Used Thermal Bridges for sale (2,199)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Baden-Württemberg
6,807 km
Lead and feed screw lathe
MATRAMD40
Condition: used, machine/vehicle number: 3045, No minimum price – guaranteed sale to the highest bidder!
Loading: December 1st to December 10th.
TECHNICAL DETAILS
General Information
Manufacturer: Matra
Model: MD40
Machine Type: Pull and lead spindle lathe
Machine Weight: approx. 4.8 t
Working Area
Turning diameter over bed: 870 mm
Turning diameter over carriage: 520 mm
Turning length: 2,100 mm
Turning diameter in the pit: 1,080 mm
Pit length: 430 mm
Spindle
Speed stages: 24
Speed range: 8–1,000 rpm
Spindle bore: 103 mm
Slides and Travels
X-axis: 1,830 mm
X²-axis: 160 mm
Y-axis: 415 mm
Compound slide travel: 450 mm
Top slide travel: 160 mm
Feeds
Longitudinal feed stages: 104
Longitudinal feed: 0.1–61.6 mm/rev
Hfsdpe Aa Az Ssfx Accop
Longitudinal feed: 0.0038–2 19/64 in/rev
Cross feed stages: 104
Cross slide feed: 0.3–18.4 mm/rev
Cross feed: 0.0012–47/64 in/rev
Rapid traverse longitudinal: 5,140 mm/min
Rapid traverse cross: 2,570 mm/min
Thread Cutting
Thread pitches: 72
Metric thread pitch: 0.5–240 mm
Inch thread: 60–1/8 threads/inch
Module thread: 0.125–60 mm
Tailstock
Tailstock cross travel from center: 10 mm
Arbor mount: MK 6
Arbor stroke: 280 mm
Electrical Data
Frequency: 50 Hz
Operating voltage: 380 V
Control voltage: 220 V
Rated current: 30 A
Fuse rating: 50 A
Total power consumption: 13 kW
Dimensions
Footprint: approx. 4.1 × 1.5 × 1.9 m
EQUIPMENT
Original Forkardt F400 3-jaw chuck
Removable bridge
Original MiniWizard 2-axis digital display
3 glass scales
Multifix quick-change tool holder
Swiveling spindle guard with safety switch
2 safety emergency stop buttons
Lockable main switch
Important note: The machine vises and the steady rest visible in the pictures are not included in the scope of sale and delivery!
Success:
Your message has been sent.
Listing
Warszawa
6,060 km
Development equipment
SirioTH85T thermal processor
Call
Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP.
MACHINE IS READY TO WORK.
Hfodpfxszquq Aj Accjp
Success:
Your message has been sent.
Listing
El Prat de Llobregat
7,450 km
Regenerative Thermal Oxidizer
FLOW & THERMAL
Call
Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021)
Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer.
Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025.
The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption.
Main features
• Manufacturer: Flow & Thermal Solutions / TECAM
• Year: 2021
• Serial number: F002
• RTO nominal capacity: 18,000 Nm³/h
• Configuration: three-chamber regenerative RTO
• Fuel: natural gas
• Honeywell / Eclipse TJ 200 burner
• Burner output: 58–586 kW
• Electrical supply: 400 V, 50 Hz
• Electrical power stated on the nameplate: 40 kW
• 30 kW Soler & Palau ATEX main fan
• Siemens PLC automation with HMI touchscreen
• LEL monitoring, purge, dilution, bypass and pneumatic valve systems
• Vertical stack: 10 m high, diameter: 800 mm
• CE marked
Performance and operation
The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h.
The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values:
• TOC: 13 mgC/Nm³
• NOx: 3–4 mg/Nm³
• CO: 125–153 mg/Nm³
During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h.
Stripping columns
The system includes:
• Original stripping column, designed for approximately 6 m³/h.
• Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h.
The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable.
The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system.
Condition and maintenance
The system remained operational until the final closure of the plant in November 2025.
The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing.
The equipment was operational, although maintenance work is required before recommissioning, mainly involving:
• Process valves
• Internal insulation of the towers
• Ductwork and seals
Hsdpfjzvcknsx Accofp
• Main fan impeller and expansion joints
• Repair of the base of the second stripping column
TECAM technical documentation is available regarding the recommended works, and several spare parts are also available.
Scope of supply
The system includes:
• Three-chamber RTO
• Combustion chamber
• Burner and gas train
• Main fan
• Two stripping columns
• Dilution and purge system
• Hot bypass
• LEL analysers
• Stack
• Ductwork
• Electrical cabinets and controls
• Platforms, ladders and support structures
• Available spare parts

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Satu Mare
5,824 km
Marine blanket highly insulating fire
Morgan Thermal CeramicsMorgan Thermal Ceramics FireMaster® Mari
Call
Year of construction: 2018, condition: new, FireMaster
Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S
SUPER DISCOUNT!
19 Euro pallets available
16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes
Material dimensions:
Thickness 13 mm
Width 620 mm
Length 14,640 mm
Density kg / m3: 96
Price per box 100 EUR + VAT
In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania
Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature
FireMaster® Marine Plus blanket: 1200°C (2192°F)
Fire reaction properties
Non-Combustible in accordance with IMO FTP Code Part 1
Index < 0.5 when tested in accordance with UK MOD Defence
Standard 02-713
Class A1 Reaction to Fire in accordance with EN 13501-1
Thermal insulation performance
Thermal insulation at ambient temperatures
R Values (m² K/W) and corresponding U values (W/m²K).
For densities above 80 kg/m³ the values for 80 kg/m³ may be used
Hfjdpjh Rawuefx Accjp
Basis
Thermal conductivity measured at 10°C using BS EN 12667 method
48 kg/m³ 0.0321 W/mK
64 kg/m³ 0.0319 W/mK
70 kg/m³ 0.03164 W/mK
80 kg/m³ 0.03144 W/mK
Thermal conductivity at high temperatures
Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method
Please check the attachment with the technical data.
We reserve the right to make mistakes, changes and prior sale
Irrtum, Anderungen und Zwischenverkauf vorbehalten /
Subject to errors, changes and prior sale /
Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila.
We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana
Success:
Your message has been sent.
Listing
Germany
6,760 km
Reflow Soldering
Rehm Thermal SystemsVXP nitro 3150 (Typ 634)
Call
Condition: used, Year of construction: 2010, A reflow soldering oven with nitrogen operation is offered. Power: 70kW. Nitrogen consumption: approx. 21m³/h. Cooling: 20l/min at min. 2bar. Exhaust air: 400m³/h. Inspection possible by arrangement.
Hfjdpfxe Ahq Nke Accep
Discover more used machines
Success:
Your message has been sent.
Listing
Ulft
7,045 km
CNC panel processing machine
FicepTipo G25LG (S/N 36098)
Call
Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019
The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame.
CONDITION & REFURBISHMENT
Refurbished and inspected by a certified technician, ready for operation.
- The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest.
- Viewing possible by arrangement (machine reconditioned - no demonstration under power).
FUNCTION & APPLICATION
The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate.
The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering.
TECHNICAL DATA
- Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098
- Machine type: CNC plate processing line (drilling / milling / thermal cutting)
- Condition: used, refurbished by certified technician
- Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg
- Plate width: max. approx. 2,540 mm, min. 200 mm
- Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling)
- Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40
- Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm
- Max. spindle speed: 7,000 rpm | Spindle power: 15 kW
- Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A
- Oxy-fuel cutting unit: included
- CNC control: Ficep Pegaso CNC
- Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting
On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions.
SCOPE OF DELIVERY
- 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019)
- 1 x Ficep Pegaso CNC control
- 1 x Vertical mono drilling unit with automatic tool changer (ISO 40)
- 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A)
- 1 x Oxy-fuel cutting unit
- 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m)
- 1 x Extraction system for plasma cutting
LOGISTICS & LOCATION
Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request.
Hfodou Dw I Eopfx Accop
ABOUT ASM
Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request.
CONTACT / INQUIRY
Viewing by arrangement | Price on request.
Sale exclusively to commercial customers (B2B).
Success:
Your message has been sent.
Listing
Budaörs
6,105 km
Ice cream machine
CarpigianiLabo 30 45
Call
Condition: reconditioned (used), functionality: fully functional, We are selling a Carpigiani ice cream freezer from our service center. It is in good condition and has a capacity of 45 kg per hour. It is ready for use with a new thermal bridge and a dispensing window. 380V.
Hedpfxj Afbw Aj Accsfp
Success:
Your message has been sent.
Listing
Berlin
6,561 km
Coordinate measuring machine
ZeissAccura 16/24/10
Call
Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 145222060650, measuring range X-axis: 1,600 mm, measuring range Y-axis: 2,400 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 4,000 kg, total height: 3,610 mm, total width: 2,627 mm, total length: 3,160 mm, overall weight: 11,500 kg, input voltage: 240 V, table width: 2,500 mm, table height: 800 mm, table length: 3,160 mm, Equipment: documentation/manual, type plate available, Year of Manufacture: 2022 – Modern, state-of-the-art system in excellent working condition.
Hodpfx Ace Afhnujcsfp
Premium bridge-type coordinate measuring machine (CMM) from the world leader in industrial metrology.
Maximum flexibility thanks to a modular sensor platform.
Outstanding thermal stability, ensuring reliable results in real-world shop floor environments.
Annual ZEISS Service & Calibration:
Maintained and calibrated exclusively by original ZEISS service technicians every year.
Full Traceability:
Machine accuracy is fully documented and certified according to international standards.
Equipped with a ZEISS VAST scanning head.
Success:
Your message has been sent.
Listing
Tatabánya
6,150 km
Automatic Powder Coating Line GEMA
GEMAQCS 03 25-310
Call
Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine
Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft.
Type / Model: GEMA QCS 03 25-310 (Powder coating booth)
Year of manufacture: 2008
Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor)
Condition: Used, good industrial condition
Dimensions and capacity:
- Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs)
- Maximum workpiece size: 2500 x 800 mm
- Conveyor line speed: High-capacity, 2 m/min
- Exhaust air volume (booth): 16,000 Nm³/h
- Cyclone dust collector extraction capacity: 8000 m³/h
- Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22
Main system components and technical specifications:
1. Surface Pre-treatment Tunnel (Recycolor Kft.):
- Continuous multi-zone degreasing, (phosphating), and rinsing system.
- Final rinse zone: DI (demineralized) water rinse stage.
- Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination.
- Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies.
- Dehumidification / Exhaust: Fan extraction with droplet separator.
- Control system: Fully automated PLC control.
2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System:
- GEMA quick color-change booth with integrated overhead conveyor.
- Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke.
- Pre-touch manual spraying area at the inlet for complex geometries.
- Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan.
- Bottom cone with swing-out sieve unit for automatic or manual powder recycling.
3. Water Drying and Powder Curing Oven (Recycolor Kft.):
- Fuel type: Natural gas
- Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar)
- Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar)
Hfsdj Af I Hdjpfx Accjp
- Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power)
- Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air.
- Operating temperature range: Adjustable between 60 – 220 °C.
Success:
Your message has been sent.
Listing
Salzburg
6,553 km
Thermal treatment system / vacuum dryer
WTTThermobehandlungsanlage / Vakuumtrockner
Call
Condition: used, No. 3213
Thermal treatment system / vacuum dryer WTT
Used, year of construction 2017
Thermal treatment system / thermal chamber for the modification of wood
The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium.
Technical data:
Hfjdev Si Szjpfx Accjp
Capacity: 5950 - 9900 m³ of wood per year (for 330 working days)
Usable volume: 9 m³ (with 50 mm wood thickness)
Stack dimensions: 10500 x 1300 x 1100 mm LWH
Minimum board thickness: 10 mm
Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A
Specific power consumption: 15.9 kW/m³
Maximum heat output: 2 MW (230 °C - 250 °C thermal oil)
Heat consumption: 120 kWh/m³ wood
Autoclave length: 11,000 mm
Autoclave diameter: 1,800 mm
Autoclave material: 10 mm stainless steel duplex EN 4462
Door opens hydraulically, with 1.5 kW drive
Working pressure: 0.1 to 15 bar (absolute)
Working temperature: 0 °C to 220 °C
200 mm glass wool insulation, clad with 1 mm galvanized sheet steel
Main components:
1. autoclave, in which the heat treatment takes place
2. vacuum system that sucks the air out of the autoclave before heat is applied
3. energy center with a 2 MW oil burner
4. 4 MW cooling system with dry coolers
5. nitrogen generator
6. gas cooler system
Heating and cooling system:
Heat exchanger: 8 units (4 on each side)
Material: Stainless steel pipes (seawater resistant)
Total floor area: 165 m²
Cooling water consumption: 1000 l/batch (not contaminated, only heated)
Control and operation:
Control system: WTT ExoT (fully automatic)
22” color monitor, IBM computer, printer
Sensors:
4 PT100 temperature sensors
2 mechanical thermometers
1 vacuum/pressure transmitter
1 mechanical vacuum/pressure gauge
Special equipment:
Hydraulic rail bridge for convenient transportation of wooden trolleys
Automatic trolley extraction with cable winch (1.5 kW)
2 MW thermal oil boiler (heating)
Fuel oil tank (4000 l) with measuring system
Insulated 20 foot steel container for heating module
Stainless steel safety chimney (300 mm diameter, 6000 mm length)
Functional description:
1. filling the autoclave with wood
2. creating a pre-vacuum
3. filling with gas
4. heating
5. modifying
6. cooling
7. pressure equalization
8. creating a post-vacuum / drying
9. pressure equalization
10. emptying
Certified EC Pressure Equipment Directive (PED) 97/23/EF
Construction EN 13445
Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly
Dismantling, loading and transportation by us optionally possible
Subject to errors in the description and price
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
Sold as is
Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “purchased as seen”
Pictures and videos serve as examples and do not represent the actual scope of delivery
Terms of payment: Prices excl. VAT, payment before collection or dispatch
Terms of delivery: ex location
Success:
Your message has been sent.
Listing
Gelsenkirchen
6,993 km
Portal straightening press 300 T
HidrobrasilRichtpresse
Call
Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity
a) idle and pressing speed up to 17 mm/sec.
b) opening speed up to 55 mm/sec
c) table size 2500x1600mm
d) open height 700 mm
e) total size approx. LBH 4500 x 2300 x 3700 mm
f) Oil temperature indicator on the tank
g) Lubrication via grease nipple
h) table in grid construction,with T grooves according to customer's request, otherwise 22mm
i) operation on swivel arm, mounted on the bridge
j) pressure adjustment from 50 T to 300 T via MONITOR
k) bridge moves by two gear motors, via racks
l) Cylinder moves to the left and to the right via toothed racks
m) Machine body double painted
n) Cylinder induction hardened
Hfsdpfx Aceh Agnuscep
Type of construction
Press design PORTAL PRESS
Thermally neutral 80 - 120 °C
Number of operating sides 3 side
Forces
Pressing force max. 3,000 kN
Free ripping force max. 500 kN
Pressure build-up time Closed die Steel to steel Max. 3 sec.
Dimensions
Max. Opening width 700 mm
Stroke and min. opening 700 mm/ 0 mm
Table height above floor approx. 9ß0 mm
Height above floor (headroom) approx. 3700 mm
Hall height min. 5.000 mm
Deflection
Determined at max. clamping force with 70% occupancy < = 0.8 mm/m
Weight
Total weight of press without operating materials and table plate approx. 22 T
Speeds
Fast closing with 17 mm sec.
Pressing speed 8 mm sec.
Opening 55 mm sec.
Sound pressure
Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A)
DIN 45635-T16-KL3
Hydraulics
Number of pressing cylinders 1 pc.
Operating pressure max. 350 bar
Pressing pressure build-up time 02. mz sec.
Pressure accuracy during pressing stroke +/- 5 bar
Main pump
BOSCHREXROTH approx. 93 L/min
Oil volume approx. HLPD 46 MW 900 liters
Ambient temperature max. 45 °C
Oil temperature max. 55 °C
Electrical system
Main supply 400 V AC
Control voltage 24 V DC
Frequency 50 Hz
Hydraulic connection Main motor IE3 22 kW
Total connection Approx. 30 kW
Success:
Your message has been sent.
Listing
Gelsenkirchen
6,993 km
Gantry straightening press with 400 T ca
HidrobrasilPortalrichtpresse
Call
Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity
a) idle and pressing speed up to 17 mm/sec.
b) opening speed up to 60 mm/sec
c) table size 6000x3000mm
Hsdpfx Acshyc Nwecsfp
d) open height 1500 mm
e) total size approx. LBH 6000 x 5000 x 4500 mm
f) Oil temperature indicator on the tank
g) Lubrication via grease nipple
h) Table in grid construction,
i) operation on swivel arm, mounted on the bridge
j) pressure adjustment from 60 T to 400 T via MONITOR
k) Bridge moves by two gear motors, via toothed racks
l) Cylinder moves to the left and right via toothed racks
m) Machine body powder coated, or double painted
n) T-slots according to customer requirements
o) cylinder induction hardened
PORTAL PRESS
Thermally neutral 80 - 120 °C
Number of operating sides 3 side
Forces
Pressing force max. 4000 kN
Free ripping force max. 600 kN
Pressure build-up time Closed die Steel to steel Max. 3 sec.
Dimensions
Max. Opening width 1500 mm
Stroke and min. opening 1500 mm/ 0 mm
Table height above floor approx. 900 mm
Height above floor (headroom) approx. 4500 mm
Hall height min. 5500 mm
Deflection
Determined at max. clamping force with 70% occupancy < = 0.8 mm/m
Weight
Total weight of press without operating materials and table plate approx. 52 T
Speeds
Fast closing with 17 mm sec.
Sound pressure
Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A)
Hydraulics
Number of pressing cylinders 1 pc.
Operating pressure max. 280 bar
Pressing pressure build-up time 2-3 sec.
Pressure accuracy during pressing stroke +/- 5 bar
Main pump
BOSCHREXROTH approx. 150 L/min
Oil volume approx. HLPD 46 MW 900 liters
Ambient temperature max. 45 °C
Oil temperature max. 55 °C
Electrical system
Main supply 400 V AC
Control voltage 24V DC
Frequency 50 Hz
Connection hydraulics Main motor IE3 30 kW
Total connection Approx. 35 kW
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Powder coating equipment
ROMER/ Electrostatic paintingSL
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
Hfsdpfx Acozduplscop
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Drying oven
ROMEROven SW Series
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Hfedefzb Niepfx Accop
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Powder coating equipment
ROMER/ Electrostatic paintingSL
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Hedpfx Asflk Awoccefp
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Drying oven
ROMEROven SW Series
Call
Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
Hsdsyg H Dzepfx Accofp
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Powder coating furnace oven
ROMERCuring Oven SL Series
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
Hsdpfxofx Nfms Accofp
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Powder coating equipment
ROMER/ Electrostatic paintingSL
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
Hfsdpfoyg H Erox Accsp
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Powder coating equipment
ROMER/ Electrostatic paintingSL
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
Hedpfxoyg H Dhe Accofp
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Industrial furnace
ROMERSW
Call
Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Hsdpofz Anpsfx Accefp
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Oven
ROMERCuring Oven SL Series
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
Hfedpfefy T Spsx Accop
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Rack oven
Romer PolandSL
Call
Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Hjdpfxsfy T H Ij Accofp
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Powder oven
ROMERCuring Oven SL Series
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
Hedsfz Nd Iepfx Accsfp
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Skarżysko-Kamienna
6,037 km
Powder coating furnace oven
ROMERCuring Oven SW Series
Call
Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯
🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅
Hedpfx Asfzccnjccsfp
🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️
🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅
🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉
🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷
⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥
⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅
🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉
👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️
🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️
🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅
🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️
2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁
🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡
Success:
Your message has been sent.
Listing
Duxford
7,469 km
Julabo ED Bath
JulaboED
Call
Condition: used, The unit is in full working condition and is ready for immediate release
A Julabo ED bath is a laboratory circulating water bath system that combines a bath tank with an immersion circulator for controlled heating and circulation of liquids. These units are commonly used to maintain samples or materials at a stable, set temperature in a lab environment.
Typical Applications
These baths are widely used in labs for tasks such as:
Temperature control of samples during incubation, testing, or reactions
Material testing (e.g., plastics, metals)
Calibration of thermometers or thermal devices
Heat treatment in research and quality control contexts
What do E nd D stand for?
E suggests an open bath with circulator mounted on a bridge — the immersion circulator sits on top of the bath tank and drives both heating and fluid movement.
Hodoy Iwz Iopfx Accofp
D designates the controller simplicity level (digital setpoint via keypad with PID temperature control)
We make it easier for you to find: "thermal bridges"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Thermal Bridges (2,199)
Search Machineseeker now with more than 2,00,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month











































































































































































































































































