Used Super Finishing Machine for sale (87,206)

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA In our opinion, the machine is in good used condition and can be viewed under Ijdsxwdwlspfx Aanotr power by appointment. Including Felsomat FZ250 Loading system Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm Iodpfxsw Nxkfo Aanjtr *

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Isdpfx Aaoxq Hknenstr Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2013, condition: used, Technical details: swing diameter: 80 mm workpiece length: 450 mm Isdpfjixl Ahjx Aanstr weight of the machine ca.: 3500 kg

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Isdpfxsxqrg Is Aanjtr Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg Iodpfxoxfwflo Aanotr In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 WITHOUT IDM You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Itjdpfoxnxy Nex Aaner Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. Itedsl Dw D Espfx Aanjr The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Year of construction: 2015, condition: ready for operation (used), Additional Equipment LN710 5" Servo Focus Head + LN010 5" High-Accuracy Lens (2.0 MPa) PC010 2-Pallet Changer TL322 4th Gas Line (Super High Pressure, 3 MPa) XXX001 Smart Junior (Software) with Training XXX002 Donaldson Dust Collector XXX003 Set-Up Kits Ijdpfx Aox D Nvmoanetr This Mazak SUPER TURBO-X 612 MK III G was manufactured in 2015. It features a maximum cutting area of 2000 × 4000 mm and a resonator power of 4 kW. Standard equipment includes an Automatic Nozzle Changer, Auto Calibration, and a Safety Cover. Additional features like a 2-Pallet Changer and a Dust Collector enhance its functionality. If you are looking to get high-quality cutting capabilities, consider the Mazak SUPER TURBO-X 612 MK III G machine we have for sale. Contact us for more information. Application Types Cutting

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer Isdpfx Aoh I N Udjanotr * Special construction of control panel(EU Standarts) included

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20830 € 399.94 € 40 to 250 mm 200 x 20 mm Itedpfoxh Rulex Aansr 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: ready for operation (used), Year of construction: 2011, table length 3050 mm table width 1525 mm burner heads 1 Control Mazatrol Preview M Number of working hours 31400 h laser capacity in Watt 4000 max. table load 915 kg max. size of workpiece LxWxH 3050 x 1545 x 25 mm sheet thickness - max. 25 mm height of material-table 375 mm table height over floor 900 mm rapid traverse x / y / z axis 24 / 24 / 25 m/min weight of the machine ca. 14,2 t dimensions of the machine ca. 8 x 2,9 x 2,6 m Well-maintained laser cutting system (CO2 gas laser) with travel distances x/y/ z = 3260 x 1545 x 430 mm, maximum working area: 1525 x 3050 mm, 3rd turning Itedpfx Aaox H Tuujnsr axis NC rotary table for mounting tubes (therefore Z-axis 430 mm), gantry loader with vacuum lifter for feeding new sheets and lifting unit for removing finished sheets, as well as control cabinet with operating elements, tapping unit with drill magazine, automatically retracting protective hood, Donaldson extraction system, cooling system, further technical data available upon request. The gantry loader uses a vacuum lifter to pick up the new sheets, automaticallypicks up the laser-cut sheet during transport, sets the new sheet down, and then moves it to the delivery table for the finished sheet, where it is placed – see video 2. The extraction system, cooling system, and transformer are mounted on the platform above the machine. Mazatrol Preview M control unit with color TFT, 64-bit CPU, 20 GB hard drive, EIA/ISO format programming.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 950 de Luxe In-Line Year of construction: 2006 Dimensions: approx. 2500 x 1650 x 2100 mm (LxWxH) Weight: approx. net 800 kg / gross 880 kg Technical Data: Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 920 mm, bottom 920 mm Working height: 815 - 915 mm Passage height: 500 mm Power connection: 400 V three-phase current Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 25 L/cycle Touch panel: Siemens TP177 Control system: Siemens S7 This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor Manufacturer: Kallfass GmbH Type: Shrink tunnel Universal 950 HV Year of construction: 2006 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical Data: Technical data: Iodpfovfd Rfsx Aanjtr Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of the heated tunnel hood: 1700 mm Length of the additional insulating hood: 2200 mm Tunnel outlet, extended: approx. 600 mm Working height: 800 - 900 mm Power connection: 400 V three-phase current Rated power: 39 KW Rated current at 400 V: 56 A for single operation Particularly powerful shrink tunnel with bottom and laterally adjustable for precise control of the hot air outlet for optimum shrinking results even with shrinking results even with difficult product contours. Equipped with 2 hot air blowers and infinitely adjustable bar chain transport. Function guarantee, no warranty

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg Itedpfx Aexdfaboaner d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Itodpfouxdb Uox Aaner

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, documentation/manual, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standarts) included * Main swicth and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. Itodpfewb Hhdex Aanor * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Itodpfoxmlinox Aanjr

Condition: used, Year of construction: 2015, functionality: fully functional, Manufacturer, Modell: Xeikon 3500 + GM Converting System Scope of delivery: Xeikon Press + GM Inline Finishing System Status: Xeikon Service Date of Installation: June 2016 Year of Manufacture: 2015 Counter: ca. 5,6 Mio running meter Operation hours: ca. 5070 h Print Technology: Dry toner electrophotography Itedpfevitwpjx Aanor Imaging Head: High-Precision LED Matrix Printing Engines: One-Pass, 5 (CMYK+White/Spot) Media Input: Web-fed Media Output: Rewinder Imaging Quality: 1200 x 3600 dpi, variable dot density Media Width: 250-516 mm Toner: QA-I dry toner Printing Speed: Up to 594 sqm/h Media Weight: 40-350 g/m?, 550 ?m Substrates: coated/uncoated Papier, PE, PP, PET, Vinyl, Coex-Folie Digital Front End: Xeikon X-800 Xeikon 3500 | Digital Label B2 Press, Year of manufacture 2015, First Installation June 2016, Print Counter: around 5,6 Mio. meters (status May 2024), Operating hours: around 5.070 hours (status May 2024), Digital Front End: Xeikon X-800 with control PC and 2 monitors, Xeikon Software My Press Version 6.63.x, Machine is expected to be dismantled in week 24, Machine is still in service contract GM DC 500 | Converting System, the DC500 can be set up as an in-line extension to a digital label printing system, allowing the web to continue directly into the converter from the digital press, Year of manufacture 2016, First Installation June 2016, Web Width 100 mm ? 500 mm, Substrates 50-200 gsm, Buffer for manual change of rools in production, Full or Spot Varnish possible, Semi-rotative Die-Cutting Station, Semi-Rotary Speed 40 m/min, Die Plate Size (repeat) 50-558,8 mm, Slitting | 1x Dish Knife and 15x Razorblades, 2 Rewinders with 75 mm diameter, Waste Matrix Rewinder, 4 Anilox Roller, 4 Print Cylinder for varnish, Machine is expected to be dismantled in week 24, Machine was in service contract, Pictures and datasheet attached Through many years of serious and professional development, JORG Graphische Produkte GmbH has established itself as one of the world's leading providers of certified pre-owned digital printing and finishing systems. Since we have started the Digital Press business in 2009 we have sold more than 190 High-End Digital Printing Systems for commercial, packaging and label printing worldwide. Meanwhile, the scope of services of JORG includes qualified advice according to customer specifications, Machine Sales, On-Schedule Delivery Service, On-Site Installation with Operator Training as well as After-Sales Service and Support. The machines of the brands such as Xeikon, HP Indigo, Epson etc. are currently located in the following countries: Austria, Belgium, Botswana, Brasil, Bulgaria, China, Chile, Croatia, Cyprus, Denmark, France, Germany, Ivory Coast, Guinea, Hong Kong, Hungary, India, Israel, Iran, Italy, Jordan, Kenya, Kyrgyzstan, Latvia, Madagascar, Mali, Malta, Mauritius, Macedonia, Morroco, Netherlands, Nepal, Panama, Romania, Russia, San Marino, Switzerland, Sweden, Serbia, Slovakia, Slovenia, Syria, South Africa, Tahiti, Taiwan, Turkey, UK, Uruguay, USA, Wales

Condition: good (used), Year of construction: 2018, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min COATED WEB BOPP 12 - 80 μ PETP 10 - 30 μ LDPE, LLDPE 30 - 200 μ OPA 12 - 18 μ NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 60 - 150 μ PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ PETP 8 - 30 μ Itedpfxeu Upups Aanjr LDPE, LLDPE 20 - 200 μ OPA 12 - 18 μ NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 20 - 150 μ COEX FILM 25 - 200 μ PAPER 40 - 150 gr/m2

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Itedpfsp Atgbsx Aansr

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Iedpew Ixw Aefx Aanotr Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: new, The Mark Super SV, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super SV ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated depth display, making it ideal for both single-piece machining and small series production. The digital display provides critical information like spindle speed, enhancing operational efficiency and reducing error rates. Standard equipment includes a 3-axis position indicator and a 13 mm drill chuck, ensuring that you have everything needed for high productivity. After 15 years, the Mark Super SV remains a top choice for workshops and training departments. Request a quote today to explore the capabilities of this reliable mill drill in the Milling Machines category. Iodpsqcuc Eofx Aanetr

Condition: new, The Mark Super S, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super S ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated drilling feed and a clear digital depth display for ease of use. The swiveling head allows for extensive maneuverability, while the gearbox milling head delivers powerful machining capabilities. Enhanced productivity is assured with dual gear steps for high torque, a 3-axis position indicator, and an intuitive operator interface. Even after 15 years of popularity, the Mark Super S remains a top choice for workshops and educational settings. Request a quote today to explore the advantages this mill drill can bring to your operations. Itjdpfx Aajqcuc Tjner

Condition: new, The SSB 40 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to finishing operations. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed with an intuitive manual transmission. You can expect exceptional performance for your drilling needs. For more information or to request a quote, consider the SSB 40 F Super VT, a top choice in the Column Drilling Machines category. Itjdpfx Aonp Hymeanjr

Condition: new, The SSB 50 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to industrial construction. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed. For those looking for a high-quality Column Drilling Machine, the SSB 50 F Super VT is an excellent choice. Request a quote today to learn more about this exceptional machine! Ijdjnp Hp Iepfx Aanjtr