Used Tools Drawer for sale (37,815)

Condition: good (used), Offer 23252 Technical data: - 9 pieces of 100% extractable drawers on roller bearings. - filled with measuring tools, gauges, inserts etc. - drawer size each approx. W 620 x D 630 mm - Drawer heights 2 x H 35 mm - 3 x H 55 , 1 x H 75 , 1 x H 55 , 1 x H 155 , 1 x H 215 mm Bjdjnmx Uiopfx Abzjww - Drawers with roll stop when one drawer is open. - no key available - space requirement approx. W 720 x D 730 x H 1120 mm - weight approx. 400 kg

Condition: used, details on request Bwsdpfx Ajdbmyzsbzjw

Condition: good (used), N2 Clamping Squares made of G25 cast iron with a lamellar structure. Bsdpfjtyyl Esx Abzeww With a vertical plane, machined either with T-slots or zero point, orthogonal to the support base according to DIN 875 standard, DIMENSIONS 1595x1000x850mm milled to DIN 876/II, with T-slots 22H12 DIN 650 at a pitch of 175mm

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks. Bsdpfx Aodzqmzebzsww

Year of construction: 1988, condition: used, diameter different mm weight 200 kg Type different 0 Bwodpfxsipyybo Abzsw 14 pieces arbors for milling tools and 4 steadies, 2 for FU 400 (84 mm hole dia.), 1 for FU 315 (70 mm hole dia.) and one small one (35 mm hole dia.).

Condition: good (used), Various press brake tools, punches, dies Bwedpfx Abow Emf Dezow Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Offer 35511 Technical specifications: - 8 ball bearing drawers, 90% extendable - Drawer size: approx. W 1010 x D 650 mm - Drawer heights: 2 x H 55 mm; 3 x H 80 mm; 3 x H 130 mm Bwedpfx Aoxdi A Hsbzew - No key available - Cabinet space requirement: approx. W 1120 x D 780 x H 1000 mm - Weight: approx. 80 kg

Condition: used, Complete price for all existing tooling in total approx. 180 tools - exact listing on request. KELCH drill holder for insert drill SK 50 X 32 X 100 intermediate sleeve for SK with extraction thread SK 50 X SK 40 X 40 Bwedpfx Aof Hndujbzjw Intermediate sleeve for MK with extraction flap SK 50 X MK 4 X 95 KELCH Intermediate sleeve for MK with extraction thread SK 50 X MK 1 X 45 MAZAK intermediate sleeve for MK with extraction thread SK 50 X MK 3 X 69 KELCH intermediate sleeve for SK with pull-out thread SK 50 X SK 40 X 70 MAZAK drill holder SK 50 X 32 X 100 Chuck for collet SK 50-2/20-160 KELCH slip-on cutter arbor SK 50 X 50 X 60 KELCH arbor for arbor SK 50 X 50 X 40

Condition: good (used), Each dimension of the cutting maschine will only be sold in a set of 2. Bsdsgzpanjpfx Abzoww

Condition: excellent (used), functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 1.5m LNS bar feeder Control: Mori Seiki MF-T6 Tool holders: (2) Radial live tolls (2) Axial live tools (4) inside tool holders (4) outside tool holders Swing over bed: 815 mm (32.1″) Swing over cross slide: 620 mm (24.4″) Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM) Bwsdpfx Abjw Ett Ijzjw   Z-axis: 15,000 mm/min (590.6 IPM)   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Coolant tank capacity: 100 liters (26.4 gal) Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs)

Condition: ready for operation (used), Various wood milling tools are available for a Homag DEP. Spindle diameter: 35mm/50mm, tools: cutter set for longitudinal machining/replacement knives/milling tools. Documentation available. On-site inspection is possible. Bedpfx Absufqfqszoww

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Handover: in current condition as viewed -Cabinet door: one side missing -Tool cabinet. Drawer cabinet, sturdy design -8 drawers: division/height see photos -Dimensions: W 720/550/H 1020 mm Bsdpfowx Eb Djx Abzsww -Weight: 111 kg

Condition: good (used), Offer 22142 Technical data: - 9 ball-bearing extendable drawers - Drawer size approx. W 600 x D 600 mm - Drawer heights: 2 x H 35, 2 x H 50, 3 x H 75, 1 x H 270 mm - 5 upper drawers with 90% extension - 4 lower drawers with 100% extension - Required space approx. W 720 x D 730 x H 1120 mm - Weight approx. 100 kg Bwsdpfjwx Ikhsx Abzjw

Condition: used, Article: clamping collets Manufacturer: Different Bsdpfx Abjn H Nzbjzsww For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design Bsdpfxowxti Ns Abzsww -8 drawers: division/height see photos -lockable: without key -Dimensions: W 525/700/H 850 mm -Weight: 110 kg

Condition: used, Offer 35504 Bwsdpfxewzvlfo Abzsw Technical data: - 7 pieces of ball-bearing drawers, each 90% extendable - Drawer size approx.: W 510 x D 600 mm each - Drawer heights: 1 x H 85 mm; 1 x H 65 mm; 5 x H 125 mm - No key available - Required cabinet space approx.: W 650 x D 700 x H 1020 mm - Weight: 80 kg

Condition: used, Article: feed tube Manufacturer: Schütte For multi spindle automatic lathes of different sizes Bwsdpfxovvhtfs Abzjw Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, machine/vehicle number: xxxx, Technical data: - 7 roller-bearing pull-out drawers Bwedswwkhmspfx Abzjw - Drawer extension: 80 % - Drawer size approx.: W 700 x D 610 mm - Drawer heights: - 2x H 50 mm - 3x H 80 mm - 1x H 180 mm - 1x H 220 mm - Required space approx.: W 800 x D 700 x H 1000 mm - Weight approx.: 100 kg - Key available

Condition: used, Article: feed finger Manufacturer: Different Bodpfx Asn H Nzqsbzeww Conventional feed finger and collets of RS-system For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Article: clamping tube Bwedpfx Aevvhl Isbzjw Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Bedpfon H Nzuex Abzjww Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Worm wheels and worm shafts for Schutte multi spindle automatic lathe, used Different sizes available Bwjdpfx Abjvt Twwezjw Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Fette thread rolling unit T42, cross Please, contact us for getting more informations and pictures on or Bwodpfx Absft Tk Hjzsw *

Condition: used, Article: cam Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or Bwjdpfxjn H Nzfe Abzjw *

Condition: used, Article: pick-off collets Manufacturer: Different Bsdpjn H Nziofx Abzsww For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *