Used Tape for sale (508)

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: Cgodpfjyxxxvsx Apmew - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: good (used), Ideal 4705 Paper Cutting Guillotine Cgodpezdaxaofx Apmjw This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: used, Year of construction: 2008, Infrared dryer, consisting of: Module 1: - 3 IRM lamps with a power of 3500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 10.5 kW Module 2: - 2 IRM lamps with a power output of 3,500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 7.0 kWTotal connection approx. 19.5 kW/400 V/50 HzExhaust air: - Exhaust air fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160mm ROLLER CONVEYOR - Celfa - Year of manufacture 2008 - Steel rollers with heat protection tape Cjdpfx Apowub Uxsmsgw wrapped around - Roller spacing 160 mm - Feed via hand wheel adjustment - Installation length 2,000 mm - Feed approx. 3 - 7.5 m/min. - Including control cabinet - 400V/50Hz

Condition: used, Year of construction: 2026, Professional EBM 360B table edge banding machine. The machine is designed for edge banding of both straight and curved elements. Ideal edge banding machine for medium and large workshops and carpentry shops. Pneumatic shears for cutting the edge (adhesive tape). Solid, strong construction. This machine feeds, cuts and glues the edge. The tape feeding and cutting sensor automatically takes the cut tapes from the container. Easy to use and conveniently placed control panel. Work comfort and failure-free operation of the machine are ensured. The indisputable advantage is the simple construction and intuitive operation. TECHNICAL PARAMETERS Cgjdpfozhtt Rox Apmow EDGE WIDTH 10-60 (68) mm EDGE THICKNESS 0.3-3 mm MINIMUM WORKING RADIUS 20mm MAX. PERMITTED CUTTING WIDTH 50 mm HEATING POWER 2 kW POWER SOURCE 400V MOTOR 0.18 kW, 0.37 kW, 0.4 kW FEED SPEED 0-14 m/min. AIR PRESSURE 6 BAR DIMENSIONS 1550 x 800 x 1000 WEIGHT 185 kg PLEASE NOTE!!! This machine is a return item, having undergone warranty repairs. It is in working order and complete. No warranty and no returns!!!

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Cgjdpfx Apsu R Syismew Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Year of construction: 2014, condition: used, machine/vehicle number: A14 02 009-0040, Flat spray coating machine for solvent-based and water-based paints, working width: approx. 1,300 mm, driven infeed conveyor; width: approx. 1,300 mm, length: approx. 2,000 mm, folding infeed roller table approx. 900 mm long with a roller spacing of approx. 130 mm, mobile roller holder for protective paper, coating unit with driven conveyor belt and paper tape transport system, double carriage with 2 spray guns each, folding outfeed roller table approx. 900 mm long with a roller spacing of approx. 130 mm, mobile roller holder for protective paper, driven outfeed roller conveyor, width: approx. 1,300 mm, length: approx. 2,000 mm, roller spacing: approx. 150 mm, coating station with 2 Wagner airless pumps and shut-off valves, dry filter extraction system, central control, extraction system with explosion-proof fan and piping components. Cgsdozha Dcspfx Apmew

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Cgodpfxsyuld Aj Apmsw Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Year of construction: 1993, condition: like new (used), Long line: - capacity 350 kg / h - mixer - dispenser, water / flour, horizontal - snail, snail - Press - Vibro dispenser, reconditioned in 2010 - First dryer, reconditioned 2010 - Secound dryer Cgsdpfx Ajh Dxhfopmjw - Possible accumulation of pasta in 8 hours - two dry tapes - two strips for dried pasta - Metal Detector - Comand pult - El. Cabinet - Autoatic packing unit ( 2012 )

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, maximum load weight: 10,999 kg, overall weight: 18,000 kg, tire size: 315/60r22.5, axle configuration: 4x2, wheelbase: 3,690 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: air, Year of construction: 2023, Equipment: ABS, air conditioning, car registration, compressor, differential lock, onboard computer, traction control, IVECO EUROCARGO 180E32P - WHEELBASE 3690 CHASSIS ZCFA81TN102729761 OPTIONAL: Multifunction steering wheel, DAV radio, manual climate control, central locking, armrests seat, Cruice Control, fog lamps, sun visor, hill holder, differential lock. EQUIPMENT SUCCI SCARRABILE Mod. SH14.47 - Boxes up to mt.5.20 Cgsdpsn Am A Refx Apmow Telescopic extension, double cylinders for loading operations, hydraulic locking external type body, 4-way distributor with pneumatic activations, oil tank with filter on the return, cert. "CE". Pushbutton panel electrical in cab 4 F 24v - Crane activation with quick couplers., safety valve and connections electrical, rear stabilizer roller mod. RV14 vertical descent with double cylinders, piston pump inclined axle, PVC single fenders, cycle guard bar, rear and side, clearance lights, 1 toolbox PVC tools, reflective tape, tractor panels, hydraulic/electrical connections, front tank, MCTC tested AND CERT. "CE" Industry 4.0 Adaptation For viewing and road test, contact Valerio Roscini at.

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. Cgsdpfxjzh E Sro Apmjw - Feed unit exchanged.

Condition: used, Year of construction: 2004, Feeder slots in front 40pcs. Back side feeder slots 10pcs and tray solution up to 20 pcs of component trays. Feeders included: o 6 pcs 8mm tape feeders o 18 pcs 12mm tape feeders o 16 pcs 16mm tape feeders o 7 pcs 24mm tape feeders o 3 pcs 32mm tape feeders Codpozf H Snofx Apmegw o 4 pcs 44mm tape feeders o 1 pc 56mm tape feeders

Condition: used, Year of construction: 2006, Available in Q3 2026 NXT base 1: independent, control for second modul Head1: H12S Head2: H12S NXT base 2: dependent, works under modul 1 Head1: H12S Head2: H04 Cgjdpfszf H N Tjx Apmjw NXT base 3: independent Head1: H04 Head2: H01 Feeder slots on each NXT modul 45 pcs. Total slots 270pcs for 8mm - Feeders included: o 156 pcs 8mm tape feeders o 29 pcs 12mm tape feeders o 16 pcs 16mm tape feeders

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Codjzd Ukpjpfx Apmogw Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: new, Year of construction: 2026, neu 2026 060216 prompt, Zwischenverkauf v Türkei 20700 € 397.44 € 1 Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 Cgedpowiqtyofx Apmsw rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: like new (used), Year of construction: 2020, All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo. The Easymount EM-1200DH is a wide-format, double hot roller laminator designed for both laminating and mounting applications. It supports hot and cold lamination, enabling you to laminate prints and graphics, mount prints to boards, and apply vinyls, tapes, and adhesives. Key features include: Csdpfx Asych Utjpmegw * Maximum lamination width of 1200 mm (47 inches) * Lamination speed of up to 3.9 meters per minute * Capability to handle mounting thicknesses up to 25 mm (1 inch) * Variable speed settings for precise control * Reverse mechanism to correct any lamination errors or jams * Heat-assisted rollers for consistent and high-quality lamination results. This machine is suitable for mounting wide images using sheet film as well as continuous mounting with roll film, making it versatile for various print finishing needs. It is designed to be durable and reliable for professional use in wide-format finishing environments.

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection Cgedpjvnv Tqefx Apmsw - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... Cgedpfoyrtzksx Apmjw > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm ...

Condition: not inspected (used), Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing Cjdpfox H Al Nox Apmegw > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm Cedpfjvu Hgbjx Apmegw - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: not inspected (used), Number of sanding units 4 St Codpfjt Tqy Eex Apmsgw sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm External dimensions: Width: 1900 mm Length: 2750 mm Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. Cgodpfx Apszdrbxemjw The stated price applies to one unit. Please see my other listings.

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, total length: 10,520 mm, total width: 2,300 mm, total height: 3,990 mm, suspension: air, tire size: 385/65-22,5, color: green, Year of construction: 2026, Equipment: ABS, - EBS Brand new at PAVIC. Available immediately! PAVIC 3-axle 55m³ tipping trailer with lift axle Technical specifications: Coupling height: 1250 mm Length: approx. 10,522 mm Width: approx. 2,300 mm Height: approx. 2,380 mm Technical axle group load capacity: 27,000 kg Technical kingpin load capacity: 12,000 kg Unladen weight: 8,520 kg CHASSIS: Heavy-duty and extra-durable I-beam main frame; manufactured from high-strength MC700 steel, welded using an automatic robotic welding process. BODY: Capacity: 55 m³ Floor plate: HARDOX450, thickness 5 mm Side walls: HARDOX450, thickness 4 mm Front wall: HARDOX450, thickness 4 mm Rear door: HARDOX450, thickness 4 mm A resonator/vibrator is installed under the structure at the front to help loosen stuck bulk materials when tipped (see pictures). TIPPER BODY: Tipping body with hydraulic tailgate. Suitable for agriculture, forestry, recycling (scrap), and more. HYDRAULIC CYLINDER (LIFT): Heavy-duty hydraulic cylinder (brand HYVA – C), single-circuit AXLES: 3 × 9-ton SAF CD (BI9–22S) axles with disc brakes (SBS2220) SUSPENSION: Air suspension. LIFT AXLE: Automatic lift axle on the 1st axle. TYRES: 6 × 385/65R22.5 (premium brand tires) WHEELS: 6 × steel rims BRAKE SYSTEM: WABCO braking system 2-line brake system according to EU regulations EBS 2S/2M Pneumatic parking brake 1 × yellow air coupling 1 × red air coupling 1 × brake pressure valve TPMS (tire pressure monitoring system) KINGPIN: 1 position, 2” (brand JOST or SAF) LANDING LEGS: Mechanical aluminum landing legs. Each leg is operated via its own locking device (after coupling). ELECTRICAL SYSTEM: Voltage: 24 V 2 × 7-pin and 1 × 15-pin ISO connectors EEC-compliant lighting as standard: SAE tail lights Side marker lights Brake warning lights Rear signal lights Lighting ASPÖCK (EUROPOINT III): 2 combination tail/brake lights (red) 2 combination indicator lights (orange) Csdpfx Apsy N Tngjmjgw 1 license plate light ACCESSORIES: 6 × mudguards 2 × mud flaps 2 × reflective tapes and reflective plates, rear and side 1 × rear underrun protection 2 × wheel chocks with holders 1 × side aluminum protection 1 × toolbox 1 × working platform (painted and bolted) 1 × rollable tarpaulin (including mechanical support bar) PAINTWORK: Before painting, surfaces are smoothed and then cleaned. Then: sandblasting according to SA 2.5, followed by: 2 coats of primer 2 coats of acrylic topcoat RAL colors: Chassis (KTL): black Body: green (similar to RAL 6016 yellow green) For further inquiries, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. General information Year of manufacture: 2026 Axle configuration Tire size: 385/65-22.5 Brakes: disc brakes Suspension: air suspension...

Condition: used, Year of construction: 2008, machine/vehicle number: MBI20, Used Packaging Monoblock TMG COMBI 3000 BPHTechnical Specifications & Performance DataThis Casepacking Monoblock is engineered for secondary packaging of bottles with integrated erecting, packing, partition inserting, and sealing in a single compact frame. Manufactured by TMG, model COMBI 15 N-DA, this second hand unit is optimized for beverage production and industrial packaging lines that require reliable, continuous operation.Manufacturer: TMGModel: COMBI 15 N-DAYear: 2008Category: Casepacking MonoblockProduction speed: up to 3000 bph (bottles per hour)Carton formats: 6-bottle cartons; 12-bottle cartonsContainer compatibility: Glass bottlesBottle format handled: 1.5LIntegrated sections: carton forming, high-capacity magazine, case packing, automatic partition inserter, top-and-bottom sealingClosure system: adhesive tape (top and bottom)Control system: PLC-managed operationsAdvanced Automation & Control SystemsThe monoblock features PLC-based controls for synchronized operation of each module, ensuring stable throughput and high repeatability across shifts. Automated sequencing coordinates carton erection, bottle grouping and loading, partition insertion, and closure, minimizing manual intervention. The control logic supports quick stops and restarts, fault diagnostics, and consistent performance for demanding production schedules typical of a used bottling line.Centralized PLC control for all stationsAutomated timing and interlocks between modulesConsistent, repeatable handling for glass packagingDesigned for efficient format adjustments between 6 and 12 bottlesProduction Line Integration CapabilitiesThis monoblock integrates seamlessly into beverage production environments, upstream of palletizing. It can operate inline with conveyors from filling, labeling, and inspection equipment or as a standalone packaging center with infeed and outfeed conveyors. The integrated high-capacity magazine ensures continuous supply of cartons, while automated case closing with tape simplifies downstream logistics.Inline or standalone operationHigh-capacity carton magazine for extended autonomySuitable for wine bottling and other glass-based productsHandles 1.5L bottles; adaptable to 6 or 12 bottle case patternsMachine Condition & Maintenance HistoryThis second hand Casepacking Monoblock is presented in used condition and suitable for integration into an operational packaging line. Built in 2008, it aligns with industrial packaging standards of its generation and is configured for glass bottle handling with tape sealing. Its PLC-managed design supports reliable operation and straightforward maintenance routines typical of robust TMG engineering.Operational Performance & VersatilityDesigned to protect premium products such as sparkling wine, the monoblock combines precise bottle loading with automatic partition insertion for... Cgjdpfx Ajzb Ikrjpmjw

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Cedjzdfbyspfx Apmsgw Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Cjdpfxocr Ru Do Apmogw Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm