Used Super Finishing Machine for sale (66,018)

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. Bwjdpfx Agezuzfheujw - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: as good as new (ex-display), TV25-M PROblue - Mobile polishing and deburring system - Trough vibrator with partition module and soundproof enclosure - Electrical control with stepless frequency control - Integrated dosing pump for process media and additives - Separation and storage unit - Sustainable water treatment Tank volume: 50 liters Bwsdpfjznm Emjx Aguow Usable volume: 36 liters Internal length of the working container: 600 mm Internal width of the working container: 275 mm Internal height of the working container: 325 mm

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet version). The disc speed can be adjusted via a frequency inverter. The Turbo 60 is available in both wet and dry versions. It can be ideally linked with the ERBA YE-60 separation conveyor shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Disc speed: 75 to 300 rpm - Optionally equipped with tilting motor, soundproof lid, or separation box Bodpfx Agsyq Rhlousww As an experienced partner, we provide you with expertise in the field of vibratory finishing. Together, we develop efficient solutions for your optimal process results. All prices are net plus the applicable VAT and shipping costs. The pictures may show the system with accessories that are available optionally and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with advice without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is solely intended as an online presentation of our goods. The contractual negotiation takes place via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, legal notice, and the right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 l Bodsyq Rhxspfx Agueww Description: The ERBA EVP 550 vibratory finishing machine features a flat-bottomed process bowl without an integrated separation unit. Emptying and separation are done via a manual or pneumatic bottom discharge system. Upon request, the machine can be equipped with reinforced suspension and a heavy-duty motor for increased loads. The motor speed can be infinitely adjusted via frequency inverter (optional). An optional fully-automatic PLC control system can also be installed. ERBA vibratory finishing systems are renowned for their durability and longevity, largely due to the hot-cast polyurethane lining of the process bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together, we develop efficient solutions to ensure optimal process results tailored to your requirements. All prices are net, plus the applicable VAT and freight charges. Accessories shown in the images may be optionally available and are subject to additional costs. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (e-mail, telephone, message portal). As a first step, we will send you a non-binding offer, which also includes our general terms and conditions, imprint, and information on the right of withdrawal, prior to any purchase or contractual agreement.

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Bwedpfxoyq Rhrs Aguew Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.

Condition: used, functionality: fully functional, Year of construction: 2018, CNC PIPE BENDING MACHINE, year 2018 Made in China Excellent condition, rarely used Liye DW 63 CNC x 2 AS CNC pipe bending machine – a hydraulic, fully automatic machine designed for precise bending of metal pipes. It provides high repeatability and is used in various industries, such as furniture manufacturing, automotive, and construction. Key technical parameters: • Model: DW 63 CNC x 2 AS Bsdo Ahx Rvopfx Aguoww • Manufacturer: Zhangjiagang Liye Machinery Co., Ltd • Power supply: 380V, 50Hz • Bending capacity (maximum diameter x wall thickness): Ø63 x 2 mm • Automation: Full (CNC) • Control: Bending axis driven by a hydraulic cylinder, feed (X) and rotation (Z) axes driven by servomotors, ensuring high precision. • Materials: Capable of bending steel, stainless steel, aluminum, brass, and copper. • Additional features: Interactive touch screen, programmable springback compensation, automatic mandrel lubrication (optional) • Condition: Used, functional

Condition: good (used), Vibratory finishing machine pre-filter system, filter system, pre-filter tank, water filter for rotary vibrator, vibratory finishing machine, vibratory finishing system, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator Bwsdpfx Agsigamuouow -Pre-filter system: for vibratory finishing machines or other applications -Transport rack: mobile, with 2 filter inserts -Collection container: Volume approx. 350 liters -Overall dimensions: 1400/620/H920 mm -Weight: 106 kg

Condition: good (used), Year of construction: 2011, Heated surfacefinishing machine Bwjdpfefndpnjx Agujw for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: used, functionality: fully functional, 0.75 kW Spray system Flap disc 150/70/25 mm, sisal/leather/synthetic fabric Flap disc 150/70/25 mm, sisal/synthetic Flanges 70 mm reduced to 11 mm (2 pcs), metal Bwedpfx Aoigaf Rjguow Control panel on top 4 motors at 0.18 kW each for the brushes

Condition: new, Year of construction: 2026, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 L Description: The EVP 1500 vibratory finishing machine from ERBA features a flat working tank bottom without separation. It is ideally suited for larger and heavier workpieces. Emptying and/or separation is performed via bottom discharge (manual/pneumatic). Upon request, the machine can be equipped with reinforced suspension and a reinforced motor for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). The system can also be equipped with fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also due to the hot-cast polyurethane lining of the working tank. As an experienced partner, we offer expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net plus the currently valid statutory VAT and plus freight costs. Items shown in pictures may include accessories that are optionally available and subject to additional charges. The quoted price refers to the base machine. Bsdpfxjyq N Dre Agueww If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, along with information on our general terms and conditions including imprint and the right of withdrawal, before any purchase/contract conclusion occurs.

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation facility. It is equipped with an easily interchangeable screening unit and stands out for its high operational efficiency, thanks to the integrated drop step. Emptying or separation is performed via the integrated flap (manual/pneumatic). For higher load requirements, reinforced suspension and a heavy-duty motor can be fitted upon request. The motor speed can be steplessly adjusted using a frequency inverter (optional). Owing to its side discharge, the EVP-RA 550 can be linked with other machines to form a processing line. The system can also be supplied with a fully automated PLC control unit (optional). ERBA vibratory finishing systems are renowned for their durability and long service life, which is largely due to the hot cast polyurethane lining of the process chamber. Bedpfx Asyq Rguegueww Technical specifications: - Gross volume: 550 liters - Channel width: 390 mm - Imbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together, we develop efficient solutions to achieve optimal process results for your application. Prices are net, excluding the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories that are available separately and subject to additional charges. If you are interested, please do not hesitate to contact us. We are happy to offer you free and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. The contract negotiation takes place via telecommunication (e-mail, phone, messaging portal). As a first step, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal prior to any purchase or contract conclusion.

Condition: new, Year of construction: 2026, The ERBA Vibratory Finishing Bell TAM 220 is perfectly suited for surface finishing of very small, thin, or delicate parts, but is also ideal for movable and solid components such as chains. It is equipped with a frequency inverter for stepless adjustment of the motor speed, a digital process timer, and a dosing pump. Thanks to variable speed control, the machine delivers the required precision and is particularly suitable for extended processing times without operator intervention. Technical specifications: - Gross volume: 220 L - Motor power: 2.2 kW - Weight: 475 kg - Motor speed: 0 to 45 rpm As an experienced partner, we provide expertise in all aspects of vibratory finishing. We collaborate with you to develop efficient solutions for optimal process results. Bwsdpfxoyq Rhfe Aguew All prices are net plus the currently applicable statutory value-added tax and shipping costs. Accessories shown in the images may be optional and subject to additional charges. If you are interested, we look forward to your enquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, during which we will also inform you of our general terms and conditions including our legal notice and the right of withdrawal, before the purchase/contract conclusion takes place.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 550 vibratory finishing machine features a flat-bottom working tank with separation capabilities, designed for processing medium to large parts. It is equipped with an easily exchangeable screening unit. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously regulated using a frequency inverter (optional). Thanks to the lateral discharge, the EVP-RA 550 can be linked with other machines for integrated operation. The system can optionally be equipped with a fully automatic PLC control unit. ERBA vibratory finishing systems are known for their durability and reliability, supported by a hot-cast polyurethane lining in the working tank. Technical data: - Gross volume: 550 L Bwsdpjyq Rh Ssfx Aguew - Working channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm - Tank inner diameter: 1,400 mm As an experienced partner, we provide comprehensive expertise in vibratory finishing technology. Together with you, we develop efficient solutions to achieve optimal process results. Prices are net plus statutory VAT and shipping costs. Images may show the system with accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which also includes our general terms and conditions, legal notice, and information about your right of withdrawal, before any purchase/contract is concluded.

Condition: used, Year of construction: 2010, machine/vehicle number: ET243, Used METTISIGILLO ETIPACK Super 1.3 - 2.5 labeller machineTechnical Specifications & Performance DataThis Etipack Super 1.3 – 2.5 tax stamp labeling machine is engineered for high-speed seal application on multiple container materials used in beverage production and industrial packaging. Designed for reliable performance in second hand and used bottling line environments, it offers robust productivity with precise label placement.Manufacturer: EtipackModel: Super 1.3 – 2.5Year of construction: 2010Machine type: Tax stamp labeling machine with double headMaximum speed: 32000 bphLabel type: Tax stamp/seal, Autoadhesive L-shaped sealMaximum roll diameter: Ø 400 mNumber of reels: 1Compatible containers: PET, Glass, Aluminum cansElectrical supply: 400 V, 3 PH, 50 HzCurrent draw: 10 ACompressed air pressure: 7 barAdvanced Automation & Control SystemsThe Super 1.3 – 2.5 integrates dependable automation for consistent tax stamp application at high throughput. Its dual-head configuration supports continuous operation and quick alternation to minimize downtime. The electrical system operates on 400 V three-phase, 50 Hz, enabling smooth integration into standard industrial power grids. Operator-focused controls facilitate setup, alignment, and calibration for different products and production runs.Production Line Integration CapabilitiesBuilt for flexible integration, this labeling machine can be installed as a standalone unit or inline within a complete packaging or used bottling line. It interfaces well with upstream filling and capping equipment and downstream inspection and case packing systems typical in beverage production. Suitable for PET, glass bottles, and aluminum cans, it allows multi-product operations across water, beer, wine, spirits, milk, and soft drinks.Machine Condition & Maintenance HistoryThe machine is overhauled, guaranteed, and ready for use. It is offered in excellent working condition, supported by a 6-month warranty and compatible spare parts. This ensures fast commissioning and reliable performance for second hand industrial packaging operations seeking minimal startup times.Operational Performance & VersatilityOptimized for tax stamp/seal application, the Etipack Super 1.3 – 2.5 delivers accurate placement at high speeds. The double head enhances uptime and throughput, particularly valuable for high-volume beverage production. Its capability to run PET, glass, and cans extends its utility across multiple SKUs and packaging formats. Typical applications include water (still and sparkling), beer, wine, spirits, milk, and soft drinks within modern bottling equipment environments.Installation Requirements & Site PreparationInstallation requires standard industrial utilities: 400 V three-phase 50 Hz electrical service and 7 bar compressed air. The compact footprint supports straightforward placement on existing conveyor systems. Ensure adequate clearance for roll loading, operato... Bwodpfx Agj Ady D Eeuow

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal Bsdpfx Agozf Nk Tsueww No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Year of construction: 1994, condition: reconditioned (used), Superfinishing Machine Bwedpfsxfwflox Aguew Manufacturer: SUPFINA Type: SM688 Retrofit Year of manufacture: 1994 / Retrofit 2018 Technical data: - Workpiece length: 600 mm Total weight: approx. 4,985 kg Equipment & accessories: - 160 mm jaw chuck In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, pictured tools, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: new, Year of construction: 2026, Machine type: BPT 1000 Manufacturer: ERBA Power: 2 x 5.5 kW Total volume: 1,000 L Description: The ERBA BPT 1000 twin-motor long trough vibratory finishing machine is ideal for ball polishing or processing heavy workpieces. Thanks to its two motors, it can handle even particularly heavy media loads and applies the necessary pressure to the workpieces. It is equipped with a durable hot-cast polyurethane lining. Emptying or separation is performed via a bottom outlet (manual/pneumatic). The process chamber can be partitioned using removable dividers, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be fitted with fully automatic PLC process control. The motor speed can be infinitely adjusted by means of a frequency converter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The listed price is net, plus the currently applicable statutory VAT and freight costs. The pictures may show the system including optional accessories, which are available at additional cost. The quoted price refers to the base machine. The photos are for illustrative purposes. Actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We are happy to provide you with a consultation, with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer is for presentation purposes only. Contract negotiations take place via telecommunication (Email, phone, messaging portal). Initially, we will send you a non-binding quote, along with our general terms and conditions including imprint and information on the right of withdrawal, before any purchase/contract is concluded. Bjdsyq Rcpjpfx Agujww

Condition: new, Year of construction: 2026, Machine type: ESA 15 Bwodpfx Aeyq Rd Tegusw Manufacturer: ERBA Power (kW): 3.37 Sludge basket volume: 15 L Description: The ERBA ESA 15 circulation centrifuge (Patent No.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It features a wastewater tank with agitator as well as a clean water tank and is capable of producing up to 600 L of fresh water per hour. Contaminant particles are separated from the process water using centrifugal force of 1500 g and removed as solid cake. The machine is easy to operate thanks to the programmable logic controller (PLC) with touchscreen interface. The ESA 15 also stands out for its compact design, making it extremely space-saving. As an experienced partner, we provide you with expertise in all areas relating to vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The stated price is net, excluding the currently applicable statutory VAT and shipping costs. Some images may show the system including optional accessories, which are available separately and may incur additional charges. The listed price refers to the base machine only. If you are interested, please do not hesitate to contact us. We will be happy to advise you, without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is for online presentation purposes only. Contract negotiations take place via telecommunication (email, phone, messaging platform). In the first instance, we will provide you with a non-binding offer, along with our general terms and conditions (including legal notice) and information about your right of withdrawal, prior to the conclusion of any purchase or contract.

Condition: new, Year of construction: 2026, Machine type: EVP-RA 1700 Manufacturer: ERBA Power kW: 11 Total volume: 1,750 l The EVP-RA 1700 vibratory finishing machine from ERBA is equipped with a rising process bowl floor with integrated separation. It features an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is available as an option. The machine offers high operational efficiency thanks to its integrated drop step. The emptying and/or separation process is carried out via the integrated flap (manual/pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be adjusted steplessly via frequency inverter. The EVP-RA 1700 can be linked with other machines via its side discharge. As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and shipping costs. The images may show the system including optional accessories which are available separately and may incur additional costs. The listed price refers to the base machine. The photos are for illustration purposes only; actual appearance and size may differ from the images. Bwsdpfx Ajyq Rauogusw If you are interested, we look forward to your inquiry. We are happy to provide you with professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (OS platform). This offer serves exclusively to present our products. Contract negotiations are concluded via telecommunications (email, telephone, messaging portal). As a first step, we will send you a non-binding offer, in which we will also inform you of our general terms and conditions, legal notice, and right of withdrawal before any purchase/contract is concluded.

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Bwodpfxjpr Utls Aguew Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System Bsdpjzv Tg Tsfx Agusww - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. Bwodpfozzlqnox Aguew The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Bwedpfx Ajy R Eclegusw Manufacturer: Vibrochimica Type: VBT-2E 650/3 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2002 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1360 mm Torus Ø: 430 mm The surface of the Pu lining is damaged and in a repaired condition. Recorded in pictures.

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater Bedpfx Aox Hh A Hegueww • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Bjdpfxeg Umitj Agujww Accessories: with magazine