Used Teach In Lathe for sale (5,844)

Condition: ready for operation (used), operating hours: 33,600 h, functionality: fully functional, spindle bore: 83 mm, center width: 2,000 mm, turning diameter over bed slide: 570 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens 810D, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swing diameter over bed: 570 mm Swing diameter over carriage: 340 mm Centre distance: 2,000 mm Speed range, stage 1: 1–625 rpm Speed range, stage 2: 4–2,500 rpm Spindle bore: 83 mm Spindle nose: Size 8 DIN 55027 Feed range longitudinal/cross: 0–20 mm/rev Metric threads: 0.1–400 mm Inch threads: 1/4–56 TPI Tailstock quill diameter: 80 mm Taper: MK 5 MACHINE DETAILS Control: Siemens 810D Electrical data Main drive: 20/17 kW Connected load: 30 kW Dimensions (L x W x H): 4,000 x 2,300 x 1,800 mm Operating hours: 33,600 hours EQUIPMENT Rapid traverse longitudinal/cross 8-position Sauter tool turret incl. holders Mayfran chip conveyor with coolant system Laedpfx Aajxqpgfobjh Movable chip guard cover 3-jaw chuck Schunk Rota S 250 Manuals Note: The viewing windows and feed selection levers have been replaced. In addition, an oil change has been performed and the oil filter replaced.

Condition: excellent (used), Year of modernization: 1991 Table diameter: 3750 mm Manufacturer: CKD Skoda Max. workpiece diameter: 4200 mm Workpiece height: 2500 mm Vertical stroke: 1400 mm Lasdpfx Aajwza Svobsh Table diameter: 3750 mm Table load capacity: 40,000 kg Excellent condition Side support Weight approx. 100,000 kg

Condition: like new (used), Year of construction: 2022, operating hours: 12 h, functionality: fully functional, machine/vehicle number: A320A/3798, Machine is purposed for orthopedic implant. Equipped with thread whirling tooling, enable very fast orthopedic / compression locking implant screw manufacturing. Condition is very prime, bought but never used for real production (only for research and development purposes), with around 12 hour TOTAL run-time only. Laedpjw Il Nlofx Aabsh

Condition: used, Year of construction: 2015, TAKISAWA TS4000YS year 2015 CNC control FANUC 32i-MODEL B Max. turning diameter 315 [mm] Max. swing over bed 600 [mm] Max. Turning length 735 [mm] Stroke X axis 267 [mm] Stroke Z axis 840 [mm] Stroke Y axis -50 [mm] / +70 [mm] Stroke A axis 780 [mm] Rapid traverse rate X axis 30000 [mm/min] Rapid traverse rate Z axis 30000 [mm/min] Rapid traverse rate Y axis 10000 [mm/min] Rapid traverse rate A axis 30000 [mm/min] Spindle nose A2-8" Lajdpfowq Sf Tsx Aaboh Max. bar diameter 82 [mm] Spindle throughbore 94 [mm] Max. spindle speed 4200 [rpm] Spindle power 22 [kW] Counter spindle nose F140 Counter spindle throughbore 53 [mm] Max. counter spindle speed 6000 [rpm] Counter spindle power 11 [kW] Max. tool holder cross-section 25 [mm] Number of tool stations 15 Number of tool stations driven 15 Max. speed driven tools 6000 [rpm] Lubrication tank capacity 370 [l] Total power required 37 [kVA] Supply voltage 400 [V] Chip conveyor with machine 5 live tool holders Weight 6700 [Kg]

Condition: excellent (used), Single-sided oscillating drilling machine PADE MSO Maximum hole width: 100 mm Maximum hole depth: 55 mm Maximum tool diameter: 13 mm Tool speed: 10,000 RPM Main motor: 2.2 kW Oscillation motor: 1.1 kW Worktable tiltable at angle +/-15° Pneumatic material clamp Lasdjxpdr Topfx Aabjh Pneumatic worktable feed CE Certificate

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, First installation in 2023 Controller OPS-P300LA control system Swing diameter: 450 mm Center distance: 500 mm Max. turning diameter: 230 mm X-axis: 165 mm Z-axis: 470 mm Number of turrets: 1 Turret design: V12 Tool positions: 12 Driven tools: none Max. cutter cross-section: 25 x 25 mm Max. drill diameter: 32 mm Speed ​​range: 45–5000 rpm Spindle bore diameter: 62 mm Tailstock: yes Parts catcher: yes Prepared for bar feeder magazine: yes Lodpfx Aexpfn Aeaboah The machine is barely used and available for immediate purchase. Live in Hungary.

Condition: used, Year of construction: 1975, - 3-jaw lathe chuck Ø 400 mm - 4-jaw faceplate Ø 600 mm - Grinding attachment Ø 200 mm - Multifix - Change gears - Operating instructions & documentation - Year of manufacture 1975 Lsdpewdxmqofx Aabeah Working area: - Center height: 300 mm - Swing over bed: 620 mm - Swing in the gap: 800 mm - Swing over the cross slide: 360 mm - Length of gap: 407 mm - Distance between centers: 1000 mm - Max. workpiece weight between centers (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Internal taper: Metric 90 - Center punch: MK5 Tailstock: - Quill stroke: 180 mm - Quill diameter: 85 mm - Quill inner taper: MK5 Clamping fixtures: - Faceplate diameter: 600 mm - Max. chuck diameter: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feed rates: - Lengthwise feed: 0.086 - 4.866 mm/rev (66) - Cross feed: 0.040 - 2.258 mm/rev (66) - Cross slide travel: 375 mm - Top support travel: 210 mm Thread pitches: - Metric threads: 0.5 - 28 mm (66) - Inch threads: 1 - 56 dpi (66) - Modular threads: 0.25 - 14 mm (66) - Diametrical pitch thread: 2 - 112 dpi (66) Installation: - Motor power: 15 kW - Operating voltage: 400 V - Dimensions W x H x D: approx. 2950 x 1400 x 1400 mm - Weight: approx. 3100 kg

Condition: good (used), Faceplate: 3600 mm Turning diameter: 4000 mm Max. height under crossbeam: 2950 mm Vertical ram travel: 1750 mm Horizontal ram travel: 2255 mm Scale Ledpfxswf Iwus Aabeah Chip conveyor

Condition: good (used), Year of construction: 2010, Big-Bore Toolroom Lathe Haas TL-3B year of manufacture 2010 Ledpexgpx Hsfx Aabeah Main technical data: Swing Over Front Apron: 30″ (762 mm) Swing Over Cross Slide: 18.5″ (470 mm) Distance Between Centers: 60″ (1524 mm) Max Cutting Diameter: 30″ (762 mm) Max Cutting Length: 60″ (1524 mm) Spindle Speed: 650 RPM Spindle Motor: 40 HP Spindle Bore: 8.5″ (216 mm) Chuck Size: 25″ (635 mm) Rear Chuck Size: 25″ (635 mm) X-Axis Travel: 16″ (406 mm) Z-Axis Travel: 60″ (1524 mm) Approx Operating Dimensions (w x d x h): 147″ x 97″ x 79″ Approx Machine Weight: 4400kg / 9624lb Machine under power. For more information please contact us.

Condition: used, Year of construction: 2016, functionality: fully functional, turning length: 513 mm, turning diameter: 300 mm, feed length Z-axis: 580 mm, CNC lathe Doosan Puma GT2100M Year of manufacture: 2016 Control: Fanuc i Series with Manual Guide C-axis with driven tools Turning length: 513mm Turning diameter: 300mm Axis travels: X – 230mm Z – 580mm Chuck: 210mm Samchully Spindle bore: 65mm Turret for 12 tools BMT 55 Measuring probe Tailstock Laodpexpyc Usfx Aabjh Parts catcher Included with the machine: - LNS chip conveyor - Tray with pump - 7 standard tool holders - 2 driven tool holders 1/1 - Machine documentation

Condition: excellent (used), Control: Siemens Sinumerik Lasdpoxnbbpefx Aabeh Number of axes: 5 Tool magazine (ATC): 80 tools Cooling: high-pressure coolant Chip conveyor: yes Chiller: yes Hydraulic unit: Hydropower Year of manufacture: 2013

Condition: used, Year of construction: 2016, Operating hours: 29,800 h Control: Siemens 840D Technical data: Centre distance: 1,000 mm Swing over bed: 430 mm Swing over cross slide: 220 mm Bed width: 350 mm Turning tool cross-section (height x width): 20 x 20 mm Spindle nose in accordance with DIN 55027: Size 6 Spindle diameter at front bearing: 110 mm Spindle bore: 80 mm Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1 - 3,600 rpm Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 7 m/min Quill diameter: 70 mm Quill stroke: 150 mm Laedpoxqp Ezsfx Aabeh Quill taper (internal): MK 5 Dimensions (LxWxH), approx.: 2,800 x 2,100 x 1,900 mm Weight, approx.: 3,300 kg

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - max. turning length 1200mm - max. turning diameter 210mm - max. turning diameter with standard steady rest 90mm - max. size of square material for turning with automatic feeding 100mm - 3 hydraulic copiers - additional 3 knives on hydraulic pistons (2 pieces installed) Laedpekqui Rsfx Aabeh - 4 types of spindle speeds - automatic or manual machine operation - 9kW headstock spindle motor - 3kW hydraulic pump motor - diameter of the exhaust port 90mm - dimensions for transport length/width/height 3700x2100x2000mm - weight approx. 3000kg ADVANTAGES - Italian production - automatic hydraulic copier - original DTR documentation - unpainted - used lathe, condition very good Net price: PLN 63,900 Net price: EUR 15,040 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Laedpsvk T S Asfx Aabjh Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Condition: refurbished (used), Year of construction: 1980, turning height: 4,800 mm, Completely retrofitted Single Column Vertical Turning Lathe Blansko SKSJ 1A, equipped with a single vertical head suitable for both turning and milling operations. Technical specifications: - Face plate diameter: 6,300 mm - Maximum achievable outer diameter (with column at max. extension): 11,200 mm - Maximum workpiece height: 4,800 mm - Maximum turning diameter (column positioned near face plate): 8,000 mm - Maximum turning diameter (column at maximum extension, for internal turning): 16,000 mm - Infinitely variable face plate speed: 0.5 to 20 rpm - Maximum permissible workpiece weight on face plate: 125 tons The machine underwent a comprehensive retrofit in 2024-2025 and is equipped with the following brand-new components: - New electrical cabinet with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 CNC, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers (ratio 1:5) - New ballscrews on 2 axes (vertical head and cross rail) - New Heidenhain absolute scales on 2 axes - Hydraulic and lubrication systems fitted with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New DROPSA (Italy) or equivalent central lubrication system Lodpfxjw Hfm Ne Aabsah - Geometric accuracy according to ISO standards – as per new-machine specifications For further information, please contact us.

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Laedpfxexn Svdo Aabsh Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Lodpfx Aaow Ebngjbsah Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10607 Manufacturer: GEMINIS Type: GT5 - G2 1200 x 1000 Year of construction: 2013 Type of control: CNC Control: Siemens 840 D - SL Storage location: Halberstadt Country of origin: Spanien Machine-No.: 220XXXX Turning Diameter Over Bed: 1200 mm Centre Height: 615 mm Centre Distance: 1000 mm Travel -X Axis: 1260 mm Lodpfx Asxqd E Neaboah Traverse path of the crossbar: 603 mm Rapid Traverse: 8000 mm / min cross-section: Ø 850 mm Machine length: 5830 mm Machine width: 3350 mm Machine Height: 2700 mm Weight Of The Machine Ca.: 14 t

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 7002, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 520 mm, turning length: 2,800 mm, Used STANKO 1A64 x 2800 lathe, in very good technical condition, including NEWALL Digital Readout and extensive equipment and accessories. Technical specifications: Lsdpfx Aov Iypveabeah Turning diameter over bed: 800 mm Turning diameter over carriage: 520 mm Turning length: 2800 mm Equipment: 1 x Steady rest 1 x 3-jaw chuck, diameter 500 mm 1 x 4-jaw chuck, diameter 500 mm 1 x NEWALL Digital Readout

Condition: used, Year of construction: 2021, DOOSAN LYNX 2100 LSYA Year of manufacture: 2021 Control: Siemens SINUMERIK 828D touch Turning diameter: 300 mm, Turning length: 510 mm, Axis travels: Z - 560 mm X - 205 mm Y - 105 mm Bar capacity: 51 mm, Hydraulic chuck: 6 inch 4500 rpm, 24-position turret, Spindle motor: 12.5 kW, Milling: 6000 rpm, 2x C-axis Sub spindle -part conveyor, Laedpfxoxny Axs Aabeh -part catcher, tool probe, chip conveyor.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn L44 CNC Premium CNC lathe direct from the manufacturer. L44 CNC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and long service life. Dimensions and weights Width/depth max. 2300 mm Length approx. 2530 mm Width/depth approx. 1595 mm Height approx. 1795 mm Weight approx. 2600 kg Working areas Lathe chuck diameter 150 mm Lathe chuck Hydraulic control of the clamping movement Center height 223 mm Center width 850 mm Swing diameter over machine bed 446 mm Swing diameter in the bed bridge 520 mm Swing diameter over cross slide 240 mm Bed width 300 mm Motor torque X-axis 6 Nm Z-axis 8.5 Nm Speed range Number of speed ranges 1 Speed range 10 - 3000 min¯¹ Electrical data Drive motor power 7 kW Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 23 kVA Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Hydraulic system Motor output 0.75 kW Tank capacity 50 l Coolant system Coolant pump output 270 W Tank capacity 90 l Machine data Chuck opening diameter 40 mm Motor(s) Torque drive motor 33 Nm Tailstock Mounting MK 4 Quill stroke 165 mm Quill diameter 52 mm Spindle Spindle holder DIN ISO 702-1 No. 5 Spindle bore/bar passage diameter 52 mm Control system Type Sinumerik 828D PPU 240 System software SW 24 CNC memory 3 MB Look Ahead 50 Block change time 3 ms Number of tools 128 Travel distance X-axis 250 mm Z-axis 760 mm Vertical spindle Power drive motor continuous operation S1 7 kW Power drive motor S6-30 % operation 16 kW Drive motor torque 33 Nm Drive motor S6-30 % operation 80 Nm Feed rate Speed X-axis 15000 mm/min Z-axis 15000 mm/min Feed force Feed force X-axis 7.5 kN Feed force Z-axis 5.3 kN Tool changer Hydraulic type; VDI 30 Number of tool positions 8 pcs Mounting height, width square max. 20 x 20 mm Boring bar mounting diameter max. 25 mm SIEMENS SAFETY INTEGRATED Equipment Main spindle - Solid design Machine bed - Heavily ribbed - High rigidity and durability Guideways - Stable flat bed guide Recirculating ball screw - For high rapid traverse speeds in all axes - Less wear and tear - For high positioning and repeat accuracy Cast body - Hardened HRC48-52 and heat-treated Machine feet - Six pieces - Optimum alignment of the machine Heat exchanger - Closed switch cabinet with intelligent cooling management - Optimum temperature even at high outside temperatures Tool changing system - Eight tool stations - Hydraulic VDI30 tool changer - Pick-up height max. 20 mm Hydraulic unit - Motor power 750 W - Tank capacity 50 liters - Clamping pressure / operating pressure 2,500 - 2,942 kPa Three-jaw chuck Ljdsw Ea Tuopfx Aabeah - Hydraulic three-jaw lathe chuck Ø 150 mm - Hydraulic loosening and clamping via foot switch - Simple clamping of workpieces - Hard and soft block jaws Central lubrication system - Automatic supply at intervals - Reduces wear on bearings, ledges and ball screws - With float switch. An acoustic signal sounds if the oil level is too low

Condition: good (used), Year of construction: 2024, Ref. -No.: 10605 Manufacturer: VDF WOHLENBERG Type: E 1000 Year of construction: 2024 Type of control: CNC Control: Sinumerik Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX Turning Diameter Over Bed: 1500 mm Turning Diameter Over Slide Rest: 1150 mm Centre Height: 750 mm Centre Distance: 9000 mm Faceplate Diameter: 1000 mm Spindle Bore: 80 mm Spindle Speed Min.: 1,4 - 280 RPM Laedpfx Aaoxqd E Aebsh Turning diameter over cross slide: 800 mm Swing diameter over cross slide: 800 mm Space requirement: 13000 x 2650 x 2250 mm Power Capacity: 320 kW Weight Of The Machine Ca.: 8 t Max. turning diameter (in the offset): 2000 mm Size of the inner cone: metr. Kegel 1:20 quill cone: 80 O

Condition: used, Year of construction: 2015, CNC lathe Doosan Puma GT2100, year 2015/11 Fanuc i Series with Manual Guide Axis travels: -X 230 mm Ledpfx Aaoxl Atueboah -Z 580 mm 12-position turret Main spindle 4,500 rpm Spindle bore 65 mm Max turning diameter 390 mm Measuring probe Tailstock 210 mm chuck Machine documentation Weight 3,500 kg

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Laodpfxoxqd Drs Aabsh Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Ljdpfxexqd Azo Aabsah Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.