Used Thread Grinding Machine for sale (64,703)

Condition: reconditioned (used), Year of construction: 1970, functionality: fully functional, Table size 800 x 200 mm Magnet table 600 x 200 mm Grinding capacity 630 x 200 mm Max grinding high 320 mm Dia of grinding wheel max:250 mm Spindle speed 2750 rpm Power required 3,6 kW Weight 2200 kgs Dimensions L x W x H =: 1900 x 1500 x 2000 mm Dimensions of coolant tank L x W x H = 400 x 300 x 500 mm Dcsdow R Dnxopfx Afpjc

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, Table dimensions 405 x 815 mm Magnetic table 400 x 800 mm Table travel length/cross 830 / 450 mm Distance between spindle center and table surface 580 mm Grinding wheel dimensions 350 x 40 x 127 mm Motor power 4.0 kW Dcsdpfxoxlcmnj Afpjc Weight 3400 kgs Equipment, Accessories - Siemens PLC controller with touch screen - 2-axis digital readout system - Hardened and ground bed guides - Automatic infeed - Hydraulic oil tank cooler - Electric magnetic table with demagnetization - Flange-mounted grinding wheel - Built-in diamond dressing unit - Grinding wheel balancing stand - Balancing mandrel - Coolant system - Halogen lamp - Machine feet - Magnetic chip separator - Machine manuals The machine is in original condition and barely used (approx. 100-200 hours). No defects. It is being sold due to company closing.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, Completely overhauled by the original manufacturer's staff. Dcodpfx Afjychhtspsc Max. grinding diameter: 250 mm Grindable length: 750 mm Accessories: - Auxiliary hydraulic unit and control cabinet - Tailstock - Work spindle - Wet grinding attachment - Internal grinding unit - Balancing mandrel - Further accessories available upon request The machine is currently powered up and located in Hungary. An inspection is possible by appointment. The overhaul warranty is 6 months within Hungary.

Condition: reconditioned (used), functionality: fully functional, center height: 100 mm, workpiece weight (max.): 20 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, distance between centers: 400 mm, year of last overhaul: 2026, CHARACTERISTICS : Centre distance: 400 mm Center height: 100 mm Working feed Z axis: 100 - 3500 mm/min Orientation of table: 0 - 30 ° Grinding spindle motor power: 3 kW Max. diameter grinding wheel: 350 mm Max. grinding wheel width: 30 mm Grinding wheel bore: 127 mm Workpiece spindle nose: W20 Dcedpfxjycim Ds Afpec Workpiece spindle min. speed: 30 rpm Workpiece spindle max. speed: 1200 rpm Max part weight between centres: 20 Kg Workpiece swiveling range: 0 ° / +90 ° Workpiece spindle power: 0.5 kW Type of attachment tailstock: MT2 Tailstock quill stroke: 20 mm Machine dimensions: 2350 x 1480 mm Weight: 1600 Kg

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Dedpfow Uhrijx Afpocc Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Ready for production!

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Dodpfx Afjhq Uigepocc Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz

Condition: excellent (used), Year of construction: 1983, broušený průměr: 630 mm Dedpfx Aeyglurjfpocc délka broušení: 2000 mm výška středu: 315 mm kotouč průměr × otvor × šířka: 750 × 100 × 305 mm průměr brusného kotouče dle opotřebení: 610 mm výkyv v otevřené lunetě: 250 mm výkyv v uzavřené lunetě: 350 mm kužel otvoru vřetene obrobku: Morse 6 kužel zadního pinolu: Morse 6 průměr sklíčidla: cca 315 mm, 100 mm

Condition: excellent (used), Year of construction: 1961, Cylindrical Grinding Machine 3A164A Maximum workpiece diameter for mounting, mm: 400 Dsdpfx Ajya U Uzsfpecc Maximum workpiece length for mounting, mm: 2800 (2920)

Condition: used, Year of construction: 2006, gebraucht 2006 5539 prompt, Zwischenverkauf v Taiwan 55100 € 1 49600 € 1000 mm 850 mm 1000 x 610 mm 1000 x 600 mm 1000 mm 5 - 25 m/min 1250 mm/min 3 - 32 (0,02) mm 690 mm max. 400 mm/min mm 400 mm/min Dodpfxswiq Uks Afpocc 0.001 mm 1450 1/min 11 kW 3.7 kW 0.37 kW 20,6 kW 3700 mm 4000 mm 3250 mm 4800 x 2830 x 2800 mm 7400 kg 1500 kg 1120 kg 1500 kg 355 x 75 x 127 mm Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel withgrinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEEL

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Dcjdpeyhvu Eefx Afpoc Type of control: CNC Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50

Condition: like new (used), Year of construction: 2019, Horizontal surface grinder in almost new condition with few operating hours! Operating hours: see image PC control Okamoto Travel X-axis: 600 mm Travel Y-axis: 22.5 - 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: Dcsdpfeyhdquex Afpec - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system grinding length 600 mm grinding width 400 mm workpiece height 400 mm weight of the machine approx. 4,5 t dimensions of the machine approx. 3400 x 2647 x 2203 mm

Condition: used, Year of construction: 1988, functionality: fully functional, Gear Grinding Machine VEB ZSTZ 630 C 3 P – 1988, Ready to Operate Description: For sale: gear grinding machine from the German manufacturer VEB Werkzeugmaschinenkombinat, model ZSTZ 630 C 3 P, year of manufacture 1988. The machine is in good technical condition, available immediately, and ready for inspection. Currently connected to power, allowing immediate testing of its operation. Ideal for workshops specializing in precise gear machining and industrial machine repair. Specifications: Manufacturer: VEB Werkzeugmaschinenkombinat Model: ZSTZ 630 C 3 P Year of manufacture: 1988 Condition: good technical condition Dcsdsyfq E Hepfx Afpsc Availability: immediate Ready for inspection, connected to power Contact: Please contact us for inspection arrangements or further information.

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm Djdpfevbgr Rox Afpocc table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm Dcedevc Apbepfx Afpoc max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW Dcjdeu Ngk Topfx Afpoc dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: used, Year of construction: 1964, Technical details: shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. Dedsu Ngr Dopfx Afpjcc centering block: -prismatic guide accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder -div. clamping and auxiliary tools *

Condition: used, Technical details: grinding length: 1000 mm grinding width: 500 mm workpiece height: 500 mm table surface area: 1000 x 450 mm magnetic plate size: 1005 x 500 x 84 mm table speed: k.A. m/min table adjustment: längs: 1100 mm table adjustment: quer: 500 mm grinding spindle speed: 1420 - 2840 U/min grinding head vertical adjustable: 700 mm dimensions of grinding wheel: Ø 280 x 50 mm weight of the machine ca.: 2,7 t dimension machine xH: 3,1 x 2,0 x 2,4 m dimension coolant device LxWxH: 3,0 x 1,1 x 0,85 m dimensions of hydaulic: 750 x 600 x 850 mm dimension control panel: 0,65 x 0,85 x 1,3 m Equipment: Dressing device Holder for dial gauge Coolant filter system Hydraulic unit Manual control unit Dcedpfx Aovc Aw Esfpsc *

Condition: used, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390 mm table speed: 2,5-25 m/min table surface area: 250 x 1000 mm Dcedpfx Afeu Ngn Sepoc distance table - spindle center: 550 mm dimensions of grinding wheel: Ø max. 315 x 13-63 x Bohrung Ø 75 mm control voltage: 220 / 50Hz V/Hz total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 3,35 x 1,5 x 2,10 m Die Maschine befindet sich derzeit in der technischen Abteilung. *

Year of construction: 1971, condition: used, Technical details: Dedpsvc An Dsfx Afpjcc max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,9 x 2,5 m dimensions electric cabinet LxWxH: Nr. 1: 1,95 x 0,4 x 1,95 m dimensions electric cabinet LxWxH: Nr. 2: 0,8 x 0,23 x 1,95 m dimensions:: Abluftanlage: 1,4 x 0,7 x 0,55 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 69x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, Year of construction: 1976, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 400 mm table speed: 2 - 18 m/min magnetic plate size: 600 x 200 mm Max. Table-movement horizontal: 700 mm Max. Table-movement across: 230 mm table adjustment: Quervorschub: 0,1 - 2 mm/Hub ° table speed: 2 - 18 m/min dimensions of grinding wheel: max. Ø 200 x 20 x Ø 51 mm grinding spindle speed: 2800 U/min feed of spindle: vertical 0,01 total power requirement: 3,0 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,8 x 1,2 x 1,9 m dimension coolant device LxWxH: 0,8 x 0,4 x 0,2 m Currently there is a grinding wheel size Ø 160 x 18mm on the machine. There is a dressing device (without diamond) on the spindle. Dedpeu Ngl Dsfx Afpecc Magnetic clamping plate progress type FE 200/600; 220V / 110V coolant tank div. foot blocks Toothed rail 1000mm *

Condition: used, Year of construction: 1974, Technical details: grinding length: 600 mm grinding width: 200 mm Djdpfx Afou Ngmbopjcc workpiece height: 400 mm magnetic plate size: 630 x 200 mm Max. Table-movement horizontal: X-Richtung max. 710 mm Max. Table-movement across: Y-Richtung max, 250 mm table load capacity: 110 /1100N) kp table speed: 1,5 - 18 m/min dimensions of grinding wheel: max. 200 x 20 x Ø 51 mm grinding wheel dimensions:: gespannt: Ø 142 x 20mm grinding spindle speed: 2800 U/min feed of spindle: 0,01 mm total power requirement: 5,0 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,8 x 1,2 x 1,9 m dimensions: Behälter Absaugung: 420 x Ø 350 x 680 mm The machine was used for dry grinding. -very good condition -without dressing device -dust extraction -machine lamp *

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Dcsdpsu Ngrqsfx Afpsc Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,1 x 1,0 x 1,7 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Dcodpeu Ng Irefx Afpoc Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Dcjdpju Ngxdofx Afpjc Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Dcodpfx Ajvc Aw Ssfpsc Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine xH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device *