Used Temperature Control System for sale (58,582)

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: West 6600 -Article No.: 0906 Z220000 S -Number: 6 controllers available -Price per piece Nsdpfetuycvex Aqvowg -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm -Weight: 0.8 kg Njdpfjudqbijx Aqvewg

Condition: good (used), Year of construction: 1999, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 Njdpfxeqmt Aco Aqvjwg -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller 0 to 250 °C -Type: unfortunately without type designation .: 624603-10114-JR10A -Dimension: 130/100/H95 mm Nwsdpfsm Ui Ihjx Aqvog -Weight: 0.5 kg

Condition: used, Year of construction: 1992, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones Nodpeudqb Ajfx Aqvjwg -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Condition: good (used), Year of construction: 2007, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 -Heating output: 9 kW Nwedsiyzn Djpfx Aqvjg -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc.

Condition: good (used), Year of construction: 1998, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit Njdpfx Aqeiyzn Isvswg -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: grado 906 -Article No.: 0906 Z2210 S Nedpfxjtuybuo Aqvjwg -Quantity: 5 pieces controller available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece

Condition: good (used), Temperature controller, tempering device, temperature control device, modular tempering device, tool heating, hot runner control device -Manufacturer: Ewikon, temperature control unit hot runner control unit -Type: 66010.100D -Power: V:625 VA / 230V: 3 kVA Nwedpfx Asvn Iqheqveg -Transport dimensions: 450/350/H230 mm -Weight: 15 kg

Condition: good (used), Hazard lights, night markings, flashing lights, day/night markings -Reetec: Control system for hazard lights in wind turbines -Type: W, red slimline THSLW -Dimensions: 210/255/H70 mm -Weight: 3.5 kg Nwedpfx Aqofmgu Deveg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: KROt-96/a,re11 -Setting value: from 0 to 1200 °C -220 V 5 A Price: per piece -Quantity: 2 available -Weight: 0.6 kg Nodpob A Sv Tofx Aqvewg

Condition: good (used), Year of construction: 2011, Temperature control unit, heating system, hot water boiler, hydronic system, hydraulic station for high-pressure cleaner, high-pressure pump Nwjdpeqw D Dpofx Aqveg -Temperature control units for: water -Electric heating for: pressure washers, high-pressure pumps -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -Permissible operating overpressure: 6 bar -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Nwsdpjv E Uirofx Aqvsg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: Sigmagyr RVP210.1 Nwjdpfx Aqob A Itmsveg -Weight: 0.8 kg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: SR71-8Y1-1C Price: per piece -Quantity: 7x Available Nedpfx Aeb A Skgeqvjwg -Weight: 0.3 kg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting Nodpfxsb A Nfyj Aqvjwg -Type: Bitric M1-B -Setting value: from 0 to 400 °C -Auxiliary power: 220 V 50/60 Hz 5 VA -Output: 1x changeover contact max. 220 VAC 4 A 900 W -Price: per piece -Quantity: 3 available -Weight: 1.1 kg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: HROt-48/k,ap,os -Setting value: from 0 to 1200 C NiCr-Ni"K" -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Number: 4x available Nodpsb A Skdsfx Aqvswg -Weight: 0.5 kg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting Nedpfxsb A Skce Aqvewg -Type: HROt-48/k,ap -Setting value: from 0 to 1200 C NiCr-Ni"K" -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Quantity: 6x Available -Weight: 0.5 kg

Year of construction: 2000, condition: good (used), Number: 0107058 Cooling capacity: 1,100 W at +6° C Cooling capacity: 1.270 kcal/h at +6° C Max. temperature: 44 °C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Nsdpohri Ahefx Aqvowg Weight: 80 kg

Condition: excellent (used), Autotherm Here we offer you a 6-circuit temperature control device. Without active refrigerating machine! According to the enclosed technical brief description: Temperature range: -40°C ... +85°C (extended temperature range -40°C...+130°C) increased heating power 27 kW instead of 18 kW with 1x temperature control included in the main line with 6x temperature measurement in the respective flow included with 6x temperature measurement in the respective return included with 6x volume flow and pressure measurement in the respective flow included with 6x volume flow and pressure control included 1l/min ... 12 l/min and 0.1 bar ... 3 bar incl. release control incl. FU-controlled pump in the main line incl. 6x 3-way valve with 6x additional overflow valve 2 ... 12 bar adjustable included preset to 2,4 bar with filling and draining device included for all circuits together/simultaneously Nwjdpfx Aekn Nilsqvog incl. 50l integrated tank incl. pneumatic emptying function with control S7 incl. included Energy saving and cooling capacity extension: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity at a flow temperature of +20°C: 50 kW. This increases the cooling rate in this temperature range and saves energy due to the lower running time of the refrigerant compressor. (Footprint of the basic unit according to data sheet increases by approx. 0.3 m²) Assembly in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm 1x additional, closed switch box min. 600x600x2000 mm (for control/electrics) Supplied via on-site or optional cooling medium supply Flow temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h continuously controlled For cooling capacity a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale ex location! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a control unit. Control unit for RIVSET self-pierce riveting system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Nwedpfx Aspgul Eeqvog Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Stäubli Measuring Robot Nwedpofz Dhtsfx Aqvsg Here we offer a very well maintained Stäubli measuring robot. Measuring robotics to measure, analyse and evaluate quality features RobFlow (measuring robotics software) full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical data: Measuring range 0.1 ... 50 m on natural, diffuse reflecting surfaces, 50 m to a maximum of 150 m on reflector panel Linearity ±2 mm (+15°C ... +30°C), ±5 mm (-10°C ... +50°C) Resolution 0,1 mm Repeat accuracy ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C ... +50°C Storage temperature -20°C ... +70°C applications: RobFlow is a modular system, the range of functions of the standard package can be extended by additional Plugins for special tasks as well as customer-specific extensions can be added. With the help of the available functions, the following applications can be implemented, for example: Infotainment tests: Optical and haptic tests Single actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Wide measuring range due to multiple calibrated Force/torque sensor Easy to [...]

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz Nwodpeuigrzofx Aqveg 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock test system Working climate area Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions Width 1100 mm Height 2300 mm Depth 2300 mm Test chamber dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Nwsdpfx Astqcu Esqvjg Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Nwodetrf Ulepfx Aqvsg Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.