Used Thermal Platesetters for sale (1,291)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Dujdpfx Amjy Hkd Hs Tew Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm Dsdpfx Amjzizr Rj Tsuw - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Duedpoziznfofx Am Tew Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel Dedpfx Ajzizk Hsm Touw - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Dusdpfjziycbsx Am Tsw Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Dedpfxoziyb Ro Am Teuw Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, mileage: 2,42,890 km, power: 471 kW (640.38 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.640 LL SA "INDIVIDUAL LION" First registration 07/2021 Mileage 242,890 km Engine D38 with 15-liter displacement and 471 kW/640 hp GX cab with 1 bed, electric glass sunroof, 12.3-inch Professional combined instrument cluster, control panel in the driver's door with 4 functions, ALCANTARA/LEATHER seats, comfort driver's seat with seat heating and seat air conditioning, Vario/rotating co-driver's seat, rain sensor, light sensor with high beam assistant, Climatronic air conditioning, water heater, STAND-ALONE AIR CONDITIONING SYSTEM, tinted windows, LED headlights, LED fog lights, LED cornering lights, LED taillights, 2x air horns, STABO CB radio, additional thermal and acoustic cab insulation, refrigerator under the bed, truck navigation, MAN sound system with subwoofer, smartphone integration, 220-volt connection in the cab INDIVIDUAL LION: cabinet combination with 3 storage compartments on the rear wall Safety package: Lights and Visibility Safety package: Driver Comfort Package Interior lighting package Plus Storage package LightFix stainless steel roof lamp bar with 4x LED spotlights MAN TipMatic 14.27 DD, with Idle Speed Driving software, rocking function, EfficiencyPlus Retarder + high-performance engine brake MAN EVBec FULL AIR SUSPENSION Batteries AGM Super-Longlife Wheelbase 3,600 mm Aluminum diesel tank, right 580 + 480 liters, left Tires: Front axle 385/65 R 22.5, Rear axle 315/70 R 22.5 Fifth wheel height approx. 1,170 mm Djdpfx Aozhzncom Touw ALCOA aluminum rims Dura-Bright high-gloss RENTING is the new BUYING, and with us, it is also immediately available in a full-service rental package.

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ Duodsu Nxatopfx Am Tjw *

Condition: new, Brand new electric actuator from the renowned German manufacturer AUMA. Professional device designed for industrial automation, suitable for the operation of valves, gates, dampers, and other industrial fittings. The actuator is in stock condition – unused. Robust industrial design with a manual emergency handwheel and high ingress protection class IP68. Technical data: Manufacturer: AUMA Riester GmbH & Co. KG Model: SAR 07.6-F07 Order number: 13384379 Serial number: 1417MD37537 Output speed: 22 rpm Closing torque (T zu): 30–60 Nm Opening torque (T auf): 30–60 Nm Protection rating: IP68 Operating temperature range: -30°C to +70°C Lubrication: F15 Motor data: Motor type: VE0R048-2-0.120 Power: 0.12 kW Supply: 1~ 220-240V Frequency: 50 Hz Current: 1.8 A Capacitor: 25 µF Cos φ: 0.97 Motor speed: 2800 rpm Duty cycle: S4-25% ED 1500 c/h Insulation class: F Thermal protection Protection rating: IP68 Applications: - Industrial automation - Valves and dampers - Water and process installations - Power generation - Chemical industry - Industrial fittings control systems Dedpfx Asy Su Erem Teuw

Condition: new, Brand-new electric actuator from the renowned German company AUMA. Professional device designed for industrial automation, operation of sluice gates, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 protection rating. Drive nameplate data: Duodsy Skm Eopfx Am Tsw • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection rating: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Motor nameplate data: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 • Power supply: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Duty type: S4 – 25% ED 1200 c/h • Protection rating: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Applications: • Industrial automation • Industrial fittings • Sluice gates and dampers • Water supply installations • Power engineering • Technological systems Condition: new / warehouse The price is for one piece.

Condition: used, functionality: fully functional, Year of construction: 2021, !! Short delivery time, we are happy to advise you !! Djdpfju T N Umox Am Touw A simple flow pack machine suitable for packaging various products. You have the option to inspect it locally before making a purchase decision. 3 units available Used. Thermal transfer printer available as an option: €1,900

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance. Dodpfeinwi Hox Am Tsuw

Condition: excellent (used), Year of construction: 2011, We offer a used GEA-CFS TwinGrill TWG 1800/600 — an industrial machine designed for continuous grilling, toasting, and thermal processing of a wide range of food products. The machine is ideal for meat, poultry, and fish processing plants, as well as facilities producing convenience foods, ready-to-eat meals, and semi-finished products that require consistent and controlled heat treatment. The GEA-CFS TwinGrill TWG 1800/600 model is designed as a continuous grilling line made of stainless steel. The unit utilizes a dual grilling system with independently adjustable upper and lower heating zones. The temperature of the upper and lower grills can be adjusted separately, allowing for precise adaptation of the process to the type of product, its thickness, texture, and the desired final result. The machine allows products to be grilled on both sides, ensuring uniform cooking results, an attractive surface appearance, and consistent quality across successive production batches. A temperature range of 50 to 260°C and an adjustable belt speed ranging from 0.3 to 3 m/min allow the grilling time to be tailored to various food products. The TwinGrill is equipped with an intuitive control panel and a user-friendly interface that simplifies operation, process monitoring, and the setting of operating parameters. The ability to create and adjust processing programs allows for better control over the cooking and grilling process, as well as increased production consistency. Thanks to its hygienic design, high-quality stainless steel construction, and belt-cleaning system, the unit is easy to clean and suitable for use in the food industry. Additional features, such as removable grill plates and grease collection systems, facilitate routine maintenance and keep the unit clean. The GEA-CFS TwinGrill TWG 1800/600 is a versatile solution for grilling meat, poultry, fish, vegetables, formed products, burgers, cutlets, and ready-to-eat convenience foods. The machine can operate as a standalone unit or as part of a larger production line, e.g., following forming, marinating, breading, or preliminary processing of the product. Technical specifications: Manufacturer: GEA CFS Bakel B.V. Model: TWG 1800/600 Type: TwinGrill / industrial double-sided grill Dodpfx Amezicute Tjuw Machine number: 662 Year of manufacture: 2011 Net working length: 1800 mm Conveyor belt width: 600 mm Power supply: 400 V Phases: 3 Ph Frequency: 50 Hz Installed power: 97 kW Heating power: 93 kW Temperature range: 50–260°C Belt speed / grilling time: 0.3–3 m/min Belt cleaning system: included Construction: stainless steel Weight: approx. 2250 kg Applications: grilling burgers grilling cutlets and formed products processing poultry fillets production of grilled meat products processing fish products grilling vegetables production of ready-to-eat meals production of convenience foods Lines for grilled, roasted, and cooked products Meat, poultry, and fish processing plants Large-scale food service and catering production

Condition: good (used), functionality: fully functional, mileage: 43,150 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,300 mm, overall weight: 3,400 kg, first registration: 03/2023, next inspection (TÜV): 12/2027, emission class: euro6, energy efficiency: D, color: black, number of seats: 9, number of previous owners: 1, machine/vehicle number: R-WS7697, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, trailer coupling, winter tires, Special Equipment: TAXI Package Dedpfxezhg Uno Am Touw Audio navigation system Ford SD (with Ford SYNC 3), tilting window(s) in the cargo/passenger compartment, rear window wiper, configuration with specific central locking system, alloy wheels 6.5x16 (10-spoke), metallic paint, rearview camera with color display, Seat Package 2: driver's seat (4-way adjustable) – double passenger seat, artificial leather, step under sliding door on the left, tinted rear windows (privacy glass), thermal insulation glazing for cargo/passenger compartment, medium tinting grade. Additional Features: 2nd battery, overhead storage in driver's cab, passenger airbag, driver's airbag, active cornering lights, traction control (ASR), electrically adjustable and heated exterior mirrors, turn indicator integrated in exterior mirrors, flooring: rubber in cargo/passenger compartment (full coverage), onboard computer, headliner trim in passenger compartment, entry lights, electronic brake-force distribution (EBD), electronic traction control, assistance system: hill start assist, assistance system: emergency brake assist, assistance system: crosswind assist, fixed window in cargo/passenger compartment: 2nd row left, fixed window in cargo/passenger compartment: 2nd row right, fixed window in cargo/passenger compartment: 3rd row left, fixed window in cargo/passenger compartment: 3rd row right, 240 A alternator, SelectShift automatic gearbox (6-speed), B-pillar grab handle, front grab handles, lockable glove compartment, rear wing doors with glazing, interior filter: pollen filter, body/build: standard minibus, body variant: standard roof, black radiator grille, steering column (steering wheel) adjustable in height/length, model update, engine 2.0 L – 96 kW EcoBlue CAT, front and rear parking sensors, radio preparation, 4 speakers, wheelbase 3300 mm, full wheel covers, tire pressure monitoring system, spare wheel with identical tires, low emissions according to Euro 6d emissions standard, gear/selector lever in leather, interval wipers, adjustable, H4 headlights, sliding door right side cargo/passenger compartment, front mud flaps, front and rear mud flaps, side protection moldings, seat covers/upholstery: artificial leather, seats in cargo/passenger compartment: 1st row, double tiltable, seats in cargo/passenger compartment: 2nd row, double tiltable, seats in cargo/passenger compartment: 3rd row, single seat right, double seat left, start/stop system, 12V socket in cargo/passenger compartment, partially painted bumpers, style color package, LED daytime running lights, Trend, plastic paneling in cargo/passenger compartment, 4 lashing eyes, additional electric heater, second key with folding remote control.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), REM SC 35 CNC 1S | CNC Vertical Turret Lathe | Ø3,500mm | 30 Tonnes Robust single-head CNC Vertical Turning Center from REM Bacau — engineered for high-torque, large-diameter turning with outstanding precision and reliability. TECHNICAL SPECIFICATIONS: • Max. Machining Diameter: 3,500 mm • Min. Machining Diameter: 0 mm • Max. Part Height: 3,000 mm • Max. Table Load: 30 tonnes • Table Diameter: 3,000 mm • Table Speed Range: 2–130 rpm • Main AC Motor (Turning): 100 kW • Max. Faceplate Torque (Turning): 105,000 Nm • Ram Vertical Stroke (Z-axis): specified in full datasheet Djdpfstpnlwox Am Tsuw KEY ADVANTAGES: ✔ Single precision head — ideal for high-accuracy turning jobs ✔ Massive 30-tonne workpiece capacity ✔ 100 kW AC main drive for continuous heavy-duty performance ✔ Full CNC control — available with Siemens or Heidenhain ✔ Rigid, thermally compensated construction Applications: Wind energy components, large flanges, rings, turbine housings, pressure vessels. Manufactured by REM Bacau – Romania | 60+ years of VTL manufacturing. Available for inspection. Worldwide export. Contact us for full datasheet, video, and quotation.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Duedoywgaxepfx Am Tow Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: used, mileage: 1,39,000 km, power: 95 kW (129.16 HP), first registration: 02/2016, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 7,000 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, air conditioning, central locking, soot filter, Buy online. Finance digitally. Get it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3434]---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, old or new Optional extras: * 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery---- Summer offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT shown German vehicle Damage-free 1st owner Regularly maintained Immediately ready for use Dimensions, overall: Length = 6,961 mm / Width = 1,993 mm / Height = 2,612 mm Dodpfx Ajzikf Hom Teuw Total weight: 3,500 kg / Unladen weight = 2,350 kg / Payload = 1,150 kg Load compartment dimensions: 4,300 mm / Width = 1,780 mm / Height = 1,940 mm Trailer coupling: 3,500 kg possible Maxi High + Long Automatic climate control Auxiliary heater Rear view camera Comfortable driver's seat Load compartment with shelving Bluetooth multimedia function Special equipment: Audio system Audio 10 (radio with CD player), exterior temperature display, roof control panel with reading lamp driver/passenger side, rear door (opening angle 270 degrees), wooden floor in the load compartment, metallic paint, Parktronic system (PTS), rear stabilizer, reinforced front stabilizer, step on rear door, lining in the load/cargo area: plywood, auxiliary heater (air) electric Additional equipment: 3rd brake light, adaptive brake light, driver's airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both sides, exterior mirrors with integrated turn signal, battery 74 Ah, brake assist, braking system with ABS+ASR, headliner in the driver's cab, lockable glove compartment, body/structure: high-roof standard van, child lock, fuel tank: main tank 75 liters, continuous load compartment bulkhead, load securing/lashing eyes, headlight range adjustment, model revision, engine 2.1 liters - 95 kW CDI CAT (2143 ccm), wheelbase 4325 mm, smoker's package, tire repair kit with compressor, low emission according to Euro 5 emissions standard, sliding door load/passenger compartment right, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, seats in the driver's cab: passenger seat adjustable, service interval display Assyst, thermal protection glazing, permissible gross weight 3.5 t ---- Do you want to lease or finance? We offer attractive options – even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sales are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump Duodpfx Amozi Sd De Tsw oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor Dodpfx Ajziawrom Touw - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Dusdpszii A Refx Am Tsw Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Djdpfjziizyox Am Touw Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2013, Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Technical data  Dsdpfoyw Abfjx Am Touw - Capacity: 250 liters per batch - Application: Brewing - Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) - Heating system: Electric - Temperature control: Automatic - Safety system: Thermal safety alarm - Cooling: Plate heat exchanger - Electrical supply: 400 V, three-phase - Installed power: 15 kW Scope of Delivery  - Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control - Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmission surface: 0.63 m², Design pressure: 10 barg, Volume: 1.5 L, Design temperature: 0 – 100 °C - Malt mill | Sommer | Piccolo 11S | 2013 | Capacity 100–150 kg/h

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  - Brewhouse (Brewiks 500, 2018) - Capacity: 5 HL - Heating: Electric, 36 kW - Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) - 6 CCTs × 12 HL useful capacity - Pressure rating: 3 bar - CIP Stations (Svoboda CIP 100) - 2 mobile CIP units - Tank capacity: 100 L (alkaline + acid) - Canning Line (Wild Goose GOSLING, 2021) - Semi-automatic - Formats: 0.33 L / 0.44 L / 0.50 L - Cooling (Quantor Chilly MAX 50L) - Glycol chiller for CCTs - General Key Information - Power supply (various units): 230–400V, 50 Hz - Applications: Brewing, fermentation, can filling Scope of Delivery  - Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) Duedpfxoyb R Iae Am Tow - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) - Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity - Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used - Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L - Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L - Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer - Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing - Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank - Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min - Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) - Water tank | ROTH | — | — | 2× 750 L - Malt mill | Sommer | Maltman 220 | — | Precision mill - Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  - Capacity: Up to 2,000 bph (operated between 500–1,000 bph) - Filling System: Isobaric, counter-pressure - Filling Valves: 5 - Bottle Formats: 0.33 L and 0.75 L (adjustable) - Can Formats: Standard 0.33 L - Closure Systems: Integrated can seamer and crown capper - Construction: Stainless steel - Working Pressure: up to 3 bar Djdpfxoxn Uf Ie Am Tsuw - CO₂ System: Pre-evacuation for cans, vacuum for bottles - Controls: Touchscreen with adjustable parameters - Mobility: On wheels with adjustable legs - Condition: In use, regularly maintained Scope of Delivery  - Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker - Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking  

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data - Capacity: 7,500 bottles/hour - Adjustable speed range: 3,750 – 7,875 bottles/hour - Cycle time: 6.72 seconds - Total treatment time: 11.65 minutes - Bottle formats: Up to Euro-NRW - Bottle rows per carrier: 14 - Bottles inside machine: 1,456 - Bottle carrier trays: 110 - Effective spray times: - Hot lye 8.96 seconds - Lye II 8.96 seconds - Hot water II 8.96 seconds - Hot water I 8.96 seconds - Cold water: 13.44 seconds Dodpfx Aoxn A S Nom Tjuw - Fresh water max.: 8.96 seconds - Utilities - Water consumption: 3.25 – 3.38 m³/h at 60°C - Power connection: 12.0 – 12.9 kW - Thermal energy consumption: 3,528 × 1000 kJ/h - Dimensions - Length with cabinet: 7,020 mm - Width of frame: 1725 mm - Height: 2300 mm