Used Thermal Transfer Printer for sale (6,791)

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) Ibedpowqx H Refx Aabjc • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: excellent (used), The flagship of the series, the P8000 Cabinet models are the printers of choice when quiet operation and/or high-speed performance is paramount. Acoustically sealed enclosure produces less noise emissions than most laser printers Ibjdpfoxaui Rjx Aabsc Unmatched reliability and tolerance for a wide range of office and industrial environments Available in 500, 1000, 1500 and 2000 LPM speeds P8000 Plus Models — P8C15 & P8C20 — deliver improved print quality and offer optional OpenPrint PDF & PostScript functionality and support for 802.1X and IPv6.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: Durst number 13967, serial B65007, number of ink cartridges: 4, number of print heads: 4, resolution (max.): 400 dpi, total length: 2,010 mm, total width: 3,800 mm, total height: 1,730 mm, year of last overhaul: 2025, type of input current: AC, input current: 25 A, input voltage: 400 V, Rho 162 TS is a hybrid (roll to roll/flatbed) inkjet printer designed for traffic signs applications using specifically developed UV inks by 3M. * Roll-to-roll printing or direct printing on laminated sheets * Meets the European Traffic Signs Standard by 3M UV 8800 Ink Series meeting European Traffic Signs Regulations Isdpfxoxgryte Aabobc * 12 years 3M MCS warranty – durability, reflectivity, color boxes * Maximum printing width 157.5 cm (62 in.) * Maximum printing length – limited by roll length Printer in good working condition, last maintenance was in September 2025. Total print volume 49000m2

Year of construction: 1991, condition: good (used), Calendar thermal sealing machine Tecnoblock Made in Italy machine in good condition, working very well Ibsdpfouq Nn Nex Aabsc year 1991

Condition: used, functionality: not functional, Year of construction: 2007, Printer need to buy new printing heads Iodpfxew Inmaj Aabjbc

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: LEC2 330S KEX0131, number of ink cartridges: 8, number of print heads: 1, resolution (max.): 1,200 dpi, paper width (max.): 800 mm, paper height (min.): 2,000 mm, input voltage: 220 V, Complete flatbed inkjet printer ROLAND, looks like new as the machine has hardly ever been used. Printhead as new. 8 colors, includes BOFA. Located near Paris, France (Elancourt). Iedpfxexpgtaj Aabebc

Condition: used, Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Ibedpfxjxmb Rho Aabsc Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), functionality: fully functional, operating hours: 1,978 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: three-phase, overall weight: 227 kg, input voltage: 230 V, 🎯 For Sale: Stratasys F270 3D Printer – Professional, Excellent Condition 🔧 Type: FDM 3D Printer 🏢 Make & Model: Stratasys F270 📍 Location: Anzegem, Belgium We are specialized in the design and printing of moulds for automotive products. ✅ Technical Specifications • Build Volume: 305 x 254 x 305 mm • Print Materials: ASA, ABS-M30, PLA, ABS-CF10 (carbon fiber), TPU 92A • Layer Thicknesses: 0.127 mm / 0.178 mm / 0.254 mm / 0.330 mm • Support Material: Hands-free soluble & breakaway • Colours: Up to 11, including black • Software: GrabCAD Print • Material Feed: Automatic change-over between trays • Model & Support Material Channels: 2 & 2 • PC Requirements: Windows 10 & 11, app for Apple & Android • Network: Ethernet TCP/IP, Wireless IEEE 802.11n/g/b • Machine Dimensions: 1626 x 864 x 711 mm • Weight: 227 kg • Power Supply: 220–240V, min. 7A • Safety Certifications: CE / FCC / EAC / EMC / TUV / RC / RCM / RoHS / WEEE / Reach 🧰 Included • 2 print heads included: 1 print head for model material, 1 print head for support material, both Ibjdpfsxnz Hrsx Aabjc

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,432 h, General Data Measurements width 940 mm Measurements depth 900 mm Measurements height 1950 mm Iedpoxfw Efjfx Aabjbc Machine weight 350 kg Main Drive Number of axis 3 Additional Equipment Double extrusion head per print module, equipped with a cleaning system for the print head to print complex geometry with soluble support. 3 print modules with different temperature specifications specially developed for the different materials. This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine. Application Types 3D Printing

Condition: repair required (used), Location : Rosendahl small defects Iedpfx Aasuqy Tpjbobc

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 8 h, Equipment: ABS, Industrial printer which was not used at all. Ibedpoxiu Hhsfx Aabsc There was printed just acceptance file model and it is all . Including washing unit for removing of soluable support material which is still unpacked in the box.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, HP Jet Fusion 4200 3D Printing Solution 3D printer, processing station and two build units are in excellent used condition. It was operated in a controlled laboratory environment for the production of orthotic and prosthetic devices and has been under continuous HP service support during its entire operation. Why choose the HP Jet Fusion 4200? • High Productivity: Designed for industrial-scale production, with fast build speeds and short cooling cycles. • Superior Part Quality: Produces strong, functional parts with excellent surface finish and dimensional accuracy. • Cost-Effective Production: Low cost per part with optimized material usage and minimal waste. • Reliable and Proven Technology: Trusted by manufacturers worldwide for its consistency and performance. • Easy Integration: Seamless workflow with HP software solutions and optional post-processing stations. Technical Specifications: • Build Volume: 380 x 284 x 380 mm • Layer Thickness: 0.08 mm • Print Speed: Up to 4500 cm³/hr • Material Compatibility: HP 3D High Reusability PA 12, PA 11, and other supported materials • Connectivity: Gigabit Ethernet Ibsdpjwaw Hbsfx Aaboc Typical Applications: Functional prototypes, production parts, orthotics & prosthetics, jigs & fixtures This is a great opportunity to acquire a professional industrial 3D printer with a strong track record, at a fraction of the original cost.

Condition: reconditioned (used), Year of construction: 2020, EFI VUTEk GS3250LX Pro with UltraDrop Technology (Greyscale, 7 picoliters) Printer from September 2018, first installed in February 2020, only 55.000m² printed. Reconditioned at workshop, cleaned belt, Pro-server Premium included. Heavy duty Unwinder Configuration: 8 colours + w, or fast for 2CMYK + W Excellent printhead status. Installation in Europe available upon request. The versatile, efficient, cost-effective, and environmentally friendly VUTEk GS3250lx Pro with UltraDrop Technology printer features: • Eight colours plus White — White ink in a single- or dual-channel configuration to capture more premium-margin applications — Clear varnish in a single-channel configuration to extend your application offering • Switchable to Fast-4TM for high productivity • Resolutions of true 600 dpi or 1000 dpi • Extended range of supported substrates with innovative LED technology Iodpfjxf D A Rox Aabobc • Greyscale 7pL UltraDrop Technology • Orion operating system • Fast-4: 223 m2 per hour — Up to 60 – 1.2 m x 2.4 m boards per hour • Eight-colour plus white: 111 m2 per hour — Up to 32 – 1.2 m x 2.4 m boards per hour • Continuous print productivity with less than five seconds between boards for faster job turns • Single-pass multilayer printing • Standard multi-queue on-demand functionality • Precision alignment fence for accurate image alignment For further technical information please refer to enclosed brochure.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 1,590 mm, total height: 2,130 mm, total width: 1,610 mm, type of input current: AC, input voltage: 230 V, input current: 30 A, travel speed (max.): 6,000 mm/min, space requirement length: 2,000 mm, space requirement height: 2,500 mm, space requirement width: 3,800 mm, Array – Your Solution for Industrial 3D Printing Production Array is a scalable platform for additive manufacturing, designed for the production of end-use polymer parts directly on your shop floor. Featuring integrated robotics, intelligent software, and high-performance FFF printing, Array reduces labor costs, increases productivity, and delivers series-quality components—on-site and exactly when you need them. Your benefits: Efficient & Cost-saving: Automated processes reduce personnel costs Fast & Flexible: High throughput for your production Industrial Quality: End products in series quality, available immediately Act now: Discover our pre-owned Array systems—inspected, reliable, and offered at attractive prices. ✅ Request your quote now ✅ Immediately available—fast delivery Ijdpfx Aajxl Ry Aebsbc

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand FANUC Ibjdpfoxfwycox Aabjc Model 31i Model B Main Drive Spindle speed range 450-45000 Spindle bore 25 mm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 260 mm Z-Axis Movement 100 mm Tools Slots in storage 20 Max weight 0,5 kg Max tool diameter 10 mm This Matsuura Lumex Avance-25 3D Printer was manufactured in the year 2018 in Japan. It is equipped with a Fanuc 31i Model B control unit and has 3 axis. The machine has a spindle speed of 450-45000 rpm. Application Types 3D Printing

Condition: new, functionality: fully functional, machine/vehicle number: 1325, Year of construction: 2025, Robust, efficient, and user-friendly 3D printer for producing components from resin, rubber, PLA, ABS, PET-G, and other plastics. Operates on three axes (X, Y, Z), enabling the creation of precise, three-dimensional details. Isdpfx Ajxfq Dbjabebc 3D Printer 1325 3D Printer STANDARD EQUIPMENT INCLUDES: - Complete control system - Print head - Dryer and granulate feeder - Software TECHNICAL DATA: - Output from 8 kg/h - Interchangeable nozzles ⌀ 3–12 mm - Air-cooled print head - Compact print head dimensions - Motor power 1.5 kW

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours There are available all model materials licences available in 2019. Iedpfx Aaew Imk Rjbobc New PM Kit is on site and it will be installed just before printer dispatch to the new customer Support removal unit type EFT-900 is available

Condition: excellent (used), Year of construction: 2020, total length: 1,320 mm, total height: 2,204 mm, total width: 1,067 mm, overall weight: 600 kg, feed length X-axis: 200 mm, feed length Y-axis: 250 mm, feed length Z-axis: 330 mm, Plastic 3D printer EOS - P110 Velocis Make: EOS Type: P110 Velocis Control: EOS SYSTEM SUITE Year: 2020 Laser Co2 with 30 W Scan speed 5.0 M/Sec Precision Optic 1 F-theta-lens; 1 High speed scanner X - Travel: 200mm Y - Travel: 250mm Z - Travel: 330mm Plastic printer:SLS Length: 1320mm Width: 1067mm Ibsdsxd Ultepfx Aaboc Height: 2204mm Weight: 600kg FORMIGA P 110 VelocisPA 1100 PA 1101 PA 1101 ClimateNeutral PA 1102 BlackPA 2200 PA 2200 CarbonReduced PA 2201 PA 3200 GFAlumide EOS TPU 1301 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Ijdovzub Hspfx Aabobc Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08E/9059, Offer Number: M08E/9059 Machinetype: 5 die - 5 blow transfer header Isdpjxlr I Iefx Aabjbc Info: bushing cut-off Make: KIESERLING Type: K55 Constr. year: 1979/2002 diameter range: 8-22 mm number of dies: 5 number of stations (incl. cut off): 6 output - pieces/min: 105 shaft length under head: 6-140 mm cutting length: 175 mm press power: 250 to Location: Europe

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Ibsdpjvtftqofx Aabec Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SP0119240003037, Year of construction: 2019, input voltage: 240 V, Equipment: CE marking, Bound Metal Deposition™ metal 3D printing system composed of: - printer - debinder - sintering furnace - frequency converter for 60Hz furnace power supply. System in perfect condition, used for R&D in a climate-controlled environment. Isdpoxlcldjfx Aabsbc Printer equipped with 2 nozzles (0.40mm diameter) and one high-definition nozzle (0.25mm diameter). Furnace equipped with a technical gas supply system from an external installation. Set of original replacement parts for furnace (ceramic setters, graphite retort shelves, gaskets, filters, vacuum pump oil). Firmware updated to the latest release throughout the system. Material cartridges included: 1x AISI 316L 1x 17-4PH 1x ceramic support

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F170, Year of construction: 2018, operating hours: 2,732 h, Rarely used fully functional 3D Printer Washing unit for cleaning of soluable support material included Ijdpfxoxhbxzo Aabobc

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 3,000 mm, total height: 2,000 mm, Industrial 3D Printer – Sinuprint 3000 A state-of-the-art solution for large-format additive manufacturing, tailored for molds, design elements, composite parts, and structural components. Iodpfx Aswgkqtjabobc Sinuprint 3000 combines robotic flexibility with CNC precision, making it the perfect choice for industries requiring robust and scalable 3D printing. Applications range from mold making and shipbuilding to interior design and custom large-scale structures. Key Specifications: Printing system: CEAD E25 or S25 extruder (configurable to customer needs) Robotic arm: COMAU N-170, 3 m reach, 160 kg payload Control system: Siemens SINUMERIK ONE – full CNC control for unmatched accuracy Software compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: Brand new machine Optional add-ons: Heated print table for improved adhesion and print quality Note: Standard configuration includes the CEAD E25 extruder. Software is not included but can be supplied as an optional accessory.

Condition: good (used), Year of construction: 2024, No sale, but financing offer for customers with company headquarters in Germany. Technical data: Ibedpfx Aaew Hdviebec • FLUSHING CARTRIDGE PRO L5100 SERIES • RDE BLUE ANGEL STICKER UZ219 100X30 • AVERY MPI3000 BUNDLE MEDIA FOR KOJIKI SERIES • Green Button Installation Available from: immediately Delivery terms: ex location – EXW Wiehl Payment terms: payment before collection Accessories without warranty. Applies: "Item purchased as seen." The prospective buyer must check the completeness of the item on site.