Used Stretch Bending Machine for sale (84,247)

Condition: used, Year of construction: 1999, tube diameter bis 60 mm Itsdpfjvvnm Sox Aanjr weight of the machine ca. 1,8 t

Condition: used, functionality: fully functional, Year of construction: 1997, Very nice hand-operated three-roll bending machine Manufacturer: Fasti Model: 103-20-1.25 Working area: 2040 x 1.25mm According to the nameplate, year of manufacture: 1997 VERY LITTLE USED! The roll surfaces are completely smooth, even if the picture may make it look as though there are "grooves" on the left side. Location: Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The information and images were provided by the owner and approved for publication. The visual condition of the offered items corresponds to their age and the pictures shown. The technical condition and wear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty. Ijdpfxowu Euve Aanetr

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Used Machine Internal Code: Svr 317 Itjdowrrhwepfx Aansr

Condition: new, Year of construction: 2024, - Shaft diameter 50 mm - The upper roller is hydraulically moved Ijdpfx Aajgg N Twenotr - Three rollers are driven - Digital display - Can be used horizontally/vertically - Foot switch - Emergency stop - Documentation - 400 V

Condition: ready for operation (used), Year of construction: 2005, Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Ijdpfx Aaexwyw Ijnotr

Condition: used, Glaser flat steel bender HAWE HC4L/3,0 Hydraulic see pictures Isdpeu Da Afofx Aanotr

Condition: new, Year of construction: 2025, STANDARD: Hardened segmented blades with Arkor coating Joystick control for clamping and bending Bending angle adjustment with mechanical protractor Manual backgauge OPTIONAL: Foot pedal and electrical panel Digital display NC-controlled backgauge Motorized backgauge 2020×3 Working length (mm): 2020 Bending angle: 135° Capacity (mild steel, mm): 3 Clamping motor (kW): 0.55 Bending motor (kW): 2.2 Length (mm): 2200 Width (mm): 1100 Iedpfx Aaoxlclkonstr Height (mm): 1260 Weight (kg): 1750

Condition: used, 25/11/2025 Minimum wire diameter: 3.0 mm Maximum wire diameter (depending on tensile strength): up to 6.5 mm at ≤1600 N/mm² up to 7.5 mm at ≤1200 N/mm² up to 10.0 mm at ≤800 N/mm² up to 13.0 mm at ≤600 N/mm² Maximum wire feed speed: approx. 40 m/min Wire feed length: unlimited (limited only by part length and space) Maximum coil diameter (closed ring): 1000 mm Distance from bending head center to machine front panel: 1000 mm (working depth) Minimum distance between two bends: ≥ 3 × wire diameter Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation) Isdpsxr Ncvofx Aanstr Compressed air pressure: 6 bar Compressed air consumption: 1–30 L/min (depending on configuration) Machine weight: approximately 7500 kg

Condition: used, functionality: fully functional, BARIOLA PRESS BRAKE 3050 X 100 TON ESA CNC 4 AXES MODEL PBI 100/30NCS Itsdpfjxlr Uhjx Aaner DISTANCE BETWEEN FRAMES: 2600 mm STROKE: 150 mm WEIGHT: 7000 KG WITH CROWNING TABLE USED MACHINE INTERNAL CODE: SVR 360

Condition: new, - Ring bending machine - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven - 2 digital displays - Brake motor Iedpfx Asgg N Amjanjtr - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1550 mm Isdpjxabkbsfx Aanjtr plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Year of construction: 1981, condition: good (used), Sheet metal bending machine SCHÄFER (Schaefer) Roller length: 2000 mm Roller diameter: 220 mm Sheet metal bending thickness: up to 20 mm Machine weight: approx 18-19 000 kg Itodpehufgpefx Aanjr

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT Itsdexircgspfx Aaner • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: good (used), ZOPF ZB 70/2 H – Ring Bending Machine / Profile Bending Machine Manufacturer: ZOPF GmbH Model: ZB 70/2 H Serial number: 5710276 Year of manufacture: 2005 Category: Ring Bending Machine / Profile Bending Machine Location: Germany Technical Specifications Power supply: 400 V / 50 Hz Motor power: 2.2 kW Current: 6.5 A Number of driven rolls: 2 Top roll adjustment: Hydraulic (H version) Roll speed: 8.5 rpm (max.) Speed control: rotational speed adjustable via potentiometer Mechanical Specifications Shaft diameter of rolls: approx. 40 mm Roll/bending roll diameter: approx. 152 / 162 mm Hydraulic pressure force: approx. 80 kN Adjustment travel of top roll: approx. 120 mm Itedpfxjxw Np Ts Aanjr Working position: suitable for both horizontal and vertical operation Construction: welded steel frame, conical roller bearings, interchangeable slideways Bending Capacity (indicative) Round tube: up to approx. Ø 70 × 2 mm Solid round: approx. Ø 35 mm Angle profile: approx. 50 × 50 × 6 mm Dimensions and Weight Machine weight: approx. 470 kg Dimensions: 800 mm wide x 900 mm deep x 1200 mm high Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you verify all relevant details independently. Financial Information VAT/margin: VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: new, Year of construction: 2025, Hydraulic bending machines HKS-CNC Profi are equipped with automatic scissors and a movable mass for moving sheet metal. CNC software enables the graphic design of profiles of various forms and sizes. A 21,5-inch industrial LCD touch-screen makes the programming even more manageable. Working length: 4.000 mm Itodpfx Aoxtyabeanjr Machine length: 5.100 mm Sheet metal thickness: 1,5mm (Al), 1,25 mm (Stahl) Stand number: 4 Machine weight: 2.500 kg Delivery time: in stock

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, input voltage: 400 V, empty load weight: 225 kg, - Capacity 1050 x 0.8 mm Ijdpfxor Iza Re Aanotr - Roll diameter 46 mm - Conical roller - Swivel top roller - Foot control - Emergency stop - Documentation - 400V

Condition: used, HYDRAULIC folding and bending machine. AJIAL BRAND MODEL 1410. CAPACITY 4050 X 140 TN, SYNCHRONIZED MANUAL STOP. Folding length 4050 (5195) Liquidation by auction due to end of operations and final closure of a used industrial machinery and tools company Brand: AJIAL Iedpfxsxzrcqs Aanotr Model: 105 Folding force: 140TN Folding length: 3050 Distance between columns: 2600 mm Approx. Y dimension: 40 mm Y bending size: 7.5 mm Y return size: 50 mm Table distance to cutting area: 500 mm Table width: 240 mm Table height: 850 mm Throat depth: 300 mm Weight: 10,000 kg

Year of construction: 2008, condition: ready for operation (used), A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible. Itsdpfxjxvrv Ho Aaner

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection Isdpfx Aasxircasnstr • Detailed Operation Report Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material Iedpfxoh D Svno Aanetr 1x for? - footswitch

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm Itsdpfoxn Rvisx Aaner MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: new, roller diameter: 90 mm, working width: 700 mm, sheet thickness steel (max.): 35 mm, - Capacity 700 x 3.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop Itedpsr Ign Refx Aansr - Documentation - 400V

Condition: new, - Capacity 1270 x 2.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical rolling option Itjdpfx Aaswfn E Eoner - Pivoting top roller - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: new, - Shank diameter 50 mm - Top roller is moved hydraulically - Digital display Isdpfehyc Rxox Aanstr - Can be used horizontally/vertically - Foot control - Emergency stop - Documentation - 400V

Condition: new, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control Itodpjlxw Rmofx Aaner - Emergency stop - With 1 set of standard steel rollers - Documentation - 400V