Used Table Boring Machine for sale (66,752)

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. Nodpfoynv E Rox Ah Rekw On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg Nsdpfxewnbfkj Ah Rskw

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Nedpfx Ahekv Uq Io Rjkw Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Nksdpjkwb Diefx Ah Row Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 Nedpfovzrx Nsx Ah Rskw The machine is ready for use and fully functional Technical data: HAUSER OP3 coordinate drilling machine Table: 550 x 320 mm Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Distance from table to spindle: 600 mm Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Nedpfx Aouuh Suoh Rokw Height: 25 cm

Condition: used, Year of construction: 1994, used, in good condition with base cabinet – drawers, incl. various drill bits / mobile Make: Rexon Nkodpfx Ajythdish Row Model: OPTI B20T / RDM80B Year of manufacture: 1994 Machine no. Spindle taper MK2 Keyed drill chuck 20 mm Throat 150 mm Speed settings: 12 steps Table size 250 x 250 mm Drill table tiltable +45° – -45° Space requirement approx. 700 x 600 x 1000 mm Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Sale as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Year of construction: 2005, Lot consists of: (1) 5-Axis Oil Hole Boring Machining Center Njdpfxjym Snxo Ah Rjkw Technical Details: X/Y/Z 500/150/765 mm, B-axis rotary table with A-axis unit for part size 630 x dia 190 mm, spindle 8,000 rpm / HSK-63-A, 12-position automatic tool changer (ATC), CNC GE-FANUC 160i-MB, dimensions (LxWxH) approx. 2x4x3 m

Condition: used, Year of construction: 1999, plate width 2980 mm Nodpfx Aegxqvzsh Rskw plate depth 3000 mm plate height 1400 mm total power requirement 11 kW

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Nkodpfelhwr Rex Ah Rew good condition

Condition: ready for operation (used), functionality: fully functional, AYEN push-rod drilling unit electro-pneumatic push-rod drilling unit Nedsqv Ey Uopfx Ah Rokw various types 2 units RPM 1C, 0.73 kW – €450 each 1 unit RPM 0.5C, 0.37 kW – €400

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, travel distance W-axis: 1,200 mm, MAKE: PAMA MODEL: SPEEDRAM 4 CATEGORY: Floor Type CNC Boring Mill YEAR OF MANUFACTURE: 1999 CNC CONTROL: Siemens Sinumerik 840C Spindle Internal Boring Spindle Taper: ISO 50 Boring Spindle Diameter: Ø 180 mm Spindle Speed Range: 2 – 1,600 rpm Spindle Motor Power: 100 kW Machine equipped with through-spindle coolant Working Capacity X Axis (Column Longitudinal Travel): 13,000 mm Y Axis (Head Vertical Travel): 5,000 mm Z Axis (Ram Cross Travel): 1,000 mm W Axis (Quill Stroke): 1,200 mm V Axis (Table Cross Travel): 3,000 mm Ram Section Dimensions: 440 x 500 mm Machine equipped with Heidenhain linear scales on all axes Table & Floor Plates Rotary Table Dimensions: 4,000 x 4,000 mm Rotary Table Load Capacity: 80 tons Rotary Table Continuous Rotation: 360,000 positions, minimum angle 0.001° Number of Floor Plates: 2 Each Floor Plate Dimensions: 7,100 x 2,400 mm Total Floor Plate Area: 7,100 x 4,800 mm Accessories Chip conveyor Coolant tank with high-pressure pump for through-spindle coolant (CTS) Njdpfsyari Aox Ah Rokw 1 x 90° milling head, indexing every 2.5° (C axis) Spindle oil chiller and hydraulic unit Operation manuals and electrical schematics

Condition: used, Year of construction: 1986, spindle diameter 1 mm x-travel 1 mm y-travel 1 mm total power requirement 1 kW Nkodpjylzv Aefx Ah Rsw

Condition: good (used), Year of construction: 1986, CNC Table-type Boring Mill Manufacturer: TOS VARNSDORF Model: WH 10 NC Year: 1986 with Heidenhain TNC 135 control. Spindle diameter: 100 mm Nkedjyk Tltopfx Ah Rjw Spindle taper: SK50 Spindle speeds: Motor 20 kW Spindle travel: 630 mm Travel paths: X 1250 mm, Y 1100 mm, Z 950 mm Table size: 1000 x 1120 mm, load capacity 3000 kg Weight: 12,800 kg Equipped with coolant system, machine documentation available. Machine not under power.

Condition: used, table length 1500 mm table width 1500 mm table load 10 t voltage 380 V Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm Nkjdpfx Ahjyuqf Eo Rsw

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display Nsdpfx Ahjykzhvj Rokw -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: excellent (used), Number of agregats 1 St. Njdeyi Hufepfx Ah Rokw Lock depth max. ca. 130 mm connected load 2,5 kW vertical movement 100 mm

Condition: excellent (used), Grinding diameter: 400 mm Magnetic chuck: Ø 400 mm Grinding wheel: 200 x 80 x 78 mm 2 table speeds: 20/40 rpm Grinding wheel speed: max. 2850 rpm Max. distance between table and grinding wheel: 205 mm Distance between axes of grinding wheel and column: 315 mm Fine feed: 0.01 mm Grinding wheel motor power: 3 kW Magnetic chuck motor power: 0.33 / 0.48 kW Coolant pump motor power: 0.06 kW Dimensions (L x W x H): 1050 x 950 x 1750 mm Weight: 680 kg Equipment / Special features: • Grinding movement via manual pivot arm • Automatic feed • Rotating magnetic chuck, Ø 400 mm • Dressing diamond with table holder Njdpoykkhlofx Ah Rokw • New cup grinding wheel • Coolant system integrated in machine base • Fine and rapid feed via handwheel The machine comes from a training workshop and is in very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Njdpfxoyly R Es Ah Rokw Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Nsdpfx Ajdzp T Njh Rokw Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Nsdpfxox Idxtj Ah Rokw Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Nkjdpfxox A Hbqo Ah Rjw Y axis working area: 2100 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14

Condition: ready for operation (used), Angle head for UNION BFT 90 boring mill Tool holder SK 30 Support bearing for UNION BFT 90 boring mill Nkedjyn Iizopfx Ah Rew

Condition: excellent (used), Drilling capacity -16mm Njdeq Dlznepfx Ah Rskw MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG

Condition: used, Year of construction: 2006, full boring 150 mm bore depth 13000 mm full boring 150 mm workpiece weight 80 t control Siemens type S 7 workpiece dia. 1250 mm 0 2000 mm borehole diameter 450 mm weight of the machine ca. 160 t Headstock adjustment 10,000mm Headstock bed bed width 1600mm, guideway width 360 Center height of headstock 1600 mm Face plate 1750 mm Drive 60 KW Speed ??2.62-200 rpm Bed for drilling unit Bed length 27,000 mm Bed width 1320 mm Guideway width 290 mm height of the bed 670 mm Drill motor 60 KW Nkodpfeyqvcnsx Ah Rsw Drilling unit Sph 920 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team