Used T45 for sale (180)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, machine/vehicle number: FJ.DKA0-000212, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Csdpfx Aszw Ak Rjizsri Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: used, Year of construction: 1988, used, good condition cleaned, tested manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm Crjdevwf Tropfx Aizsi required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg total connected power ca. 1,5 kW located in 97447 Gerolzhofen sale in current condition as on Foto seen - free on truck -

Condition: used, mileage: 1,98,035 km, power: 332 kW (451.39 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 13,250 kg, maximum load weight: 12,750 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,500 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 5,100 mm, loading space width: 2,430 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, low noise, trailer coupling, Vehicle location: Bovenden, steel superstructure, mtl. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, compressed air horn, switch 16, ABS (anti-lock braking system), constant throttle, raised exhaust, differential lock, rotating beacon, storage box, leaf suspension, on-board matics left, towbar air-light-hydr, low-noise G1, folding U-protection, roof hatch, green environmental badge Wheelbase: 3500 mm Body: Dautel 3-sided tipper body with Bordmatik left 50er AHK, turbocharger and clutch 2023 repaired for approx. 6,000 EUR, valves for tipper changeover new. Loading height approx. 1590mm! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! - . Codpfjvhnllox Aizsri

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - blade length 530mm Csdpfx Aijzx Rnmszeri - number of blades 2 pcs - screen dimensions 65x65mm - toothed pulling shaft, bottom - lower shaft motor 2.2kW - toothed pulling shaft, top - upper shaft motor 2.2kW - belt conveyor - length of conveyor belt 2200mm - width of conveyor belt 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approximately 3000kg ADVANTAGES - German-made - auto-reverse (adjustable) - DTR documentation - used shredder, very good condition Net price: 75900 PLN Net price: 17650 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 3,900 kg, Paper Roll Clamp Crsdpfx Aex N U Syjizsi ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical Condition: Good Description: Year 2019 ISO 3A (51 cm) Capacity 3,900 kg Rotator 360° Opening range 220–1,450 mm Width 1,000 mm ID OS1769

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 3,900 kg, Paper roll clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Crodpfjx N U S Hjx Aizoi Description: Year 2019 ISO 3A (51 cm) Capacity 3,900 kg Rotator 360° Opening range 220-1450 mm Width 1,000 mm ID OS1770

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P140/9/SG51/1K/RT45 Crsdpfx Ajxyt Tbeizji Baujahr: 2001 Medium: Wasser Temperatur: 140° C Heizleistung: 9 kW

Condition: used, mileage: 2,20,918 km, power: 331 kW (450.03 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 14,840 kg, maximum load weight: 17,160 kg, overall weight: 32,000 kg, axle configuration: 8x4, next inspection (TÜV): 04/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, steel body, crew cab, 1x air-suspended seat, heated seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, automatic transmission, differential lock, fog lights, rotating beacon, leaf suspension, Bordmatik left, air and light connections for trailer coupling, aluminium tank, roof hatch, green environmental badge. Body: Meiller three-way tipper body with Bordmatik left. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors reserved! Credoydfkhjpfx Aizei

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools Crjdpfex Emviex Aizsi as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, mileage: 4,10,410 km, power: 332 kW (451.39 HP), first registration: 07/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,500 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, 1x sleeper bunk, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle brake, PTO (power take-off), automatic gearbox, differential lock, fog lights, high beam headlights, work lights, rotating beacon, storage box, leaf-air suspension, trailer coupling air+light, aluminium tank, low-noise G1, underbody protection, lateral aluminium underrun protection, roof hatch, green environmental badge. Wheelbase: 4500 mm. EEV engine! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to modifications, prior sale and errors excepted! Crjdpfx Aiex Rhp Iozji

Condition: used, mileage: 1,98,035 km, power: 332 kW (451.39 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 9,800 kg, maximum load weight: 16,200 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,500 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, low noise, trailer coupling, Vehicle location: Bovenden, mtl. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, air horn, switch 16, ABS (anti-lock braking system), constant throttle, auxiliary drive, exhaust raised, differential lock, rotating beacon, storage box, leaf suspension, tow bar air-light-hydr., low-noise G1, folding U-protection, roof hatch, environmental badge green Wheelbase: 3500 mm 50er AHK, turbocharger and clutch repaired in 2023 for approx. 6.000,- EUR. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Csdpfxovhnlrj Aizjri - .

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Credpfozb Rbtjx Aizoi Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: ready for operation (used), Year of construction: 2019, operating hours: 42,874 h, working width: 300 mm, cutting length (max.): 6,300 mm, workpiece width (max.): 120 mm, cutting speed: 3,00,000 mm/min, Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details. • Working Height: 900 mm • Feed Direction: Left-hand feed • Blade Diameter: 500 mm • Blade Bore: 30 mm • Input Length, Min.: 500 mm • Input Length, Max.: 6,300 mm • Wood Width, Min.: 30 mm • Wood Width, Max.: 310 mm • Wood Thickness, Min.: 12 mm • Wood Thickness, Max.: 120 mm • Maximum Rectangular Wood Section: 310 × 12 mm • Maximum Rectangular Wood Section: 190 × 120 mm • Minimum Fixed Length After Sawing: 150 mm Crsdpfozwu Hwsx Aizji • Minimum Fixed Length at End of Board: 180 mm • Maximum Board Curvature: 10 mm/m • Length Tolerance: ±3 mm • Cutting Thickness Accuracy: ±0.8–1.5 mm • Feed Speed, Continuously Adjustable: Max. 300 m/min • Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec. • Saw Motor Power: 7.5 kW (10 HP) • Feed Motor Power: 5.0 kW (7 HP) • Vario Conveyor Motor Power: 2.5 kW (3.4 HP) • Electrical Connection: Approx. 18 kW • Operating Voltage: 400 V / 50 Hz • Control Voltage: 230 VAC / 24 VDC • Nominal Current: 30 A • Fuses: 35 A • Compressed Air Consumption: Approx. 1,200 Nl/min • Operating Pressure: Approx. 8 bar • Extraction Air Velocity: Approx. 30 m/sec. • Extraction Air Volume: Approx. 1,800 m³/h • Sorting Conveyor Width: 250 mm • Usable Conveyor Width: 210 mm • Maximum Workpiece Width: 300 mm • Exit Conveyor Length: 7.5 m • Automatic Width Measurement: Laser distance sensors • Width Measurement Accuracy: Max. ±2 mm • Number of Active Products: Max. 16 • Minimum Wood Thickness for Measurement: 12 mm • Scrap Pit Width: 250 mm • Maximum Scrap Length: Approx. 120 mm • Heavy-Duty Ejector: For workpieces over 20 kg • Ejector Plate Height: 80 mm • Writing Length: Workpiece length − 10 mm • Control Panel: OptiCom Pro 18.5" • Display Type: Industrial TFT touchscreen • Display Resolution: 1366 × 768 pixels • Front Protection: IP65 • Board Infeed Capacity: Up to 6.3 m • Marking Station: 2 marking positions • Marking Bench Length: 5 m • Electrical System: 400 V / 50 Hz • UPS: 24 V supply • Operating Hours: 42,874 h

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Cjdpezzzpgofx Aizeri Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Research and development Scope of delivery: 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, functionality: fully functional, machine/vehicle number: 04217, For sale is a reliable and robust temperature control unit from Regloplas, model 90S. Used condition, with age-appropriate signs of wear on the housing. 3 units available. Technical data Credpfx Aisy E Hzrozoi Type: 90S / 6 / TS22 / 1K / RT45 Max. temperature: 90 °C Heating capacity / power rating: 7.1 kW Voltage: 400 V / 3 PE (three-phase) Frequency: 50 Hz Current: 11 A Filling volume: 3 l Wiring diagram no.: 04217

Condition: used, mileage: 8,725 km, power: 332 kW (451.39 HP), first registration: 02/2024, fuel type: diesel, empty load weight: 14,500 kg, maximum load weight: 10,500 kg, overall weight: 25,000 kg, tire size: 365/85R20, axle configuration: 6x6, wheelbase: 4,200 mm, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, parking heater, trailer coupling, Vehicle location: Bovenden, warehouse, 2 comfort seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, ABS (anti-lock braking system), raised exhaust, automatic transmission, differential lock, fog lights, leaf spring suspension, central locking, green environmental badge. Crjdpszuc Ikjfx Aizsi Wheelbase: 4200 mm, body: platform length approx. 6m, ex-German Armed Forces, like new condition! ANH coupling type K4D, rear frame overhang 2073 mm, fuel tank 390l, aluminum, hill start assist, engine Cursor 13 (Euro 6), intake air heater, fully automated ZF EuroTronic-16AS2630-16-speed transmission, central locking with remote control, technically permissible total weight is 30,000 kg, HR-TP wheel hub drive! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 8,725 km, power: 332 kW (451.39 HP), first registration: 02/2024, fuel type: diesel, empty load weight: 14,500 kg, maximum load weight: 10,500 kg, overall weight: 25,000 kg, tire size: 365/85R20, axle configuration: 6x6, wheelbase: 4,200 mm, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, parking heater, trailer coupling, Vehicle location: Bovenden, storage area, 2 comfort seats, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, radio, cruise control, ABS (anti-lock braking system), raised exhaust, automatic transmission, differential lock, fog lights, leaf spring suspension, central locking, green environmental badge. Crodpfx Aozt S Drsizji Wheelbase: 4200 mm, body: flatbed approximately 6m long, ex-German Armed Forces, like new condition! ANH-COUPLING TYPE K4D, rear frame overhang 2073 mm, fuel tank 390l, aluminum, hill start assist, engine Cursor 13 (Euro 6), intake air heater, fully automated ZF EuroTronic-16AS2630-16-speed gearbox, central locking with remote control, technically permissible total weight is 30,000kg, rear power take-off. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Crsdpfx Ajk Aa Eieizsi Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), power: 40 kW (54.38 HP), fuel type: diesel, fuel tank capacity: 65 l, color: other, lifting height: 2,780 mm, General information Year of construction: 2023 Operating hours: 328 Technical information Number of cylinders: 4 Engine capacity: 2.393 cc Steering: skid steer Engine type: Bobcat DM02VB Empty weight: 2.961 kg Dimensions (LxBxH): 322 x 140 x 198 cm Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Quick change - Radio - Rubber tracks - Two Speed - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V Crodpfx Asz Uxi Neizji General Country of production: Czech republic Condition CE type: CE Deluxe display, SJC joystick control, 2 driving speeds, enclosed cab

Condition: used, Manufacturer: HYUNDAI Model: KIT 450 Type : CNC Cnc : FANUC 0i- TB Max. Diameter allowed on bed : 530 mm Max. Turning diameter : 170 mm Maximum turning length: 190 mm Bar passage diameter : 45 mm X axis : 450 mm Z axis : 300 mm Codpjxr A N Aofx Aizjri Spindle speed : 60-6000 rpm Table dimensions : 550 x 2200 mm Number of Slots : 3 Slots diameter : 14 mm

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1800-1220-550 RA1148 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1300 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Cjdpfx Ask Aa Efjizori With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Saddle stitcher Heidelberg Stitchmaster ST 450 Year: 2008 Operation / Control - Colour monitor - Semi automatic setting Feeders - Number of chain stations: 8 - Hand feeding station(s) - Horizontal signature feeders: 1 x DHU 450 - Vertical signature feeders: 4 x DVU 450 - Cover feeder: CHU 450 - Excl. Pump(s) Stitching unit Heidelberg Stitchmaster ST 450 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 150 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left Technical specifications: Cjdpfxeh Ezmis Aizsri Max. mechanical speed 14.000 cycles/hour Sizes (uncutted) Max. 320 x 480 mm Min. 85 x 128 mm Sizes (cutted) Max .315 x 475 mm Min. 80 x 120 mm Product thickness: max 12 mm

Condition: new, functionality: fully functional, working width: 450 mm, area performance: 495 m²/h, overall weight: 55 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 45 l, TASKI PROCARPET 45 PROFESSIONAL CARPET AND RUG CLEANER TECHNICAL DATA: Model: Procarpet 45 Manufacturer: Taski Type: Carpet and rug cleaning machine Country of manufacture: Switzerland Series: Professional Condition: NEW Theoretical capacity: 495 m²/h Weight when empty: 55 kg Working width: 450 mm Brush motor: 650 W Suction motor: 1000 W Solution tank: 45 l Waste tank: 45 l Brush speed: 1000 rpm Brush pressure: 10-17 kg Cable length: 15 m Rated voltage: 230 V Dimensions: 82 x 56 x 86 cm (L x W x H) WHY CHOOSE THE TASKI PROCARPET 45 The Taski ProCarpet 45 combines high performance, versatility, and professional cleaning quality. Designed for large surfaces, its 45 cm working width and large tanks (45 liters each) allow for long-lasting cleaning without interruption and increase work efficiency. One of its greatest advantages is the 2-in-1 system, which allows you to choose between a thorough extraction wash and a quick capsule cleaning. In practice, this means you can adjust the method to the level of dirt and time – from deep cleaning to quick refreshment with a short drying time. Another major advantage of this machine is its efficiency. The cylindrical brush and powerful suction system with two suction points ensure thorough dirt removal and very good carpet drying, resulting in a better end result and a faster return to use. Ease of use and ergonomics. - The control panel is intuitive and simple, and the device's design provides excellent visibility of the working area. Professional cleaning. - The machine is equipped with a 45 cm diameter brush and a 45-liter tank, perfectly combining compactness with the ability to clean larger surfaces. Crodpfxjy Aw A Uo Aizji Designed for everyday, intensive use. - The Taski Procarpet 45 is a robust, durable, and reliable device, designed for long life and professional use.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 10,868 h, lifting height: 4,150 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork length: 1,100 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 7,066 kg, MACHINE: Forklift BRAND: Toyota MODEL: 8FBMT45 CONSTRUCTION YEAR: 2017 ENGINE: Electric HOURS: Key On 10868 HOURS DRIVING: 6455 HOURS LIFTING: 1631 TRANSMISSION: Automatic MAST: 3 stages, free lift ATTACHMENT: Side shift, fork positioner CAPACITY: 4500kg LIFTING HEIGHT: 4150mm Crjdoxp E Rwspfx Aizsi CLOSED MAST: 2210mm HYDRAULIC VALVES: 4x FORKS: Yes, 1100mm TIRES TYPE: Solid rubber, good ID43784

Condition: used, Die SMIPACK FP 560a ist mit Ihrer kompakte Bauweise besonders für die Verpackung von Lebensmitteln, CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the SMIPACK FP 560a is particularly suitable for packaging Food products, CDs, DVDs, books, picture frames or other compact items. Winkelschweissmaschine mit Schrumpftunnel - Shrinkwrapper with Shrink Tunnel SMIPACK FP 560a - T450 Csdpfx Ajzhmgdeizsri Baujahr / Year 2017 - Serial-No. 64231 Schweißrahmen max. 560 x 430mm Produkthöhe / Product high max. 230mm Folienbreite / Foil width max. 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Universal-Schrumpftunnel SMIPACK T 450 Produkthöhe / Product high max. 230mm Produktbreite / Product width max. 400mm Bandgeschwindigkeit / Band Speed 3 - 18m/min. Tunnel-Abschaltautomatik / Automatic tunnel shut-off Digitale Tunneltemperatureinstellung / Digital tunnel temperature setting Geschwindigkeit des Tunnelförderbandes stufenlos regulierbar / Tunnel conveyor belt speed continuously adjustable Abmessungen Maschine o. Auslaufband, L x B x H 1.310 x 835 x 1.440 mm Nettogewicht Maschine 187kg Stromanschluss 380-415V, 50-60 Hz Nennleistung 8.000 W / Power connection 380–415 V, 50–60 Hz; rated power 8,000 W Mit der SMIPACK FP 560 A lassen sich sowohl PVC-, PE-, PO-, LDPE-, OPP-, CCP-Folien, alle siegelfähigen Feinschrumpffolien, als auch mikroperforierte und lebensmitteltaugliche Folien verarbeiten. The SMIPACK FP 560 A can process PVC, PE, PO, LDPE, OPP, and CCP films, as well as all sealable fine shrink films, micro-perforated films, and food-grade films. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test