Used Tape for sale (520)

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 70 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 155/155/H71 mm -Weight: 3.9 kg Bsdjdfgllepfx Andodi

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 90 mm shaft Bsdpfsdfglnjx Andsdi -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 175/175/H80 mm -Weight: 6 kg

Year of construction: 2022, condition: new, machine/vehicle number: 201811209, Rising conveyor belt / angle conveyor belt, articulated conveyor belt incl. magnetic separator overband magnetic separator magnetic tape Rising conveyor belt + overbelt magnetic separator Complete solution for wood chip producers Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 3,000mm Rising range: 2,000mm Angle in the bend area: 45° Total conveyor length: 4,400mm Discharge height: 1,600mm Height of horizontal: 200mm Conveyor belt width 500mm Drive roller + deflection roller S235 steel welded and machined Aluminum deflection roller stored in the kink and crowned overturned PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 1.1KW, GEMOTEG speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 40x35mm Bdodpedrdyyofx Andji T40 studs, pitch 400mm 2-layer particularly laterally stable Usable width 190mm, results as follows: Transverse arrangement -70+35-190+35-70mm

Condition: used, Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand Bedpfx Anegmuz Uodsdi -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Condition: new, Year of construction: 2026, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm Bdjdshupkmjpfx Andei ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Year of construction: 2026, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available Bedpfxsidlpie Andjdi • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2026, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm Bdodpsidmp Tofx Andsi • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm Bdjdpfx Anezvt Tyodoi * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: new, Year of construction: 2026, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 350 mm, air pressure: 6 bar, section length (min.): 50 mm, HECHT Double Mitre Saw Exenso DS350E - 3000 mm for wood, glass strips, mullions, profile strips, aluminum strips, etc. Item number 942.5103, 1 piece, HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inward) to 135° (outward) - Right head is adjustable - Saw blade mounting Ø 350 mm - Incl. 1 piece of center support. - Clamping of the units is pneumatic. - Positioning control Exenso DS3 with touch panel, 15" display in a dust-protected monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of cutting data manually - Processing of data from a cutting list (data set according to specifications) - Processing of measuring tape data (radio measuring gauge GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item number 942.5203, 1 x DS feed device, hydropneumatic Item number 723.0121, 2 x DS saw blade for wood Bevel/bevel/flat tooth - positive - Item number 942.5236, 2 x DS workpiece clamping, combined (4 x horizontal, 4 x vertical clamping elements) Combined workpiece clamping consisting of: Swivel clamp, pneumatic - for clamping the material from above. Bedpfxezr Uu Rj Andsdi (Free access to the work table) Horizontal clamp, pneumatic - torsion-resistant clamping cylinder with pressure piece. The clamps can be selected individually via the saw's control system. The clamping sequence can also be set via the control system. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item number 942.5241, 1 set DS350 table support, grooved (standard groove), Special grooving according to customer drawing on request! - Documentation: 1 x German or in the respective national language - Item number 945.2007, Packaging DS350 (transport frame) - Item number 944.1023, GMF measuring gauge, 3000 mm complete set (1500 mm plus extension 1500 mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glass strips. Function For use on doors and large window sashes, the GMF measuring gauge can be extended mechanically and safely up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection and calculation.

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Bodpfezufl Sjx Andodi Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. Bodpfx Anezqiiajdodi - Load measuring device for determining the axle loads including load chart.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. Bodpfsztq Ezox Andodi The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm.

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), fuel type: electric, Year of construction: 2026, YM 1240 Mobile Screening and Washing Plant General Makina, Washing Screening plant is designed for easiness and with a single system to perform all operations 35 years of experience result. It makes alot of works itself on a single mechanism in 30 minutes. Our mobile screening and washing plants are our most preferred machines. Optional Features: Crawler walks Equipment with Remote Control Imported Reed Wire Screens and Stretching Tool Adjustable Speed Measuring Tape Bodpewhmx Aofx Andjdi Diesel Generator Set General Makina with ISO 9001 and CE quality certificates, Washing and Screening Plant is manufacturing to the domestic and overseas.

Condition: used, Year of construction: 1971, roll diameter 300 mm throat 450 mm table height 480 mm Bodpfowhqtdex Andedi saw band length 3350 mm width of saw-band 10 mm total power requirement 2,2 kW weight of the machine ca. 520 Kg dimensions of the machine ca. 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00

Condition: new, 12 boxes (24 rolls) of strapping tape, Tewe, 12x0.63mm, length 3000m, core 200, black – used -: Price for complete collection from location: only €1,200 (net)!! Manufacturer: Tewe Bjdsv T Rwhepfx Andjdi Type: 12063, 7640 / Q 2242402 Year of manufacture: 2x 3,000m black Diameter: 200mm Condition: New Available: Immediately Location: Braunschweig

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Bjdjp N D Ngopfx Andedi Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger Bdedjd Naw Djpfx Andei -Stuffing box made of: stainless steel -Stuffing box for: Ø 38 mm shaft -for: gland tape -Price: per piece -Number: 8 pieces -Dimension: Ø 101 x 45 mm -Weight: 1 kg

Condition: used, Year of construction: 2008, Infrared dryer, consisting of: Module 1: - 3 IRM lamps with a power of 3500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 10.5 kW Module 2: - 2 IRM lamps with a power output of 3,500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 7.0 kWTotal connection approx. 19.5 kW/400 V/50 HzExhaust air: - Exhaust air fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160mm ROLLER CONVEYOR - Celfa - Year of manufacture 2008 Bdsdpfxowub Uxe Andei - Steel rollers with heat protection tape wrapped around - Roller spacing 160 mm - Feed via hand wheel adjustment - Installation length 2,000 mm - Feed approx. 3 - 7.5 m/min. - Including control cabinet - 400V/50Hz

Condition: new, Year of construction: 2025, Fully automatic high-speed cardboard box erector for an efficient, fast and cost-effective packaging process. The cartons are automatically removed, built up and taped at the bottom (in only one direction). The cartons lying on the side are then conveyed out for collection. - Specifications: PLC controlled, operation via touch monitor, boxes in mm: L(130-280)xW(80-200)xH(80-200); max. speed of the machine in neutral: 20 cycles/minute; carton hopper capacity: H = 600mm; power: 110/220V, 1kW; compressed air: 5-8bar, 0.3m³/min; tape width in mm: 36/48; machine dimensions and weight: L1680xW1210xH1260 mm, 700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bdodsv Nkvvopfx Andoi

Year of construction: 2014, condition: used, functionality: fully functional, Type of machine REWER Manufacturing year 2014 Weight 2000 kg Power supply 14 KW Voltage 3x400 V Air pressure 7 bar Rewound material foil: OPP, PET, PVC, OPS, LDPE: 40-50 mkm. cardboard Width of material 500 mm Max. winding diameter 800 mm 1 shaft core 76 Max unwinder diameter 800 mm 1 shaft core 76 Winding speed 0-400 m/min Max weight 400 kg Wind direction right to left or left to right (both side) Lay-on shaft 2 psc. Rewinder and unwinder separate Web guide system with ultrasonic sensor 1 psc. Waste winder with splice table 1 psc. Bodpfx Ajkw Ufzsndjdi Slitting module rotary knife Control panel touch screen Adapter diameter 152 mm. 2 psc. Stroboscope with tape control sensor

Condition: used, machine/vehicle number: WFDFLT21301006798, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 05/2017, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth-wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chocks with holder, steel underrun protection, half-shell fenders, removable upper parts Drawbar with tested 50 mm drawbar eye, lower coupling for drawbar BPW disc brake axles, air suspension with raise and lower valve, mechanical dolly steering system (required in Germany to comply with the BO-Kreis regulations) 2-line compressed air brake system, spring-loaded parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, Duomatik coupling head for the semi-trailer, including connecting coil, EBS, electronic brake system with EBS plug at the front, with connecting cable EBS connecting cable to the semi-trailer, with CAN router, axle load detection for the truck via EBS, without truck installation. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! Bedpji Rivtsfx Andsdi 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front, with connecting cable to the truck, 1 x 15-pole socket, with connecting coil to the semi-trailer, cable for reversing camera system with socket with DEKRA approval, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70 Saddle height approx.: 960 mm

Condition: like new (used), Soco Case / Carton Sealer & Packing Station (Like New) Model T10 With infeed and outfeed gravity conveyors Top and bottom tape heads Bdedpfx Anerza Ncedei Top box flap closer facility Adjustable box side guides Box holder on infeed conveyor for packing station use All mobile on castors In excellent working condition, Like new

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 2730 x 27 x 0x9speed of the tape: 35/70cutting area - round: 230cutting area - square: 230cutting area rectangle: 320 x 130messurements (LxWxH): 1350 x 770 x 1300working height: 760coolant pumpmotor: 0.12weight approx.: 525cutting area 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160Cutting area 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100Cutting area -45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100motor: 1.3 UZMA 230DG  Hydraulic Bow  Double Mitre  Head  Heavy duty Structural steel machine. Standard Accessories: - M42 Bi-metal saw blade - Variable speed - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Manual  vice - Hydraulic  Bow  - Blade tension Device - Pendant control Bedporzx Dlofx Andsdi - Mitre Head 2 directions  - Heavy Duty Gear Box

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 3160 x 27 x 1,1speed of the tape: 20-100cutting area - round: 270cutting area - square: 270cutting area rectangle: 350 x 220messurements (LxWxH): 2230 x 770 x 1450working height: 910weight approx.: 525Cutting area 60°: rund 150 mm, quadrat 100 mm, rechteck 150 x 100 mmcutting area 45°: rund 240 mm, quadrat 170 mm, rechteck 270 x 210 mmCutting area -45°: rund 210 mm, quadrat 180 mm, rechteck 270 x 210 mmmotor: 1.5coolant pumpmotor: 0,12 Band saw KK Kletzer 270DG Gravity feed Double Mitre  Head  Heavy duty Structural steel machine   Standard Accessories:  - M42 Bi-metal saw blade  - *Variable speed - Inverter control device  - Coolant system  - Auto. saw blade breakage power off system - Manual  vice - Gravity Bow  Bow - Blade tension Device - Pendant control Bjdpfxjrzx Dpe Andedi - Mitre Head 2 directions   - Heavy Duty Gear Box

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 3160 x 27 x 1,1speed of the tape: 20-100cutting area - round: 270cutting area - square: 270cutting area rectangle: 350 x 220messurements (LxWxH): 2230 x 770 x 1450working height: 910coolant pumpmotor: 0.12weight approx.: 525Cutting area 60°: rund 150 mm, quadrat 100 mm, rechteck 150 x 100 mmcutting area 45°: rund 240 mm, quadrat 170 mm, rechteck 270 x 210 mmCutting area -45°: rund 210 mm, quadrat 180 mm, rechteck 270 x 210 mmmotor: 1.5 Bandsäge KK Kletzer 270DGH Semi automatic Bandsaw Double Mitre  Head  Heavy duty Structural steel machine   Bjdpfxjrzx Dtj Andodi Standard Accessories: - M42 Bi-metal saw blade - Variable speed  - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Hydraulic vice - Hydraulic Bow - Blade tension Device - Pendant control - Mitre Head 2 directions   - Heavy Duty Gear Box