Used Styro Cut for sale (16,800)

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pgsdpfx Aehw Ng Ioahju Pneumatic side clamp device

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 56 m/min, feed length X-axis: 560 mm, feed length Y-axis: 360 mm, feed length Z-axis: 480 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 56 m/min, Make Hyundai Wia Pgsdpfsw T Rv Iox Aahju Model i-Cut 380 MD Year of manufacture 2018 Control system Siemens 828 chop-mill and 3D simulation Pallets 2 Palette size 650x400 mm Pallet load 250 kg Traverses X/Y/Z 560/360/480 mm Rapid feed X/Y/Z 50/50/56 m/min Spindle speed 24,000 rpm Spindle power 10.5/8 kW Tool taper BT 30 Big plus Number of tools in the magazine 20 pcs. Machine dimensions LxWxH 2.0x2.7x2.85 m Length: X-way 2.0 m Width incl. chip conveyor 4.1 m Machine weight 5200 kg Equipment: Chip conveyor with drum filter, swivel, pallet changer, Fixture plate with reference holes.

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Pgsdpfx Aasq A I Upjhou Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm aggregates: 2 1st saw cut unit Random System: Saw cut optics 2nd brush : Tynex, diameter 220mm Height adjustment: electric Height display: digital Feed speed: 4 - 12 m/min Motor power saw blade: 1.1 kW Pgjdjupy Spjpfx Aaheu Motor power brushes: 4 kW Motor power feed: 0.37 kW Machine length: 1400mm Machine width: 1500mm Machine height: 1600mm weight: 700kg

Condition: good (used), Year of construction: 2000, Wohlenberg 155 CUT-TEC Reference No.: CU-001414 Cutting line Year: 2000 Width: 155 cm With monitor Programmable Air table Baumann Jogger BSB 6L Baumann Unloader BA 6N Baumann Pliers Transport System BFS-R HV Complete line Regular service In stock Available: immediately Podpfewylf Sjx Aahsgu Location: Germany

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Pedpokbx Eajfx Aahsgu Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. grooving aggregate with jump for softforming function Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Pgjdpfx Aew Htm Roahsu Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Pedpfxew Rr Dbs Aahjgu

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication Pjdpfjifu Ansx Aahogu - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition

Condition: good (used), functionality: fully functional, Thermal-Dynamics plasma and oxy-fuel cutting table, model ULTRA-CUT 300XT CE Pedjxlqx Eepfx Aahsgu Technical specifications Working area: 12000 x 3000 mm Overall dimensions: 14000 x 5000 mm Machine weight: approx. 5000 kg Power supply: single-phase 220 V - 3 Amp Torch height control: automatic adjustment Equipped with a CNC controller featuring motion control, I/O, user interface, and an integrated optional plasma height control, all in one package. Runs on Windows 7, 2 GB RAM, 2 USB ports, 120 GB SATA SSD hard drive, etc. Sold with its manual. Retrofit completed in 2021. Selling due to modernization of facilities.

Condition: refurbished (used), C11 MKL Cross-Cut Optimization Line, offered by Wood Expert Industry, is a state-of-the-art technological solution designed specifically for industrial wood processing and operational workflow optimization in woodworking facilities. All equipment comprising the processing line is manufactured by Paul Germany and was completely overhauled in July 2025 with zero operating hours. Paul C11 MKL Lumber Optimization Line Components - 9.0 m / 230 mm Inclined Conveyor Belt Ideal for the automatic and efficient handling of wood pieces towards the processing area, equipped with a guided belt and robust clamping parts for stable transport. - Measuring Station with Luminescent Scanner and Photocell Allows precise identification of the start and end of workpieces, featuring dedicated lower rollers for high-accuracy measurements. - Pressure Roller Unit Ensures correct alignment and pressing of pieces between 250 and 4200 mm, with manual adjustment available according to the material thickness. - Reinforced Marking Rails, Left and Right Automatically pre-marks cutting positions for increased efficiency and accuracy in subsequent processing. - C11 MKL Optimizer – CNC Cross-Cut Saw Station Includes a robust welded steel frame, 500 mm TCT blade, 5.5 kW servo-driven motor, variable speed, and an advanced feeding system with lower/upper rollers for precise piece guidance. Electric adjustment of the upper rollers allows automatic adaptation to wood thickness. The system features automatic waste extraction, extraction ports, CE safety compliance, and advanced cutting quality options (blade with 132 conical teeth). - Waste Extraction System Comprises an 11.5 m / 230 mm conveyor belt and ascending waste belt (3.0 m / 500 mm with collection hopper), optimizing material flow and disposal of residues. - Length Sorting System With pneumatic ejectors and basic sorting equipment, this facilitates automatic organization and discharge of pieces to two outfeed positions, increasing line productivity. - Maxi8 Premium Operator Terminal and Optimization Software 17” touchscreen terminal, dust-protected, remote diagnostics, Linux-based, with dedicated optimization software (up to 60 cutting lists, 9 grading options, 400 preset lengths/list), advanced statistics, network integration capability. Includes data import/export options via USB. - Control and Automation Equipment Standardized electric cabinets, control panels, complete installation and wiring performed with high-quality components for intensive industrial use. Pgedpfx Asw Emf Rjahou Benefits of integrating this line: - Fully automated cross-cutting process, significantly reducing human error. - Increased efficiency and yield through cutting list optimization and automatic length sorting. - Adaptability to various thicknesses and sizes of workpieces. - Advanced digital control and remote diagnostics for quick interventions. - High reliability, reduced maintenance costs, and adherence to strict CE safety standards. This optimization line can be customized for different types of wood processing facilities, ensuring efficient operation tailored to every client’s requirements.

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) Psdpfx Aof Epzgoahegu -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: excellent (used), Stephan um40 with a jacketed 40 litre cooking vessel. With a s blade cutter and mixer with sidewall scrape. Pgjdoxdfccjpfx Aaheu

Condition: as good as new (ex-display), Year of construction: 2022, 450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades Pgjdpfx Aaeh Uctvohou -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding Width: 40mm Total Power: 8KW Power Supply: 3PH+N+PE Air Source: 0.8MPa (As 40*30 products, 25m a small roll calculation: 3000m raw materials, average 30 minutes a roll of raw material. Every 25m a small roll and rewinding 6 rolls at the same time. 720 rolls can be produced in 10 minutes) Machine in stock in our showroom

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Pedpjdzp T Dsfx Aahegu Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Pgedpjqpdkcsfx Aahsu

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,250 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.250 mm Cutting width: 4.300 mm Year of construction: 2008 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Pgodpfx Aajqi Azpehou Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 300 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: up to 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 90 mm Push-off trolleywith 2 pcs. Push-off devices Book aligning device for longitudinal board edges Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction longitudinal - Recesses for forklift trucks This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Pgedpfow I Dpqex Aahou

Condition: good (used), Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into interleaves of the desired length, directly from the roll. Podoxamyhspfx Aahsgu Fully automatic cross cutter PAL-Cut 800 Sheet dispenser that cuts interleaves quickly and precisely to the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rolls up to 800 mm wide. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 For roll widths up to: 800 mm Pick-up height: 1,368 mm Working speed: 480 pieces/hour Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 You can find more items—new and used—in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, COIL PROCESSING MANUFACTURER IN TURKIYE. Psdpjh E Sh Hofx Aahogu Our cut-to-length line Our roll cutting lines that you need for cut-to-length sheets with a sheet width of 200 mm -2000 mm and a roll weight of 6,000 kg to 30,000 kg. Until recently, the iron and steel enterprises were producing sheet metal, since the coil sheet opening systems were not sufficiently developed. The developments in the coil sheet opening sector in recent years have led iron and steel businesses to produce coiled sheets. As a result of these changes in sheet metal production, the demand for coil sheet slitting and cut-to-length lines has started to increase and businesses have started to prefer the way of plating their own products. This situation also eliminates the cost of plate sheet stocking. At this stage, BOSPORAS offers solutions from A to Z, including cutting-to-length systems, uncoiling, straightening, feeding, guillotine shearing, conveyor and stacking of coiled sheets. The most distinctive feature of our Cut-to-Length Line is the cutting feature with the Rotary or Fly Guillotine shear system. It is a professional straightening thanks to the high quality and powerful Leveler Machine. And Cut to Length Line offers the possibility of automatic stacking of the materials. This is provided by the leveler cassette system.Suitable for all sheet material types from 0.3 mm to 10 mm. General features of the systems; Easy operation and maintenance with high level of automation Easy roll loading thanks to hydraulic uncoiler with loading trolley Maximum surface smoothness thanks to multiple straightening rollers Protecting sensitive surfaces with high quality rollers and carriers Burr-free and high-quality cutting automatic stacking system Compact design that takes up little space compared to its capacity Low cost, high quality, maximum efficiency

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium CNC Control Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatically lowering work tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of complete system: 2600 x 2600 x 2340 mm Total weight of system: 3300 kg The machine is cleaned, completely overhauled and tested for all functions after order confirmation. Pgedpfx Aaew D Accehou You receive a 6-month warranty on the machine. Commissioning service is available upon request.

Condition: used, Work table with "swallowtail" fixed cuttings Overall size:1100x1400x800 mm Weight: 1880 kg Pgedpfx Aajhyxa Aohsu

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 4,250 mm, cutting height (max.): 120 mm, cutting width (max.): 4,100 mm, main saw diameter: 460 mm, power: 21 kW (28.55 HP), Machine type: fh6 430-410 / HT220 / MCS-Evolution / Win 10 Cutting length: 4,250 mm Cutting width: 4,100 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 21 kW Pjdpfx Ajlni T Eoahjgu Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 125 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pcs. (2100 x 700 mm) Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Automatic cutting length adjustment Scissor lift table: - Panel width: 2200 mm - Platform - Hydraulic unit - Max. Load: 6,0 tons - Push-off trolley - Rack and pinion drive - Frequency converter driven - Drive shaft - Push-off device: - Quantity: 2 pc(s) - For panel thicknesses ≥ 6 mm - Probe spindle for automatic package height adjustment - Floating - Cross alignment stop at the roller table - length: 1450 mm, measured from the saw line - solid box-type steel welded construction - alignment stop surface is precision machined - Book aligning device for longitudinal board edges - Quantity: 2 pc(s) - For pusher infeed - Raise- and lowerable aligning dog - Pneumatic operation - Counterholder: - Quantity: 2 pc(s) - For board thicknesses ≥ 6 mm This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: used, wire diameter - max. 10 mm wire diameter - min. 3 mm wire length 8 m Pgodpfx Aaewu Hg Hjhju total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: like new (used), Year of construction: 2025, coil weight: 30,000 kg, number of straightening rollers: 9, conveyor belt width: 2,000 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 10 mm, sheet thickness copper (max.): 20 mm, inner diameter: 508 mm, sheet thickness (max.): 10 mm, sheet thickness brass (max.): 20 mm, product height (max.): 10 mm, outer diameter: 2,000 mm, roller diameter: 156 mm, coil width: 2,000 mm, coil outer diameter: 2,000 mm, cutting length (max.): 6,000 mm, working width: 2,000 mm, stack height: 400 mm, Coil Cut to Length Line with Stacking ( 2 - 10 mm x 2000 mm x 30 Ton) TFS Coils, Tin Plate, Galvanized, Stainless Steel, CR, HR, Brass, and Copper to be Cut to the length Teneke Sac, Aluminyum, Galvanizli Sac, Paslanmaz Çelik, HRP, DKP. Hydraulic Expansion Motorized Decoiler with Transmission Box Hydraulic Coil Car Servo Feeder Pgsdpfx Aewutp Usahou Hydraulic Shear Automated Stacker COIL PROCESSING MANUFACTURER IN TURKIYE. Our cut-to-length line Our roll cutting lines that you need for cut-to-length sheets with a sheet width of 200 mm -2000 mm and a roll weight of 6,000 kg to 30,000 kg. Until recently, the iron and steel enterprises were producing sheet metal, since the coil sheet opening systems were not sufficiently developed. The developments in the coil sheet opening sector in recent years have led iron and steel businesses to produce coiled sheets. As a result of these changes in sheet metal production, the demand for coil sheet slitting and cut-to-length lines has started to increase and businesses have started to prefer the way of plating their own products. This situation also eliminates the cost of plate sheet stocking. At this stage, BOSPORAS offers solutions from A to Z, including cutting-to-length systems, uncoiling, straightening, feeding, guillotine shearing, conveyor and stacking of coiled sheets. The most distinctive feature of our Cut-to-Length Line is the cutting feature with the Rotary or Fly Guillotine shear system. It is a professional straightening thanks to the high quality and powerful Leveler Machine. And Cut to Length Line offers the possibility of automatic stacking of the materials. This is provided by the leveler cassette system.Suitable for all sheet material types from 0.3 mm to 10 mm. General features of the systems; Easy operation and maintenance with high level of automation Easy roll loading thanks to hydraulic uncoiler with loading trolley Maximum surface smoothness thanks to multiple straightening rollers Protecting sensitive surfaces with high quality rollers and carriers Burr-free and high-quality cutting automatic stacking system Lec Edpbveh E Sh Hovsac Compact design that takes up little space compared to its capacity Low cost, high quality, maximum efficiency.