Used Upstroke for sale (31)

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification 6000mm infeed capacity Right-to-left feed orientation Prsdpfx Aij Agnz Nsrec HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Pjdpfxjz Tdbhe Airerc Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Working speed 7.5mm/s Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Light guard

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 Predjwybcyjpfx Airsc OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW

Condition: used, Year of construction: 1972, Press force: 150 t Stroke: 180 mm Frame width: 300 mm Side frame opening: 180 mm Shut height (stroke up): 300 mm Table area: 570 x 410 mm Table height above floor: 875 mm Ram area: 180 mm Prodpfxjzymlqj Airec Downstroke speed: 250 mm/s Upstroke speed: 160 mm/s

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS Prjdpfx Aijpygyderoc BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1998, Press force: 3500 t Stroke: 900 mm Frame width: 3200 mm Side frame opening: 2200 mm Shut height (stroke up): 1700 mm Table area: 3150 x 2150 mm Table height above floor: 500 mm Ram area: 3150 x 2400 mm Downstroke speed: 400 mm/s Prjdpfx Aiozypa Rsrec Upstroke speed: 210 mm/s

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,800 kg, total height: 2,160 mm, This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine. Additional information • Operating mode: Automatic • Mitre cutting range: 0° – 60° • Drive: 3 kW, 3x400V, 50 Hz • Saw band size: 4780 x 34 x 1.1 mm • Material loading height: 770 mm • Shortest length of rest: 220 mm Prsdpfx Aiex D Iwpjrjc • One upstroke: 750 mm • Maximum weight of material: 2500 kg • Saw band speed: 20 – 120 m/min • Disconnected, currently cannot be operated, but was fully operational prior to factory relocation. • The seller can dismantle and load the machine for transport. • Not the main company bandsaw due to bulky size relative to material processed. Dimensions Machine Depth 3350 mm

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Pjdpfozyl Ansx Airsrc Shut height (stroke up): 1400 mm Table area: 3000 x 2000 mm Table height above floor: 430 mm Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage.

Year of construction: 2023, condition: ready for operation (used), total width: 1,800 mm, total height: 2,700 mm, pressing force: 143 t, product length (max.): 4,000 mm, Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details. • Type: CNC hydraulic press brake • Working length: 3,100 mm • Max bending thickness: 6 mm at 3 meters • Distance between uprights: 2,550 mm • Throat depth: 400 mm • Daylight opening: 515 mm • Punch stroke: 250 mm • Table width: 80 mm • Fast approach speed: 0–180 mm/s • Working speed: 0–20 mm/s • Return/upstroke speed: 0–160 mm/s • Max hydraulic pressure: 275 bar • Main electric motor power: 15 kW • CNC control: CybTouch 15 PS (15" touchscreen, 2D programming, automatic bend sequence detection) Prjdpfx Aey E I Adoirec • Axis configuration: Rear gauge with 2 controlled axes (X + R) Additional equipment • Two heavy-duty front support arms • Front guides movable longitudinally • Adjustable-height front supports • Laser safety system AKAS-LC • EU-compliant operator safety system • Pneumatic folding/hemming table • Mechanical grip for lower tools • Tooling included: • Punch: Knife P120.35.R08, height 120 mm, angle 35°, radius R0.8, sections 3 x 835 mm + 1 x 805 mm • Bottom die/block: Model M460.R, V openings 16/22/35/50 mm, sections 3 x 835 mm + 1 x 805 mm, suitable up to 6 mm sheet metal

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Shut height (stroke up): 830 mm Prjdezypmwspfx Airec Table area: 620 x 520 mm Table opening: 150 mm Table height above floor: 600 mm Ram area: 150 mm Downstroke speed: 120 mm/s Upstroke speed: 30 - 450 mm/s

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 Pjdpfsh H Duhsx Airerc STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 1994, working width: 1,200 mm, pressing force: 25 t, working range: 1,200 mm, High Quality Used AMADA PROMECAM ITS2 25-12 1.2metre x 25ton cnc pressbrake for sale Year 1994 Specification 25 TONS X 1250 HYDRAULIC UP STROKING 3 AXIS CNC PRESS BRAKE COMPLETE WITH HURCO AUTOBEND 7 CNC CONTROL description TYPE HYDRAULIC UPSTROKING CONTROL HURCO AUTOBEND 7 BENDING PRESSURE 25 TONS BENDING LENGTH 1250 STROKE LENGTH 100 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS Y X AND R Prjdpfx Aierhirzsrjc SIDE FENCING REAR INTERLOCKED

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Pressing force 300 to Stroke 500 mm Area between the columns 1250x1000 mm Installation height 1000 mm Rapid traverse 22 mm/s Working speed 2 mm/s Motor 7.5 kW Length 2000 mm Width 1500 mm Height 3300 mm 4-column guide Round ram guide Table and ram with T-slots Prjdpfx Aevgncnsiroc 2-hand operation Operating instructions Siemens touchscreen control and electric control panel NEW , 50 programs storable, for programming of: - Upstroke and downstroke rate - Pause time in the floor - Decompression time - Setting the working pressure - Piece counter - Prestop in upward and downward movement - Setting for manual and automatic movement - Management of alarms and anomalies

Year of construction: 1985, condition: used, Used HUGH SMITH 1000 Ton Hydraulic 4 Post Downstroking Press for sale Operating Speeds 50 mm/sec. Gravity approach. 6 mm/sec. Pressing. 50 mm/sec. Return. Working Height 1060 mm. Press Weight 102 tons total. Pedpfxjf A R Uze Airerc Towler Hydraulics. Machine originally upstroke (see original drawing attached) but converted to downstroke and refurbished in 1985 (see updated drawing attached) with new electrics. Brand new c, h and d frame hydraulic presses for sale – can quote at competitive prices and built to your specification. New 1000ton hydraulic presses available for sale upon request

Year of construction: 1998, condition: good (used), AMADA PROMECAM ITS2 2512 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE MODEL ITS2 2512 YEAR 1998 CONTROL OPERATEUR 2 TONNAGE 25 TONS LENGTH 1250.0 mm NO OF AXES 4 AXIS CNC GUARDING SICK OPERATOR LIGHT GUARD TOOLING FULL SET OF CLAMPS Prsdpfx Aopz Igieiroc PLUS UPSTROKING HYDRAULIC PRESS BRAKE FOOT CONTROL PENDANT FULL SET OF MANUALS FULL SET OF CLAMPS SET OF TOP AND BOTTOM TOOLING

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Prsdpfx Aiehw Ng Iorsc Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: new, neu ca. 4 Monate ab Auftragse Italien 35400 € 676.14 € 40 to 500 mm 700x350 mm 700x500 mm 500 mm 250 mm 26 mm/s 9 mm/s 4 kW 1500 mm 1000 mm 2500 mm 1500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve Predpfx Aijynm Hrerjc € 3.700,- Pressure switch € 900,-

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 20 t, Single-column press – Manufacturer: Durendus – 3–20 t hydraulic press – Table 1000 × 400 mm For sale is a hydraulic single-column press (C-frame) from Durendus with an adjustable pressing force of 3 to 20 t. This compact and robust machine is ideal for assembly, pressing, and light forming operations in the workshop and production environments. ==== Technical data & Information: Hydraulic Single-Column Press – 3–20 t ==== General Information - Manufacturer: Durendus - Model: assembly press / single-column press - Design: C-frame press - Pressing force: 3 – 20 t (adjustable) - Machine weight: approx. 1,200 kg - Paintwork: RAL 7035 (light grey) / RAL 2009 (orange) ==== Working Area - Max. distance table – ram: 500 mm - Stroke / travel: 500 mm - Table height: 940 mm ==== Table & Ram - Table plate: 1,000 × 400 × 40 mm - Ram: Ø 250 mm, round, interchangeable ==== Speeds - Downstroke speed: 2 – 10 mm/s (adjustable) - Upstroke speed: 20 mm/s ==== Hydraulics - Motor power: 2.2 kW - Oil tank capacity: 60 l - Pump: Agro-Hytos or equivalent ==== Equipment & Operation - Pressure adjustment via rotary knob - Robust machine frame - Control cabinet technology from renowned manufacturers - Emergency stop ==== Documentation & Delivery - CE declaration - German-language documentation - Installation, commissioning, and training available at extra charge ===== Assembly work, pressing operations, workshop applications, small series production, light forming operations Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die set-up press, tryout press, tool tryout press Prjdpfx Ajx Ap Utsirjc Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our major strength is in special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses are equipped mainly with components from leading European manufacturers.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 62500 € 1181.25 € 150 to 500 mm 800x400 mm 900x600 mm 500 mm 300 mm 20 mm/s 3 mm/s 4 kW 2200 mm 1500 mm 3000 mm 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Prjdeynmqkjpfx Airoc Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 63500 € Prjdpfx Aoynnfpoirec 1200.15 € 70 to 500 mm 900x700 mm 600 mm 25 mm/s 6 mm/s 4 kW 1140 mm 940 mm 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 38200 € 729.62 € 70 to 500 mm 700x350 mm 700x500 mm 500 mm 250 mm 24 mm/s 5 mm/s 4 kW 1500 mm 1000 mm 2500 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Predpsynm Hljfx Airec Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 74800 € 1413.72 € 100 to 500 mm 1000x800 mm 600 mm 26 mm/s 5 mm/s 4 kW 1260 mm 1060 mm 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom Prjdpfx Aeynm H Ssirec • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 82000 € 1549.8 € 200 to 500 mm 870x500 mm 1000x600 mm 500 mm 300 mm 21 mm/s 3 mm/s 7.5 kW 2300 mm 1500 mm 3000 mm 8200 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Pedpfjynm Hxox Airjrc Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 120000 € 2268 € 300 to 500 mm 1000x500 mm 1200x800 mm 600 mm 400 mm 22 mm/s 2 mm/s 7.5 kW 2300 mm 1500 mm 3100 mm 11200 kg 4-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Predeynm H Espfx Airjc Oil cooler with decompreission valve € on Request Pressure switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter Prsdpfx Aijynm Iceroc € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request