Used Swing Saw for sale (8,319)

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Chjdpjwini Ejfx Andod Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Cutting width max. 1500mm Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° 2 Motors x 4,0kW (5,5 HP) Csdpfx Asxtxh Dondehd Good condition. Available immediately.

Condition: new, Band saw blade Make Röntgen Type bi-alfa cobalt Cjdpfxerwl R Nj Andjhd Dimensions :4860 x 34 x 1.1 mm 3/4 Combi 10 unused, out of magazine

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Cedpfjr Ik Sqsx Andshd Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. Cjdpfjzp Iu Sox Andshd *

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: - track width 400mm - working width of the roller 400mm - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES – Made in Italy – New track and slides – Very good condition Chedpfx Aezx Rqhjndod – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2002, Used Machine Year of manufacture: 2002 Features and technical specifications: - Cutting area: 4200 x 4200 mm - Maximum cutting height: 80 mm Chsdpfszycqvsx Andjd - Saw blade overhang: 92 mm - Main saw motor: 11 kW - Scoring saw motor: 2.2 kW - Total electrical power rating: 19.5 kW, 41 amps - Required air pressure: 8 bar - Exhaust capacity: 4,000 m³/h - Sawing speed, continuously variable: 0–70 m/min - Rip fence speed: 0–80 m/min (maximum output: 25 m/min) - Main saw blade: 350 x 4.4 x 30 T 72 TF - Scoring saw blade: 180 x 4.4/5.4 x 30 T 28 VR (tapered) - Weight: approx. 6,000 kg

Condition: used, Year of construction: 2000, without mounting table, roll diameter: 800 mm, stand side on the left, belt guide at the top and bottom, APA motor: 4.0 kW with motor brake and emergency stop switch, cutting speed: 1650 m/min, cutting height: 390 mm, cutting width: 780 mm, blade length: max. 5600 mm, weight: approx. 500 kg, dimensions: 1310 x 950 x 2380 mm. Location: n Chjdpfe Aay Ebjx Andsd

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Location: Nattheim. Chodpfx Aoy R Tqkonded

Condition: used, Year of construction: 1970, machine/vehicle number: 251, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 380 V, input current: 36 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 180 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, saw blade bore: 55 mm, rotational speed (max.): 2,920 rpm, Used, functional underslab multi-blade saw "SENDEN" with mounted feed unit "ROMA" Spindle diameter 45 mm, incl. 4 saw blade clamping sleeves with 55 mm diameter (suitable for circular saw blades with a 55 mm bore). No spacer rings or saw blades are included. Drive motor 36.5 A / 18.5 kW. 2920 RPM. The machine is designed for a cutting height of up to approx. 80 mm. Saw blades of approx. 250 - approx. 400 mm can be used. 4 clamping sleeves are included in the scope of delivery. Original technical documentation is not available. Chsdpfj Agu Txex Andjd Please refer to the photos! Sale is as is. No warranty for defects. The machine can be inspected (power is connected). Mounted 4-roller feed unit ROMA Type DVPF 0810-4/2 with ribbed feed roller rollers. Feed speeds can be directly selected. Electrical power 0.88/1.25 kW.

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - track width 340mm - shaft width 340mm - disc bore diameter 80mm - discs mounted on the upper shaft 350mm - discs mounted on the lower shaft 300mm - max cutting height 200mm - min workpiece length 700mm – top - 2 rows of feed rollers - smooth, sliding, pressure shaft Csdpfxszxqq Is Andjhd - feed rollers - 2 smooth, sliding, pressure shafts - shaft with saws - 3 smooth pressure rollers – bottom - track - shaft with saws - track - stepless feed speed adjustment - main motors 2x approx. 55kW - feed motor 3kW - electric lifting of the machine body up/down - manual adjustment of the saw shafts - central lubrication - diameter of dust extraction nozzle 2x200mm - dimensions L/W/H 2700x1800x2150mm - weight approximately 5000kg ADVANTAGES – German production – two-shaft – 2x55kW motor – multi-saw, used, very good condition Net price: 178900 PLN Net price: 41600 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Chjdpfevrvqwjx Andod Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Csdpfx Aovrvq Dendshd Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. Chedpfx Aou Nigwjndod *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm Chedpfju Niuzjx Anded cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. The table is tiltable. Chodpfju Niu Uex Andjd *

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch Chedpfx Anevyidmsdjd • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min Chsdpfx Aj Ahfcxjnded . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 03 267989, spindle motor power: 5,100 W, Equipment: saw blade guard, Radial cutoff saw designed for precise cutting of wood, composite materials, and materials with similar properties. The saw's main advantages are its high cutting accuracy, the ability to swivel the guide arm to both sides, and the tilting of the saw head. The smooth operation of the cutting unit is ensured by eight bearings, which are guided at an angle of 45° along steel guides. Max. blade diameter: 400 - 450 mm Cutting height: 125 - 150 mm Arm length: 1100 mm Motor power: 5.14 kW Cast iron arm, swiveling +/- 60° Tilting saw head +/- 45° Cjdpszu Rv Aofx Andehd Rotating head +/- 90° CE safety standard Weight: 375 kg Year of manufacture: 1999

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Sliding table length: 3200 mm Cutting width with parallel fence: 1050 mm Motor power: 7.5 kW Chedps Ahhmisfx Anded Scoring unit Height and swivel adjustment via foot-operated hydraulic system Digital display for parallel fence Duplex miter fence The machine will be available from January 2027.

Condition: new, Year of construction: 2026, 5 machines in stock, Behringer Eisele VMS 350 in standard configuration, new machines, including 1 saw blade and full warranty. Top prices! Equipment: High-performance circular sawing machine, type VMS 350 – with pole-changeable three-phase motor, 400 V, 50 Hz, 1.4/1.9 kW, including clamping device Chjdpj Adp Erjfx Andjd on the left and right of the saw blade, speed 17/34 rpm, with integrated coolant system, including electrical equipment according to VDE 0.113, machine design CE-compliant and ready for operation. Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Maximum cross-section for machining, round at 90°: 120 mm Maximum cross-section for machining, rectangular at 90°: 170 x 100 mm Maximum cross-section for machining, round at 45°: 120 mm Maximum cross-section for machining, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade width: 3 mm Bore diameter: 40 mm Adjustable saw blade speed: 17 rpm / 34 rpm Machine top part swivels: 45-90-45-30° Total motor power: 1.4/1.9 kW Width: 900 mm Length x Width x Height: 1050 x 900 x 1900 mm

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner Chodpfx Ae Afznujndsd A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, right-hand fence with motorized adjustment up to 1500mm, 1.3KW scoring saw, 2-axis, electrically adjustable, 9KW motor, 3 speeds, max. saw blade diameter 450mm, Fence with electronic displays. Chjdpfx Aj Ahm R Tjndjd Used machine, very good condition.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, Equipment: CE marking, documentation/manual, saw blade guard, STRIEBIG STANDARD III – vertical panel saw For sale: a STRIEBIG STANDARD III vertical panel saw. This machine comes from the renowned Swiss manufacturer STRIEBIG, a leader in the production of vertical panel saws. It is ideally suited for cutting furniture panels, MDF, HDF, plywood, chipboard, laminated boards, and plastics. The saw is fully functional and ready for use. It is currently in use at our company and can be inspected while in operation. Cedpfx Anszizy Iedohd Technical data: Manufacturer: STRIEBIG AG (Switzerland) Model: STANDARD III Power supply: 400 V Frequency: 50 Hz Saw blade diameter: Recommended: 300 mm Minimum: 290 mm Saw blade speed: 4750 rpm Vertically moving cutting carriage Mechanical pre-cutting device Original chip extraction system Robust steel construction Precision guides Panel stops Clear control panel Safety switch Working area Based on the photos: Cutting length approx. 5300 mm Cutting height approx. 2200 mm (Please provide exact dimensions if required). Technical condition 100% operational Ready for use without any additional work Regularly serviced Can be tested during operation Very precise and stable Application Ideal for cutting: Furniture panels MDF Plywood OSB boards Laminated boards Plastics

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - max. cutting height: 120mm - roller width: 510mm - roller diameter: 75mm - max. saw blade diameter: 400mm – Top: - feed fingers/ejectors, 2 rows - driving roller, toothed - driving roller, toothed, outfeed – Bottom: Chsdpfezxrd Nsx Andjd - feed fingers/ejectors - 2 driving rollers, toothed - saw blade roller - driving roller, toothed, outfeed - 6 feed speed settings - hydraulic motor (feed, infeed, rollers): 3kW - main motor: 22kW - stepless feed speed adjustment - control panel stand dimensions: 700x600x1000mm - overall dimensions (L/W/H): 2300x1450x1600mm - weight approx. 2650kg ADVANTAGES - Made in Turkey - Robust construction - Used machine, very good condition Net price: 37900 PLN Net price: 8800 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with larger fluctuations)