Used Transfer Press for sale (15,292)

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Rsdpfx Ashga Srobhow Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Rodpfjzh Uziex Abhsw Empty pallet supply for loading • Capacity approx. 12 pallets • Stacking height max. 1,800 mm

Condition: used, Year of construction: 2023, Press brake Type/Model: Dener PX 60320 Condition: Used Year of manufacture: 2023 Technical data: Rjdpfx Abszhmnuohow Main data and dimensions Press force: 3200 kN / 320 tons Bending length: 6,050 mm Distance between uprights: approx. 5,100 mm Stroke of the press beam: 350 mm Installation height: 650 mm Overhang in the side upright: 450 mm Hydraulic and drive system Main motor (power): 30 kW Hydraulic components from HAWE-Hydraulik or Bosch Rexroth Oil tank capacity: approx. 550 l Speeds Approach speed (Y-axis): up to 160 mm/s Working speed (bending phase): 10 mm/s Control and axes (standard equipment) CNC control: Standard with an ESA S 640 2D Standard axis configuration: 4 axes (Y1, Y2, X, R) Y1 / Y2: Independent hydraulic control of the two cylinders for precise parallelism X-axis (back gauge): Forward/backward movement (stroke usually 650 mm or 1000 mm) R-axis (back gauge): Height adjustment of the back gauge fingers Crowning: Integrated, CNC-controlled motorized table crowning for automatic compensation of deflection over the entire 6-meter length Weight and foundation Total machine weight: approx. 28,500 kg

Condition: used, Year of construction: 1993, Location: Malta Presona LP 50 VH Hydraulic Baler Presona LP 50 VH fully automatic horizontal hydraulic baler available for sale. The machine includes a hydraulic power unit, an automatic wire tying system, PLC controls, a pre-press and main press assembly. Suitable for OCC, paper, plastics, and industrial recyclables. Conveyor system not included. Sale Includes: Presona LP 50 VH horizontal baler Hydraulic unit Main press system Pre-press system Friction channel Automatic wire tying system Needle assembly PLC control system Hydraulic power pack Electrical control cabinet Bale ejection system Not Included: Conveyor system Machine Overview Main Technical Specifications Specification Details Manufacturer: Presona AB Model: LP 50 VH Machine Type: Fully Automatic Horizontal Hydraulic Baler Maximum Hydraulic Pressure: 25 MPa Press Force: 500 kN Power Supply: 220–600V AC, 3 Phase Control Voltage: 24V DC PLC Bale Weight: Up to approx. 800 kg Strapping: Automatic Multi-Wire Tying Operation: Continuous Automatic Operation Materials Suitable for Baling: OCC / cardboard, Waste paper, Newspapers & magazines, Plastics, Packaging waste, General recyclable materials Main Features: Hydraulic Pressing System Heavy-duty hydraulic main press Hydraulic pre-press system Adjustable friction channel pressure Continuous compaction operation Automatic Wire Tying Fully automatic multi-wire tying Hydraulic needle assembly Wire twisting and cutting system PLC Controlled Automatic operating cycles Rjdpezhpa Tjfx Abhew Error monitoring system Programmable material settings One-man operation capability Hydraulic Unit: The hydraulic system includes: Hydraulic pumps Oil tank Pressure regulation valves Oil filters Pressure transmitter Oil temperature monitoring Optional systems mentioned in the manual: Oil cooler Oil pre-heater Remote display Automatic Bale Tying System: The LP 50 VH features: Hydraulic needle assembly Automatic wire feeding Automatic twisting and cutting Multi-wire bale securing system Ideal Applications: Recycling facilities Waste transfer stations Cardboard recycling operations Plastic recycling plants Industrial waste processing Distribution & logistics centres Storage location: Customer

Condition: good (used), Year of construction: 2004, machine/vehicle number: H7761, functionality: fully functional, operating hours: 9,655 h, power: 380 kW (516.66 HP), input voltage: 500 V, input current: 530 A, input frequency: 50 Hz, stroke length: 1,650 mm, operating speed: 68 mm/s, total length: 7,000 mm, total width: 5,000 mm, total height: 6,000 mm, overall weight: 2,88,000 kg, SCHULER SHC 1000 Hydraulic Press/Industrial Robot Rodpfx Aszhuf Uebhsw - Nominal force: 1000 kN - Maximum stroke: 1650 mm - Installation height: 2400 mm - Closing speed: 420 mm/s - Working speed: max. 68 mm/s - Working speed at nominal force: 21 mm/s - Tool base area: max. 3900 x 2400 mm - Tool base area: min. 1800 x 1200 mm - Tool height: min. 750 mm - Maximum total tool weight: 50,000 kg - Tool upper part weight: max. 25,000 kg - Permissible load left/right: 800 kNm - Permissible load front/rear: 400 kNm - Includes industrial robot from the manufacturer KUKA, year of manufacture: 2002 - Control system: SCHULER Collection: upon request FCA D-73033 Göppingen - loaded onto a truck

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW Rodpfjrk Sg Rsx Abhjw CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm Rjdoxn U Rqspfx Abhsw TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 BENDING LENGTH: 3150 mm TONNAGE: 70 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2640 mm OPEN HEIGHT: 450 mm Rjdperk Shcefx Abhew APPROACH SPEED: 160 mm/sec RETURN SPEED: 160 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 7800 Kg OVERALL DIMENSIONS: 3400 x 2100 x 2650 mm

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 3130 mm TONNAGE: 80 ton THROAT DEPTH: 405 mm Rjdpfxjmyc I Nj Abhow DISTANCE BETWEEN UPRIGHTS: 2700 mm OPEN HEIGHT: 350 mm UPPER BEAM TRAVEL: 150 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 96 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 5,5 kW CONTROL UNIT: TASK 84 SIRIO 2 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 4000 x 1700 x 2400 mm

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm Rsdpfxotq Ngbs Abhjw X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: name: eccentric press SCHULER model: PD 63 press force: 63t press dimensions L x W x H: 1800X1300X2500mm weight of the press: approximately 4500 kg table dimensions LxW: 700x550mm table opening LxW: 265X265mm slide LxW: 320x300mm slide stroke: 135mm (fixed) max distance of the slide from the table: 400mm PLC components: SIEMENS SIMATIC S7-300 pneumatic components: FESTO commands: single (foot pedal, two-hand control), continuous (automatic mode - setting the time interval 1-99999s and the number of repetitions 1-32000) a special function for determining the lower position of the slide automatic machine lubrication pneumatic activation and braking. Redpfxjw R Tl Tj Abhsw Note: two identical presses are offered (the only difference is in the size of the display, 7" and 4.3"). If you buy both presses, the price will be 8000 EUR. Technical documentation is not available. Online assistance from a programmer for PLC programming is possible. The shipping price is an additional cost. Urgent sale, I need more space for new equipment. The price is absolutely fixed; after March 1st, they will be disconnected from the electricity supply.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-wire, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. The operating manual is available. Redszh Iigopfx Abhsw Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, sale is subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Rjdsy S E U Rjpfx Abhow Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Original technical documentation and schematics

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Rsdpsvviytofx Abhew Storage location: Nattheim

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Rjdpfx Abovvkmbehsw

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Rodpjvvkl Dofx Abhjw Storage location: Nattheim

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 Rjdpfx Abst Eq E Sjhow 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: ready for operation (used), Year of construction: 1969, Spindle bore diameter: 80 mm Bore: 15 mm Rodpfx Aezh Ibpjbhew Stroke: approx. 550 mm Overhang: 250 mm Table size: 300 x 370 mm Table cut-out: 85 mm Space requirement: 1000 x 800 x 2000 mm

Condition: new, pressing force: 100 t, Equipment: CE marking, Offer: "The All-rounder" For economical bending with premium features: 4-axis back gauge (expandable to 5 axes), BendGuard safety system, ACB Laser angle measurement system, bending aid, and efficient on-demand hydraulic drive. The images shown are examples and may not reflect the standard scope of the offer. For offer details and further information, please contact us. About the machine: Do you need a reliable bending machine that delivers premium quality even with a limited budget? Then the TruBend 3000 is the ideal solution for you. The focus here is on what really matters: economy, stable processes, the highest precision, and proven TRUMPF safety standards. With its robust system design, intelligent premium features, and consistently stable operation, the TruBend Series 3000 offers optimal conditions for productive manufacturing. It is ideal for complex bent parts in small and medium batch sizes – even under economic pressure. Precise bending – The ACB Laser angle measurement system automatically ensures precise angles with ±0.3° accuracy. Productive work – The on-demand hydraulic system and intelligent bending aid increase your productivity and noticeably reduce the workload on your team. Rodpfx Abjzhu Amjhow Flexible programming – With TRUMPF Software TecZone Bend, you can program offline, and the machine continues to produce in parallel. TRUMPF Service – Bending tools, training, and technical support – we support you worldwide. With us, you get more than just a machine: a complete ecosystem that optimally supports your bending production. Further technical data can be found in the data sheet or on our website. If you have any questions, please contact us. P.S.: With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we also support you in overcoming financial challenges.

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Rodpjyw Aa Ijfx Abhow - Capacity: 1,500 kg/h (apples) - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems

Condition: not inspected (used), functionality: limited functionality, Promecam Press Brake 100 t / 2,000 mm – Uninspected For sale is a used Promecam press brake with a pressing force of 100 tons and a working length of 2,000 mm. The machine is sold as is, without inspection, commissioning, or any guarantees regarding its current condition. Technical Data Manufacturer: Promecam Pressing force: 100 t Working length: 2,000 mm Operating voltage: 400 V Hydraulic drive MB control Manual and automatic operating modes X, Y, and R axes Condition The machine is in used condition, with normal signs of wear and tear consistent with its age. The following functions have been verified: Control starts Hydraulic pump runs X-axis moves Redpfjzhx E Sox Abhjw Known defects: Y-axis is currently not functioning R-axis is currently not functioning Further functional testing or adjustment has not been performed. Scope of supply Machine as shown in the picture No tools included

Condition: used, Year of construction: 2021, Overview This belt press was manufactured in 2021 by Germany AMOS INDUSTRIE. The machine is designed for fruit juice processing. It is still installed and can be visited in production on request.  Technical data  Redpfozh Il Iex Abhsw - Capacity: 1,200 kg/hour - Application: Fruit juice - Configuration: Belt press - Operating hours: 200

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed clearance: 120 ± 40 mm Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Rjdpfx Aezhw Huebhow Thickness: 0 – 4 mm Drive power: 21.5 kW Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: used, machine/vehicle number: 008212, Max working length: 4000 mm Rjdpfxoy Nkrio Abhsw Max working width: 1400 mm No of Pressing cylinders: 10

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Redpfx Abozhc H Hohow Equipment and technical data: - Press length: max. 2500 mm - Press height: max. 1350 mm - Working depth: max. 600 mm - Pressing time: adjustable - Vertical and horizontal press beams are moved electromechanically and interlock with each other - Pressure build-up via frequency-controlled geared motors - Pressing pressure can be adjusted separately vertically and horizontally - Dimensions: approx. 370 x 100 x 225 cm - Weight: approx. 2,100 kg Availability: short notice Location: 63934 Röllbach