Used Temperature Control System for sale (66,321)

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE type STW 180/1-36-100-S Serial No.: 130569 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal filling volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 volts, 50 Hz, with 63 amp CEE plug - Temperature control Blodpfx Aho Agw Erjdep - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Bodsy Su Efepfx Ahdslp

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 Bledpfx As Aaaqqjhdep 400V, 50Hz, 9.8kW, 15A Weight: 130 kg

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Bledpfozdqkrox Ahdsp Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 1999, machine/vehicle number: 14490/99, Temperature control unit by Robamat, used and untested. Designed for mold temperature control, injection molding, and industrial process engineering applications. The unit features a dual-circuit system with a Thermocast 4212 control system and two µP103 Mega control units. Operating medium: oil*. Maximum flow temperature: 320 °C. Heating capacity: 2x 34 kW*. Pump output: 75 l/min at 5.0 bar*. Year of manufacture: 1999. Total weight: 350 kg. Blodjy Surfspfx Ahdep

Year of construction: 2020, condition: like new (used), functionality: fully functional, The Regloplas P140XS temperature control unit is for sale. Medium: Water Bodpjzvur Defx Ahdjlp Heating capacity: 3 kW Cooling capacity: 38 kW Maximum flow rate: 11 l/min Weight: 25 kg Dimensions (W/H/D): 143/420/520 mm

Condition: used, BÖLLHOFF Type: 6039402 Control unit for RIVSET blind riveting system Operating voltage: 400V 50 Hz Rated current: 13A Bodpfx Ahszgaahjdjlp Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Closed-loop process temperature control for industrial applications in plastics processing, in particular for temperature control of injection molds and other process tools. Manufacturer's serial number: 102010690001 Year of manufacture: 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Maximum operating overpressure: 6 bar Blodpfx Ahj Agw Ekedsp Pump capacity: 60 l/min. Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Pump motor power: 1 kW Continuous sound pressure level

Condition: good (used), Electrical control cabinet with Siemens S 5 controller. Complete with contactors, fuses, etc. Bedj Agnncspfx Ahdelp

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm Bljdpfx Aez Sy I Iohdep - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: ready for operation (used), Year of construction: 2017, Wittmann MTC Primus-C90 F27 Temperature Control Unit, Single-Circuit Only one unit is available. Year of manufacture: 2017 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW Bsdpjyw Rfxefx Ahdslp You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 113201690006, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, This device is a component of an entire production line, which has not been in use since 2022. The entire line consists of 6 such devices, which are grouped in pairs. Each pair of devices has its own control cabinet/switchboard. The entire system is controlled from a main switchboard. The entire system, or individual components, will be sold. Blodpfx Ajzt Nprohdjp

Year of construction: 1998, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW dimensions 0,90x0,25x0,70 m weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 1998 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type Bsdpozhn Tlsfx Ahdslp - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Condition: good (used), functionality: fully functional, machine/vehicle number: 310579, overall weight: 80 kg, heating capacity: 10.2 kW (13.87 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 16 A, Type: P160/9/SG51/1K/RT45 Power: 10.2 kW Max. operating temperature: 160 °C Medium: water Bsdpfx Ahez Dxg Sjdslp Temperature control unit

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Stock: 3 units Blodpjzab S Hefx Ahdop

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) Bedpjzd Sdmefx Ahdolp (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Bledpfev Ivnzex Ahdop Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Bljdpfov Ivn Uox Ahdsp Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, LDS Dactron Bljdpfxey Ugrpo Ahdep LDS Dactron COMET USB Shaker Control System Type: COM 200 Vibration Controller / Shaker Controller For sale is a used LDS Dactron COMET USB Shaker Control System, model COM 200. This system is suitable for electrodynamic shaker systems, vibration testing, and shock testing, including random, sine, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Specifications 2-channel shaker control system USB connection Power supply: 100 - 240 V Frequency: 47 - 63 Hz Current consumption: 0.5 A Suitable for random, swept-sine, and shock tests on electrodynamic vibration testing systems. Software / Functions Installed software (as displayed): Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module (as displayed in the software): Value Swept Sine Activated option (as displayed in the software): Real Time Data Exchange Calibration Calibration data (according to label): Calibration date: 2010-09-21 Due date: 2011-09-21 Note: The calibration has expired. Recalibration can be arranged by the buyer if required. Connections USB interface BNC connectors Power connector Other connections as shown in the images Scope of supply LDS Dactron COMET USB COM 200 Controller Power cable / connection cable as shown in the images Accessories as shown in the images Condition Used Optical condition as shown in the images Normal signs of storage and use Important note: All information has been provided to the best of our knowledge based on the images, nameplates, and manufacturer information. Shipping is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Year of construction: 2003, Temperature Control Unit Manufacturer: GWK Model: teco cw 60 Year of manufacture: 2003–2008 Technical data: - Circulating medium: 25 °C - Cooling capacity: 10 kW - Electrical connected load: 5.45 kW - Operating/control voltage: 400–415/24 V / 50 Hz - Rated current/max. back-up fuse: 15.2 / 25 A In our assessment, the temperature control units are in good used condition. Bodpfxezbc Hbj Ahdolp The offer includes 2 units. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Bedpfx Aozdy Iashdelp Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1999, Selogica control system All cards Removed from a functioning Arburg 420 C 1000-350/150 machine Individual cards can also be sold!!! PRICE REDUCTION FROM 1950 TO 1500 EUR!!! Bsdew Tkdfspfx Ahdslp

Condition: used, functionality: fully functional, Vendo 4 unidades de aquecimento HB- therm serie 5. Bjdpfx Ahj Agxhxsdelp Excelente para quem tem moldes de canais quentes . Data dos aparelhos visíveis nas máquinas.

Condition: used, This Siemens brand control panel is for sale. Serial number: 1P 6SL3000-0DE25-5AA1. Further information can be found in the pictures. The device is in good, used condition. Tested and ready for immediate use. Bjdpfxorum T Dj Ahdolp For further questions please contact us. Shipping can be organized at any time on request.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: Blodozgckcjpfx Ahdop The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.