Used Steam Condenser for sale (1,722)

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Bjdpoz Dv Uyefx Aknjww Immediately. Location: Serbia.

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Bodoz E R Dxspfx Aknoww Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Bsdpsz E Dfcjfx Aknsww

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Bwjdpoz E Dlvefx Aknjw

Condition: excellent (used), 091 USED Miwe Thermo-Static thermal oil ovens. EQUIPMENT: - 4 thermal oil ovens, 10 levels (height between shelves: 17 cm) - heating boiler - gas burner - 60x80 cm trolleys - 40 pieces - chimneys - steaming: each oven has its own steaming system Year of production: 2 ovens 2003, 2 ovens 2008 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Bsdpfxjzx Hd Dj Aknsww Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 648 kW (881.03 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,000 kg, input voltage: 400 V, total width: 2,300 mm, total length: 7,000 mm, total height: 2,600 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE RTAC 185 648 KW Cooling capacity: 648.0 kW / 184.25 tons (12/7 — 35°C) Year of manufacture: 2009 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. Trane CHHP0N2TKG0N134A (screw) + 1 pcs. Trane CHHP0N1TKG0N112A (screw) Type of refrigerant: R134a Number of fans: 13 pcs. Dimensions: 7x2.30x2.6 m Weight: 6000 kg Working hours: 8934/6574 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Bwodpfxjz Ducpo Aknew WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), functionality: fully functional, number of ink cartridges: 4, color channels: 4, number of print heads: 5, resolution (max.): 1,200 dpi, number of feeding trays: 1, total length: 6,000 mm, total width: 2,255 mm, total height: 1,600 mm, space requirement length: 10,000 mm, space requirement width: 5,255 mm, type of input current: AC, input current: 32 A, input voltage: 400 V, Equipment: documentation/manual, raster image processor, Konica Minolta PKG-1300 – single-pass inkjet printer for corrugated board (demo unit) Demo unit, fully functional, used only for testing. Price includes a new set of 5 printheads (boxed, unused). Videos of the machine in operation available on request. The machine can be inspected and tested in person. The Konica Minolta PKG-1300 (manufactured by MTEX NS as NS Multi 1300) is an industrial single-pass digital packaging printer offering high print quality, automated feeding and stacking, and efficient production of short and personalized runs. It prints on flat and pre-die-cut corrugated boards as well as folding carton. It is ideal for printing houses, packaging manufacturers and companies looking for a flexible solution for printing on cardboard. Applications: shipping boxes, e-commerce and food delivery boxes, gift and custom boxes, promotional and display packaging, prototypes, short and personalized runs for e-commerce, FMCG and private labels. Benefits: on-demand printing, packaging personalization, fast turnaround of short runs, reduced prepress and production costs. Printer: Technology: single-pass inkjet, 5 HP PageWide printheads, water-based CMYK pigment inks (5-litre tanks) Resolution: 1200 × 1200 dpi; 600 × 1200 dpi; 300 × 1200 dpi; drop size 5 pL Print speed: 9 m/min (high resolution), 18 m/min (medium), 27 m/min (low) Max. imaging width: 1070 mm Media: flat and pre-die-cut corrugated boards, 1–50 mm thick Media size: min. 300 × 400 mm, max. 1300 × 1600 mm (W × L) Dimensions (H × W × D): 1600 × 2255 × 1250 mm, weight 1200 kg Automatic feeder Feeding speed up to 27 m/min, max. feed stack height 400 mm Dimensions (H × W × D): 1360 × 2255 × 1600 mm, weight 750 kg Exit table with hot-air dryer Dimensions (H × W × D): 950 × 2255 × 600 mm, weight 300 kg Automatic stacker: Stacking speed up to 27 m/min, max. stack height 700 mm Bedpjz R S Acjfx Aknjww Dimensions (H × W × D): 1310 × 2255 × 1990 mm, weight 1150 kg Key features: Head cleaning with individual selection of printheads and colour channels Multiple media sensors across the width for flexible media placement 5-belt vacuum transport with individually switchable air flow and adjustable suction Printhead protection roll against media impacts Ionizing media cleaning system to reduce dust and extend printhead life Power and utilities: Single power connection for the complete system: 400 V, 3-phase, 50 Hz, 32 A Power consumption: printer 8000 W, web cleaner 5500 W, feeder 3500 W, stacker 3500 W Feeder and stacker each require RCCB 4P, 40 A, 300 mA, C, 10 kA (customer side) Compressed air: 6 bar, 50 l/min, 8 mm OD hose (customer side) Software: PC/Windows (PC included), PKG-1300 user interface, Ergosoft RIP. Internet connection required 24/7. Operating environment: 20–30 °C, 50–70% RH (non-condensing). Footprint: approx. 2200 × 6000 mm (W × L) plus vacuum cabinet. Recommended clearance: 2000 mm front, back and left side, 1000 mm right side. Delivery: shipped on original pallets. Assistance in arranging transport is available. A forklift is required for unloading. Terms: wholesale offer, sold without warranty. Price negotiable.

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Bsdpfx Akjz S Idkonjww Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm Bodpfx Aks Aawxxjnoww with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield)

Condition: used, functionality: fully functional, Year of construction: 2006, Upper heating and pasteurization tank Lower cooling and churning cylinder Maximum capacity per cycle: 10 L Batch size per cycle: 4 to 8 kg Indicative hourly production: 40 to 60 L/h 17 manufacturing programs Heating, cooking and pasteurization Cooling and churning of preparations Upper tank with transparent lid Lower cylinder with direct expansion Multiple refrigerant injection Executive electronic control LCD screen and digital displays Controls for the hot and cold sections Front extraction of preparations Stainless steel exterior cladding Water-cooled condenser Power supply: 400 V / 50 Hz / three-phase Rated electrical power: 10.10 kW Announced protection rating: IP22 Dimensions (L x D x H): 650 x 1200 x 1410 mm Weight: 330 kg Used BRAVO Trittico 610 Executive pasteurizer and ice cream churning machine – Multifunction production General presentation The used BRAVO Trittico 610 Executive is a professional combination unit that combines the functions of a pasteurizer and an ice cream churning machine in a single machine. Designed for artisanal ice cream makers, pastry chefs and chocolatiers, it allows for heating, pasteurizing, cooling and churning of various preparations. With a maximum capacity of 10 L per cycle and an indicative hourly production of 40 to 60 L, this equipment combines a thermal preparation tank and a cooling cylinder. Its Executive control system facilitates the management of operations and the adaptation of cycles to professional recipes. Why this model stands out The Trittico 610 Executive combines two manufacturing steps usually performed by separate equipment. The upper tank accommodates the ingredients for heating, mixing and pasteurization operations. The lower cylinder then ensures the cooling and churning of the preparations. This 2-in-1 configuration limits the handling between machines and facilitates the organization of production in an ice cream or pastry laboratory. The Executive electronic control has dedicated programs for the different preparations, with a central display and separate controls for the hot and cold sections. Key advantages Dual function: pasteurization and churning Upper tank dedicated to heating and cooking Lower cylinder for cooling and churning Capacity of 4 to 8 kg of mixture per cycle Bwjdpfxs Aa Axws Aknsw Maximum announced production of 10 L per cycle Indicative hourly production of 40 to 60 L Executive control with manufacturing programs Electronic display and control buttons Front extraction of preparations Stainless steel exterior construction Applications in ice cream making, pastry and chocolate making

Year of construction: 2019, condition: used, Venus ARTAS IX System – Robotic Hair Transplantation Technology – Hair Restoration Used, from business liquidation Technology, data, and information according to the manufacturer: Improves hair loss in the frontal area of the scalp, as well as in the temples Hair can be precisely, efficiently, and repeatedly extracted and transplanted to multiple other locations simultaneously Touchscreen user interface Random selection of hairs from the transplantation area ensures high-quality grafts and natural-looking results 7-axis KUKA robotic arm enables highly precise and efficient movements with a repeatability of 0.1 mm Technical specifications of the device: Length: 86.36 cm (34 inches) Width: 58.42 cm (23 inches) Height with robotic arm: 149.86 cm (59 inches) Weight of the cart: 181 kg (400 lbs) (181.437 kg) Electrical data: 100–240 V AC, single-phase, 50/60 Hz, 15 A Continuous operation: Yes Vacuum: 20.00 ≤ Vacuum [in-Hg] ≤ 30.40 Connection: Ethernet FDA classification: Class II Warranty: 1-year manufacturer's warranty Power connection: Detachable power cable Water protection: IPX0 (normal, unprotected device) Device type B: Enclosure Bsdpfj Abycpex Aknoww Temperature: Operating: 15 °C to 30 °C Storage: 0 °C to 50 °C Humidity: Operating: 20 % to 80 % (non-condensing) Storage: 0 % to 90 % (non-condensing) Atmospheric pressure: max. 416 kPa abs Operating mode: Continuous, according to IEC 60601-1. We recommend an inspection Sale is expressly subject to the exclusion of any material defects No guarantee or warranty Information without guarantee Details, information, and technical data from the manufacturer To prevent any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment arrangement. Subject to prior sale, changes, errors, and printing errors

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,472 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, controller model: NGC, table load: 680 kg, overall weight: 3,810 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3-axis HAAS VF-2SSYT was manufactured in 2022. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 914 x 457 mm and a maximum table load of 680 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SSYT vertical machining centre we have for sale. Contact us for further details. • CNC control: Haas Next Generation Control (NGC) • 1 GB program memory, 15" LCD • USB, Ethernet, Wi‑Fi • HaasConnect remote monitoring • VNC, DPRNT support • Early power‑failure detection, program restart from any block • Run Stop Jog Continue, SafeRun collision mitigation • Electronic handwheel, memory lock • Fourth-axis readiness: • VF‑YT 4th‑axis preparation • 4AXD: 4th‑axis drive, connections, and wiring • Note: Rotary table not included • Software options: • DWO/TCPC (Dynamic Work Offsets & Tool Center Point Control) • HSM (High‑Speed Machining with look‑ahead) • Probing cycles and SO, MACRO, COORD, VPS functions • Axis travels and feeds: • Spindle nose to table: 102–610 mm • Rapids X/Y/Z: 35.6 m/min • Max cutting feed: 21.2 m/min • Max thrust X/Y: 8.87 kN; Z: 13.7 kN • Worktable: • 914 × 457 mm • T‑slot table, 16 mm slots, 125 mm spacing • Spindle: • Direct drive, spindle cooling, taper air blast • Rigid tapping • Tool changer: • Side‑mounted ATC, 30 + 1 tools • Max tool Ø (all pockets): 63.5 mm • Max tool Ø (adjacent empty): 127 mm • Tool‑to‑tool: 1.8 s; chip‑to‑chip: 2.4 s • Accuracy: • Positioning ±0.005 mm; repeatability ±0.003 mm • Ballscrew thermal compensation • Coolant and probing (integrated options): • P‑COOL: Programmable coolant nozzle • TSC: Through‑spindle coolant 21 bar, 22 l/min • WIPS‑R: Wireless workpiece and tool probing system • Machine features: • Fully enclosed machining area (sliding front doors, hinged side windows) • Coolant system with pull‑out tank • Automatic central lubrication • Compressed‑air connection • Machine work light Additional equipment • AUGER: Screw‑type chip conveyor Bwjdps Abap Nsfx Aknsw • ACF: Auxiliary coolant filtration system, 25 µm • COOLANT MAINT PACK: Coolant maintenance package • COOLANT REFILL: Automatic coolant replenishment system (requires external water supply) • Enclosure mist extraction / mist condenser (as supplied) • OIL‑SKIMMER: Coolant tank oil skimmer • CHIP STRAINER: Mesh filter and metal chip basket set • LK: Machine lifting kit with lifting accessories and brackets Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2003, Overview This KKT Kraus KLC 126 N is an air-cooled industrial chiller, built in 2003. It runs on refrigerant R407C, with the condenser fans on top and the control cabinet built into one end face. It served a Krones Contiform S24 blow moulder and was in production until March 2026. Dismantled in October 2026, it is now stored and ready for loading. Bwsdoz Sp Nhopfx Aknjw Technical data - Manufacturer: KKT Kraus - Model: KLC 126 N - Year of manufacture: 2003 - Machine type: air-cooled chiller - Refrigerant: R407C, max. filling weight 43.5 kg - Max. operating pressure: 28 bar - Power supply: 400 V, 3 phases, 50 Hz - Max. power input: 64 kW - Max. current consumption: 118 A - Main fuse: 160 A - CE marked Equipment - Air-cooled condenser with axial fans on top of the housing - Integrated control cabinet with digital temperature controller, indicator lamps, selector switch and main switch - Pipe connections on the end face opposite the control cabinet - Enclosed steel housing Condition Used chiller from 2003, in production until March 2026. Dismantled in October 2026 and stored. Availability Available immediately. Location: Germany.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,180 h, total height: 1,070 mm, total width: 1,120 mm, overall weight: 211 kg, travel distance X-axis: 294 mm, travel distance Y-axis: 211 mm, travel distance Z-axis: 144 mm, product length (max.): 740 mm, number of axes: 3, This 3-axis 3DSYSTEMS ProJet MJP 2500 Plus was manufactured in 2019. It features a build volume of 294 x 211 x 144 mm and a build material capacity of 352.4 kg. The printer is equipped with the MJP EasyClean System for automatic support material removal. If you are looking to get high-quality 3D printing capabilities, consider the 3DSYSTEMS ProJet MJP 2500 Plus machine we have for sale. Contact us for further details. Bedpfsz U Ap Hjx Aknjww - Machine Dimensions: 112 x 74 x 107 cm - Machine Weight: 211 kg - Voltage: 100 - 240V~ - Frequency: 50/60 Hz - Phase: 1 PH - Current: 12 - 9.5A - Software: 2 lifetime 3D Sprint licenses - Included Platforms: 2 print platforms - Included Accessories: MJP EasyClean System (steam bath for automatic removal of support material)

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Bwsdpfjz Smkwex Aknsw Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) Bedpfx Aezy Dziekneww - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Bodpjwiatiofx Aknsww Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Year of construction: 2023, condition: used, New demonstration machine! List price €1,999 net. Maximum, robust equipment and the best quality at an attractive price. Fully automatic on/off operation. Equipped with all safety devices. Completely ready for connection. High-quality electric motor with high starting torque is equipped with a motor protection switch. Starting capacitor and starting relief valve ensure easy starting. Standard equipped with a phase inverter for easy manual reversal of the direction of rotation. Compressed air generation via a high-performance HOS unit. The starting relief valve ensures easy and pressure-free starting. The two-cylinder high-performance unit made of cast iron and the low speed guarantee particularly smooth and low-vibration operation and a long service life. This ensures an even longer service life due to even less wear. High-quality compressor with optimal lubrication for a long service life and high reliability. Equipped with a high-quality intake filter. The aftercooler with large cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, which protects the pneumatic tools. Additionally equipped with an intercooler to the aftercooler. Corrosion-free valve plates for improved heat dissipation and durability of the compressor. The large fan wheel and a cooling air deflector on the cylinder ensure optimal cooling of the compressor. A stable metal belt guard provides optimal protection of the components and high user safety. Compressed air supply to the tank via a flexible armored hose with heat protection prevents vibrational breakage. Powerful and efficient drive. The toothed drive belt facilitates starting, improves smooth running and power transmission, and reduces power consumption by up to 30%. Stable metal belt guard. Operation at the service unit. Equipped with a high-quality CONDOR pressure switch MDR 5 with a robust push-button function for fully automatic on/off operation. Filter pressure regulator for stepless adjustment of the working pressure, while simultaneously separating dirt, oil and condensate. Two large manometers indicate the tank and working pressure. Air outlet at the service unit via a comfortable safety quick coupling. Only fixed screw connections at the service unit, no hose connections. Two compressed air outlets. One compressed air outlet for filtered compressed air. One compressed air outlet via a direct outlet on the tank with a ball valve. Comfortable safety coupling - the advantages. Comfortable safety couplings from AIRCRAFT, the first manufacturer to use them as standard. Two separate locking systems for maximum work safety. Prevents dangerous whipping of the hose line. Comfortable and safe to transport and set up. Ergonomically extended handle for comfortable transport in an almost upright position - lifting stress on the back is avoided. Puncture-proof PU foam wheels and a stable steering chassis with parking brake enable easy transport. The parking brake prevents both rotational and rolling movement of the wheels and ensures an optimal position of the compressor. With a practical second transport handle on the tank, which makes it easier to carry the compressor. Technical data: Intake capacity approx. 850 l/min. Filling capacity approx. 680 l/min. Maximum pressure 10 bar. Tank capacity 100 l. Number of compression stages 2. Compressor speed 1240 min-1. Sound power level Lw 95 dB. Bsdpj Agch Eofx Aknjww

Condition: new, Year of construction: 2026, machine/vehicle number: 1.2457.1, New compressed air refrigeration dryer KAESER TA11 with energy-saving SECOTEC control. Bwsdpfx Ake Af Smaonew with electronically controlled condensate drain with cold storage Year of construction: 2026 Technical data: Flow rate: 1.25 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to + 43°C max. Compressed air inlet temperature: + 55° C Compressed air connection: G 3/4" Dimension (W x D x H): 630 x 484 x 779 mm Weight: 85kg electrical supply: 230 V / 1 / 50 Hz Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: used, mileage: 35,834 km, power: 107 kW (145.48 HP), first registration: 12/2023, fuel type: diesel, overall weight: 4,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale are subject to change! Internal number: 1417.8757176 ----EQUIPMENT * GAMO conversion into a sales vehicle, including FRESH?MASTER 460 - AIRPLUS refrigerated display case - body in GAMO® sandwich construction, exterior and interior made of GRP (glass fiber reinforced plastic), corrosion-resistant, exterior: white - GELCOAT? surface coating, insulation with high-quality PU hard foam, edge and frame profiles made of aluminum, thermal bridge-free roof and body profiles, white RAL 9016 - adjustable roof ventilation, 2-component cast floor with flocking and sealing, driver's cab connection with passage door, sales flap on the right side in driving direction - REFRIGERATED DISPLAY CASE SYSTEM AIRPLUS? refrigerated display case, two-part stainless steel tub, circular brushed, approx. 4,500 x 785 mm display area, electronic control with hot gas defrosting, digital display, programmable defrost times, refrigeration unit, thermostat-controlled auxiliary fan, continuous, insulated under-counter refrigeration compartment with five openings for installing flaps or drawers, internal roller fans, the evaporator is directly accessible via the service flap - heated condensate tray under the evaporator - REAR WALL washing and hygiene area, hot water supply, double washbasin, under-counter boiler with knee switch, two canisters, refrigeration unit conversion, continuous wall worktop, wheel arch conversion - ELECTRICAL SYSTEM: 230V electrical basic installation with FR distribution box, RCD circuit breaker, fuse 16 amps up to max. 3.5 kW, FR light switch, two FR double sockets (2 at the counter, 1 under the worktop), CEE wall socket 230V/16A. DIMENSIONS: Internal dimensions: 4500x2320x2050mm LWH. External dimensions: 4900x2420x2720mm LWH * Renault air suspension rear axle - Goldschmitt auxiliary air suspension for rear axle * Exterior mirrors with extended arm for 2.35 m body width * Package: Sound & Climate DAB+ - air conditioning with pollen filter - radio MP3 DAB+ with integrated Bluetooth hands-free system * Interface for bodywork (CAN) * Seat: Driver's individual seat, height-adjustable - with lumbar support * Extended rear wiring harness * Pre-wiring for body electrical system * ABS with EBV and brake assist - with automatic activation of hazard warning lights during emergency braking * Storage compartment above the windshield * Airbag: Driver side * Trailer hitch * Exterior mirrors, electrically adjustable and heated * On-board computer * Tachometer * ESP with load detection and ASR - Electronic Stability Program with traction control including hill start assist and trailer stabilization * Power windows * Transmission: 6-speed manual transmission * Glove compartment, closed * Headrests - height-adjustable * Fuel tank 105 liters * LED daytime running lights * Paint: Solid color * Steering wheel adjustable in height * Light and rain sensor * Alternator 185 A * Engine: Start & Stop automatic ENERGY = Technology package to reduce consumption, including start-stop automatic and Energy Smart Management (ESM), a system for recovering braking energy * Pollen filter * Upholstery: Fabric "Kaleido" * Diesel particulate filter, self-cleaning Bjdpfx Akjz Emqbjneww * Side wind assist * Power steering * Seats: Driver's seat height adjustable * Seats: Suspended driver's seat - with lumbar support - with center armrest * Socket: 12V sockets on the dashboard (2 pieces) * Connection for engine information * Underrun protection front axle * Immobilizer, electronic * Ce

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) Bsdpsz Ep A Hofx Akneww New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: new, Year of construction: 2026, The ENR series are air-cooled chillers designed for industrial applications and outdoor installation. The ENR 038 features axial fans, scroll compressors, condensers with finned aluminum fins, and a self-cleaning coaxial evaporator for maximum operational reliability. Internal pump, tank, fan control, low-GWP refrigerant R32. Cooling capacity 37 kW, low-GWP refrigerant R32. Bjdjz Nvkmopfx Aknsww Credit brokerage and consulting are provided by KREDIT DE AG. Representative example in accordance with § 17 PAngV: Basis for the stated rate (assuming good credit rating): Net loan amount €16,500.00, 7.10% fixed interest rate, 7.20% p.a. effective annual interest rate, 96-month term, total amount €21,674.72, monthly rate €225.78.

Condition: used, mileage: 1,04,216 km, power: 315 kW (428.28 HP), first registration: 09/2020, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,600 mm, loading space height: 600 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 69124A Equipment lines and packages * V2J Arocs 5 Exterior * B1Z ABS can be switched off * F6I Approach/front mirror, heated * Q7V Trailer coupling: center axle trailer, ring spring D50 * E6A Trailer socket 24V / 15-pin * F7Z Footboard with handrail on the roof * Exhaust to the right side * C7J Batteries arranged side by side * B1B Electronic braking system (EPB) with ABS+ASR * ClassicSpace * B4M Compressed air tank, steel * B4A Compressed air unit with condensate monitoring * B1H Compressed air unit, medium * F6R Air horns (2) on the cab roof * Cab: mounting height 420 mm * F7Y Cab: movable cab entry step * F3W Cab: tilting device, hydraulic * F1O Cab: M ClassicSpace, 2.30 m, tunnel 320 mm * F3B Cab: spring-mounted, comfort * Cab floor with engine tunnel 320 mm * Cab width 2.30 m * Cab variant: M * E1N Generator 100 A * K3V Urea tank (AdBlue): 60 liters * D8A Sliding roof, manual (steel) * N8D Hydraulic pump (Meiller pump - 5 pistons - 255 / 1) * Body/superstructure: chassis for dump truck * C8E Fenders, half shells, rear * K5A Fuel tank: 290 liters, steel, left * C6J Steering booster pump, unregulated * CLW Power steering cooler * M8B Air intake behind the cab * M6L Air compressor, 2-cylinder * M5V Engine brake, reinforced * L1I Fog lights with LED daytime running lights * N2E Auxiliary drive MB 131-2c * N6Z Oil cooler, transmission * Wheelbase not specified * C1Z Wheelbase variant 3900 mm * C0J Frame overhang 1200 mm * Curb mirrors * Q8M Rear crossmember, lowered, reinforced * M7J Underride protection under the front bumper * L2H Side marker lights, LED, flashing * F5L Sun visor, exterior * C6Y Stabilizer bar, rear axle * C6Q Stabilizer bar, front axle * R1T Steel rims 11.75x22.5 (on the front axle) * Stowage flap, outside left * F7B Bumper corners, front, in steel * B2B Drum brake, front and rear axle * C7A Underride protection, rear, fixed * L9A Preparation for rotating beacons * L9B Preparation for additional headlights * I5A Permissible total weight 18.00 t Interior * J6A Dashboard, Classic * D0S Compressed air connection in the cab * E9G Electrical pre-wiring in the cab 24V / 100 A * Electric windows * D6Z Interior filter for construction site vehicles * B1F Air dryer, heated * F4I Rear window Bwodps Aa Epljfx Aknew * E2J Circuit breaker system * D3T Seat cover / upholstery: co-driver seat, velour * D3Q Seat cover / upholstery: driver's seat, velour * D1N Seats in the cab: co-driver's seat, multi-adjustable * D1C Seats in the cab: driver's seat, comfort suspension seat * 12V socket in the co-driver's footwell * E3L 24V socket in the co-driver's footwell, additional * D7A Additional thermal insulation Multimedia * J2H Audio system: Radio Multimedia Touch * J2Y CB radio * J1A Info display, 10.4 cm * J1O Tachograph / EC control unit * J3V Truck Data Center 7 (fleet management system) * J8Y Preparation for Truck Data Center (fleet management system) Comfort and Environment * G4E All-wheel drive, switchable * Automatic switching for headlights (light sensor) * M5C EURO 6 standard * Suspension: leaf / leaf * Q2U Suspension: rear leaf springs 13.0 t * S5A Speed limiter * S5Z Speed control system (cruise control) * G2C Gearbox, 12-speed - Type: G 230-12 * F8F Comfort locking system * Steering wheel with multi-function buttons * F8W Rain sensor * G5G Transmission Mercedes-Benz PowerShift * F8B Key with remote control (2) * D4Y Sunblind, side window, driver's door * Stowage compartments with covers behind the driver's and co-driver's s

Condition: used, mileage: 3,31,000 km, power: 375 kW (509.86 HP), first registration: 10/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,550 mm, total width: 2,550 mm, total height: 3,620 mm, loading space volume: 42 m³, loading space length: 8,200 mm, loading space width: 2,460 mm, loading space height: 2,050 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, * Swivel wall body under the roof * Cargo area dimensions 8.200 x 2.460 x 2.150 mm * 20 pallet spaces * Lateral loading height 2.050 mm * 2,000 kg Bär tail lift * Pallet truck box * Certified cargo securing system * StreamSpace cab 230/17 * Retarder * MirrorCams * Navigation system * Turning assistant * Lane keeping assistant * Cooler box * Fully air-suspended * Differential lock * Lift axle * Sun visor * Air conditioning * 1 bed * Seat heating * Distance control cruise control * Automatic transmission * Euro 6 Suitable trailer available. Special equipment: Front axle load 8.0 t, Airbag driver side, Brake connection standard and DuoMatic, Cockpit multimedia interactive, Navigation system, Remote Online remote query function, Air horn, Driving assistance system: Turning assistant, Vehicle without rear underrun protection, Generator 150 A, regulated, Transmission 12-speed - Type: G 281-12, Rear axle bevel gear 485, Fender 3-piece, Fender 3-piece with splash guard, Fuel tank: 500 liters, aluminum, left, Cooler box / refrigerator, Air compressor 2-cylinder, Engine brake reinforced, Wheelbase variant 5200 mm, Frame overhang 2250 mm, Smoker's package, Waste heat recovery, Retarder, Reverse warning acoustic and flashing light (warning signal outside), Switch for MirrorCam on the bed, Tail lift switch, Interface for fleet management system, Drawers under the parapet, Fuse box, Seat cover / upholstery: Passenger seat velour, Seat cover / upholstery: Driver seat velour, Seats in the cab: Driver's seat comfort sprung seat, Sun visor outside, Sun blind side window, Driver's door, Stowage flap outside left, 12V / 15 A socket in the passenger footwell additionally, 24V / 25 A socket in the passenger footwell, 24V cab socket, Preparation for 4 surround cameras (display in the onboard monitor), Sleeping cabin curtain Further equipment: Bodpfxe Agxraj Aknoww Emission standard EURO 6, Storage compartment above the windshield with lid, Axle configuration: 6x2, Actros 5, Actros cab L, Approach / front mirrors heated, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pin, Exhaust to the right outside, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Battery 220 Ah, Batteries arranged side by side, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic activation for driving lights (light sensor), Cab: Cab entrance fixed, Cab: Interior package chrome, Cab: Tilting device hydraulic, Cab: L StreamSpace, 2.30 m, Tunnel 170 mm, Cab variant: StreamSpace, Cab floor with engine tunnel 170 mm, Cab: Width 2.30 m, Cab: Height 600 mm, Cab variant: L, Door extension for cab, Lifting roof electric, Bumper corners front in plastic design, Windshield tinted with band filter, Preparation for comfort bunk top, wide, Radiator blind, Cab: steel-sprung, Comfort, Vehicle outline lights LED, Suspension: Air / Air (full air), Window lift electric, Vehicle without rear window, Speed limiter system, Urea tank (AdBlue): 60 liters, Rear axle with active lubrication, unregulated, Body / superstructure: chassis, Comfort bunk bottom, Comfort locking system, Steering assistance pump electronically controlled, Steering wheel with multi-function, Air dryer heated, Engine 12.8 liters - 375 kW R6 diesel (OM 471), Engine variant OM 471, Tag axle 7.5 t e

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Bwodpo Afxi Nefx Aknew Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335