor, chemical toilet in a small toilet room with washbasin, storage room with outside door and shelf, refrigerator, coffee machine, window with safety cover, 230V fuse box with RCD, sockets, switch and interior light, table and chairs for 4, shelf, coat hooks, four sturdy crank supports, power socket for 230V, connection cable, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet with drain, other sizes for up to 16 people, 100 km/h shock absorber and trailer lock.

Condition: excellent (used), functionality: fully functional, mileage: 1,34,600 km, power: 115 kW (156.36 HP), first registration: 03/2006, fuel type: diesel, axle configuration: 4x2, brakes: other, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, airbag, differential lock, electric window regulation, truck registration, MOST PROMOSTAR.3 Promotion Mini Semi-Trailer Mercedes-Benz Sprinter 416 CDI with Semi-Trailer for Promotion/Event/Stage Use Fully wrapped in red / Original color: brilliant silver metallic 9744 MOST Special Vehicles MB 416cdi-P3 416 CDI 2,685 cm³ 160 HP (115 kW) 5-speed manual transmission Mini tractor unit 4x2 Differential lock ABS/ASR Dujdex Tuiyopfx Afpon Air conditioning Rear view camera 3 seats Bunk/sleeping area 195/70 R15C tires Air brake system for trailer MOST Special Vehicles PROMOSTAR 3 Semi-Trailer/Trailer 2-axle Right side can be opened Event/stage with lighting, stairs, and railing Front area with separate door and access via extendable stairs Additional tent Air-braked Stereo system/TV/HiFi 12V and 220V power supply 12V battery charger 2 axles with 195/50 R13C tires

Condition: excellent (used), functionality: fully functional, mileage: 1,34,600 km, power: 115 kW (156.36 HP), first registration: 03/2006, fuel type: diesel, axle configuration: 4x2, brakes: other, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, airbag, differential lock, electric window regulation, truck registration, MOST PROMOSTAR.3 Promotion Mini Semi-Trailer Mercedes-Benz Sprinter 416 CDI with Semi-Trailer for Promotion/Event/Stage Use Fully wrapped in red / Original color: brilliant silver metallic 9744 MOST Special Vehicles MB 416cdi-P3 416 CDI 2,685 cm³ 160 HP (115 kW) 5-speed manual transmission Mini tractor unit 4x2 Differential lock ABS/ASR Air conditioning Rear view camera 3 seats Bunk/sleeping area 195/70 R15C tires Air brake system for trailer MOST Special Vehicles PROMOSTAR 3 Semi-Trailer/Trailer 2-axle Dedpfex Tuigsx Afpjun Right side can be opened Event/stage with lighting, stairs, and railing Front area with separate door and access via extendable stairs Additional tent Air-braked Stereo system/TV/HiFi 12V and 220V power supply 12V battery charger 2 axles with 195/50 R13C tires

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern Duodpfx Afscti Diopsn -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 22 to 208 mm. -Material: -Heated steel: painted. -Scope of delivery: -includes 2x wooden boxes -Weight: 12 kg

Condition: good (used), Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step -Grating step: 1415 x 335 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized Dusdpfsrrzdxsx Afpsn -Quantity: 1 piece available -Weight: 18 kg

Condition: used, Year of construction: 2008, 5-Axis CNC Machining Center Used machine Year of manufacture: 2008 Condition: Still in production Features and technical specifications: CNC control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = +- 90 degrees C = +- 270 degrees HSD milling unit with 10 kW, liquid-cooled Stepless speed control up to 24,000 rpm Permanent grease lubrication Tool holder: HSK 63F 1 multi-spindle drilling unit with pneumatic pre-stroke, mounted on the milling unit. 16 individually selectable vertical drilling spindles 1 double horizontal drilling spindle in X-direction, and 1 identical in Y-direction Drill holders: each with 10 mm diameter Note: Maximum workpiece height machinable with drilling unit = 900 mm, referenced to X/Y spindle Milling and drilling units with dust extraction connection 200 mm diameter, each with pneumatic shut-off valve, combined connection to customer's extraction unit, 300 mm diameter Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 slots for tool diameters up to 90 mm or max. 160 mm with sorted placement, max. tool length 160 mm. One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 magazine positions. Special tool lengths up to max. 180 mm possible with corresponding reduction of working area. Maximum tool weight 6 kg (incl. HSK holder). Total magazine weight approx. 60 kg. Magazine positioned at the output side of the unit. Machine table: 8 support traverses, manually adjustable along machine length, each traverse with 1 retractable workpiece stop, fixed towards operator. Table surface can be divided into two clamping setups, per station: - 1 length stop, pneumatically adjustable (up/down) - 2 pneumatically adjustable glide rails (up/down) - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with intermediate tank, 250 liter capacity. 16 vacuum suction cups, 110 mm diameter Suction cup assortment for stair manufacturing incl. touch valve. 1 clamping device for posts/curved components Including chip conveyor Dujdpfjx Enqzsx Afpon Including NC-Hops 5 Wop system Including bumper safety device at front, and fence at side and rear Central lubrication Rated power: 21 kW Fuse protection: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201812185055532, Haitian Model / Type: JU8500 II Injection unit: 10600 Year of manufacture: 2018 Serial no.: 201812185055532 Connected load: 157 kW Clamping unit Clamping force: 1850 ton Dsdpex Stguofx Afpsun Tie bar spacing (H x V): 1650 x 1550 mm Min. mould height: 500 mm (750–150–100) Max. mould height: 1450 mm (1600–150) Centre ring adapter plate: 175 mm Core pulls: 4 Ejector Ejector force: 450 kN Injection unit Theoretical max. injection volume: 5227 cm³ Max. specific injection pressure: 2030 bar Screw diameter: 110 mm Screw type: Conventional, with mixing section Screw speed: 0–120 rpm Min. screw speed: 10.9 rpm Plasticising capacity (PS): 255 kg/h L/D ratio: 20 (reduced) Nozzle radius: R39 Hydraulic / oil Oil tank capacity: 1560 litres Nozzle / bedplate Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 94,000 kg Overall dimensions (L x W x H): 1450 x 965 x 360 cm Included Control system included Platforms and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 533 g 1D: 1066 g 2D: 2133 g Max. shot weight (3D): 3199 g Note Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201712075033692, Haitian Model / Type: JU7500/2 Plus Year of manufacture: 2018 Serial no.: 201712075033692 Clamping unit Clamping force: 750 ton Opening stroke: 900 mm Max. daylight: 2050 mm Tie bar spacing (H x V): 1110 x 960 mm Platen size: 1510 x 1440 mm Centre ring diameter: 200 mm Centre ring adapter plate: 175 mm Min. mould height: 450 mm Max. mould height: 1150 mm Open distance (open loopweg): 2050 mm Ejector Ejector stroke: 300 mm Ejector force: 195 kN Injection unit Theoretical max. injection volume: 2262 cm³ Max. shot weight in PS: 2058 g Max. specific injection pressure: 2200 bar Injection stroke: 450 mm Screw diameter: 80 mm Screw type: Conventional, with mixing section Screw speed: 0–145 rpm Min. screw speed: 15 rpm Plasticising capacity (PS): 255 kg/h Cylinder type: 5000 Hydraulic / electrical Hydraulic pressure: 210 bar Oil tank capacity: 1000 litres Power supply: 400 V Installed power: 86 kW Dsdpfsx Stfwjx Afpjun Nozzle / bedplate Nozzle radius: R39 Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 32 ton Overall dimensions (L x W x H): 970 x 510 x 270 cm Included Control system included Platform and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 205 g 1D: 410 g 2D: 820 g Max. shot weight (3D): 1230 g Note: Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 157403, clamping force: 12,000 kN, screw diameter: 135 mm, injection pressure: 6 bar, mold height (min.): 800 mm, Injection moulding machine Brand: ENGEL Model: Duo 16050/2300 Year: 2005 Serial no.: 157403 • Two-platen machine • Clamping force: 12,000 kN (2,300 tons) • Injection volume: 8,870 cm³ • Max. back pressure: 6 bar • Opening stroke: 3,000 mm • Mold installation height: min. 800 / max. 1,800 mm • Tie-bar spacing: 2,000 mm (horizontal) / 1,600 mm (vertical) • Platen size: 2,900 × 2,500 mm • Centre ring diameter: 380 / 250 / 175 mm • Centre ring adapter plate: 175 mm • Max. shot weight (PS): 7,983 g • Max. specific injection pressure: 1,980 bar • Screw diameter: 135 mm (conventional screw; optimised for PC) • Cylinder type: S13/M3 • Hydraulic pressure: adjustable up to 250 bar • Nozzle: radius R39; nozzle L380 – M98×6 • L/D ratio: 22 • Min. screw speed: 8.9 rpm • Power: 560 kW • Machine weight: 14,100 kg Shot weights (reference): • Min. shot weight (½D): 986 g • 1D: 1,971 g • 2D: 3,942 g • Max. shot weight (3D): 5,913 g   Included: • Control system • Roller feed system for mould placement • Platforms and stairs Duodpfx Afsx R Shuopjn • Impact/collision protection system Overall footprint (installation): approx. 15 m (L) × 9 m (W) × 365 cm (H) Note: Motan vacuum conveyor with cyclone separator is not included and must be removed (disconnect at the fill plate) and left on site. Moulds stored in steel storage racks are not included. 2 × Tool-Temp temperature control units, type TT-138N (24 kW cooling capacity, up to 85 kW max.) not included.

Condition: ready for operation (used), functionality: fully functional, Mixer is working disassembled lump breaker Dusdpfx Ajunkyzsfpen Side valve First photo is before the revision and disassembly. mixer is incl. control cabinet and platform with stairs.

Condition: new, functionality: fully functional, Year of construction: 2026, BEFARD XPR500 glass and sandwich panel vacuum suction cup Dusdpfx Aov I Tcvjfpon Maximum load capacity 500 kg 1 pc. suction plate 800x400 Remote contro l Single-circuit vacuum system Battery power supply Hook mounting bracket Transport trolley with wheels adapted for transport on stairs A choice of colors.

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 Duedpfx Asr Etulofpsn - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: excellent (used), functionality: fully functional, SELECT 33300 Drilling machine for wooden stairs. To drill the banister holes in string boards and hand rails. Dujdpfx Afsvl E Tbopjn The machine has a hydraulic feed regulation (no splintering of the holes) 400 VAC , 1,5 kW, 6 Bar. The drilling device can turn 60 Degree to the leftr and to the right. The drilling tool can be clamped by a collet. Line laser for positioning of the workpiece.

Year of construction: 2024, condition: new, For sale: drying system - 1T 184 TPR Model, (Mobile Conveyor Belt) We offer a high quality drying system, ideal for drying wood sawdust, produce, recyclable waste, food ingredients. Below we present the design details and features of the drying system: Design data: - Product handled: sawdust - Physical appearance:Loose - ˃ 1 mm - Initial moisture content: 55%, 50%, 40% - Final moisture content: 12% - Wet production: 4,00 t/h, 4,50 t/h, 5,65 t/h - Dry production: 2,05 t/h, 2,55 t/h, 3,85 t/h - Drying air temperature: 80 °C - Thermal energy consumed: 1.800 - 2.350 kWh - Max. evaporated water per hour: 1.800 - 1.955 Kg/h Installed electrical power: - Feeding cooker: 5,5 kW (x2) - Drying belt: 2,2 kW - Unloading equipment: 5,5 kW - Exhaust fans: 22,00 kW (x3) - Cleaning fans: 4 kW (x2) - Total installed power: Approx. 92.70 kW Water-to-air heat exchanger: - Recommended thermal capacity: 2.600 kW - Water temperature: 90 °C on - 70 °C off Dimensions: - External dimensions of dryer frame: Approx. 22 m long, 6 m wide - Drying belt surface: 72 m² - Unloading equipment: 5,500 mm x Ø 300 mm - Feeding trough: Approx. 1.00 m³ - Number of exhaust fans: 3 - Number of water-to-air heat exchangers: 4 Technical description: - Feeding system: Adjustable pulley conveyor with level sensor. - Drying table: Modular design with inspection windows. - Drying belt: Polyester fabric conveyor belt with steel rollers. - Thermal insulation: 50 mm thick rock wool with Magnelis® cladding. - Mixing brush: Painted steel mixing brush. - Base frame: Folded steel plates with reinforcing profiles. - Drying belt cleaning system: High pressure air and water spraying system. - Water spraying system: Closed circuit water spraying system. - Stairs and access: Secure access stairs and walkways. - Unloading equipment:Steel pulley unloader with motor. Duodpfx Afeua D U Ispen - Heat exchangers: High efficiency steel finned heat exchangers. - Air exhaust fan: Centrifugal fans with vibration damping connections. - Heat recovery: Hot air return duct. - Machine enclosure: Prefabricated enclosure made of insulated sandwich panels. - Dust filters: dust filters on the air intake grille. - Paint cycle: Phosphating, passivation, polyester powder coating. - Electrical control panel with PLC: SCHNEIDER electrical and PLC components, HMI control panel. - Humidity control system: PT 100 temperature sensors. - Remote service: direct connection via Internet. - Input and output humidity sensors: 4-20 mA adjustment. For further information and quotation please contact us! We look forward to your interest! Price: 530.000 Eur

Year of construction: 2014, condition: used, JetPetroClean container washing station Producer: OU Dontal, Estonia The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction Dujdpfxshgimdj Afpsn 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting.

Condition: excellent (used), Year of construction: 2004, type of input current: three-phase, input voltage: 400 V, total length: 4,700 mm, total height: 4,380 mm, total width: 4,220 mm, SALE OF AUTOMATIC PALLETIZER NOWAK NPS 1200 For sale: Automatic palletizer NOWAK NPS 1200, year of manufacture 2004, in very good technical condition, fully operational and in use until decommissioning. The machine is ideal for palletizing bags/packages in industrial automation systems. — Key machine information: • Model: NPS 1200 • Manufacturer: NOWAK Palettiersysteme GmbH • Capacity: up to 1,200 bags per hour (according to specification – page 1 of the documentation) • Compatible pallet types: • EURO pallets 800 × 1200 mm • Single-use pallets 800 × 1200 mm • Industrial pallets 1000 × 1200 mm (see page 1) — Dsdpfxsxwy Dhs Afpsun Equipment and modules included (according to page 2 of the documentation): • Empty pallet magazine – capacity: 12 pcs, automatic loading into pallet lift • Full pallet lift (up to 1,200 kg) with frequency inverter drive • Loading tables with V2A sheet covering, driven by synchronous belts • 3 × side presses for product layer centering • Scraper for product positioning on tables • Bag turner (90°–180°) with automatic adjustment • Indexing conveyor, width 1000 mm, length 1000 mm • Empty pallet conveyor 1800 mm and full pallet conveyor • Additional infeed conveyors – length 6000 mm • Operator platform and service stairs • Control panel on platform • Safety fencing with safety sensors, optical safety barriers Control cabinet includes: • Siemens S7 controller (CPU 315) • KTP 700 panel • SEW frequency inverters • New electrical sensors and wiring — Technical data (see page 3 of the documentation): • Length: 4700 mm • Width: 4220 mm • Height: 4380 mm • Power supply: 3 × 400 V, 50 Hz • Power consumption: approx. 18 kW • Conveyor height: standard 2900 mm • Pallet exit height: 550 mm • Color: Hammerschlag Malachite Green • Moving components: Yellow RAL 1023 — Condition: • Used, in very good, complete condition • Regularly serviced • Documentation and photos available upon request — Price To be agreed – please contact us for an offer.

Condition: excellent (used), Year of construction: 2014, IFE eddy current separators are used for separating non-ferrous metals (aluminium, copper, brass, etc.) from all types of bulk material. IFE eddy current separator, central system INP including discharge hood, feeder tray, support frame, and control unit. Working width: 2000 mm Rotational speed: 2500 rpm Main drive: 11 kW Conveyor drive: 2.2 kW Weight approx. 3200 kg Dimensions incl. discharge hood: L = 4300 mm W = 2900 mm incl. main drive H = 1250 mm incl. discharge hood IFE feeder tray, type: UE-1900x2000 F-2LM865T Working length = 2000 mm Working width = 1900 mm 2x vibration motors Dimensions LxWxH 2230 x 2200 x 1900 mm Weight approx. 1300 kg Support frame made of steel girders, platforms, stairs, discharge plate. Very well-maintained control cabinet with control system available. Machine available immediately. Dusdpfowxfqrjx Afpen

Condition: like new (used), Year of construction: 2013, Price plus VAT. TOP shelf rack system from Meta, used prepared for second floor, the system is currently located in Bremen and will be dismantled condition: very good dimensions: approx. 30.000 x 21.000 mm shelf load: 150kg bay load: 2100kg height ground floor: 2.550 mm height upper floor: 2.500 mm Shelf length: 1.300 mm Year of manufacture: end of 2013 Useful depth: 400 mm Duodpjk Eblcsfx Afpsn Storage platform and transfer area 500kg/m2 Ideal as small parts warehouse, used in the pharmaceutical industry shelving system incl. 4 x stairs and pallet transfer gate each floor with 6 shelf levels

Condition: good (used), Year of construction: 1997, functionality: fully functional, clear span: 19,000 mm, load capacity: 300 kg, For sale is a used Mecalux mezzanine storage system / multi-tier racking installation, consisting of frame racks with two walk-on mezzanine levels, stairs, and peripheral handrails. The system makes optimum use of the hall height and is ideal for carton storage, small parts storage, order picking, or light assembly work. Technical data: • Manufacturer: Mecalux • Year of manufacture: 1997 (per nameplate) • Type: 3-level racking system with 2 mezzanine floors • Footprint: approx. 19.0 m × 7.8 m ≈ 148 m² Levels / Surfaces • Ground floor (rack level): • Base area approx. 19.0 × 7.8 m (≈ 148 m² storage area) • Clear usable height below 1st mezzanine: approx. 3.10 m • 1st upper floor / 1st mezzanine: • Gross area approx. 19.0 × 7.8 m ≈ 148 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 142 m² • Clear headroom above: approx. 2.70 m, in areas with braces (approx. 0.50 m) approx. 2.30 m • 2nd upper floor / 2nd mezzanine: • Depth mostly approx. 5.90 m, width approx. 19.0 m • Gross area approx. 112 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 109 m² ➡️ Total usable area of both mezzanines: approx. 399 m² Stairs & Handrails • 2 × stairs, each • Width approx. 1.0 m Dsdpfxex Dtuao Afpeun • Length approx. 6.0 m • Stable steel steps with anti-slip markings • Handrails on both sides • Continuous handrails on the mezzanine levels • Additional safety by chains at access points Decking & Load Capacity • Mezzanine decking: robust wooden flooring / panel covering • Permissible load per nameplate: 300 kg/m² Lighting • Areas above the mezzanines are equipped with lighting, so the mezzanine levels are already illuminated. Condition • Very well-maintained, lightly used condition • Despite its 1997 year of manufacture, the system appears nearly as new • Mainly just dust on the floors, no visible structural damage to frames, handrails, or stairs • Nameplate present, data legible Location & Handling • Location: 59227 Ahlen • Availability: by arrangement, short-term possible • Viewing: possible by prior appointment Disassembly & Transport • Disassembly by the buyer. • Support with disassembly and loading can be arranged for an extra charge upon agreement. • Transport to be organized by the buyer.

Condition: used, mileage: 41,262 km, power: 125 kW (169.95 HP), first registration: 05/1993, overall weight: 9,000 kg, fuel type: diesel, color: green, gearing type: mechanical, loading space width: 2,330 mm, loading space length: 4,500 mm, loading space height: 1,920 mm, total length: 6,440 mm, total width: 2,500 mm, total height: 3,600 mm, number of seats: 2, Equipment: ABS, all wheel drive, parking heater, +++ H certificate as special purpose vehicle (SoKFZ) for office use possible +++ MB 917 with selectable all-wheel drive 4x4 and off-road reduction, 2 differential locks Insulated 4.6m police radio box body with real glass sliding windows, 2 staircases The box body is spring-mounted, allowing chassis torsion during off-road travel Additionally features a roof hatch as well as two exterior doors with retractable or folding stairs Dodpjvbnwujfx Afpoun External 220V power intake, second battery set, storage boxes Includes mobile 2 kVA generator on sliding tray The cab is equipped with individual seats; a center third seat can be retrofitted. Also features ABS and power steering, making the truck easy to drive Thanks to the long axle ratio, a top speed of 100 km/h (GPS) is achieved The vehicle has been continuously maintained and is immediately ready for use—the starter batteries are new It offers an excellent base for further conversion into a motorhome Box body interior dimensions: 4500 x 2330 x 1920 mm (LxWxH) Engine: OM 366. Manual 5-speed gearbox 714056 Wheelbase: 3640 mm Downrating to 7490 kg is possible; to achieve an unladen weight of 7.0 t, equipment must be removed accordingly Unladen weight without box interior and roof platform/roof storage box: approx. 6.2 t + 206 +

Condition: used, mileage: 2,52,625 km, power: 175 kW (237.93 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 8,280 kg, maximum load weight: 3,710 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 4,760 mm, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 18, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, spoiler, traction control, German vehicle, one owner, original mileage only 252,625 km. Ideal base for motorhome conversion, 50 mm insulation. Rear door with integrated stair access when opened, roof-mounted air conditioning unit KT 105, 110 km/h maximum speed. Condition as shown in photos. Prison van box body with 21 seats. Seat configuration: Box: 4 individual compartments, 1 compartment with five seats, 2 compartments with four seats each, 1 companion seat. Cab: 3 seats. Body dimensions: Length 6,700 mm x Width 2,300 mm x Height 1,950 mm. Roof hatch in box body. Cab with 3 seats, air conditioning, airbag, comfort driver's seat (air-suspended, with armrest), hill-start assist, central locking, electric windows, stability control, differential lock, roof hatch, onboard computer, ABS and ASR, 6-speed manual gearbox, reversing camera, roof spoiler, fog lamps, leaf and air suspension with raise/lower function, auxiliary headlights, storage box, intercom system, electric parking brake (EPB), heated electric mirrors, tinted windscreen, reinforced engine brake, daytime running lights, Brilliant Silver Metallic color, wheelbase: 4,820 mm, gross vehicle weight: 11,990 kg, unladen weight: 6,866 kg, payload: 5,124 kg. For commercial customers and export (both non-EU and EU), German Commercial Code applies. If a new TÜV inspection is required, we are happy to offer this through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV, SP, or UVV certificates. For more trucks, please visit our website. We speak the following languages: German, English, Polish, Turkish. Djdpfexl Sqiox Afpoun Note: We strongly recommend and offer viewing and inspection of vehicles to avoid misunderstandings about their condition and suitability. Viewings and inspections are possible by appointment at any time and are expressly desired. All information is provided without guarantee. No liability is assumed for errors or incorrect details in the listing. Buyers are obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2007, The SHARP double-table machining center with 6 or more interpolated axes has an extremely rigid gantry frame and is particularly suitable for the production of elements for chairs, furniture, tables, beds, shells, stair components and musical instruments. • 4 motors of 9.6 kW each • Possibility of machining elements up to 145 cm wide and 200 cm long Dodpfx Afjxxh Haopoun • Technically efficient machine with PITAGORA simulator and anti-collision program, AlpaCAM software and OSAI control • Year 2007, machine no. 445 • Dimensions that are needed in the hall to set it (building dimensions) - width 3.7 m (from the operator's side) x length (depth) x 4.9 m • Equipped with: a) 4 higher tables for attaching elements / beams b) 4 lower tables for attaching elements / beams c) vacuum pump d) bars with a length of 113 cm for vacuum / for mounting pressure / positioning cylinders - 4 items

Condition: used, Year of construction: 2021, axis stroke (X,Y,Z) 4062, 2,922,660 mm Number of spindle head vertical 13 St. Number of spindles head horizontal 6 St. Number of tools 27 St. Number of milling agregates 1 St. working dimensions 3200,1500,200 mm Motor output 12 kW control BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----- Workspace: X = 3200mm ; Y = 1500mm; Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible vertical drilling spindles in Y direction with 2 double horizontal drilling spindles in X direction and 1 double horizontal drilling spindle in Y direction Sawing unit integrated into the drill head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm grid spacing Linear 5-fold tool magazine for large tool diameters Original SCHMALZ tubeless work table. Console table with 6 traverses Workpiece lifting device Automatic tool length measuring device. Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm 1 piece Becker vacuum pump 100m3/h 1 piece chip conveyor belt Construction software Masterwork: 2D-Wop for standard application panel processing/interior construction, arches, doors Master 3D Level 2: for more complex processing, Optionally also expandable for 5-axis fully interpolating Prepared for the use of solid wood tensioners (round arches), Tensioner offered as an option if needed later Technology according to the enclosed, detailed description ----- Total price in this version from the Oberkochen warehouse: on request! ----- Freight and commissioning on request! Options for frame production/round arch with additional costs: ----- Reference ring for holding chip guide elements on 5-axis electrospindles with HSK 63F mounts: 410.00 euros Dusdpfxexmk Ato Afpsn Basic kit for clamping arch elements - 6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros (technical information according to the manufacturer - no guarantee!) Chip guide elements, price per piece: 460.00 euros All prices mentioned are net, plus tax. (technical information according to the manufacturer - no guarantee!)