Used Universal Machine for sale (64,709)

Condition: used, Year of construction: 1991, Technical details: x-travel: 1050 mm y-travel: 600 mm z-travel: 650 mm range of revolution per miute: 40 - 1720 / 12 step U/min Codpfx Aeva Hd Rjfpspu spindle taper: SK 50 spindle head swivable left - right: 90° re/li und 45° = 360° ° distance spindle nose and table: 0 - 600 mm table surface area: 1700 x 470 mm feed continuous: X/Y= 15 - 625 + Z= 7,5 - 312 mm rapid traverse Z-axis: 1250 mm/min. rapid traverse:: X/Y: 2500 mm/min. total power requirement: 11,1 kW weight of the machine ca.: 2500 kg machine dimensions LxWxH: ca. 2,45 x 2,0 x 2,85 m Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Machine vice (jaw width 120mm) *

Condition: used, Technical details: x-travel: 700 mm y-travel: 250 mm z-travel: 200 mm spindle taper ISO: SK40 Cedpova Hfhsfx Afpepu range of revolution per miute: Spindel 32 - 2000 / 18 step U/min spindle head swivable left - right: 90 ° table surface area: 1000x400 mm weight approx.: k.A. kg dimension machine xH: 1,6 x 1,2 x 1,9 m with vise *

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems Cpjdsu Nc Rijpfx Afpsu the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: Csdpfxsu Nc U Ie Afpspu - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Codpfxou T Navs Afpspu Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Technical details: balancing body max.: 800 kg balancing body diameter: 1250 mm Balancing revolution per minute: 190 - 3600 U/min bed length: 2600 mm voltage: 380 V/Hz drive power: 7,5 kw Weight approx.: 1,5 t dimension machine xH: 3,5 x 1,7 x 2,0 m dimensions electric cabinet: B:650 x T:250xH:800 mm Horizontal balancing machine Codpfou Upp Tjx Afpspu The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission by means of cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm Measured speed: 1st gear = 190 - 650 rpm. 2nd gear = 400 - 1250 rpm 3rd gear = 700 - 2100 rpm. 4th gear = 1200 - 3600 rpm. 2 pick-up blocks whose displacement is manual over the entire bed Schenk measuring device with digital display and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask! *

Condition: used, Technical details: Cpjdpfeu Nc R Nex Afpju x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. *

Condition: used, Year of construction: 1975, Technical details: Cpjdpfxjvc Avus Afpsu x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm Cedpfx Afou Idbyspjpu tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, Technical details: x-travel: 200 mm y-travel: 450 mm Cjdpfx Afou Ndcaepepu z-travel: 460 mm control: Siemens 802S base line spindle taper ISO: ER 32 spindle head swivable left - right: nein ° turning speed range: 150 - 8600 U/min feed:: X/Y/Z: 2000 - stufenlos mm/min table surface area: 750 x 210 mm interface: 232 total power requirement: 3 kVA weight approx.: 760 kg dimension machine xH: 1,9 x 1,2 x 2,1 m Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control unit cooling system central lubrication machine interior lighting Machine feet *

Condition: used, Year of construction: 1998, Technical details: x-travel: 820 mm y-travel: 280 mm z-travel: 410 mm spindle taper ISO: SK 40 distance table/horizontal spindle: min. 30 / max. 440 mm cross rail adjustment - horizontal: 650 mm range of revolution per miute: 40...2000 / 18step U/min swival range +/-: bei 90°: 360° und bei 45°: 360° Grad clamping surface area: 1120 x 250 mm table swivable approx.: 45° rechts / links feed:: X/Y: 12,5 - 830 + Z: 5,2 - 260 mm/min rapid traverse: X/Y: 2500 und Z: 1040 mm/min. total power requirement: 10 kW machine weight approx.: 2000 kg dimension machine xH: 2,2 x 1,8 x 1,7 m Codpfx Asva Ei Sjfpjpu Ausstattung: 2x Gegenlager Ø 55mm Kühleinrichtung: Pumpe und Zuführung Bedienung über 3-Wege Messsystem ACU-Ride und Bedientafel Maschinenfüße *

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW Cpodpfx Afsvc Awfjpeu machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Optional accessories *

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle Codpfx Ajxhg Disfpspu - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Cpedpfx Ajyg Dk Ssfpsu Travel: X 300 / Y 200 / Z 350 mm Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, DMG CMX 50 Cpsdpfxsyg Nqkj Afpeu Year of manufacture: 2023 Spindle hours: approx. 1,300 h Spindle: 15,000 rpm inlineMASTER Tool holder: SK40 Tool stations: 30 slots Control: Siemens 840D sl X travel: 500 mm Y travel: 450 mm Z travel: 400 mm Weight: 4,700 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 4501, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotational speed (min.): 6,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Machine configuration: Cpsdpeygtqbjfx Afpou • UniSpeed3500 • Central chip conveyor • Control panel for side and front operation • Platform • Padded seat • Rotoclear side viewing window • 3-color signal lamp • Main drive up to 6,000 rpm • Tool holder SK 50 BigPlus • Orthogonal milling head (C-axis 0.01°, A-axis 0.01°) • Siemens Sinumerik One • HT2 handheld operating device • Rotary table Ø 1,600 mm, 8 t • Side milling table segments • ToolRunner for 90 tools • Coolant system 950 l • Coolant pump 40 bar / 32 l/min • Coolant-to-air switching • Wash gun in working area • m&h wireless probe • 1-channel collision monitoring system • Operating mode 3 • Air purification system 4,000 m³/h

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010407, travel distance X-axis: 320 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 320 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 40,000 rpm, TECHNICAL DETAILS Travel distance X-axis: 320 mm Travel distance Y-axis: 320 mm Travel distance Z-axis: 320 mm Number of axes (simultaneous): 5 Max. spindle speed: 40,000 rpm Max. workpiece length: 150 mm Max. workpiece width: 150 mm Max. workpiece height: 150 mm Max. workpiece weight on table: 20 kg A-axis: 360° B-axis swivel range: +/- 115° Number of tools in tool changer: 60 Tool holder: ISO V 30 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Connection: 50 Hz 3x 400 Volt Spindle motor: 11 kW Codpfjyhnygjx Afpjpu Total power consumption: 35 kW Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,400 x 2,900 mm Machine weight: approx. 6,000 kg EQUIPMENT Set of tool holders Coolant unit Chip conveyor Lighting Coolant/mist extraction Switch cabinet air conditioning Status indicator lamp

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Cpodpfxsyhnxve Afpeu Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2004, operating hours: 7,266 h, functionality: fully functional, machine/vehicle number: 10932-16, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 300 mm, controller model: Roeders RMS6, spindle speed (max.): 42,000 rpm, The machine spindle was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 500 mm Travel Z-axis: 300 mm Number of simultaneous axes: 5 Cpodpfxoyhnu Rj Afpou Max. spindle speed: 42,000 rpm Number of tool pockets: 82 Tool holder: HSK E40 Rotary table diameter: 405 mm Max. workpiece weight: 300 kg Rapid traverse: 60 m/min MACHINE DETAILS CNC control: Roeders RMS6 Power connection: 50 Hz 3x 400 Volt Total power requirement: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 3,000 x 2,700 mm Machine weight: approx. 8,500 kg Spindle running time: 7,266 h EQUIPMENT Coolant system Water chiller Workpiece probe Laser tool control system Chip conveyor Workpiece magazine Setup stations (number): 31 Electronic handwheel Lighting

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Codpfeyhnudex Afpspu Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2000, operating hours: 19,467 h, functionality: fully functional, machine/vehicle number: 1100 0000323, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, controller model: HEIDENHAIN 430, spindle speed (max.): 12,000 rpm, The spindle of the machine was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Cjdjyhnm Topfx Afpopu Travel Z-axis: 550 mm Number of axes: 5 Table length: 630 mm Table width: 500 mm Centering bore diameter: 50 mm Maximum workpiece weight on table: 600 kg Number of pallets: 2 Pallet dimensions: 500 x 500 mm Maximum load capacity: 600 kg Tool magazine - number of tool stations: 60 Maximum tool diameter: 100 mm Diameter with adjacent spaces free: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Tool holder: SK 40 DIN 69871 Spindle speed (stepless): 20 – 12,000 rpm Feed rate: 1 – 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN 430 Connection: 50 Hz 3x 400 V DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,902 x 2,687 x 2,484 mm Machine weight: approx. 9,500 kg Operating hours: 19,467 h EQUIPMENT Cooling unit Coolant through spindle (IKZ) 17 bar Pallet changer Lighting Rotating viewing window

Condition: used, machine/vehicle number: 499, Universelle Stanzmaschine - Universal Punching machine SKAG SP347Serial-No. SP347 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Csdpoh Axmbsfx Afpopu

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Cjdoygv Upspfx Afpopu Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition. Codpeygv Shefx Afpspu

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Cpjdpjygwz Rofx Afpeu Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.