Used V-Belt for sale (22,390)

Condition: good (used), V-belt pulley, belt pulley Laodpfevqbbxex Aansk -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

Condition: excellent (used), Year of construction: 1994, Motor data: 380 V - 50 Hz - 62 A Laodpsgg R Trjfx Aansk 2 grinding units Burste electric height adjustment grinding width: 1100 mm operating pressure: approx. 8 bar grinding belt length: 2150 x 1130 mm weight: approx. 3500 kg dimensions: W/D/H approx. 2100/2500/2300 mm

Condition: ready for operation (used), Year of construction: 1995, The machine was in operation until the company closed down about 12 months ago. 2 sanding belts + brush Lasdpjw E Dzisfx Aanek

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications Ljdpfxopag Tts Aaneak belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: used, V-belt pulley, belt pulley -Diameter: 450 mm -Total width: 130 mm -Straps: 6 Laodpfoct H Tzsx Aanjk -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller Lodpfepag Tdex Aaneak - Graphite coating - Separate emergency stop button - Base frame

Condition: good (used), Conveyor belt for removing waste from the three-knife trimmer Cologic VCZ-BAAN Made in Netherlands Laodsx Nct Sepfx Aanjk Working width: 40 cm. Offcuts are discharged directly from under the machine into a container.

Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Max working width 1800 mm Laodpfxox I Nz Ho Aanjk Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: as good as new (ex-display), The scope of delivery includes: 01x stand protection, II. choice Material color: yellow Total height: approx. 1.000 mm Total width: approx. 128 mm Lodpfx Aaolikw Hsnoak inner width: approx. 120 mm material thickness: approx. 4,00 mm Weight: approx. 5,23 kg | pcs. Each side: 2 drill holes Ø approx. 11 mm Dimension center - center hole: approx. 900 mm

Condition: excellent (used), CATALOG NUMBER 7595 Ljdpfxsv R E Amo Aaneak Technical data: - Loading hopper inlet: 1400x1400mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 600mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife dimension: 40x40mm - V-Rotor - Screen: 10mm - Hydraulic pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg ADVANTAGES – Made in Germany – V-Rotor – Technical documentation (DTR) – Hydraulic pressure drawer – Auto-reverse – Used chipper in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: used, first registration: 10/2011, Year of construction: 2011, M&V 902 Container Chassis High Cube Extendable ● ABS Ledjx Nc D Depfx Aansak ● Air suspension ● Lift axle ● Raise/lower system ● 3 x SAF axles with disc brakes ● Tyres: 385/55 R 22.5 ● Container mounts: 20 ft / 2 x 20 ft / 1 x 30 ft / 1 x 40 ft ● Gross weight: 39,000 kg ● Unladen weight: 6,300 kg ● Payload: 32,700 kg !! Extendable at rear and in the middle !! - German semi-trailer - TÜV / MOT: New on request and at extra cost! Subject to errors and prior sale! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: new, Year of construction: 2023, 50 mm 1250 mm 1345 - MK 5 Lajdpfswp S U Ssx Aanok bore depth 270 mm spindle turning speed range 56-1450 U/min

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Ledpfewfq T Sjx Aaneak Discharge of scrap from under the machine directly to the container.

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Ljdpfx Aaoxpgfionsak Table size: 1120 x 255 mm

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank We offer here a used post protection of the manufacturer Gemac for sale. The mullion protection is suitable for a frame profile width of max. 90 mm. Included in the scope of delivery: 01x post protection, used Material colour: cream white Lsdpefdqkaefx Aanoak Design: V f. Upright profile width: approx. 90 mm Total height: approx. 600 mm total width: approx. 113 mm height of deflector: approx. 60 mm Material thickness: approx. 4 mm Hole Ø: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 Kg 02x mounting plates, used Material colour: cream white Dimensions: 130 x 91 mm (WxD) Material thickness: approx. 7 mm 04x hexagon head screw: M10 x 35 mm 04x tooth nut: M10 04x washers: M10 Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: used, functionality: fully functional, empty load weight: 6,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2008, loading space length: 6,400 mm, loading space width: 2,500 mm, loading space height: 3,170 mm, total length: 9,000 mm, total width: 3,250 mm, total height: 4,000 mm, suspension: air, tire condition: 60 %, color: yellow, trailer brake: trailer braked, Year of construction: 2008, Equipment: ABS, Truck trailer with Edscha sliding roof First registration: 05.12.2008 L/W/H: 9000/2550-3250/4000 mm Internal length: 6400 mm Unladen weight: 6,920 kg Gross vehicle weight: 24,000 kg Inspection valid until: 11/2025 Ledpfox Ati Uex Aanoak Equipment: - Loading ramps, 14 t load capacity + supports - Hydraulically extendable rear portal - Lifting roof - Oversized width up to 3.25 m under tarpaulin - Interior height 3.17 m

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min Lsdpfx Aajhq Rp Honoak - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN A + 1-year warranty + Including Aquamatik (central water filling system) + Including end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity report provided upon delivery) + Year of delivery: 2024 Lsdpfxjwzvtco Aanoak Dimensions: Length: 835 mm Width: 413 mm Height: 784 mm Weight: approx. 760 kg Suitable for the following models and others: Linde E 18 Z - 322-00 Linde V MODULAR - 5213-00 Still EK 11 Jungheinrich EKS 210 Jungheinrich KMS 100 Toyota 6FBRE14 Paletrans PR17 Common battery sizes available, enquiries welcome. Transport available.

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Year of manufacture 2015. Lasdpfowxtdgox Aanok Working width 46 cm, conveyor length approx. 250 cm. Discharge of trimmings from under the machine directly to the container. Material pressing roller, upper cover preventing spillage of the excavated material.

Condition: used, trough conveyor belt conveyor belt with high load capacity total length: 1000cm tape width: 80 cm total width: 122cm Lasdpet Aagysfx Aansk steel tube frame structure. steel guide rollers strap thickness: 0.8 cm drive: currently not equipped "If required, we can add a geared motor.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery 01x post protector, used Material color: yellow Finish: V total height: approx. 750 mm total width: approx. 100 mm inner width: approx. 93 mm total depth: approx. 60 mm material thickness: approx. 3,50 mm Grid/ hole spacing: approx. 300 mm number/ holes: 06 pcs. (03 pcs./side) Hole Ø: approx. 11 mm 06x hexagon head screw: M8 x 35 mm 06x Toothed nut: M8 06x washers: M8 General information about the item: This item is offered for pickup only. A beyond that desired transport or shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: Laedoh Ei Udjpfx Aanjk (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Lodpfxjwzvquo Aanoak Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.

Condition: excellent (used), flowmeter Endress-Hauser Pulsmag V + Variomag measuring range:0,0420 m3/sec Power 0 - 20 mA Temperature max. 80 °C lining material: HG Connections DN 150 /PN16 Voltage 220 V measuring range Frequency 50 Hz Length 220 mm Width 260 mm Height 350 mm Weight 13 kg Ljdpfxsfcb Nbs Aanoak

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 784 mm, total length: 835 mm, total width: 742 mm, Tested forklift battery for your truck – 48V 6PZS 930AH – DIN A + 1 year warranty + incl. Aquamatic system + incl. end discharge lead & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol is included upon delivery) + Year of manufacture: 2024 Dimensions: Length 984 mm Width 630 mm Height 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Linde E 18 – 322-00 Linde E 18 – 386-02 – side battery change Linde E 18 Z – 322-00 Linde E 20 PHL – 335-00 Linde E 20 PHL – 386-00 Lodpfx Aaowzv A Rensak Linde E 20 PHL – 386-02 Linde V – 5213-00 Linde V – 5213-01 Linde V MODULAR – 5213-00 Linde V MODULAR – 5214-00 Toyota/BT RR-B 8 Common battery sizes available on request. Transport possible.

Condition: good (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 75,07,50,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Lodpfx Aaeic Rl Denoak Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.