Used Trumpf Tkf 100 for sale (384)

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping Gbjdpfx Aaou T Nknobou - Die table displacement pneumatically supported

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Gbjdow Suwyjpfx Aabju Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: excellent (used), Year of construction: 2014, 6kW resonator Annual maintenance by Trumpf Gedpfjwd Ng Iox Aabobu

Year of construction: 2008, condition: ready for operation (used), Punching force: 220kN, working range combined operation X/Y: 2585mm/1650mm, working range punching operation: 3085mm/1740mm, working range laser operation X/Y: 3085mm/1650mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 230kg. Positioning speed: 109m/min, max. stroke rate: 900 strokes/min, max. marking rate: 2800 strokes/min, tool positions: 18, accuracy: +/-0.1mm. Machine dimensions X/Y/Z: approx. 8000mm/9000mm/2500mm, weight: approx. 22500kg. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Gjdpfx Aaoxddagobsbu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 5,000 W, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 2,400 kg, TECHNICAL DETAILS Travel Distances X-axis travel: 6000 mm Y-axis travel: 2000 mm Z-axis travel: 115 mm Laser power: 5,000 W Maximum workpiece weight: 2,400 kg Maximum positioning speed parallel/simultaneous X-axis: 200 m/min Maximum positioning speed parallel/simultaneous Y-axis: 282 m/min MACHINE DETAILS Laser type: CO2 TLF 5000 Electrical connection: 105 kVA / 400 W (± 10%) / 50 Hz (± 1%) / 3-phase / 160 A Gas consumption CO2: 1 l/h Gas consumption N2: 6 l/h Gas consumption He: 13 l/h EQUIPMENT - Automatic pallet changer - Longitudinal belt conveyor - PlasmaLine-PMS (Plasma Monitoring System) - SprintLine - Blasting - Gas flushing - Immersion - Marking - ContourLine - AutoLas Plus - PierceLine Gbedpfx Aaexbfn Tsbeu Note: The LiftMaster is not included in the scope of sale and delivery.

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting CE marking Motor power: 30 kW Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Safety device BendGuard Network capability Support arm with height adjustment Condition: Overall in very good condition Gbjdpfx Aoxdt U Hjabou Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h Gjdpfx Aowm I H Soabobu - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: good (used), functionality: fully functional, Year of construction: 1997, operating hours: 19,891 h, machine/vehicle number: 885170, control type: CNC control, controller manufacturer: Delem, bending force (max.): 130 t, working width: 3,050 mm, stroke length: 365 mm, throat depth: 410 mm, distance between stands: 2,700 mm, installation height: 535 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, number of axes: 4, table height: 970 mm, type of crowning: CNC-controlled, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 260 mm, overall weight: 12,950 kg, total length: 3,600 mm, total width: 2,250 mm, total height: 3,000 mm, power: 12.5 kW (17.00 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Technical data: - Max. working length: 3050 mm - Frame opening: 2700 mm - Max. pressing force: 1300 kN - Throat depth: 410 mm - Ram stroke: 365 mm - Pneumatic connection: 6 bar - Space requirement approx. W 3800 x H 2900 x D 2400 mm - Weight approx. 13,000 kg Gbodpfxoxdhk Ao Aabeu - 4-axis CNC control DELEM - Two-hand control panel with 2 foot switches - Crowning device - Controlled back gauge with height adjustment - Hydraulic upper and lower tool clamping - Die table movement pneumatically assisted - Indicated operating hours: 19,891 h - Hydraulic tool clamping top and bottom - Program-controlled lower tool displacement (I-axis) for 2 positions

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 39,500 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Gbsdpfx Aeulqrleabsu - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Year of construction: 2008, operating hours: 23,749 h, condition: ready for operation (used), Main Drive Laser power 5000 W Number of axis 3 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Gsdpfx Aajxa H Tbsbebu Workpiece weight 900 kg This 3-axis TRUMPF Trulaser 5030 was manufactured in 2008. It features a robust 5000W laser and can handle sheet metal up to 25mm thick. With a maximum working area of 3000mm x 1500mm and speeds up to 300m/min, it's ideal for high-speed cutting. Consider the opportunity to buy this TRUMPF Trulaser 5030 fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Year of construction: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667 Technical parameters:- Designation: KNC/H 1500/65- Maximum temperature: 650 °C- Recommended operating temperature range: 300°C – 600°C- External dimensions approx. (wxhxd): 2800x3200*x2100mm * height including structure for door when hydraulically opening- Internal dimensions (wxhxd): 1500 x 1000 x 1000 mm- Number of heating zones: 1- Maximum batch weight: 1000 kg- Melting power: 48 kW- Furnace weight: 1300 approx. kg- Voltage: 3/PEN 400/230V AC 50 Hz- The damper is part of the furnace, serves for automatic temperature control in the furnace and is controlled by the program from the controller. - includes technical documentation in Slovak - protocol of measurement and Gsdpfx Asvtm Szsabjbu optimization of the temperature field to meet the DIN 17052-1 standard ΔT10°C in the internal working space (in an empty furnace at Tmax) \- Technical documentation is in SJ. Manufacturer: LAC, s.r.o., Czech Republic Year of Production: 2021 This is an electric furnace, the heating system of which consists of heating resistance elements located near the fan unit. Through the heating branches, the fan ensures circulation of the atmosphere in the heating space and thus heating of the working atmosphere and the charge in the furnace. The working chamber of the furnace is equipped with a separately regulated heating unit in the rear wall of the furnace. The furnace is equipped with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the working space of the furnace. The circulation fan drives the heated air through the circulation channels of the circulation insert. All rotating parts are located under a cover against accidental contact. The temperature profile of the device is controlled by a PID programmable INDUSTRY controller. This controller allows the creation of up to 30 heat treatment programs depending on the needs of the processing technology and the properties of the processed batch. Dimensions see. appendix.

Year of construction: 2001, condition: excellent (used), Make: Trump card Type: TRUMATIC 2000R Year of construction: 2001 Work area: 1270 x 1270 mm Punching power: 18 to Maximum sheet thickness: 6,4 mm Maximum workpiece weight: 75 kg Gsdpsdyn Riofx Aabjbu Maximum punching diameter: 76 mm Max speed: 90/60/108 m / min Accuracy: +/-0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, very good condition, just thin sheets

Condition: used, functionality: unexamined, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: CO₂ laser, laser source manufacturer: Trumpf TruFlow 3200, laser hours: 35,623 h, laser power: 3,200 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 200 m/min, feed rate Z-axis: 80 m/min, cutting speed: 140 mm/min, positioning speed: 140 m/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 3.2 kW (4.35 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: DC, type of cooling: water, overall weight: 12,000 kg, total length: 6,500 mm, total width: 7,600 mm, total height: 2,200 mm, year of last overhaul: 2023, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The machine was covered by a maintenance contract with Trumpf until 2023 and was serviced exclusively by Trumpf! Technical Data: - Laser power: 3,200 watts (3.2 kW) CO2 laser source (TruFlow 3200) - Operating hours: NC control: 35,623 hours Resonator / Pump 1: 34,258 hours Beam On / Pump 2: 10,155 hours - Working area (X/Y/Z): 3000 mm x 1500 mm x 115 mm - Maximum sheet thickness: Mild steel: up to 20 mm Stainless steel: up to 12 mm Aluminium: up to 8 mm - Feed rates: X-axis: 3000 mm/min Y-axis: 1500 mm/min Z-axis: 115 mm/min - Positioning speed X/Y: 140 m/min - Smallest programmable increment: 0.001 mm Gbjdpfexc E Rqjx Aabeu CNC control: Siemens SINUMERIK 840D SL

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 2001, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: 840D, laser power: 2,700 W, overall weight: 18,000 kg, It was working before the move. The move was not fully implemented. Godpfxew S Il Dj Aabsbu

Condition: used, functionality: unexamined, Used TRUMPF CS 75 Punching Machine for Sale For sale is a robust and well-maintained TRUMPF CS 75 punching machine – ideal for industrial metalworking applications. Technical specifications: Model: TRUMPF CS 75 Punching force: 75 kN (7.5 MPa) Type number: 8206 Machine number: 1129 Connection: 380 V / 50 Hz / 5.3 kVA Compressed air connection: 6 bar Motor (Himmel Tübingen): 3~ 220/380 V 8 kW, 25 A 615 Nm torque Gbjdpfjxb Aytsx Aabou 600 rpm Condition: Used Many tools included. Operating manual included.

Year of construction: 2001, condition: ready for operation (used), Main Drive Number of axis 5 Additional Equipment Gedpfx Asw Nb Ndsabobu Top drive concept in two-cylinder design y1/y2 Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Cnc backgauge system Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover Main Drive Number of axis 5 Additional Equipment Top drive concept in two-cylinder design y1/y2 Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Cnc backgauge system Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Year of construction: 2007, condition: good (used), TRUMPF TruFlow 3200 Trulaser 3030 (2007) Type of Current - 50 Hz Voltage - 400 V Gbsdpfx Aovq Nngeabju Rated power - 73 kVA Control voltage - DC 24 V Year of manufacture - 2007-08-15

Condition: used, Unique opportunity: We are clearing out our stock of Trumpf tools (multitools 4-position and 6-position, thread formers, number and letter tools). IMPORTANT: All tools are only compatible with TC 240, TC 260, TC 500, and TC 600 series machines. They are NOT suitable for the Trumpf 1000 series. The original purchase price was approximately €80,000 – €90,000. SPECIAL PRICE when purchasing the entire lot: €5,000 net. Hello Mr. Fuquene, I have taken additional photographs of all the tools for you. The price is a special flat rate for the complete set; the original price of these tools is around €85,000 – €90,000. Gbodpfexcmpusx Aabou Tool list: - 14 pcs. 6-position multitools - 70 pcs. 6-position die holders - 7 pcs. 4-position multitools - 32 pcs. 4-position die holders - 2 boxes of spare parts for the multitools, punches, dies - 2 pcs. thread formers - 1 pc. number tool - 1 pc. letter tool If you have any questions, please do not hesitate to contact me.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 35,000 h, machine/vehicle number: A0220A1791, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, laser type: CO₂ laser, laser hours: 13,700 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 150 mm, Equipment: CE marking, centralized greasing system, documentation/manual, Trumpf Trulaser L3030 2KW. Year of manufacture 2007. The machine is still operational. Gjdpfexcxucex Aabobu

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Press force 130 t Bending length 3200 mm Distance between uprights 2690 mm Stroke max. 445 mm Gedpfx Aow Nn Rhsabsbu Operating hours approx. 49,794 h Total power requirement 24 kW Machine weight approx. 10,900 kg

Year of construction: 2009, condition: ready for operation (used), Laser power: 4kW, working area X/Y/Z: 4000mm/2000mm/115mm, max. sheet thickness mild steel/stainless steel/aluminium: 20mm/15mm/10mm, max. workpiece weight: 1700kg. Machine dimensions X/Y/Z: approx. 11600mm/5300mm/2200mm, weight: approx. 15000kg. Includes Trumpf Liftmaster. Documentation available. An on-site inspection is possible. Gjdsxbhgxspfx Aabsbu

Condition: good (used), functionality: fully functional, Year of construction: 2011, Electromechanical press brake Bending length up to 1020 mm Frame gap 932 mm Max. press force 360 kN Max. stroke 120 mm Throat depth 150 mm Serviced by TruServices (last 2/2025) Weight 2600 kg Gsdpfx Aaoxbbw Debsbu

Condition: like new (used), For sale is a TRUMPF TruBend 5130, regarded worldwide as the benchmark for productivity and precision in sheet metal processing. Whether for single pieces or series production, this press brake impresses with its intelligent technology, simple operation, and maximum reliability. 🔧 Technical data (excerpt): • Press force: 130 t • Bending length: 3,230 mm • Control: CNC Touchpoint TruTops Control • Backgauge: 6-axis (optionally up to 8-axis) • Equipment: angle measuring system, bending assistant, quick tool change, safety laser system ✨ Special features: • Extremely precise bending thanks to ACB angle measurement • High energy efficiency due to on-demand drive • Ergonomic operation with intuitive touch display • Ideal for thin to thick sheet metal Gbedpswu Tnqsfx Aabsu

Year of construction: 2009, condition: ready for operation (used), Pressing force: 2300kN, bending length: 3230mm, ram stroke: 445mm, installation height: 615mm, distance between uprights: 2690mm, throat depth: 420mm, closing speed: 220mm/s, operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/3200mm, weight: approx. 19200kg, operating hours: approx. 26830h. Documentation available. An on-site inspection is possible. Godpfxexbhg Eo Aabobu

Year of construction: 2012, condition: ready for operation (used), Pressing force: 1700kN, bending length: 3230mm, ram stroke: 445mm, installation height: 615mm, distance between uprights: 2690mm, throat depth: 420mm, closing speed: 220mm/s, operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5250mm/2000mm/3000mm, weight: approx. 16000kg, operating hours: approx. 19133h. Documentation available. An on-site inspection is possible. Gbjdoxbhg Sjpfx Aabju