Used Stair Thrower for sale (217)

Year of construction: 2022, condition: as good as new (ex-display), New 4 kW screwcompressor FirstAir Type: FAS4 Year of construction: 2022 technical spezifications: operating pressures of the system: 10 bar(ue) at 10 bar : 470 l/min Installed power: 4 kW speed drive motor: 2900 1/min SProtection class / Insulation class Drive motor: IP55 / F Ffedpeix Akzefx Afpju Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 65 +/- 3 Compressed air connection:G 1/2" Length : 660 mm Width : 600 mm Height : 890 mm Weight : 230 kg Visit our store !

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0044_SN0056019, New 4 kW screw compressor FirstAir with integrated refrigeration dryer and 200 liter compressed air tank Fedpfx Ajfcrz Hsfpsfu and time-controlled steam trap Type: FAS4-200AT Year of construction: 2022 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 470 liters / min Installed motor power: 4 kW Protection class / insulation class drive motor: IP 55 F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 65 +/- 3 Compressed air connection: G 1/2 " Length: 1500 mm Width: 700 mm Height: 1550 mm Weight: 435 kg Drive: V-belt drive Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have Ffedpfevnr Rrjx Afpeu scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. Fsdpfx Afsvntb Sspofu This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Ffodsvntmnepfx Afpju Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides Fedpfjrg Ivbsx Afpofu -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available Fjdpfx Aoikwgnefpofu -Dimensions: 650/980/H210 mm -Weight: 14 kg

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, 1.10 m high, with knee and toe board. Platform depth: 800 mm Fodpfx Afsyctvcspjfu Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel configuration: 2 fixed castors Platform height: 1660 mm Incl. platform with 7 steps Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: new, Year of construction: 2026, Universal solid wood boring machine with stepless turnable drilling unit for universal applications like e.g. staircases, entry doors, windows, winter gardens as well as useable as horizontal mortiser. Short introduction: • Universal application: staircases, frames, entry doors, windows, winter gardens as well as useable as horizontal mortiser, ... • Steppless turnable drilling unit: 65° - 0 - 65° • Drilling depth up to 200 mm (larger drilling depths optional) • Position height adjustment for 2 levels, pneumatically, 0 - 100 mm • Drilling in two levels through pneumatic raising and lowering of the drilling motor at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) Ffodpfx Aedx R E Tsfpeu • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: good (used), Year of construction: 2018, 2x Emergency Staircases, galvanized, approx. 10.70 m high with 3 landings for emergency exits at heights of 3.20 m, 6.40 m, and 9.60 m – used – : Price per unit ex-location: €12,500 (net), dismantled, packed, and loaded! Manufacturer: unknown Year of construction: 2018 Dimensions approx.: Footprint dimensions: 4.87 m x 2.68 m Height: approx. 10.70 m Suitable for 3 emergency exits Landing heights: 1: approx. 3.20 m 2: approx. 6.40 m 3: approx. 9.60 m With emergency door that can only be opened from inside and a three-sided fence at the bottom Each stair tower is founded on frontally arranged foundation beams with a cross-sectional width of 0.80 m and a height of 1.00 m. The embedding depth of the foundation beams is specified at 0.80 m. For anchoring, expansion bolts from HILTI are used. For stair treads and platform coverings, grating and steps from Meiser, type P-Grating 33x33, bearing bar 40/3 are used. Wind load zone: 2 Fjdpfx Ajxvh Hnofpjfu Snow load zone: 2 Seismic zone: 2 Condition: good Available: from approx. January 2026, possibly earlier Location: Euskirchen

Condition: used, functionality: fully functional, Hymer Aluminium Stairway Bridge. The stairway bridge from Hymer is practical and robust. It offers easy handling and ensures safe ascent and descent. The durable design guarantees longevity and reliability in every application. The stairway bridge is already packaged (see images) and ready for shipment. Packing dimensions: 250x100 cm Technical data: • Number of steps: 5 steps • Step width: 60 cm Ffjdpfx Afew Nhkbepsu • Lower platform height: 116 cm • Platform length: 128 cm • Platform width: 65 cm • Max. load capacity: 150 kg per m³ • Material: aluminium • Total weight: approx. 95 kg • Packing dimensions: 250 x 100 cm

Condition: used, functionality: fully functional, Euroline Aluminium Stair Bridge The Hymer stair bridge stands out for its practicality and stability. It allows for straightforward use and ensures safe entry and exit. The robust design guarantees durability and reliability for every application. The stair bridge is already packaged (see pictures) and ready for shipping. Packaging dimensions: 300x140 cm Technical data: • Number of steps: 5 steps • Step dimensions: 80 x 24 cm • Height to lower landing: 131 cm • Platform length: 260 cm • Platform width: 80 cm • Maximum load capacity: 300 kg • Material: aluminium • Total weight: approx. 150 kg Fedpfow Nhmcex Afpofu • Packaging dimensions: 300 x 140 cm

Condition: used, functionality: fully functional, Aluminium staircase bridge The staircase bridge stands out with its ease of operation and sturdy construction. It ensures straightforward use and safe access both up and down. The robust design guarantees durability and reliability with every application. The staircase bridge is already packed (see pictures) and ready for shipment. Packing dimensions: 270 x 130 cm Technical specifications: • Number of steps: 5 Ffodpfxsw Nhn He Afpju • Material: Aluminium • Total weight: approx. 140 kg • Packing dimensions: 270 x 130 cm

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other variants on request - 5 tiers - clamping depth 1050 mm - 1 pressure beam -1500 mm long, 60 mm high, per tier - 3 infinitely adjustable pendulum counter bearings, 400 mm long, per tier Ffodpfx Afegu D Rmepeu - 2 hold-downs with handwheel, per tier - 5 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 1600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: new, Year of construction: 2018, Thyssenkrupp Velino xtra Escalator Escalator Description Manufacturer: Thyssenkrupp Model: Velino xtra FT 923 Type: 5 EK 30 Fodpfjw Hcvusx Afpefu Year of Construction: 2018 General: Travel height: 4.129 m Step width: 1.000 m Step length: 0.203 m Handrail length: 2 x 24.967 m Nominal speed: 0.5 m/s Incline angle: 30°C Number of steps that can be used simultaneously: 24 Total number of steps: 58 Safety features: Start-up switch, up/down, top, bottom Emergency stop switch, top + bottom Handrail retraction switch, right + left, top + bottom Chain tension monitoring switch, right + left Speed monitoring Phase control device Control cut-out switch, top + Below Thermal motor protection switch Brake function monitoring Handrail speed monitoring Fault step monitoring Cover plate switch Drive: Single drive with duplex chain reduction Motor make: emod Motor type: 5CNR112L/4-20 Motor power: 7.5 kW Rated speed: 1500 rpm Connection voltage: 230/400 V Gearbox type: auma FTS 125 worm gear Covering: Interior: Glass balustrade Exterior: Galvanized sheet steel The escalator was manufactured in 2018 and has never been used. Item location: Bottrop Availability: 4 units Disassembly and removal by buyer. Disassembly by us is also possible for an additional charge. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 x rows of rod lashing rails, 14 x lashing eyes in the floor, walls lined with felt, 1 x interior light, pull-out galvanized stairs approx. 700 mm wide, rear, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fedpoyg Dnqjfx Afpsfu

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the inclined beam - Hydraulic cylinder, laterally mounted on ball bearings, adjustable, 120 mm stroke - Combined and individual cylinder control Scope of delivery: Ffedpeygwp Uofx Afpeu Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders individually lockable, 1 cylinder for pressure beam adjustment, control panel for two operations, pressure gauge and regulator, hydraulic unit, oil tank, and hoses, - 220/380 Volt, - Press width 1800 mm - Press height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg

Condition: used, empty load weight: 3,080 kg, maximum load weight: 6,920 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 11/2020, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 2 x rows of rod lashing rails, 14 x lashing eyes in the floor, walls lined with felt, 1 x interior light, pull-out galvanized stairs approx. 700 mm wide, rear, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fjdpfxjyf Dfge Afpefu

Condition: excellent (used), Year of construction: 2012, CNC Drilling Machine SCM Morbidelli Uniflex HP - Precision and Efficiency in Woodworking We offer for sale a used CNC drilling machine SCM Morbidelli Uniflex HP from 2012. This technologically advanced device is ideal for precise and efficient drilling in wood and wood-based materials. Fsdpfx Asv Ezfyjfpjfu The SCM Morbidelli Uniflex HP is an excellent solution for manufacturers of furniture, stairs, interior design elements, and companies involved in large-scale woodworking. Key Parameters and Features of the SCM Morbidelli Uniflex HP CNC Drilling Machine: ● Manufacturer: SCM Group ● Model: Morbidelli Uniflex HP ● Type: CNC Drilling Machine ● Year of Production: 2012 ● Condition: Used ● Working Area: ○ X: 3000 mm ○ Y: 1300 mm ○ Z: 80 mm ● Number of Separate Aggregates: 4 ● Drills: ○ Vertical: 96 ○ Horizontal X: 32 ○ Horizontal Y: 8 Additional Information: ● The machine is fully functional and ready for work. ● Possibility to view and test the machine. Keywords: CNC drilling machine, SCM Morbidelli Uniflex HP, CNC drilling, woodworking, wood machines, SCM Group, Morbidelli, CNC drill, furniture manufacturing. Please contact us for detailed information and to arrange a visit.

Condition: ready for operation (used), Year of construction: 2001, A fully equipped Zeiss coordinate measuring machine with various accessories and software licenses is available. Measuring dimensions X/Y/Z: 3000mm/1600mm/1000mm, probe head: Zeiss VAST, probe system type: VAST, software: Calypso 2023 ServicePack1_Version 7.6.04, operating hours: approx. 70914h. Machine dimensions X/Y/Z: approx. 4150mm/2450mm/3850mm, weight: approx. 12500kg. Including Zeiss air filter unit, probe rack, reference probe, 8x probe systems, calibration sphere, stand, consoles and stair platform. License transfer possible. Documentation available. On-site inspection is possible. Ffjdpfxoyhgm Es Afpsu

Condition: new, Storage platform accessories (stairs, transfer station, handrail sluice, folding door) new: handrail lock: H1800 L1500 mm, H1800 L2300 mm, H1800 L3000 mm Folding door: beite 1500 mm 2000 mm If you need shelves or accessories in other compositions or other combinations or designs, please contact us. We offer a comprehensive range of new and used shelving units and accessories Fedofcrwyepfx Afpsfu and accessories and are happy to assist you with your planning. An individual offer tailored to your needs is a matter of course for us. Further accessories like for example: Collision protection corners, ram protection walls, push-through protection, chipboards, gratings, depth bars are available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity the freight charges. Further service offers: Shelf assembly, maintenance, expansion, conversion, as well as repair. Dismantling, PURCHASE, recycling, disposal.

Condition: new, Available in all sizes, load capacity. I need the following information for the offer: -height, length, width -carrying capacity (kg/m2) -Floor: chipboard, grating -Stairs or other accessories? Accessories such as stairs, railings etc. can be supplied at extra cost. (prices on request) Do you need shelves or accessories in other Fsdpefcu D Iofx Afpefu Compositions or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and will gladly support you in your planning. An offer tailored to your individual needs is a matter of course for us. Other accessories such as: Collision protection corners, impact protection walls, push-through protection, chipboard, Gratings, depth bars available. Shipping: Please inquire by indicating your postcode and location, as well as the desired item quantity. Further service offers: Shelf assembly, maintenance, extension, conversion and repair. Disassembly, PURCHASE, recycling, disposal.

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Ffedpfx Afjuzpiijpeu

Condition: like new (used), Year of construction: 2017, Prices from location dismantled, packed and loaded: Partial quantities can be purchased! We reserve the right to a minimum purchase! Manufacturer: Dexion Type: Hi280 Year of manufacture: 2017 Dimensions of shelves: 400x1,300 mm Height of shelves: approx. 4 cm Load per shelf: 80 kg/shelf Number of shelves: 15,400 pieces (some of which we have already sold) Number of frames: 1,653 pieces (some of which we have already sold) Condition: very good Available: immediately Location: Hungary/Budapest as a shelf platform: Ffsdem Dr Uvjpfx Afpsu Floor area: approx. 2086 m2 Pedestrian level: 2,500 mm Stairs: 6 pieces Folding door (automatic): 6 pieces Platform load: 500 kg/m2 Rear wall grid: 800 m2 Grid corridor: 1300 m2 Plan of the stage: upon request

Condition: like new (used), Year of construction: 2017, Price from location dismantled, packed and loaded: Partial quantities can be purchased! We reserve the right to a minimum purchase! Manufacturer: Profielnorm B.V. Type: storage platform Year of construction: 2017 Floor area: approx. 1440 m2 Platform load: for main and side corridor 500 kg/m2 for folding door 1000 kg/m2 Ffedpfx Afsm Dr U Sopeu Floor height (top edge of floor covering): 3.880 mm Bottom edge of beam: 3.530 mm Axle distance: according to drawing Platform covering: grid support Stairs: 6 pieces Folding door (automatic): 6 pieces Condition: very good Available: immediately Location: Hungary/Budapest Plan of the stage: upon request