Used Stock Tents for sale (12,848)

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm Gbsdpfx Aaju R S Dzsbsu - Worktable width: 280 mm - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. - new exhibition machine -

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Gbjdjl R Hy Aepfx Aabju Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Gbedpsu T H Iqofx Aabsu Hydraulic press brake PBO-3116-PRO DA-66T Specifications - Nominal bending force: 1600 kN - Motor power output: 15.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 9700.0 kg - Oil tank: 210 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: used, Year of construction: 1999, diameter 3 - 16 mm length 3000 mm = bar loading magazin Gbedpfx Astqqp Ioabju for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø

Year of construction: 2006, condition: used, Storti used modules in stock Gbodpfxomxfh Ao Aabou

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, Brand new 4th generation laser cutting system SF3015H is designed for high laser power outputs up to 20KW. Our laser cutter is equipped with a MAX 5G 6KW laser source! Integrated control cabinet included. The system features an automatic pallet changer, which significantly reduces loading times. The machine bed is reinforced. The machine has an automatic smoke extraction system. Machine controls are in German. HANLI water chiller. Purchase ex-stock Büren, including setup and training, with a 1-year warranty. For further inquiries, please contact us directly! Gbjdpfxjk R T Nmj Aabeu

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Gbedpfx Ael R Hz Ssabou Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Gsdpfx Ajrp Dt Tsabobu Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 programmes consisting of 25 steps and 99 repetitions each - up to 30 lower and upper dies can be stored in the memory - controller with 2D/3D programming mode - 17″ TFT touch screen - Windows with driver software (possibility to create programmes using the external computer) - control of bending compensation from the controller - comprehensive design of the Delem controller - USB with possibility to connect devices - space for connecting a bending angle sensor Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 1999, diameter 15 mm Gsdpfx Aovh I Uaeabebu length 800 mm = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-4124-PRO DA-66T Specifications - Nominal bending force: 2400 kN - Motor power output: 22.0 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 100 mm/s - Weight: 14000.0 kg - Oil tank: 210 l - Maximum bending length: 4100 mm - Distance between side frames: 4100 mm - Ram width: 3550 mm - Table height: 1610 mm - Daylight: 530 mm - Maximum stroke: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price Gbedpfx Asvwmkfjabsu 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-4120-PRO DA-66T Specifications - Nominal bending force: 2000 kN - Motor power output: 18.5 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 110 mm/s - Weight: 12500.0 kg - Oil tank: 210 l - Maximum bending length: 4100 mm - Distance between side frames: 3550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 530 mm - Maximum stroke: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software Gbjdjvwmi Ispfx Aabeu - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resolution TFT colour screen - Full Windows operating system - Compatibility with Delem Modusys system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in this menu for parameter adjustment - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Gbedpfx Aaerp Dwajbsu Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. Gbjdpfx Aoh E Izfeabju View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic guillotine shears SMO-3106-N Cybelec CybTouch 8 Specifications - Maximum cutting thickness (S235): up to 6.0 mm - Maximum cutting length: 3200 mm - Blade inclination angle: 1.5° - Strokes per minute: 14 - Backgauge travel distance: 600 mm - Motor power output: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Weight: 5200.0 kg Equipment and features - Backgauge equipped with ball screws and driven by the electric motor - Hydraulic hold-downs to clamp the sheet over the entire cut length. - Blade clearance adjustment - Ball transfer units on the worktable - Work lighting - Front supports - Mobile foot switch Rear chute The rear chute is equipped with ball transfer units to slide smoothly away from the shear after cutting. CybTouch 8w control (Mounted on a swivel arm on the left-hand side of the machine.) - Parameter setting based on material specifications - Automatic clearance setting - Automatic correction for backgauge positioning - Backgauge retract movement to avoid bending of material Gbsdpfx Asvhclmeabeu - Supports that cover ⅔ of the standard size material - Support for RTS - the handover of the cut material to the user - Support for the motorized backgauge - Docking position - Hold-down pressure on sheet management - Hydraulic pressure management - Saving long cut sequences and programming in live colors - Clear page layout with large buttons on the easy-to-read screen that displays all the data an operator needs. - Very intuitive and operator-friendly user-interface - Few-second programming a part sequence - Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials The remaining time can be checked in the Otinus Customer Panel.

Condition: new, Year of construction: 2024, CNC plasma/gas cutting machine PCO-3015-AG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Gedpfx Ajh E Sgtoabebu Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-2512-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1270 x 2600mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 1050.0 kg - Maximum load: 1750.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Godpfx Ajrp A Ukjabobu Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm Gedpfxethi Ams Aabebu - Total mass: 900.0 kg - Maximum load: 1120.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-69T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-69T control - More efficient bending thanks to automatic control of 8 axes - Can store up to 500 programs, each consisting of 25 steps and 99 repetitions. - Can save up to 30 upper and lower dies. - 2D and 3D programming capability - 17-inch color TFT screen of high resolution - Windows-based software with PC programming capability - Crowning control managed by the controller - A well-integrated structure, designed by Delem to meet the highest standards. - USB port with device connectivity - Mounting port for a bending sensor - The control system and sensors prevent collisions between individual axes. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Within the service, our technicians may - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Manufactured in Turkey Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Gedpfevwmgtex Aabsbu Terms of cooperation - 24-month warranty - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-66T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm Gedpfx Aasvwmf Nobjbu - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Manufactured in Turkey Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours - Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2900 mm - Weight: 10500.0 kg Gbjdpfxjipxzpe Aabju Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3116-PRO DA-66T Specifications: - Tonnage: 1600 kN - Motor Output: 15.0 kW - Oil Tank Volume: 210 l - Approx. Weight: 9700.0 kg - Inside Frames: 2550 mm - Bending Length: 3100 mm - Distance between side frames: 2550 mm - Side Frame Width: 1600 mm - Bed Height: 880 mm - Daylight Opening: 540 mm - Stroke: 260 mm - Table Width: 60 mm - Throat Gap: 410 mm Speed: - Approach: 160 mm/s - Working: 10 mm/s - Return: 130 mm/s Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - 2D and 3D graphical touch programming module - 3D visualization for simulation and processing - 17" colour TFT screen of high resolution - Full Windows operating system - Compatibility with the Modusys Delem system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in parameter adjustment menu - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty Gedpfxju T H Ano Aabjbu - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3112-PRO DA-66T Specifications - Nominal bending force: 1200 kN - Motor power output: 11.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 8400.0 kg - Oil tank: 140 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1590 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price Gbedsvhcgwepfx Aabou 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3120-PRO DA-66T Specifications: - Tonnage: 2000 kN - Motor Output: 19.0 kW - Oil Tank Volume: 210 l - Approx. Weight: 10000.0 kg - Inside Frames: 2550 mm - Bending Length: 3100 mm - Distance between side frames: 2550 mm - Side Frame Width: 1600 mm - Bed Height: 880 mm - Daylight Opening: 530 mm - Stroke: 260 mm - Table Width: 90 mm - Throat Gap: 410 mm Speed: - Approach 150 mm/s - Working 10 mm/s - Return 130 mm/s Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - 2D and 3D graphical touch programming module - 3D visualization for simulation and processing - 17" colour TFT screen of high resolution - Full Windows operating system - Compatibility with the Modusys Delem system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in parameter adjustment menu - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation Gbedpfx Aasu T H Rrjbeu - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 800 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4500.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA Otinus CNC OT-41 control The CNC controller Otinus is featured with convenient and intuitive menu. The software calculates the bending angle on its own. The large color touchscreen is readable from any angle. The controller can store up to 2,000 programs of 30 steps each. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. - Steel hydraulic line tubings - Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Included in the machine price 2-day training including installation of the machine Godpfx Ajh Ranleabobu - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3112-PRO DA-69T Specifications - Nominal bending force: 1200 kN - Motor power output: 11.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 8400.0 kg - Oil tank: 140 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1590 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm Gbodpfjvwmh Dex Aabeu - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.