Used Sterilizer for sale (183)

Condition: new, Oxygen Probe for Sterile Conditions. The InPro 6800 dissolved oxygen sensor with 12 mm diameter body provides maximum accuracy and ultimate cleanability. Sensor for Hygienic Applications The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications. Lhjdpfeh Rullsx Aanor Durable and Hygienic Design The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination. Easy to Integrate The InPro 6800 DO sensor is easy to integrate into your process. Its watertight VP connector (IP68) helps ensure reliable measurements.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. Lhodpfx Aexl Dy Njanor This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: used, functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Tubing requirements: Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Lhedjuyu N Espfx Aanor Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2005, Overview  This aseptic PET filling line for fruit juices, beverages containing fruit juice and spritzers was built between 2005 and 2006 by the German manufacturer KHS. It is suitable for still and carbonated products (up to 5 g/l CO₂) - also with or without fruit fibers. The line covers all process steps from blowing to filling, labeling, packaging and palletizing and is designed for bottle sizes from 0.5 l to 1.5 l with various closure types. The nominal output is approx. 27,000 bottles per hour at 1.0 l still. The line will be in operation until approx. February/March 2026 and can be inspected by appointment. Technical details  Output: up to 27,000 bph at 1.0 l still Bottle sizes: 0.5 l - 1.5 l PET Products: Still beverages, carbonated up to 5 g/l, with or without fruit fibres Caps / neck finish: 26/22, 38 mm flat cap, sports cap possible Years of manufacture of the main machines: 2005-2006, individual units more recent (e.g. servo capper 2023, labeller 2013, winder 2017) Scope of delivery  Stretch blow molder KHS Blomax 16C (2005-2006), incl. chiller from Riedel Rinser KHS Bottle rinser FR-DR (ACF) 140 28/38 Filler KHS Innofill DNVF-PET ACF 100/15 SV, 100 filling stations, 15 capping stations, servo capper (2023) Nitrogen dropper from VBS, sterile tank, filling management from Eckel & Sohn, cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap), cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap). VBS, sterile tank, filler management KHS Metec Cap feeder Eckel & Sohn, cap disinfection KHS Innoclean KR9 (Flatcap) and SC4 Twin 28 S 04 (Sportscap) Cleanroom Cleanroom incl. ventilation system Fa. M&W, Zander/Smardt OPK Transport technology Container and air transport KHS, Lanfranchi Inspection Full bottle inspection Heuft Squeezer Labeling Krones Starmodul (YOM 2013) with Contiroll + 2x AutoCol units + dryer Krones Linadry Label inspection unit Heuft FinalView Packaging Tray/Shrink packer KHS Kisters Innopack TSP 050 V TPFO Wrap Around Packer KHS Kisters Innopack 320/70 (BJ 1999) Carry handle applicator KHS Carry Strip Master CSM 050- 2 Palletizing & wrapping Palletizer KHS Innopal Markant 1BSH2-PL + Innopal Markant 1BSH2/1-PL (both year 1999) Wrapper Haloila Octopus 1845S (year 2017, currently at a different location) Lhsdswzlb Njpfx Aanor

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, FOOD STERILIZATION DEVICE EQUIPPED WITH FLOW METER, HEAT EXCHANGER, AND CHAIN CONVEYOR FOR BASKETS Lodow Ekkdspfx Aanohr

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Pharmatec Syntegon SVP 250 LF – Formulation System for Sterile and Aseptic Liquid Pharmaceuticals For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: - Suitable for aqueous solutions, suspensions, and emulsions - Adaptable processing: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable up to 4 vessels) - Dosing of additives via manway under LAF or pump system Lhedsxdy Eropfx Aanor - Potent actives (OEB4/OEB5) processing via high-containment valve - CIP/SIP interfaces and pre-configured automation for integration with filling lines - GMP-compliant design, suitable for cleanroom classification Pricing: - Special price: please submit your offer - Original price in 2018: approx. €1,050,000 - Current list price for similar systems in 2025/2026: €1,415,000 Completion Status & Delivery Time: - Currently, the system is not fully operational, as the automation system including software needs to be reinstalled and certain components require replacement. - Completion will be handled directly by the manufacturer Syntegon, in consultation – expected lead time is approx. 3–4 months. - For comparison: lead time for a new system is approx. 12 months. Special Features: - System was originally built for exhibition purposes (demonstration unit) - Sale is directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Year of construction: 2009, condition: used, Zirbus Stainless Steel Autoclave Chamber volume 758 litres Dimensions 2100mm l x 980mm W x 1950mm H Stand-alone autoclave with vertical door are powerful Compact and economical to use Lodowuurdopfx Aanshr Due to the angular chamber shape, large loading capacities can be realized with comparatively small external dimensions. The optimum solution for your sterilization task.

Condition: used, This listing is for a Pall Allegro 50 L Standard Mixer and Weigh Platform. The unit is in full working condition and is ready for immediate release. The Pall Allegro 50 L Standard Mixer and Weigh Platform is a robust and versatile solution designed for single-use bioprocessing applications in the pharmaceutical and biotechnology industries. Engineered for consistent mixing performance, this system supports critical upstream and downstream operations including buffer preparation, media mixing, and formulation processes. This platform integrates high-precision weighing functionality with a reliable mixing system, offering enhanced process control in a compact, easy-to-clean stainless steel frame. Its compatibility with Pall Allegro single-use mixers ensures operational flexibility and sterility assurance across various applications. Key Features Integrated Design – Combines mixing and weighing in one streamlined system. Single-Use Compatible – Fully compatible with Pall Allegro 2D mixer bags. High Accuracy Weighing – Precision load cells for reliable mass control and batch documentation. User-Friendly Interface – Easy-to-use control panel with adjustable speed and mixing profiles. Hygienic Construction – Stainless steel frame with smooth surfaces for GMP compliance. Scalable Solution – Ideal for pilot-scale to small-scale commercial production. Technical Specifications Model: Allegro 50 L Standard Mixer & Weigh Platform Mixing Volume: Up to 50 liters Mixer Type: Magnetically driven impeller Platform Material: 304 Stainless Steel Weight Capacity: Up to 100 kg Dimensions (approx.): 600 mm x 600 mm x 1100 mm Power Supply: 100–240 V AC / 50–60 Hz Control System: Integrated touch screen interface Manufacturer: Pall Corporation Lhsdexl Dpdepfx Aanor Applications Biopharmaceutical Manufacturing – Media and buffer prep, formulation, and hold steps. Clinical Manufacturing – Flexible use in small-scale GMP operations. Vaccine Production – Sterile formulation and component mixing. Gene & Cell Therapy – Supports sterile, closed-system processing. Process Development Labs – Ideal for scaling up single-use technologies. Benefits Sterile Processing – Supports single-use bags to minimize contamination risk. Compact Footprint – Fits easily into lab and production environments. Accurate Dosing – Integrated weigh system for precise process control. Reduced Cleaning Time – No need for CIP/SIP due to disposable mixer bags. Pall Quality – Developed by a trusted leader in bioprocessing technologies.

Condition: new, Miltenyi Biotec Sterile Filter Adapter 170-076-610 exp. 2025.06.08 - 35 boxes exp. 2025.10.29 - 5 boxes exp. 2025.12.13 - 45 boxes Lhjdpevv Nqfofx Aaner exp. 2026.02.24 - 50 boxes 5 pcs per box, price is for one box only.

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Capacity: Up to 600 bags/hour (depending on product viscosity and format) Volume range: 0.5L – 3L Pressure: min. 6 bar Bag type: Doypack with screw cap Filling principle: Gear pump with high-precision flowmeter Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Frame: Stainless steel Cleaning/Sterilization: Integrated cleaning and sterilization functions Control panel: Touch screen Scope of Delivery  AIT DOYPACK semi-automatic filling and capping machine Integrated gear pump and flowmeter Touch screen control panel Ljdpswiu Hkefx Aanjhr

Condition: used, This listing is for the Handilaz Mini Particle Counter complete with case and manual (Others available without case - see listings) The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Lhjdpjxhga Dsfx Aanor Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2016. Lhsdpfjt E Hl Iex Aanjr The Miltenyi Biotec CliniMacs Plus Instrument P/N 44085 is a cell separation system designed for clinical-scale enrichment of target cells or depletion of unwanted cells from blood products. It automates cell separation in a sterile system, enabling the separation of target cells from unwanted cells and collecting the fractions in different bags. The system is widely applicable in regenerative medicine, adoptive immunotherapy, and graft engineering. It magnetically labels cells in the Cell Preparation Bag and separates them, providing high purity and excellent yield. With optimized protocols, the system combines reproducibility with ease of use. Specifications: Dimensions: 70cm x 60cm x 90cm (w x d x h) Weight: Approximately 35 kg Input Voltage: 100-240 V~ Power Consumption: 350 W Monitor: 10.1 TFT Touchscreen Types of Starting Material: Leukapheresis, bone marrow Processing Steps: Cell depletion and enrichment via magnetic cell separation Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Lodoukkvnspfx Aanehr

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. Lhsdpfxsxhgawe Aanjr How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Lhedpfx Aon S A R Sjanjr

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Ljdpfexhf Tisx Aanshr Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for the Binder BF115 Incubator The unit is in full working condition and is ready for immediate use BINDER BF 115 – e Series Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Internal Dimensions 550 × 550 × 380 mm (W×H×D) External Dimensions 710 × 725 × 605 mm (W×H×D) Power Supply 230 V, 0.4 kW, 6.3 A fuse (also available in 120 V) Noise Level 43 dB(A) typical Weight ~54 kg Ljdjxhfz Tjpfx Aanehr Shelves 2 chrome-plated shelves (up to 5 possible) Energy Consumption ~60 Wh/h @ 37 °C; ~235 Wh/h @ 100 °C Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Lhodpexhfz Hsfx Aanjr Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Lhjdexhfr Ejpfx Aanjr Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: used, This listing is for 1 of 2 Quattro Fluid SystemFlow 1000S These units is in full working condition and is ready for immediate use Overview & Application The Quattroflow 1000 S is a quaternary (four‑piston) diaphragm positive‑displacement pump—engineered for gentle, sterile handling of shear‑sensitive fluids such as proteins, vaccines, cell suspensions, and other biopharmaceutical or food-grade products. Its design features—like seal‑less operation, low shear, low pulsation, and dry‑run capability—make it ideal for critical applications including: Filtration systems: Tangential‑flow filtration (TFF), recirculation pumps, filter cartridges Chromatography: Gradient mixing and feed pumps Centrifuge feeding and homogenization Aseptic filling lines and other sensitive processing tasks Commonly processed media include albumin, IgG antibodies, enzymes, vaccines, cell and virus suspensions, dairy products, and cosmetic or polymeric solutions. Technical Specifications Here’s what’s known about its performance and build: Flow rate: Continuously variable between ~25 to 1000 L/h (at atmospheric pressure); around 750 L/h at 6 bar (depending on configuration) Max Pressure: Up to 6 bar, with high‑pressure variants available upon request Drive mechanism: Four‑piston diaphragm setup actuated by an eccentric shaft; standard variant uses a 5° eccentric shaft reaching up to 1,800 rpm Material & Construction: Pump head: Stainless steel grades 1.4435 or 1.4539, optional alternatives (like PEEK) available Membranes: Santoprene (diaphragm), EPDM (valve membranes) Priming and Pumping Features: Self‑priming, dry‑run capable Four directional porting—pump orientation flexible Lsdpfx Aajxhfp Ronohr No shaft seals or wetted rotating parts, minimizing wear and product heating Internal volume (filling volume): Approx 35 mL; designed to minimize dead volume and aid product recovery Connections: Standard ¾″ TC (Tri‑Clamp) sanitary ferrule; other flange types available Dimensions & Weight: Pump: 523 × 155 × 212 mm, ~23 kg Control unit (frequency inverter): 350 × 155 × 212 mm, ~6 kg Electrical: 230 V AC (50 Hz) via a control box with 6.3 A fuse; motor IP54, control box IP53 Key Advantages This model offers several standout benefits: Gentle, high‑integrity fluid handling—ideal for fragile biologics due to low shear and pulsation Contamination-free design—no mechanical seals, minimal abrasion Robust operation—powerful 370 W motor, simplified maintenance with fewer parts Aseptic and sterile process readiness—autoclavable, self‑draining, hygienic construction Installation adaptability—four flow directions, small footprint, flexible hookups

Condition: used, This listing is for the ICN Biomedicals Flow Gelaire BSB Class 2 Safety Cabinet The unit is in full working condition and is ready for immediate use Gelaire Class II Biological Safety Cabinets These are widely used internationally and are known for their high safety, energy efficiency, and ergonomic design. Key features include: Airflow & Protection They employ part-recirculating laminar airflow and separate H14 HEPA systems for both supply and exhaust. The design ensures a consistent air barrier at the front opening and maintains sterile downflow inside, all within a biodynamic sealing system that uses negative pressure around any positive-pressure zones. Eco® Control System A smart microprocessor actively regulates airflow to compensate for filter loading, manage power consumption, and maintain safe operational flow rates. Monitoring & Safety Alarms Cabinets offer real-time display of airflow velocities, internal and external temperatures, operation hours, filter life, and fan power factor. Audible and visual alerts warn of airflow deviations or other malfunctions. Standby power-saving modes and “blackout” reporting (in the event of power failure) are included. Construction & Ergonomics The housing features antimicrobial powder-coat finish, and interior zones are stainless steel (Type 304 for work zones, Type 316 for the tray). Hinged or electric sash options (depending on model) and ISO-aligned ergonomic design, noise under 60 dB(A), and smooth operation are standard. Options & Accessories Lhsdoxhfpqepfx Aanjr Available extras include gas and vacuum taps, splashproof power outlets, UV germicidal lamps, different exhaust configurations (top, left, right), adjustable stands, carbon exhaust filters, armrests, and fumigation seals.

Condition: used, This listing is for 1 of 2 Applikon BioPilot 70L Fermenter. The unit is in full working condition and is ready for immediate use Overview The Applikon BioPilot 70L is a fully integrated, pilot-scale fermentation system designed for microbial and cell culture applications in research, development, and small-scale production. Manufactured by Applikon Biotechnology, a global innovator in advanced bioreactor systems, the BioPilot 70L offers exceptional flexibility, process control, and scalability—bridging the gap between laboratory and production environments. Key Features Advanced Bioprocess Technology Precision Control: Integrated control of key parameters such as pH, dissolved oxygen (DO), temperature, agitation, and feed rates. Scalable Design: Built to mimic laboratory-scale conditions, enabling seamless scale-up to production volumes. Modular Automation: Compatible with Applikon ez-Control, DeltaV, or Lucullus® PIMS for sophisticated process control and data management. High-Quality Construction 70L Total Volume (50L Working Volume): Ideal for pilot studies, process optimization, and small-batch production. 316L Stainless Steel Vessel: Electro-polished and cGMP-compliant for pharmaceutical and biotechnological use. Jacketed Design: Enables precise temperature control via thermal fluid circulation. Technical Specifications Model: BioPilot 70L Total Volume: 70 liters Working Volume: 50 liters (typical) Vessel Material: 316L stainless steel, electro-polished Control Options: ez-Control, DeltaV, Lucullus® Sterilization: In-situ sterilizable (SIP) and Clean-in-Place (CIP) compatible Ports: Multiple ports for probes, additions, sampling, gas inlets/outlets Applications Biopharmaceuticals: Production of recombinant proteins, enzymes, vaccines Industrial Biotechnology: Fermentation of bio-based chemicals and specialty metabolites Food & Beverage: Cultivation of probiotics and functional ingredients Academic & R&D: Process development, scale-up studies, and microbial strain screening System Components 70L stainless steel fermentation vessel (jacketed) Modular control tower or integrated skid system Peristaltic pumps for acid/base, antifoam, and nutrient feed Autoclavable or SIP-compatible sensors for pH, DO, temperature, and level Gas flow control via mass flow controllers (MFCs) or rotameters Harvest and sampling ports, exhaust condenser, and sterile connections Lhjdpfexhfngox Aanor Quality Assurance Applikon fermentation systems are engineered and manufactured under strict quality control standards, ensuring full cGMP and FDA compliance where required. Factory Acceptance Testing (FAT), documentation, and validation support are provided for regulated environments. Benefits Flexible Configuration: Customizable to meet process-specific requirements Reliable Scale-Up: Accurate replication of lab-scale conditions in pilot volumes High-Level Automation: Advanced monitoring and control systems for optimized yields Ease of Integration: Compatible with existing bioprocess infrastructure Compliance-Ready: Suited for regulated production and research environments Conclusion The Applikon BioPilot 70L Fermentation System is the perfect solution for companies and institutions needing a reliable, scalable, and compliant bioreactor platform. With precise control, robust construction, and full integration capability, it empowers bioprocess development from the lab bench to commercial readiness.

Condition: used, This listing is for the Lytzen ISO Class 5 (Class 100) Depyrogenation Oven . The unit is in full working condition and is ready for immediate use. Overview Lytzen Depyrogenation Ovens are high-performance dry heat sterilizers designed for sterilizing and depyrogenating pharmaceutical containers such as glass vials, ampoules, and bottles. These ovens maintain ISO Class 5 (Class 100) cleanroom conditions throughout the entire process cycle, even at elevated temperatures. Manufactured in Denmark, Lytzen ovens are recognized for their advanced chamber design, precision engineering, and full GMP compliance. Key Features ISO Class 5 at High Temperatures ISO 14644-1 Class 5 (Class 100) Certified: Maintains Class 5 air cleanliness throughout the entire cycle. Up to 280 °C Airflow Integrity: Delivers unidirectional HEPA-filtered airflow at temperatures up to 280 °C, enabled by Lytzen’s unique chamber construction and filter suspension system. Continuous Clean Air Protection: HEPA filtration remains stable and effective during heating, sterilizing, and cooling phases. Validated Depyrogenation & Sterilization Dry Heat up to 280 °C: Validated for both sterilization and ≥3-log reduction of endotoxins. Exceptional Uniformity: Ensures reliable and consistent processing of glassware and components. High Load Capacity: Designed to support both small and large-scale pharmaceutical operations. Technical Specifications Lhedpfx Aasxhfmconsr Cleanroom Classification: ISO 14644-1 Class 5 (Class 100) maintained throughout the cycle Operating Temperature: Up to 280 °C continuous operation Airflow Type: Unidirectional laminar airflow Filtration: HEPA H14 filters with advanced suspension system Chamber Material: AISI 316L stainless steel interior Controls: Siemens HMI interface Validation: GMP-compliant; supports IQ/OQ/PQ and CFR 21 Part 11 compliance Applications Pharmaceutical: Vial, ampoule, and glassware depyrogenation Biotech: Sterile preparation of components before aseptic fill Sterile manufacturing: Endotoxin removal for GMP environments Laboratory: Pilot-scale sterilization and dry heat validation Benefits True ISO Class 5 at 280 °C – unmatched cleanroom integrity during high-heat operation Regulatory Confidence – supports global GMP and FDA requirements Superior Engineering – long filter life and low maintenance through innovative construction Process Consistency – validated, repeatable depyrogenation cycles Scalable Solutions – available for lab, pilot, and full production use

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials Lhedpfx Aajxhflxonsr System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Year of construction: 2002, condition: used, Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Lhodpjxhfkusfx Aaner Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.